Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.0 LAccepted-AOC | ₹31.0 L Quoted ₹31.2 L | L1 | Accepted-AOC BEING LOWEST TENDERER |
| 2 | L2₹35.2 L+₹3.9 L (12.5%)Rejected-Finance HQ CE SC PUNE | PUNE | MAHARASHTRA | 410301 | ₹35.2 L+₹3.9 L (12.5%) | L2 | Rejected-Finance Being L2 |
| 3 | L3₹37.1 L+₹5.9 L (18.9%)Rejected-Finance 121 MADHAV SQUAR OPP AVANTIKA COMPLEX LIMDA LANE JAMNAGAR 361001 | JAMNAGAR | GUJARAT | 361001 | ₹37.1 L+₹5.9 L (18.9%) | L3 | Rejected-Finance Being L3 |
| 4 | L4₹37.7 L+₹6.5 L (20.7%)Rejected-Finance PLOT NO P PARASNAGAR NR SBI BANK NARSANG TEKRI PORBANDAR 360 575 | PORBANDAR | GUJARAT | 360575 | ₹37.7 L+₹6.5 L (20.7%) | L4 | Rejected-Finance Being L4 |
| 5 | L5₹38.4 L+₹7.1 L (22.7%)Rejected-Finance 103 HARIAKSH PLAZA HOSPITAL ROAD BHUJ KUTCH GUIARAT 370001 | BHUJ | KUTCH | GUJARAT | 370001 | ₹38.4 L+₹7.1 L (22.7%) | L5 | Rejected-Finance Being L5 |
| Sl No | Description | Qty | Unit | K B N TRADERS L2 | SURESH ELECTRICALS L3 | Vijay Construction Co L5 | Vastushilp Building Designer L8 | VIVEK JITENDRABHAI KATAR L6 | AADESH CONSTRUCTION L4 | SANVI ASSOCIATES L1 | shree chamunda enterprise L7 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.00Schedule 'A' B/R | |||||||||||
| 1.00 | Material & Labour for Pre-cast cement concrete block masonry (Type C-1, 1:3:6 (20mm aggregate) in with solid blocks, exc. 10 cm in width and setting in Cement Mortar 1:6, complete all as specified and directed by Engineer-in-charge. | 13 | Cubic Metre | 6,851 ₹89,063 Lowest | 9,500 ₹1,23,500 | 7,500 ₹97,500 | 9,200 ₹1,19,600 | 8,510 ₹1,10,630 | 8,250 ₹1,07,250 | 8,000 ₹1,04,000 | 10,010 ₹1,30,130 |
| 2.00 | Material & Labour for rendering 15mm thick on concrete surfaces in cement mortar 1:4 and even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge. | 50 | Square Metre | 441 ₹22,050 | 520 ₹26,000 | 450 ₹22,500 | 456 ₹22,800 | 460 ₹23,000 | 391 ₹19,550 Lowest | 420 ₹21,000 | 605 ₹30,250 |
| 3.00 | Material & Labour for 10mm thick rendering in Cement Mortar 1:6 to concrete surfaces trowelled to even & smooth w/o using extra cement, complete all as specified and directed by Engineer-in-charge. | 50 | Square Metre | 401 ₹20,050 | 650 ₹32,500 | 450 ₹22,500 | 365 ₹18,250 Lowest | 460 ₹23,000 | 465 ₹23,250 | 400 ₹20,000 | 605 ₹30,250 |
| 4.00 | Material & Labour for preparing surfaces plastered or un-plastered new surface of walls applying two coats of oil bound distemper over a coat of primer over layer of 3mm smooth Putty finish as per manufacture instruction with smooth roller finish, complete all as specified and directed by Engineer-in-charge.
Note: - After painting, cleaning of all floors, glass & Furniture by own arrangement. | 50 | Square Metre | 144 ₹7,200 | 210 ₹10,500 | 150 ₹7,500 | 210 ₹10,500 | 130 ₹6,500 | 165 ₹8,250 | 110 ₹5,500 Lowest | 163 ₹8,150 |
| 5.00 | Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper over a coat of primer over layer of smooth Putty finish two coats as per manufacture instruction with smooth roller finish, complete all as specified and directed by Engineer-in-charge.
