SPECIAL REPAIR OF CERTAIN BUILDING AT SOUTH ZONE AT BINNAGURI MIL STN UNDER GE SOUTH BINNAGURI

Amount

Schedule 'A'

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and fair without using extra cement complete all as specified and as directed.

M&L for rendering 20mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 with water proofing compound as per manufacturer's instruction finished even and fair without using extra cement complete all as specified and as directed.(Note : WPC shall be measured and paid separately)

M&L for rendering 10mm thick on concrete surfaces of in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

Material & labour for 5 mm thick rendering in cm 1:3 on Ceiling or concrete surfaces even and smooth without using extra cement complete all as specified and directed

Materials and labour for applying two coats of cement base paint including preparation of new plastered surfaces as on walls complete all as specified and directed by the Engr-in-Charge

M & L preparation of new surface & applying two coats of synthetic enamel paint over a coat of pink primer to wooden surfaces exc 10 cm girth complete all as specified and as directed.

M&L applying two coat of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces over exc 10cm girth complete all as specified and as directed.

M&L for preparing new plastered surfaces of wall with wall care putty and applying two coat of distemper oil emulsion over a coat of primer complete all as specified.

Preparation of old treated surfaces of wall all as directed and applying one coat of white washing complete all as specified and directed.

All as per item No 10 here-in-before but on ceiling complete all as specified and as directed.

M&L preparing old painted wooden surface of any description not otherwise described for over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparing old painted steel surface of any description not otherwise described for over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old treated surfaces & applying one coats of cement base paint of walls, chajja,facia,slab etc for portion of building complete all as specified and as directed.

M&L for preparing old plastered surfaces of wall and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and as directed.

Demolition of cement concrete (re enforced) in roof floors, beams, staircase, landings, chajjas, pillars etc and similar suspended works using cutter, breaker and other mechanical means in ramp slab and removing materials from site of work complete all as specified and as directed.

M&L for RCC M-25 Design Mix as slabs supported on walls, beams and columns in floors,roofs,landings,balconies,canopies,deck slabs and in shelves and the like complete all as specified and as directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) including removing outside MD line complete all as specified and as directed.

M&L for 25 mm thick cement concrete type B0, 1:2:4 (20mm graded aggregate) as in floor and finished the surfaces rough to receive cement mortar screed bed complete all as specified and as directed.

M&L for PCC 100 mm thick (1:2:4) type B2( using 40mm graded agg) finishing the surface even and smooth and Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green as in hard standing complete all as specified and directed.

M&L for cement concrete type C-2, 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection, pavement etc and finished the surface even and fair with using extra cement complete all as specified and directed.

M & L for glass dividing strips, in flooring 3mm thick and inserted in position to confirm to position width of strip 38mmcomplete all as specified and as directed.

M&L for TMT bars 10mm dia and over,cut to length ,bent to shape required, including cranking ,bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90mm dia complete all as specified and as directed.

Mils steel TMT bars 5mm to 10mm dia, cut to length, bent to shape required, in stirrups, spacers and binders and binding with m8ild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for formwork to soffits of sus-pended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Ho-rizontal or sloping) finished rough in flat surface complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class 'B' old size bricks best quality straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

Dismantling floor hearth or wall tiling and interlocking paver block including cement mortar bedding or sand and removing the rubbish off the premises complete all as specified and as directed by Engr-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with M & L for screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M&L for Verified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M&L for Non Skid ceramic tiles coloured of size 300 x 300 x 7 to 8mm thick as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles with 15mm screed bed 1:6 for laying floor finishes complete all as specified and as directed.

M&L for glazed ceramic tiles coloured of size 300 x 200 x 5 to 6mm thick as in dado, skirting. riser to steps, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles complete all as specified and as directed with 10 mm screed bed 1:4 for laying wall finishes complete all as specified and as directed.

M& L for Glazed coloured ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with 10 mm screed bed 1:4 for laying wall finishes complete all as specified and as directed.

