PROVN OF PARTITION WALL, FALSE CEILING, BIRD PROOFING AND COVERED PATHWAY AT CERTAIN LOCATIONS AT CGDHQ_15, OKHA UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) .

Taking down chowkhats with shutters exc 1.50 sqm but n exc 4.00 sqm (without taking off shutters from the frame)

Taking down chowkhats with shutters n exc 1.50 sqm (without taking off shutters from the frame)

Dismantling of Stone slabs and tiles of any description laid bedded and pointed in cement mortar.

S&F mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (excludingof steel sheeting or other covering, running rails and guides and hanging, also fastening and fixing complete of FE - 290 (Gde E-165)

M&L dark shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1 :6

Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc complete all as specified.

S&F PVC net with 25 x 25mm mesh having weight of 650 gms per sqm to MS frames/wall surface/ceiling surfaces of any description at any height complete all as specified.

M&L Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.

M & L providing 75mm thick cement concrete type C-2,1:3:6 (40 mm graded aggregate) as in sub base.

M & L Sand filling under floors including watering and consolidation

M & L 60 mm thickness, M-35 Grade Machine pressed precast conctete interlocking paver block with grey colour cement and pigment of any shape and size confirming to IS 15658-2006

Laying only 60 mm thickness, Machine pressed precast conctete interlocking paver block of any shape, pattern and size complete all as directed.

M&L for PCC type C1, 1 : 3 : 6, (20mm graded aggregate) as in precast cement concrete in window or door cills, lintels, bressumers, steps, quion blocks ( use with masonry), string courses, copings, kneelers, apex stones, road kerbs, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bounders (for stone walling), corbels, brackets, etc (of any section indicated), with plain fair faces including chamfers, weatherings, throating etc, and setting in mortar complete with joints to match.

S&F for steel work in tubular trusses, posts, purlins and rafters including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161 - 1998 grade St - 240

Preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described two coat synthetic enamel paint over a coat of red oxide.

M&L for providing 4mm thick designer fiber glass asphalt self sealing shingles of any colour, design pattern at any height and slope comprising of mineral stabilized reinforced high grade asphalt overlaid with high strength ceramic coated granules on mineral stabilizer fire-retardant coating including sealing ridge/ valley liner cover laid over 18mm thick fiber cement plain sheet fixed with self tapping screws complete all as specified and directed by Engr - in - Charge. (Make : Saint Gobain or Equivalent)

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

M&L 12 mm dia Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n exc 15cm long →

S&F water proof PVC decorative Ceiling board in aluminium snap grid.

S&F Hard Drawn Aluminium sliding window, fitted with 3 track window frame, and shutter with 4mm thick ordinary sheet glass with solar control film and aluminium xpm wire mesh of suitable aperature, 10 mm round bar as guard bars fitted with nuts at both ends and covered with stainless steel pipes, including rubber neoprene, gasket, handle and locking arrangments

M & L 18 mm thick fibre cement building boards fixed or laid/ inserted to MS framework with screws as in panels, fascia, eves board and the like

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polysternon woven fabric (wt. not less than 150 gms/sqm) land over bituminous primer @0.40 ltr/sqm primed surface by forced application complete all as specified

Providing and fixing of wardrobe of size 1.50 x 2.10mtr with sliding shutter, shelf including all fittings and acessories, plywood BWR grade and equivilent with both side 1mm thick laminate in side white laminate and outside as approved.

S&F Modular dressing table made of 18 mm thick BWR grade ply wood with decorative lamination and 2 Nos of drawer with all fittings and 5mm thick mirror complete all as directed.

M&L for 35mm thick flush door panel with edge lipping of 2nd class hard wood beading and CNC cut 0.9mm thick machine pressed decorative lamination matching with existing sides panel including all mongery of stainless steel upto 2.00 sqm complete all as specified and directed

M&L chowkhats covered with CNC cut 0.9mm thick decorative lamination over 18 mm thick BWR grade plywood fixed to brick, concrete, stone or metalic wall and suitable for upto 2.00 Sqm opening complete all as specified

M&L for Providing, PCC 1 : 3 : 6 , type C1, (using 20 mm graded coarse aggregate) cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed

M&L for 20mm granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms in single piece, bullnosing/rounding to edges of stone slab and like in cement mortar (1:4) including pointing in white cement (1 : 2) using marble dust with admixture of pigment to match with shade of granite over 20mm screed in cement (1 : 6).

