Construction of Two (02) New Govt. Bungalows at Ekta Nagar, Dist. Narmada

Name of Work : Estimate For Residential Quarters at Ekta Nagar

Sr No Description QTY Unit Total Rate Amount

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

loose or soft soli

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead.(B) Dense or Hard soil

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead.(C) Hard Murrum

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials

4 and disposing off the excavated stuff upto 50 Meter 21.18 Cum 309.04

lead. (D) Soft rock not requiring Blasting.

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead.(E) Hard Rock

Excavation for pipe line trenches for water supply,

sewerage line, manhole etc. all with shoring and

struting if required as per required gradient and line

including safety provisions using site rails and stacking

excavated stuff including up to all required lead

cleaning the site etc. complete for all lifts and strata as

a) In all sorts of soil and soft murrum

Excavation for pipe line trenches for water supply,

sewerage line, manhole etc. all with shoring and

struting if required as per required gradient and line

including safety provisions using site rails and stacking

excavated stuff including up to all required lead

cleaning the site etc. complete for all lifts and strata as

b) In hard murrum, boulders incl. macadam road.

Providing and laying cement concrete 1:2:4 (1-Cement

: 2- Coarse sand : 4- graded stone aggregates 20 mm

8 nominal size) and curing complete including cost of 95.60 Cum 3666.46

formwork in (A) Foundation and Plinth.

Provinding and Laying controlled cement concrete M-

250 including finising smooth with curing complete

9 including the cost of form work but excluding the cost of 79.12 Cum 4261.20

reinforcement for reinforced concrete work in

foundations, footings, base of columns and mass

Provinding and Laying controlled cement concrete M-

250 including finising smooth with curing complete

10 including the cost of form work but excluding the cost of 8.60 Cum 8197.48

reinforcement for reinforced concrete work in columns

Provinding and Laying controlled cement concrete M-

250 including finising smooth with curing complete

including the cost of form work but excluding the cost of

11.1 reinforcement for reinforced concrete work in columns 18.38 Cum 8167.80

having any cross sectional area.

i) Upto Floor Two Level

Sr No Description QTY Unit Total Rate Amount

Provinding and Laying controlled cement concrete M-

250 including finising smooth with curing complete

including the cost of form work but excluding the cost of

11.2 reinforcement for reinforced concrete work in columns 15.62 Cum 8207.25

having any cross sectional area.

ii) First Floor

Provinding and Laying controlled cement concrete M-

250 including finising smooth with curing complete

including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in columns

having any cross sectional area.

iii)Terrace Floor

Providing and laying cement concrete 1:3:6 (1- Cement

: 3- Coarse sand : 6- crushed stone aggregates 20 mm

nominal size) and curing complete including cost of

formwork in (A) Wall Caps / Coping

i) Terrace Floor

Providing and laying cement concrete 1:3:6 (1- Cement

: 3- Coarse sand : 6- crushed stone aggregates 20 mm

nominal size) and curing complete including cost of

formwork in (A) Wall Caps / Coping

ii) Stair cabin Floor

Provinding and Laying controlled cement concrete M-

250 including finising smooth with curing complete

13 including the cost of form work but excluding the cost of 38.48 Cum 6287.11

reinforcement for reinforced concrete work in Plinth

Beam having any cross sectional area.

Provinding and Laying controlled cement concrete M-

250 including finising smooth with curing complete

including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Beam

having any cross sectional area.

i) Upto Floor Two Level

Provinding and Laying controlled cement concrete M-

250 including finising smooth with curing complete

including the cost of form work but excluding the cost of

14.2 reinforcement for reinforced concrete work in Beam 37.70 Cum 9598.22

having any cross sectional area

ii) First Floor

Provinding and Laying controlled cement concrete M-

250 including finising smooth with curing complete

including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Beam

having any cross sectional area.

iii) Terrace Floor

Providing and laying controlled cement concrete M.250

and curing complete excluding the cost of formwork

and reinforcement for reinforced concrete work in Grid

Providing and laying controlled cement concrete M-250

and curing complete including the cost of formwork and

16.1 excluding the cost of reinforcement for reinforced 78.92 Cum 7011.93

concrete work in slabs.