Note: - After painting, cleaning of all floors, glass & Furniture by own arrangement. | 20 | Square Metre | 255 ₹5,100 | 200 ₹4,000 | 95 ₹1,900 Lowest | 250 ₹5,000 | 150 ₹3,000 | 165 ₹3,300 | 120 ₹2,400 | 151 ₹3,020 |
| 6.00 | Supply & Fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (±0.2mm). Window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding interlock (one vertical length in each shutter) (45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket. 1.2 ±0.2mm thick galvanized steel frame (30mm x 18mm) 2 Nos, sliding sash (30mm x 18mm) 2nos, sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100m long fastener. Hardware (touch lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate excludes cost of glass and includes all other connected accessories) area n.exc.2.00 sqm each fixed from ground floor to any height of floors complete all as specified and as directed by Engineer-in-charge. | 8 | Square Metre | 1,455 ₹11,640 Lowest | 21,000 ₹1,68,000 | 18,000 ₹1,44,000 | 25,000 ₹2,00,000 | 20,000 ₹1,60,000 | 22,500 ₹1,80,000 | 18,500 ₹1,48,000 | 20,501 ₹1,64,008 |
| 7.00 | Supply & Fixing 7mm thick aluminium grills of make "Deco grill" model DG 104 surrounded by aluminium 'C' channel and size of opening 75x75 mm, complete all as specified and directed by Engineer-in-charge. | 12 | Square Metre | 680 ₹8,160 | 450 ₹5,400 Lowest | 750 ₹9,000 | 740 ₹8,880 | 710 ₹8,520 | 950 ₹11,400 | 690 ₹8,280 | 851 ₹10,212 |
| 8.00 | Supply & Fixing factory made uPVC white colour fixed window/ventilator made of extruded profile with wall thickness of 2.3 mm (±2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (one vertical length in between two shutters) (60mm x74mm). Glazed bead (35mm x 20mm) will be mitered cut and fusion welded at all corners. Including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 ±0.2mm thick. Galvanized steel frame (28mm x 21.5mm), T profile (27mm x 17mm) to be inserted in repair profile. Frame will be fixed to the wall with 8mm x 100mm long fasteners. 5mm thick glazing with selected quality glass (Note: The unit rate excludes cost of glass and includes all other connected accessories.) area n. exc. 1.00 sqm each fixed from ground floor to any height of floors complete all as specified | 2.7 | Square Metre | 12,136 ₹32,767.2 Lowest | 13,500 ₹36,450 | 15,800 ₹42,660 | 15,980 ₹43,146 | 15,000 ₹40,500 | 13,500 ₹36,450 | 14,000 ₹37,800 | 17,552 ₹47,390.4 |
| 9.00 | Supply & Fixing 5mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed by Engineer-in-charge. | 18 | Square Metre | 555 ₹9,990 | 600 ₹10,800 | 650 ₹11,700 | 650 ₹11,700 | 510 ₹9,180 | 486 ₹8,748 | 450 ₹8,100 Lowest | 651 ₹11,718 |
Tender Value
₹31.4 L
EMD Value
₹63,000
Closing Date
12 May 2026, 6:00 pmClosed
GE (I) CG PORBANDAR
COAST GUARD DHQ NO 1, OPP BIRLA FACTORY
PROVN OF CERTAIN REV WORKS AT CGDHQ 01 AND ICGAE PORBANDAR UNDER GE (I) CG PORBANDAR
2026_MES_761079_1
8185A/E8
Open Tender
Civil Works - Others
Item Rate
180 days
PORBANDAR
AS PER NIT
9 documents required · 9 mandatory
₹500
GE (I) CG PORBANDAR
₹63,000
Yes
10 Jul 2026
20 Apr 2026
14 May 2026
20 Apr 2026
12 May 2026
6 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0 | Schedule 'A' B/R | - | - | - | - |
| - | Material & Labour for Pre-cast cement concrete block masonry (Type C-1, 1:3:6 (20mm aggregate) in with solid blocks, exc. 10 cm in width and setting in Cement Mortar 1:6, complete all as specified and directed by Engineer-in-charge. | - | Cubic Metre | - | - |
| - | Material & Labour for rendering 15mm thick on concrete surfaces in cement mortar 1:4 and even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge. | - | Square Metre | - | - |
| - | Material & Labour for 10mm thick rendering in Cement Mortar 1:6 to concrete surfaces trowelled to even & smooth w/o using extra cement, complete all as specified and directed by Engineer-in-charge. | - | Square Metre | - | - |
| - | Material & Labour for preparing surfaces plastered or un-plastered new surface of walls applying two coats of oil bound distemper over a coat of primer over layer of 3mm smooth Putty finish as per manufacture instruction with smooth roller finish, complete all as specified and directed by Engineer-in-charge.
Note: - After painting, cleaning of all floors, glass & Furniture by own arrangement. | - | Square Metre | - | - |
| - | Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper over a coat of primer over layer of smooth Putty finish two coats as per manufacture instruction with smooth roller finish, complete all as specified and directed by Engineer-in-charge.
Note: - After painting, cleaning of all floors, glass & Furniture by own arrangement. | - | Square Metre | - | - |
| - | Supply & Fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (±0.2mm). Window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding interlock (one vertical length in each shutter) (45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket. 1.2 ±0.2mm thick galvanized steel frame (30mm x 18mm) 2 Nos, sliding sash (30mm x 18mm) 2nos, sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100m long fastener. Hardware (touch lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate excludes cost of glass and includes all other connected accessories) area n.exc.2.00 sqm each fixed from ground floor to any height of floors complete all as specified and as directed by Engineer-in-charge. | - | Square Metre | - | - |
| - | Supply & Fixing 7mm thick aluminium grills of make "Deco grill" model DG 104 surrounded by aluminium 'C' channel and size of opening 75x75 mm, complete all as specified and directed by Engineer-in-charge. | - | Square Metre | - | - |
| - | Supply & Fixing factory made uPVC white colour fixed window/ventilator made of extruded profile with wall thickness of 2.3 mm (±2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (one vertical length in between two shutters) (60mm x74mm). Glazed bead (35mm x 20mm) will be mitered cut and fusion welded at all corners. Including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 ±0.2mm thick. Galvanized steel frame (28mm x 21.5mm), T profile (27mm x 17mm) to be inserted in repair profile. Frame will be fixed to the wall with 8mm x 100mm long fasteners. 5mm thick glazing with selected quality glass (Note: The unit rate excludes cost of glass and includes all other connected accessories.) area n. exc. 1.00 sqm each fixed from ground floor to any height of floors complete all as specified | - | Square Metre | - | - |
| - | Supply & Fixing 5mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed by Engineer-in-charge. | - | Square Metre | - | - |
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
BOQ_852512.xls
BOQ • 0.37 MB
8185AT.pdf
Tender Documents • 4.70 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .