Strengthing of Road (Resurfacing on 45M wide Road Metro Station To DFCCIL Office and Service Road Infront of Microsoft Office in Sec.145) Noida

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401

P/L applying tack coat using hot straight run bitumen of grade 80/100: on bituminous surface @ 0.50 Kg/Sqm.

Dense Bituminous Macadam using Hot Inplant Technology Application Hot in plant recycling technology to strengthening of existing wearing course upto 60mm thickness as perMORTH specification (Section 519- mainly Clause no. 519,4.2 and 519.6) confirming to grading of specification, Biturmen. and virgin asphalt in following proportion:- (1) Fresh Bituminous concrete confirming to Grading Specification @70% ofadditio of total mix other than recycled. (i) Bitumen VG-30 for Bitumen @ 5.5% of by weight of fresh aggregates. (ii)Binder @2% by weight of mix. Tecycling pavement by cold miling of existing bituminous layers, planning the surface agtercold milling, reclaiming excavated material to the extent of 30 per cent of the required quantity, hauling and stockpiling the reclaimed material near the central recycling plant after carrying out necessary checks and evaluation, adding fresh material including rejuvennators as required, mixing in a hot mis plant, transporting and laying at site and cornpacting to the required grade, level and thickness, all as specified in Clause 519.

providing and laying danse graded Bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading. Premixed with bituminous binder @4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with Hydrostatic paver finisher with sensor contral to the required grade. level and alignment, rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction and density compaction as per MORTH specification, clause No.505 comlete in all respects.

providing and laying Bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading. Premixed with bituminous binder @5.4 percent of mix and filler, transporting the hot mix to work site, laying with Hydrostatic paver finisher with sensor contral to the required grade. level and alignment, rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction and density compaction as per MORTH specification, clause No.507 comlete in all respects.

Painting or Varnishing with Valsper or other Approved High Grade enamel or Super par synthetic clean varnish Complete one Coat over previously painted surface including supply of all material,labour,Tools & plants etc. required for proper Completion of the work. paint to be used should Confirm ISI no.105/106/133-1950 . As in Item (647) above but for Every Subsequent Coat on previously treated Surface. (937.00+24.00=61.00 per Sqm)

providing wall putty on new surface with approved quality material of berger/ Jk/ birla or similar make 2 coats

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.