i) Upto Floor Two Level

Providing and laying controlled cement concrete M-250

and curing complete including the cost of formwork and

16.2 excluding the cost of reinforcement for reinforced 56.62 Cum 7051.38

concrete work in slabs.

ii) First Floor

Sr No Description QTY Unit Total Rate Amount

Providing and laying controlled cement concrete M-250

and curing complete including the cost of formwork and

16.3 excluding the cost of reinforcement for reinforced 7.80 Cum 7090.83

concrete work in slabs.

iii) Terrace Floor

Providing and laying controlled cement concrete M-200

and curing complete including the cost of form work but

17.1 excluding the cost of reinforcement for reinforced 13.58 Cum 7430.57

concrete work For Lintels and sill.

i) Ground Floor Lintel & sill

Providing and laying controlled cement concrete M-200

and curing complete including the cost of form work but

17.2 excluding the cost of reinforcement for reinforced 9.44 Cum 7470.02

concrete work For Lintels and sill.

ii) First Floor

Providing and laying controlled cement concrete M-200

and curing complete including the cost of form work but

17.3 excluding the cost of reinforcement for reinforced 1.04 Cum 7509.47

concrete work For Lintels and sill.

iii) Terrace Floor

Providing and laying controlled cement concrete M-200

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in STAIR CASES for All floor.

i) Upto Floor Two Level

Providing and laying controlled cement concrete M-200

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in STAIR CASES for All floor.

Providing and laying controlled cement concrete M-200

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work For Chajja in All Floors

i) For Ground Floor

Providing and laying controlled cement concrete M-200

and curing complete including the cost of form work but

19.2 excluding the cost of reinforcement for reinforced 1.76 Cum 4891.85

concrete work For Chajja in All Floors

ii) First Floor

Providing and laying controlled cement concrete M-200

and curing complete including the cost of form work but

19.3 excluding the cost of reinforcement for reinforced 0.18 Cum 4931.30

concrete work For Chajja in All Floors.

iii)Terrace Floor

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

20 exceeding 20 cm. in depth consolidating each 321.36 Cum 137.47

deposited layer by ramming and watering.

Filling in foundation and plinth with murrum or selected

soil in layers of 20cm. Thickness including watering,

ramming and consolidating etc. complete. (upto 10 ton)

Refilling the pipeline trenches incl. ramming, watering,

22 consolidating desposal of surplus stuff as directed 276.00 Cum 22.00

within a radius of 3 km

Sr No Description QTY Unit Total Rate Amount

Providing bedding incl. ramming, watering, levelling,

consolidating etc. Complete as per standard and

23 instruction of engineer incharge 3. As above with 24.00 Cum 329.00

required quality Sand brought from outside inclduing all

Providing TMT Bar FE 500D reinforcement for R.C.C.

work including bending, binding and placing in position

complete upto floor two level.

i)Upto Floor Two Level

Providing TMT Bar FE 500D reinforcement for R.C.C.

work including bending, binding and placing in position

complete upto floor two level.

ii) First Floor

Providing TMT Bar FE 500D reinforcement for R.C.C.

work including bending, binding and placing in position

complete upto floor two level.

iii)Terrace Floor

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

25 foundation and plinth in Cement Mortar 1:6 (1- 6.16 Cum 4279.98

Cement : 6 -fine sand) (B) Conventional

Masonary work using Aerated light weight concrete

block having crushing strength not less than

kg/sqcm for super structure above plinth level upto all

floor level with required chemicle used for the bonding

complete as per Technical Specification.

Half brick masonry in common brunt clay building

bricks having crushing strength not less than

27.1 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - 84.74 Sqm 696.50

coarse sand) in Superstructure (B) Conventional.

i) Ground Floor

Half brick masonry in common brunt clay building

bricks having crushing strength not less than

27.2 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - 42.32 Sqm 702.90

coarse sand) in Superstructure (B) Conventional.

ii) First Floor

Providing 15mm thick cement plaster in single coat on

Rough (Similar) side of single or half brick walls for

interior plastering and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement :4-sand), including fixing

28.1 Chicken wire mesh 24x16 at every RCC and Brickwork 1337.72 Sqm 363.58

joints, groves including labour and material etc.

complete as directed by engineer in-charge.

i)Upto Floor Two Level

Providing 15mm thick cement plaster in single coat on

Rough (Similar) side of single or half brick walls for

interior plastering and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement :4-sand), including fixing

28.2 Chicken wire mesh 24x16 at every RCC and Brickwork 1186.04 Sqm 388.04

joints, groves including labour and material etc.

complete as directed by engineer in-charge.

ii) First floor

Sr No Description QTY Unit Total Rate Amount

Providing 15mm thick cement plaster in single coat on

Rough (Similar) side of single or half brick walls for

interior plastering and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement :4-sand), including fixing

28.3 Chicken wire mesh 24x16 at every RCC and Brickwork 81.62 Sqm 412.50

joints, groves including labour and material etc.

complete as directed by engineer in-charge.

iii) Terrace Floor

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering on ceilings

and sofits of stairs upto floor two level, and finished

even and smooth in (ii) Cement mortar 1:4 (1-cement :

i) Upto Floor Two Level

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering on ceilings

and sofits of stairs upto floor two level, and finished

even and smooth in (ii) Cement mortar 1:4 (1-cement :

ii) First Floor

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering on ceilings

and sofits of stairs upto floor two level, and finished

even and smooth in (ii) Cement mortar 1:4 (1-cement :

iii) Terrace Floor

20mm thick sand faced cement plaster on walls upto all

height above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm

thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

complete, including fixing chicken mess wire of 24x16

at every RCC and Brickwork joints including labour and

material etc. complete as directed by engineer in-

Applying two coats of Birla or Asian acrylic lapy ( putty)

& two coats of primer of approved brand and

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand

papered smooth.

Applying two coats of primer of approved brand and

manufacture on new wall surface to give an even shade

32 including thoroughly brushing the surface free from 1436.82 Sqm 20.30

mortar dropping and other foreign matter and sand

papered smooth.

Wall painting (three coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including thoroughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

Wall painting (three coats) with plastic emulsion paint of

approved brand and manufacture on undecorated

ceilings and sloping roofs surface to give an even

shade including thoroughly brushing the surface free

from mortar droppings and other foreign matter and

sand papered smooth.

Sr No Description QTY Unit Total Rate Amount

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials. etc complete.

Providing and laying first quality double-charged

vitrified floor tiles 1200 mm × 600 mm, 10–12 mm thick,

of approved make/shade, laid on 20 mm thick CM 1:4

bed, joints filled with white cement and matching

36 pigment, including cutting, curing, polishing, and all 650.74 Sqm 847.39

transportation, loading, unloading, and handling,

complete as directed by Engineer-in-

Charge.(AGL,Somany, Vermora, Johnson)

Providing and laying polished Kota stone slab flooring

over 20mm (Average) thick base of cement mortar 1:6

(1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

:1.5 - coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match the shade

of slab including rubbing and on site polishing etc.

complete. (A) 25mm thick

Providing and laying Ceramic tiles in flooring treads of

steps and landing laid on a bed of 12mm thick cement

mortar 1:3 (1-cement : 3-coarse sand) finishing with

flush pointing in white cement with pigment added to

match tile of any colour and any shade (Make : Kajaria,

Varmora, Nitco)

Providing and laying colour glazed tiles in skirting

risers of steps and dado on 10mm thick cement plaster

1:3 (1-cement : 3- coarse sand) and jointed with white

cement with pigment added to match tile of any colour

and any shade (Make : Kajaria, Varmora, Nitco)

Providing and fixing 38mm thick water proof flush door

solid core double shutter on 18mm thk granite stone

frame with 1mm thick laminated sheet on both side of

the shutter having teakwood lipping edge patti of

mm x 25.4 mm on all edges with Melamine Polish

matching shade of laminate with Magnetic catcher triple

strip vertical type(1 No),S.S. 304 tower bolt (barrel type)

300x10 mm (1 No) (Make : Define, Kich : TBF312S),

Main door set 19mm dia mortise handle MAKE:

DEFINE: Mortise handle (DF ESRH 01),(kich:Morties

Handle-PRLH 193S) & 60mm X 85mm lock body with

strike plate (DEFINE - Lock Body: DF-ML 100) (Kich :

Lock body: PRMLB 9S), thumb turn cylinders 70mm

(Kich : thumb turn cylinder: PRPCKN S70, Define : DF-

OSK-70) and SS matt Hinges of 100mm X 65mm X

3.2mm (Make : Kich Item No.PRBHT2B34 and Define

Make - Item No. DF-BBH-04) with necessary SS

fixtures and fastenings etc. complete all SS fittings to

be of SS304 matt finish as directed by Engineer-in-

Sr No Description QTY Unit Total Rate Amount

Providing and fixing 38mm thick water proof flush door

solid core single shutter with 1mm thick laminated

sheet on both side of the shutter with teak wood frame

of size 100mm X 65mm for door frame, Godrej Locking

Solutions and Systems Classic Keyless Cylindrical

Lock 5805 (Make : Godrej, Yale, Europa), SS matt

41 Hinges of 100mm X 65mm X 3.2mm of Make : Kich 20.26 Sqm 3875.64

Item No.PRBHT2B34 and Define Make - Item No. DF-

BBH-04 and baby latch of Make : Kich - Item Code :

ABLRC14S, DEFINE. Rates including with necessary

fixtures and fastenings etc. complete as directed by

Engineer-in-charge.

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm (of Jindal Section no:2459 @ wt.of

0.738 Kg/mt), horizontal Three track member size

92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size

92mm x 31.75mm x 1.50mm (of Jindal Section

no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm (of

Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical

42 member of size 40mm x 18mm x 1.29 mm (of Jindal 91.50 Sqm 2014.95

Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick

transparent bronze colour tinted one way float glass

with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc with providing & fixing Mosquito mesh

shutter using Alluminium section of size 40mm x 18mm

x1.29mm (of Jindal Section no:8947@ wt.of

Kg/mt) for frame and stainless steel jali.

Providing and fixing standared extruded of alluminium

section of size 63mm x 38.10mm x 1.2mm (Jindal

Section : 2434, @ Wt. 0.643kg per mt) with colour

anodized alluminium frame for ventilation with 5 mm

thick frosted glass luverds as details etc complete for

Ventilation with providing & fixing Mosquito mesh

shutter using Alluminium section of size 40mm x 18mm

x1.29mm (of Jindal Section no:8947@ wt.of

Kg/mt) for frame and stainless steel jali.

Providing and fixing 18 mm thick granite stone mirror

polished (premoulded and prepolished) machine cut for

dado, vanity counters, window sills, facias, steps and

similar locations of required size of approved shade,

colour and texture laid over 20 mm thick base cement

44 mortar 1:4 (1 cement : 4 coarse sand ) with joints 66.92 Sqm 2970.41

treated with white cement, mixed with matching

pigment, epoxy touch ups, including rubbing, curing

moulding and polishing to edge to give gloss finish etc.

complete at all levels

Sr No Description QTY Unit Total Rate Amount

38 mm thick wood block flooring of first class teak wood

laid over 25 mm thick leveling layer of cement concrete

1:2:4 (1 cement: 2 coarse sand: 4 graded stone

aggregate 10 mm nominal size) to be paid separately.

coated with a thir layer of hot bitumen penetration 80/25

(blown type) @2.45 kg per sqm, including fixing blocks

in position after dipping in hot bitumen (blown type) up

to half depth, planed, levelled smooth and finished

Toughned Glass Door:- Providing and fixing 12mm

46 thick toughned glass pivot door with all necessary 12.00 Sqm 19187.98

hardware, floor spring etc complete.

Providing and fixing polished black granite stone 16mm

to 18mm thick in windows and doors jambs & sills with

moulding with edge and polishing of the stone, fixing

with cement mortar and filling the joints with necessary

materials like araldite etc. complete as directed.

Extra for providing opening of required size & shape for

wash basin/ kitchen sink in kitchen platform, vanity

counter and similar location in marble/ Granite/ stone

work, including necessary holes for pillar taps etc.

including moulding, rubbing and polishing of cut edges

Providing edge moulding upto 25 mm thick Kota stone

for Staircase including machine polishing to edge to

give high gloss finish etc. complete as per design

approved by Engineer-in-Charge.

Providing 10mm Wide X 2.00mm deep anti sleep

50 groove in 25mm thick kota stone for treads in line, level 33.96 Meter 158.92

& edges all etc. complete.

Extra for pre finished nosing in treads of steps of Kota

stone/ sand stone slab.

Providing and fixing M.S. plain grills of required pattern

to M.S. flats of windows etc. with M.S. flats at required

spacing and frame round, square or round bar, with

round headed bolts and nuts or by screws plain grill

with one coat of red lead paint & two coats on new steel

and other metal surface with enamel paint, brushing,

interior to give an even shade including cleaning the

surface an even shade including cleaning the surface of

all dirt, dust and other foreign matter.

Steel work, welded in built up sections framed work

including cutting, hoisting, fixing in position and

applying a priming coat of read lead paint. (A)In beams

and joists, channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams. Hip

and jack rafters, purlins conneted to common rafters

and the like, with two coats of paint on new steel and

other metal surface with enamel paint, brushing, interior

to give an even shade including cleaning the surface an

even shade including cleaning the surface of all dirt,

dust and other foreign matter.

Sr No Description QTY Unit Total Rate Amount

Providing and fixing 16G ASIS 304 Grade stainless

steel railing comprising 50mm dia railing fixed on 32 X

32 mm SS Square pipe of 900mm height, Square pipe

placed at maximum 1200mm C/C distance along with

three SS horizontal members of 16mm dia connected

at the side of baluster with SS brackets. The balustrade

shall be mounted on floor with base plate using

specially designed anchor fasteners and concealed by

16G ASIS 304 Grade SS base cover cap (Wall

thickness of pipes shall be taken as 1.50mm along with

all visible component developed in high grade SS and

wherever required, joints to be filled with bushings for

extra strength)

Providing and laying SYNROOF HI-BUILD or

equivalent, 2 mm thick elastomeric, premium quality

acrylic coating waterproofing membrane finished which

consist of Bitumen primer and 80 GSM membrane with

55 ultra violet resistance and working up to any height with 64.36 Sqm 1074.53

the 5 years of guarranty against any leakage etc.

complete as per detail specification and as directed by

Engineer-In-Charge.

Providing and laying cement concrete flooring 1:2:4 (1-

cement : 2-coarse sand : 4-graded stone aggregate

20mm nominal size) laid in one layer, 40 mm thick and

finished with a floating coat of neat cement including

mixing water proofing materials in cement mortar in

proportion recommended by the manufacturer as

approved and directed by engineer in-charge.

Providing and laying integrated cement based water

proofing treatment of required thickness over the roof

including 10mm thick waterproofing cement plaster in

cement plaster in cement mortar1:3 and chaina mosaic

fitting and finally finishing the surface with white cement

slurry and slopping out terrace slabs with following

specification laid to required slope not flatter than 1:80

(the thickness of water proofing treatment near

rainwater outlet or the lowest point of the finished slope

shall not be less than 45mm, including treating the

vertical surface of the parapet wall up to 20cms. height

above finished level of terracing including finishing the

top with joint less water proofing plaster, curing, testing

etc. complete. Rate is including ten years performance

of guarantee bond to be given on stamp paper. (No

extra shall be paid for increase in thickness for proper

(A) Applying and grouting a slurry coat of neat

cement using 2.75 kg/sqm. of cement admixed with

properly water proofing compound conforming to IS -

2645 and 10 mm thick water proofing cement plaster in

Cement mortar 1:3 over the R.C.C. slab incl. cleaning

57 the surface before treatment 627.50 Sqm

(B) Laying cement concrete using broken brick bats

75mm size with 50% of cement mortar 1:4 (1cement:4

coarse sand) over 10mm thick water proofing cement

plaster in cement mortar 1:3 (1 cement, 3 coarse sand)

admixed with proprietary water proofing compound

conforming to IS 2645 to required slope and treating

similarly the adjoining walls up to 200mm height incl.

rounding of junction of walls.

Sr No Description QTY Unit Total Rate Amount

(C) After Two Days of proper curing applying a second

floor of cement slurry

(D) Finishing the surface with china mosaic pieces laid

on 10mm thick joint less cement plaster of mix 1:3(1

cement :3 coarse sand )admixed with proprietary water

proofing compound conforming to IS :2645 and finally

finishing the surface with trowel with neat cement slurry

(E) The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing for

All above operation to be done in order and as

directed and specified by the Engineer In Charge.

Filling in foundation and Plinth with brick bats chhara in

layers of 20 cm thickness including watering, ramming,

and consolidation etc completed

Filling in sunken portion with broken AAC Block

59 including watering, ramming, and consolidation etc 8.86 Cum 4819.72

completed as per engineer-in-charge.

Providing cement vata (10cm. x 10 cm. size) quarter

60 round in cement mortar 1:1 including neat cement 100.92 Rmt 24.28

finishing, watering etc. complete.

Providing and fixing acrylic Name plate of required size

on Room with lettering etc. complete as per instruction

of engineer in charge including all labour and material

Applying general insecticide pest control treatment to

floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS

62 part -II( (0.075% concentration by mass) is 634.16 Sqm 43.97

recommended 10.5ml chemical diluted with 5 liters of

water application 0.5 litre chemical /Sqm of surface is

recommended as per I.S.

Constructing Sandwitch Platform of 18 mm thick

Polished Black Granite at top and 30 mm thick Kota

stone slab flooring fitting at bottom with cementing

Materials / adhsives including macking necessary

grooves in walls with Vertical Kotastone 30 mm x 2 No

63 sandwitch thick every 60 cm centre to cenre including 9.58 Sqm 3706.43

all labour material of approved quality incl. full moulded

round front edge fixed in wall for partition and jointed

with grey cement slurry including rubbing and polishing

Providing and fixing SS Kitchen Sink Glosy ASIS

Grade x 1mm thick with over all size 610x460 mm &

bowl size 560x410x200 mm with C.I. or M.S. brackets,

painted white including cutting holes in walls and

making good the same and including fittings, Including

64 providing and fixing C.P. brass waste for washbasin or 2.00 No. 5247.44

sink. (A) 32mmdia, chromium plated bottle trap with

necessary couplings of approved quality for Kitchen

and M.I. fisher union, 15 mm dia stop cock for

washbasin or sink. (A) 32mm dia.

Sr No Description QTY Unit Total Rate Amount

Providing laying and jointing in true line and level 50mm

dia. U.P.V.C. Pipe (SCH- 80) for cold water including

fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 50mm

dia. U.P.V.C. Pipe (SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 32mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm

dia. U.P.V.C. Pipe (SCH- 40) for cold water including

fittings make PRINCE / UPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials

Providing laying and jointing in true line and level 15mm

dia. U.P.V.C. Pipe (SCH- 40) for cold water including

fittings make PRINCE / UPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials

Sr No Description QTY Unit Total Rate Amount

Providing and fixing wash down water closet wall hung

(European type, W.C. Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement

Mortar 1:1 (1-Cement : 1-fine sand) (A) vitreous China

Pattern :(i) in white colour, including plastic seat and

cover for wash down water closer with C.P. brass

hinges and rubber buffers, Providing and fixing G.I.

inlet connection for flush pipe with W.C. Pan, Providing

and fixing 32mm dual flow metropole valve including

concealed body with exposed shutoff provision and

round flange of approved quality including fixing in pipe

line etc. complete and providing and fixing Health

Faucet Heavy duty having pipe length of 1 rmt with

hook with fitting etc. complete as directed by engineer

in-charge. (Cera, Hindware, Plumber make)

Providing and fixing table top Wash Basin single hole

for piller tap and making good the same but including

fitting (A) Vitreous chaina : (II) Flat back wash basin

550mm x 400mm size in white colour including

provinding and fixing C.P. brass waste coupling of

71 32mm dia., chromium plated bottle trap with necessary 10.00 Each 2443.06

couplings of approved quality, M. I. fisher union of

32mm dia., C.P brass pillar tap of 15mm dia., PVC

connection pipe from stop cock to pillar tap etc.

complete. (Cera, Vermora, Johnson make)

