Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.5 LAccepted-Finance | L1 | Accepted-Finance lowest | |
| 2 | Rejected-Technical | - | Rejected-Technical As per recommendation of Technical Evaluation Committee |
Tender Value
₹15.7 L
EMD Value
₹23,600
Closing Date
25 Apr 2022, 5:00 pmClosed
REGISTRAR
CUSAT, COCHIN-22
Urgent Replacement of Electric Pole and OH line at CUSAT road leading to SOE Campus and Guest House.
2022_CUSAT_486677_1
CUSAT/ET/UEU /4192/21-22
Open Tender
Electrical Works
Item Rate
21 days
Thrikkakara Campus
Please refer Tender documents.
5 documents required · 5 mandatory
₹2,500
Yes
₹23,600
Yes
14 Jun 2022
18 Apr 2022
28 Apr 2022
18 Apr 2022
25 Apr 2022
18 Apr 2022
Amount
RCC POLE
od311647/2021_2022 : Supply of 9 meter length PSC pole as per KSE Board specification at site.
od311650/2021_2022 : Erection of PSC pole 9 meter length in pit and ramming the foundation, finishing with Soil on top with including excavation and refilling etc as required.
od311659/2021_2022 : Supply of one number PVC insulated and PVC sheathed Aluminium three phase cable with neutral Aerial Bunched Cable of 1.1 KV grade of the following size of reputed make.<br>95 sq mm(Ph) LT Aerial Bunched Cable
od311660/2021_2022 : Laying of one number PVC insulated and PVC sheathed/ ABC cable of 1.1 KV grade 95sqmm on the existing Pole using adequate Suspension / Dead end Clamps etc as required at site.
od311662/2021_2022 : Supply of following accessories for Hanging one number PVC insulated and PVC sheathed Aluminium Aerial Bunched Cable of 1.1 KV grade of the 95sqmm size of reputed make.<br>Anchoring Clamp
od311663/2021_2022 : Supply of following accessories for Hanging one number PVC insulated and PVC sheathed Aluminium Aerial Bunched Cable of 1.1 KV grade of the 95sqmm size of reputed make.<br>Suspension Clamp
od311664/2021_2022 : Supply of following accessories for Hanging one number PVC insulated and PVC sheathed Aluminium Aerial Bunched Cable of 1.1 KV grade of the 95sqmm size of reputed make.<br>Dead End Clamp
12.17 : Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required .
12.20 : Erection of LV/MV shackle/pin insulator etc. as required.
12.1 : Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.
12.25 : Erection of G.I. Wire No. 8 SWG including binding etc. as required.
5.2 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required
od311702/2021_2022 : Supplying and laying 4SWG copper wire at 0.50 metre below ground as strip earth<br>electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.<br>(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
90.16.1.6 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 6.00 mm copper conductor (4SWG)
od311716/2021_2022 : Convey the dismantled materials without damage to the store.
12.40 : Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required.
12.42 : Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.
od311779/2021_2022 : Dismantling of Street light in the existing pole and Reinstallation, testing and<br>commissioning of the same in newly installed post
od311783/2021_2022 : Supply and Fixing of size up to 25 sq. mm piercing connector
od311784/2021_2022 : Supply and Fixing of 25-95 sq. mm size piercing connector
od311785/2021_2022 : Supply and Fixing of Pole clamp and Eye hook by using high tensile nut bolt etc
od311844/2021_2022 : Supplying and making end termination with brass compression gland and aluminium lugs for<br>following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV<br>grade and ABC cable as required.<br>3 1/2 X 300 sq. mm (70mm) and 3x95 + 1x70 sq mm ABC cable
od311849/2021_2022 : Dismantling of existing UG cable terminations from overhead line etc
90.15.4.2 : Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
90.12.1.30 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil). 3.5 core70sq mm
9.4.20 : Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.31/2X 70 sq. mm
ENSEMBLE ELECTRIC
Bidder Name
ENSEMBLE ELECTRIC
GOSHREE ELECTRICALS PVT LTD
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .