Construction of Two toilets in the primary schools at the village of Ghana and Bandhi (Through CSR activity policy of MIL).

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out

Boring holes 300mm dia. & 3.00m deep in soil for under two reamed piles and getting out and disposal of soil to a distance of n exc. 50m.

M & L hardcore of broken stone or boulder of gauge n. exc. 63mm, deposited, spread,and levelled in layers n. exc. 15 cm thick, watered and rammed to true surface.

Providing cement concrete type C-2, 1:3:6 (40mm graded aggregate)for foundation filling and mass concrete.

S&F 10 mm dia. And over TMT bar cut to length,bent to shape required including cranking, bending etc.and binding with MS wire (annealed) n-less than 0.9mm dia.

S&F 8mm dia.TMT bar cut to length,bent to shape required including cranking, bending etc.and binding with MS wire (annealed) n-less than 0.9mm dia.

Form work to side of plinth beams, Rough finished surfaces of concrete Flat.

Form work to side of shelves, lintels, roof beams, Rough finished surfaces of concrete Flat.

Form work to side of Square, rectangular column, Rough finished surfaces of concrete Flat.

Form work to soffits of suspended slabs such as roof slabs, n. exceeding 200 mm, Rough finished surfaces of concrete Flat.

Providing Reinforced cement conc. M-20 (20mm graded aggregate) in plinth beams and foundation.

Providing Reinforced cement conc. M-20 (20mm graded aggregate) in shelves,lintels and Roof beams.

Providing Reinforced cement conc. M-20 (20mm graded aggregate) in Columns.

Providing Reinforced cement conc. M-20 (20mm graded aggregate) in slabs supported on beams and columns.

M&L Brick work with subclass‘B’bricks straight orcurved on planexc 6 m mean radius with 1:4 cement mortor in straight.

M&L Brickwork with subclass‘B’ bricks, straight or curved on plan to anyradius in half brick thick walls built in 1:4 cement mortor

M&L Brickwork with sub class‘B’ bricks in one brick thick honey combwalling, built in in one brick thick honey comb work with 1:4 cement mortor.

Rendering 15mm thick cement plastering of 1:4 cement mortar on fair faces of brick work or concrete surfaces and rendreing is to be neeru finished.

Rendering 10mm thick cement plastering of 1:6 cement mortar in ceiling, Rendreing is to be finished even and smooth without using extra cement.

Rendering 15mm thick cement plastering of 1:6 cement mortar on fair faces of brick work or concrete surfaces and rendreing is to be finished even and smooth without using extra cement.

Providing Precast cement concrete Type B-1 1:2:4 (20 mm graded aggregate) for cover slabs, and set in 1:4 cement mortar.

S & F, Glazed ceramic coloured joint free tiles in vertical surface 350x 250x 7 mm /450x 350x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick cement plaster of 1:4 cement mortar.

S&F Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm Over 15 mm thick Screed bed or bedding layer of 1:4 cement mortar. in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match.

15mm thick screed bed of 1:6 cement mortar set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M &L Vitreous china squatting pan , orissa pattern ,size 580x440 mm white with integral foot rest s including flushing cistern and flush pipe

S & F Vitreous China urinals white colour, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and Union for discharge pipe.

S & F of wash basins, vitreous China (flat back or angle back type) any size 630x450mm, including cuttin for and pinning inn ends of brackets or erecting stand but exculsive of fixing of supply and waste pipe.

S&F Solid PVC Door frame of size 50 mm x 47 mm made out 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixed in opening as per specification & drawing.

S&F factory made Solid PVC Door shutter 30 mm thick ( style) consisting of frame made out of M.S. square tube for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side etc. & fixing in the frame at site as per specification & drawing.

S&F M.S. butt hinges of 100mm size medium weight, cold rolled mild steel .

S&F Alluminium alloy handles, of 150mm size cast type anodised.

S&F Aluminium, anodised, barrel tower bolts 200mm length of extruded section .

S&F M.S. grills, barred iron doors etc. conforming to Fe 410-O or Fe 310-O.

M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement.

S&F 110 mm dia PVC (SWR) junction single, ( single T), equal or unequal with access door.

S&F 110 mm dia PVC (SWR) junction single, ( single T), equal or unequal.

S&F 110 mm dia PVC (SWR) bends any radius.

S&F 110 mm dia PVC (SWR) soil, waste and vent pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S&F 110 mm dia PVC (SWR) soil, waste and vent pipes single socketed, in any length with rubber ring joints, fixed to walls.

S&F 110 mm dia PVC (SWR) vent cowl.

S& F of 1000 ltr capacity rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed as per specification.

Supply & Fixing 15 mm bore Upvc tubes with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified & directed

S & F 15 mm Bib taps standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90 gms)

Preparation of New steel surfaces of any description over 10 cm in width/girth and applying two coat of 1st.Quality Synthetic enamel paint over red oxide priming coat.Over red oxide priming coat. Colour and make as approved by EIC.

Preparation of New wall surfaces plasterd /unplastered and applying two coats of 1st.Quality distemper oil emulsion .

Preparation of New ceiling surfaces and applying two coats of 1st.Quality distemper oil emulsion .

Preparation of new plastered surfaces and applying two coat of cement paint .Colour and make as approved by EIC.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers

S K ENTERPRISES

SINGH TRADING COMPANY

R K CONSTRUCTION

C S RAJ SHEKHAR MUDLIAR

VISHWAKARMA BROTHERS CONSTRUCTION

AMARNATH ENTERPRISES

SHRI KRISHNA CONSTRUCTION