Excavation in trenches n.exc 1.5m wide n.exc 1.5m deep and getting out in any type of soil complete all as specified and as directed.

M&L for plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed

M&L for precast cement concrete type C1 1:3:6 (20 mm graded aggregate) block masonry with solid blocks, exc.10 cm in width and setting in mortar 1: 6 complete.

M&L for precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar 1 :4, complete all as specified.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4complete all as specified and directed

M&L for providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 225 sq. cm upto 1.00m height, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed.

M&L for providing precast cement concrete type B-0, 1 : 2 : 4 (using 12.5mm graded stone aggregate) louvres and jalies, 25 mm thick set in CM 1 : 4 including all mouldings.

M&L mild steel TMT bars 10 mm dia and over cut to length bent to shape requuired, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

M&L Mild steel TMT bars 5mm dia and over upto 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips.

Use and waste of formwork to sides and soffits of beams, lintels, including supports, overhangs, etc, also slpays between floors and beams, etc. and the like for rough finished surfaces of concrete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removing excavated mateial n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point.

M&L for preparation of newly plastered surfaces and applying two or more coats of 100% Premium Acrylic emulusion paint having VOC 50gm/litre and UV resistance as per IS 15489 : 2004, Alkali and Fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with Silicon Aditives @ 1.43 litre/10sqm over aand including priming coat of exterior primer applied @ 0.90 litre/10 sqm oevr new surfaces.

M&L for granules textured homogeneous wall finishing system including preparation of newly plastered wall surfaces consisiting of a two component system of dry granules (25 Kg per Pack) made of 92% silica particles coated with fade resistant pigment, 100% acrylic polymerbonding agent (5 Kg per pack ) with the applied thickness of the coating being between 0.8mm - 1.2 mm to be applied on curved, smooth level plaster without key, as per manufacturer directions, applied by approved applicator of the manufacturer as per the direction/ supervision of the Engineer -in-Charge, all complete, The above texture coating should confirm to surface spread of flame class one of BS 476 : Part 7 : 1971 and pull off strength of the coating to meet JISA 6909 on smooth plastered surfaces all as specified and as directed by Engr-in-Charge. Make : Bakelite Hylam Limited or equivalent make approved by the GE

S & F Toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes as required

Supply and fix LED Bollard light fitting 10/11 W Bollard made of extruded aluminium housing to redefine landscapes with better light quality and with soft 360 deg light distribution. Rated IP65. fixed on suiatable size PCC foundation including make good of surface and with Suitable connector shall be provided for LED connection between driver output and LED all as specifed and directed. Make: Crompton (LBLSN-10-CDL)/ Wipro (LB14-131-XXX-65-05) / Philips(BCP150 LED150/WW PSU 220-240V 7043)

Supply and fix LED spot light 10 W , 6500K, Efficacy 80lm/w,220-240V/50-60Hz, 800lm, made in die cast aluminim housing with decorative clear opal acrylic diffuserwith IP 65 protection including supporting stand Make: Philps (BVP131 CW ) / Wipro (LF05-600-036-27-XX)

S&F LED recessed 2'x2' luminaire fitting 30/36 Watt glare free soft illumination with white powder coated CRCA housing with LEDs energy saving Make: Crompton (LCTLRN-36-FO-CDL)Wipro (CRCO10R030TL57UGSN)/ Philips (Smart glow)

Harsh Infrastructure

JAY BHARAT METAL SUPPLIERS

K K Construction Co

V D JADEJA

Nitesh Enterprise

roxy enterprise

Bharat Enterprise

M/s SK Traders

shree chamunda enterprise