M&L for 60mm thick M-35 grade factory made vibratory compacted cement concrete rubber moulded, interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick consolidated sand cushion and joints filled with sand complete all as specified and directed.

M&L for machine pressed ,pre-polished and chemically treated, smooth finished ,exterior graded coloured cement concrete Chequered tiles 30cm x 30cm x 22-25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (European type), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet flush pipe fixed complete jointing connecting and making good the disturbed complete all as specified and as directed.

S&F in repairs vitreous china wash basin 550 x 400mm size white including brackets,CP waste coupling waste pipe, short connection complete all as specified and directed.

S&F in repairs sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm bowel size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

Taking up or down steel tubing and connections,15mm bore including cleaning for serviceable pipe for re-fixing or removal of unserviceable pipe from site of work complete all as specified and as directed.

All as per item No.41.00 here-in-above but 20mm bore complete all as specified and as directed.

All as per item No.41.00 here-in-above 25mm bore complete all as specified and as directed.

Re- fixing 15mm bore GI tubing, medium grade with provn of new fittings as required and fixing accessories in new or old position (walls, ceiling floor etc) including testing complete all as specified and as directed.

All as item No 44.00 here-in-above but 20mm bore complete all as specified and as directed.

All as item No 44.00 here-in-above but 25mm bore complete all as specified and as directed.

S&F GI tubing ISI marked medium grade,15mm bore with all fittings fixed to walls and ceiling or laid in floors including testing complete all as specified and directed.

All as item No 47.00 here-in-above but 20mm bore complete all as specified and as directed.

All as item No 47.00 here-in-above but 25mm bore complete all as specified and as directed.

S&F in repair bib taps, fancy type chromium plated with crutch or butterfly handle screwed down ,screwed for iron pipe or brass ferule of 15mm bore complete all as specified and as directed.

S&F in repair stop valve, fancy type chromium plated (medium) screwed down, high pressure with crutch or butterfly handle, screwed both end for iron pipe or for union of 15mm bore complete all as specified and directed.

S&F in repairs 15mm pillar tap, cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure, with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed.

S&F in repair 125mm dia chromium plated shower rose including arm with swivel joints including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair PVC flushing cistern syphonic action type,10 litters capacity, low level white with inlet ball, valve, float and handle including bracket and flush pipe complete all as specified and as directed.

S&F in repair 15mm bore PVC connection pipe 450mm long with PTMT nuts at bolt ends complete all as specified and as directed.

S&F in repair CP towel rail, 20mm dia,600mm long including brass CP brackets. complete all as specified and as directed.

Dismantling water tanks and removing to store exc 250 & n.exc. 500 ltr capacity complete all as specified and as directed.

S&F rotational moulded PVC water storage tank 500ltrs capacity ISI marked cylindrical vertical type multi-layered with closed top including inlet, outlet and wash out holes of approved make hoisted and fixed in position complete all as specified and as directed.

S&F 25mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and as directed.

S&F in repair steel window with side hung shutter including projecting type hinges with steel handles and steel peg stay and with glazing bars complete with dovetailed or welded including taking down of old unserviceable window complete all as specified and as directed.

Ditto but without glazing bars complete all as specified and as directed.

S&F framed work such as grills,gratings,etc with ends of bars, shouldered and / or riveted. Or forged into spikes, framed guard bars barred iron doors ladders. Framed balusters walk ways railings framework of water tanks and similar complete all as specified and as directed.

S&F in repair steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and as directed.

Hacking out old broken glass (any thickness ,size quality or description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips glazed with putty and removing materials from site of work all as directed by the Engineer-in-charge.

S&F for 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 50 sqm in each pane complete all as specified and as directed.

All as per item No.65.00 here-in-above but frosted on one side complete all as specified and as directed.

Taking down chowkat or frame with door shutter (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and as directed.

Taking down chowkat or frame with door shutter (without taking off shutter from the frame) exc. 1.5 sqm and n.exc 4 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F factory made solid paneled PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail ,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and joint together with solvent cement,, supply and fixing in the frame complete all as specified and as directed.

M & L pressed steel door frame of size 165mm x 60mm (thickness of profile 1.25mm) with one or more rebates including necessary fixing lugs , hinges, lock strike plate etc complete all as specified and as directed.

M & L pressed steel door frame of size 105mm x 60mm (thickness of profile 1.25mm) with one or more rebates including necessary fixing lugs , hinges, lock strike plate etc complete all as specified and as directed.

M&L precast cement concrete Type C2 1:3:6 (20mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

S&F 35mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton factory made shutter open rebated and prepared to receive glass, gause etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part-I, Sec-08, Clause 8.20(a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F stainless steel butt hinges 75mm size complete all as specified and as directed.

S&F 150mm MS barrel tower bolts (Dia of bolt 10mm), stove enameled black with bright bolt and fixed complete all as specified and as directed.

S&F 200mm MS barrel tower bolts (Dia of bolt 12mm), stove enameled black with bright bolt and fixed complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 125mm aluminium handles cast type anodised complete all as specified and as directed.

S&F 125mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F mild steel wire cloth galvanized 0.56mm nominal dia and average width of aperture 1.18mm fixed with tinned tack or galvanized wire staple including all cuttings, wastage etc complete all as specified and as directed.

Repair to steel window hinges (projecting or box type) including cleaning to steel window by removing scales, rust, dirt, from frames, hinges making good deformed members of windows by hammering, welding all in situ (without taking off the window) complete all as specified and as directed.

Dismantling of cast iron / AC drain pipes,75/100mm bore, including all fittings, jointed in cement mortar and taking out of trenches, if required and removing from site of work complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints ISI marked fixed complete all as specified and as directed.( jointing to be done with solvent cement) including PVC brackets) complete all as specified and as directed.

S&F 75/110mm bore PVC (SWR) Bends including fixing clip complete all as specified and as directed.

S&F in repairs 100mm dia cast iron floor trap, with grating including jointing to waste pipe in cement concrete complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheet in roof coverings complete all as specified and as directed.

S&F for pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for pre-coated galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description as in truss and similar works complete all as specified and as directed. by the Engr-in-Charge.

S&F steel work in tubular trusses i.e. Truss bottom, top bend, sides, side supports, holding plates, posts and base plate etc including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and as directed by the Engr-in-Charge.

S&F 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F 100mm bore cast iron (sand cast) soil, waste and vent pipes ISI marked in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed.

S&F 100mm CI bends (any radius) diminishes pieces or tapers complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation oards/slabs/ blankets, any thickness including cover fillets complete all as specified and as directed.

Supply & fixing anodized aluminium snap grid framework for false ceiling, size of snap grid frame work 605 mm x 605 mm C/C complete all as specified and as directed by Engineer in Charge .

Supply & fixing 6 mm dia galvanized steel wire hangers (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and as directed.

Material and labour for non asbestos, fibre reinforced cement board ceiling, 4 mm thick suiting to grid size all as per manufacturers instructions complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate ) as in surface channels and drains etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

Add or deduct for each 25mm girth or part thereof over or under 30cm ---------------- Ditto -----------.complete all as specified and as directed.

Taking down tar felt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m incl roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed .

M&L for 40 mm thick PCC (1:2:4) type B-0 with using 12.5 mm graded stone aggregate as in roof padding etc complete all complete as specified and as directed.

M & L screed bed or bedding layer 15 mm thick screed bed or bedding layer in CM (1:4) mixed with WPC as per manufacturer instruction for laying of APP membrane complete all as specified and as directed. by the Engr-in-Charge.

Supply only intergral water proofing compound (WPC) of best quality ISI marked complete all as specified and as directed.

M&L for water proofing treatment to non accessible RCC roof slab, including parapet comprising with the following courses of treatment/specified from bottom to top:- (a) Applying bituminous primer @ 0.40 Ltr per Sqm over plastered surface of roof including parapets surfaces (b) Over the priming coat laying one layer of APP based polymeric membrane of approved manufacturer, 3 mm thick of weight not less than 3.5 Kg/sqm reinforced with non woven polyester fabric of weight not less than 150 gms per Sqm. Polymeric members shall be taken to a height of 60 cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (c) Applying one coat of aluminium paint on top of APP for heat resistance @ 100ml/Sqm as per manufacturer etc complete all as specified and directed. (Note :- (i) Laying APP based polymeric membrane shall be done by torch of method or as per manufacturers Instructions. (ii) A minimum over lap of 100mm and 75 mm should be made at the end and side respectively. completed all as specified and as directed.

S & F in repairs of Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.

S&F in replacement for CP curtain rod 20mm dia with socket ,brackets and finials storeyed bldg including taking out old one complete all as specified and as directed. by Engr-in-Charge.

Supply & fixing in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless and as required framing including taking old one steel staples complete all as specified and as directed. by the Engr-in-Charge.

Supply and fix in repairs sheet glass 4mm thick ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane including hacking out old one complete all as specified and as directed.

Supply and fix in repair powder coated (minimum 50 micron) anodised aluminium frame for doors, windows, ventilators, partition with one or more rebates with stainless steel screws /including PVC protector sheeting and joining cleat for fixing etc. including taking down old one complete all as specified and as directed by Engr-in-Charge.

All as per above item 114.00 here-in-above but for ventilator shutter with 4mm thick glass fixed with EPD Mrubber beading in lower portion and .36 mm nominal dia of wire cloth aperture of ss wire cloth with ss wire staple in upper portion including 10mm dia MS square bar with 30x5 mm FI guard bar fixed to wall ditto complete all as specified and as directed.

M& Lin repair for fabrication and fixing of anodised aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium frame of size 101.6mm x 44.45mm x 2mm and section of bottom and top rail of section114mmx44.45mmx2mm thick and and lock rail shutter frame of 83mm x 44.45mm x 2 mm with and including panels of 5.5 mm thick plain/frosted float glass, and with anodised aluminium snap beading of size 18.2mmx16.66mm screed for fixing fully including double action door spring hydraulically regulated made up of 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and all necessary fittinngsand EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter ,1 no heavy duty door shutter 1no 200mm long aluminium tower bolt per shutter including taking down old one complete all as specified and as directed by the Engr-in-Charge.

M & L in repair for 12 mm Particle board, medium density, flat pressed, single layer type or three layer type with BWR type ISI marked fixed with screws to timber frame work if fixed in pelmet boxes or in narrow widths n. exc l5cm each, rebated or flat edged complete all as specified and as directed.

Supply and fix in repair 18mm thick prelaminated particle board interior grade , prelaminated both side with decorative choice laminations ISI marked, fixed with screws to timber frame work including 6mm thick teak wood leaping on cutting exposed edges fixed with adhesive and nails, polishing complete as in cup board, shelves etc and continues hinges as required and taking down old once as directed by the Engr-in-Charge.

S&F in 100 mm hasp and staple with mild steel hinge pin including bolt to hinge plate fixed with screw complete all as specified and as directed.

M & L for Providing anti termite treatment (Post construction)and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete 6313- (Part-3) 2001 Anti-termite measure in building Part 3: Treatment for Existing Building (Second revision) complete all as specified and as directed.

M & L for Providing anti termite treatment (Post construction)Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron6313- (Part-3) 2001 Anti-termite measure in building Part 3: Treatment for Existing Building (Second revision) complete all as specified and as directed.

M & L for Providing anti termite treatment (Post construction)Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors 6313- (Part-3) 2001 Anti-termite measure in building Part 3: Treatment for Existing Building (Second revision) complete all as specified and as directed.

M&L preparation of new plaster surface of ceiling and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge.

M&L in repair vitreous china Urinal, half stall type, white (excluding flushing cistern, flush pipe and wate pipe) complete all as specified and as directed.

S&F 32mm bore waste coupline of PTMT (Half or full threaded) suitable for urinals, (Minimum weight 32mm - 45gms complete all as specified and as directed.

S&F 32mm bore waste pipe for urinals complete all as specified and as directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) water closet, white complete all as specified and as directed by Engr-in-Charge.

S&F in repair Swivel shower of CP any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and as directed.

S&F in repair fancy type, chromium finish angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed.

S&F in repairs shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as specified and as directed.

S&F in repairs soap dish of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as specified and as directed.

S&F 32 bore PTMT Wash hand basin waste pipe 90 cm long complete all as specified and as directed by Engr-in-Charge.

S&F in repair of Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.

S&F in repairs 75mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints laid in floors with and including fixing clips. Including taking down old one complete all as specified and directed

S&F in repairs 75mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints laid in vertically with and including fixing clips. Including taking down old one complete all as specified and as directed.

S&F 75/110mm dia PVC ( SWR) grade single/double T with access doors including fixing clips complete all as specified and as directed.

M&L for PVC Floor trap 75/110 mm outlet, plain with grating including joining with solvent cement complete all as specified and as directed by Engr-in-Charge.

M&L in PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

S&F in PVC (SWR) vent cowl 75/110 mm bore complete all as specified and as directed.

S&F in repair Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and as directed.

S&F in repair 1000 ltr Rotational moulded polyethylene water storage tanks ISI marked (cylindrical vertical multilayered with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

S&F of 35mm thick 2nd class hard wood, plain, framed, panelled shutter factory made (two panel) with panel of timber flat on both sides (feather edged), or of veneered particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and as directed.

S&F 150 mm long Aluminium, anodised barel tower bolt (dia of bolt 10mm) of extruded section and fixed complete all as specified and as directed by Engr-in-Charge.

S&F 150mm long Aluminium, anodised handles of fabricated type complete all as specified and as directed by Engr-in-Charge.

S&F Butt hinges 100 mm size medium weight cold rolled mild steel and fixed complete all as specified and as directed by Engr-in-Charge.

M & L preparation of newly plastered surface & applying three coats of white wash on walls complete all as specified and as directed.

All as per item No 146.00 here-in-before but on ceiling complete all as specified and as directed.

M&L for 50mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in flooring and finished the surface even and smooth with using extra cement or ramp etc including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed. complete all as specified and as directed by the Engr-in-Charge.

M & L mild steel TMT Bars 6mm to 8mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip) complete all as specified and as directed.

M&L for Providing precast RCC cement concrete type B1 (using 20 mm graded aggregate) in landings, cover slabs (for man holes etc.) challah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and as directed.

M&L for Providing water proofing treatment to sunken floor complete all as per following specification :- (i) Providing 10mm thick cement plaster in cement mortar 1:4 and mixed with liquid integral water proofing compound conforming to IS2645-1983@ 200Ml per 50 Kg of cement and finished even and smooth surface without using extra cement over two coat of cement slurry mixed with WPC in proportion 1;4:7 (Water Cement) (ii) Application of Two Coats of Polymer modified bituminous elastomeric water proof coating i.e proof coat black of Pidilite @ approx 0.50 kg per sqm for two coats of 300 micron each. (a) The rate includes for preparation of surface treatment and sealing of all joints cracks corners and junction of pipes etc and ponding test complete all as specified and as directed. (b) PCC filling shall be measured and paid separately.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in filling Sunken complete all as specified and directed.

M&L for 75mm thick cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) in sub base / leveling course of flooring / hard standing compacted using screed vibrator complete all as specified and directed.

M&L for cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) in flooring / hard standing and surface channels and drains and finishing the concrete surface even and fair without using extra cement compacted using screed vibrator complete all as specified and as directed.

M&L for Forming construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and as directed.

M&L for Forming 12mm thick expansion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' for 150mm thick flooring complete all as specified and directed.

M&L for Precast cement concrete 1:2:4 type B1 (Using 20mm graded stone aggregate) in landings, bed plates, pintle blocks, anchorange bolcks, area drain cover slabs shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

M&L for Fair finish flat from work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc complete all as specified and as directed.

S&F RCC class NP 2, 300mm bore pipes laid and jointed complete with collars complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) in concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for pipes of 300mm bore complete all as specified and as directed.

Bore packing of all the Spouts to be done with grouting admixture mixes with Cement Concrete / Mortar @225 ml per bag of Cement and providing 40 MM dia GI pipe spourt of required length complete all as specified and as directed.

S&F for SGSW drain pipe of size 200 mm dia (grade A) laid in trenches and jointed in cement mortar (1:1) complete all as specified and directed

M&L for concrete bed in cement concrete 1:3:6 type C2 to drain pipes of 200 mm bore including packing under and hunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S&F in salt-glazed stoneware gully traps, square or round mouthed, type `P' of size 180X150mm complete all as specified and directed.

M&L Cutting into existing manholes for connecting new drain of 200mm dia pipe and making good two pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 and finished and reforming benching as required complete all as specified and directed.

Taking down carefully aluminium point wiring for one light, socket or power etc incl all fittings such as switches sockets, holders, light fittings, fan regulators etc and making good the disturbed surface of wall ceiling complete all as specified and as directed.

M&L for point wiring with two single core 1.5 Sq.mm size multistranded copper conductor PVC insulated cables and one single core 1.5 Sq.mm size green colour PVC insul-ated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including rigid PVC CONDUIT and conduit accessories, confirming to IS specifications, Concealed in wall fixing on ceiling/trusses with suitable clamps , screws etc., including cutting chasing of existing wall but not less than 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc., including connecting up and testing , all as specified and as directed for :- One light point controlled by one way switch 5/6 amps.

One Ceiling fan point controlled by one way switch 5/6 amps & regulator complete all as specified and as directed.

One Exhaust fan point controlled by one way switch 5/6 amps. Complete all as specified and as directed.

One socket out let 5/6 amps point on the same board complete all as specified and as directed.

One socket out let 5/6 amps point on the independent board complete all as specified and as directed.

One light point controlled by two way switch 5/6 amps complete all as specified and as directed.

All as per item No 168.00 here-in-above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and as directed.

All as per item No 168.00 here-in-above but with two single core 4sqmm size cables and one 4 sqmm green colour cable as earth continuity conductor for AC meter plug top & socket or one water geyser point complete all as specified and as directed.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flush type complete all as specified and directed.

S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and directed by Engr-in-Charge.

S&F switch piano flush type 5/6 amps single pole one way complete all as specified and as directed. by Engineer -in-Charge.

S&F of switch piano type 2 way 5/6 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge.

S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed.

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.

M & L for lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and directed.

S & F deluxe fan Electronic regulator AC 50 Hzs rotary step white/ivory finish complete all as specified and directed.

S&F LED tube light fitting 4 feet with aluminium housing & integrated driver, with high efficient LEDs 20/22 watt, with all accessories, suitable for operation on Ac, single phase 220 / 230 Volts, 50 Hz supply, including taking down old u/s tube light fitting complete all as specified and as directed.

S&F LED Bulkhead luminaire 10W energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs, including taking down old u/s fittings complete all as specified and as directed..

S & F Linear and compact 7 W LED 2 feet suitable for mirror light fitting including taking down old u/s fittings complete all as specified and as directed..

S & F LED street light fitting 30 watt in aluminium PDC housing, toughened glass cover with IP66 protection complete all as specified and as directed.

M&L for street light bracket made out of GI pipe light grade 25 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with runts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified and as directed.

M&L for sub main wiring with 2 run of 6.00 sqmm for neutral and phase and One run of 6 sqmm sqmm size green colour PVC insul-ated,multistranded copper conductor as earth continuity conductor (nominal cross-sectional area) PVC insulated unsheathed single core cable of working voltage 1100 volts grade with stranded copper conductor drawn in PVC rigid non- metallic conduit complete all as specified and as directed. (NOTE : (i) Three run of submain wiring cable alongwith 25 PVC conduit pipe shall be measured as one unit length._

S & F MCB, DB, TPN, 4 ways (8+12 WAYS), DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed.

S & F MCB, TPN, 10KA, 240V, "C" curve, 32 A, ISI marked complete all as specified and as directed.

S&F MCCB 4P 16 KA of rating 100 A incl electric connection complete all as specified and as directed.

S&F Sheet metal enclosure for 8way Distribution Boards (DB’s), double door, single pole and neutral with 200 amps rated bus bar, IP-43 protection suitable for fixing MCB"S/isolators with and incl blanking plates complete all as specified and as directed.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), IP-43 double door, Triple pole & neutral with 200 amps rated bus bar, IP-20 protection, including four pole MCCB with blanking plates complete all as specified and directed.

S&F MCB Single pole and neutral 40 amps, 240 volts, ‘C’ curve, 10KA all complete as specified and as directed.

S&F MCB Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed

Taking out Ceiling Fan 1200 mm sweep from its position and Refixing ofter B/R plaster work complete all as specified and as directed.

M&L in replacement for Earthing complete with galvanised steel plate electrode of size 600x600x6.30mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised 4 mm dia earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron pipe 15mm bore (Light grade) for building LT wall panel all as directed including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm diameter MS bar finnel wire mesh 20 mm bore galvanised iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil with and including taking down the old one complete all as shown in electrical plate No 3 of SSR Part I 2009 including testing on completion all as specified and directed. Note: The Rate for Taking down the old unsv Earthing shall be deemed to be included in the unit rate complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation of poles/stays/cables etc and getting out in any type of soil complete all as specified and as directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers n.exc 25cm complete all as specified and as directed.

Removing excavated material n.exc 50m and depositing were directed at a level n.exc. 1.5m above the starting level complete all as specified and as directed.

M&L for sand cushioning in cable trenches over & under the cable, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed by Engr-in-Charge. (Punned thickness 18 cm shall be considered for payment as per para 19.75 of SSR Part-I)

Supply and laying for brick protection for protection of cable over sand cushioning cables inside the trench by using common brunt clay building bricks sub-class “B” old size brick and flat and width wise along the axis of the trench complete all as specified and directed by Engr-in-Charge.

Supply and fixing 25 mm dia GI tubing medium grade ISI marked laid in trenches / laid under floor including all fittings such as elbow, union, reducer, tees, bends, etc and short length complete all as specified and directed.

S & F gun metal globe or gate valve 25mm dia,ISI marked with iron wheel head, screwed both ends including all necessary accessories complete all as specified and directed

M&L for Water Heater storage type 25 ltr 240 volt 5 star rated including provision of Hot and Cold PVC connection complete with all accessories complete all as specified and as directed.

S&F angle stop valve with wall flange, chromium plated, screwed down (CP) of size 15 mm fancy type complete all as specified and directed.

Supply and fixing Hot and cold water connection including connection pipe complete with all necessary items complete all as directed and specified

M&L for RCC M-25 (Design Mix) as in beams, cantilevers, lintel over 1.5m span complete all as specified and as directed.

M&L for fair finished flat formwork to sides and soffits of floor or roof beams, lintel, cantilevers, shelves incl supports, etc complete all as specified and as directed.

M/s Debendra Prasad Gupta

M/S.TIRUPATI CONSTRUCTION

T. P. ANIL KUMAR

STAR CONSTRUCTION

M. P. Sitani and Sons

MAA BHAGWATI ASSOCIATES

M/S R. K. INDUSTRIES

CHAKRABORTY AND SONS