Providing and fixing CP Brass 32mm size Bottle Trap of

approved quality & make and as per the direction of

Engineer-in-charge. Make : Cera, Johnson, Vermora

Providing and fixing screw down bib taps of following

73 size.(B) Brass chromium plated screws down Bib Tap. 64.00 Each 186.83

Providing and fixing Two way bib cock for toilet blocks

74 cock 15 mm Ø Heavy duty with cap etc. complete. 10.00 Each 815.49

Providing and fixing C.P. Single Flow Shower Rose of

70mm Dia. having 100mm shower Arm with 15 to

75 20mm Dia. Connected With Hot and Cold 2 in 1 Wall 10.00 Each 7647.78

Mixer with bend pipe. Make :Johnson, Varmora OR

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

Providing and fixing S.W. gully trap with C.I. grating

brick masonry chamber and water tight C.I. cover with

77 frame of 300mm x 300mm size (inside) with standard 8.00 Each 1246.92

weight.(i) Square mouth traps.(B) 150mm x 100mm

size P or R type

Providing and fixing C.P. brass towel rail complete with

C.P. brass brackets fixed to wooden plugs with C.P.

brass screws (B) 600mm x 20mm size. (Cera,

Hindware, Johnson make)

Providing and fixing SS towel ring complete with fittings

having 200 mm diameter etc complete as directed by

engineer in-charge. (Cera, Jaguar, Johnson make)

Sr No Description QTY Unit Total Rate Amount

Providing and fixing SS towel rod complete with fittings

having 600 mm length etc complete as directed by

engineer in-charge. (Cera, Jaguar, Johnson Make)

Providing and fixing 600mm x 450mm bevelled edge

glass mirror of superior glass mounted on 6mm thick

81 A.C. sheet or plywood sheet & fixed to wooden plugs 12.00 Each 859.41

with C.P. brass screws and washers.

Providing, supplying & Installing 1.50 m long, 5 Pipe

cloth hanging system with pulley to adjust height of the

kit as required by the user. (Esy Dry make)

Providing and fixing Aprooved Quality SS 8 raw hook

etc completed as per EIC.

Providing and fixing Both side double S.S Soapdisc

84 fixing on wall with wall plug etc. completed. 24.00 Each 411.17

Providing & Fixing 25mm Concealed Stop Cock body

plus exposed part etc. all complete as per engineer-in-

charge. Make : Cera, Johnson, Vermora.

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-

1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of the

size 75 mm diametre x 149 mm length x 145 mm heigh

at every 2000 mm center to center or shall be

concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-

1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of the

size 100 mm diametre x 149 mm length x 145 mm

heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

15mm dia. nominal bore tube fitting and clamps

including making good the wall, ceiling and floor etc.

Providing and fixing PVC SWR Vent Cowl 75 mm dia

as directed by engineer in charge

Providing and fixing PVC SWR Vent Cowl 110 mm dia

as directed by engineer in charge

Sr No Description QTY Unit Total Rate Amount

Constructing brick masonry chamber for underground

C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg./Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm

internal dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-cement

:2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(ii) Inside dimensions 500mm x 700 mm and

450mm deep for pipe line with one or two inlets.

(more than 10 ton)

Providing, erecting and fixing double coated Syntex or

equivalent PVC (ISI) mark water tank of required

capacity each with all necessary fittings & connection

etc. complete on terrace.

Providing and fixing ball valve in water tank heavy type

93 50mm dia. including fitting, testing etc. complete. 2.00 Each 189.84

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low density, complete with

special flange compression type fittings, wall clips etc.

including making good the wall ceiling and floor.(G)110

Providing and fixing Gun metal check or nonreturn full

way wheel valve.(E) 40mm dia.

Providing and fixing Gun metal check or nonreturn full

way wheel valve.(D) 32mm dia.

Providing, supplying, lowering, laying, jointing in

standard length ISI mark high density Polyethylene

H.D.P.E. Pipes (By butt fusion welding method) with

HDPE specials Tees, elbow, cross, coupler, tail piece,

sadler suitable for potable water as per IS specification

no. 4984/1995 including all local and central taxes,

transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the dept.

stores, including cost of labour, material, giving

satisfactory hydraulic testing etc. comp. HDPE-

i) 75 MM dia pipe

Providing, supplying, lowering, laying, jointing in

standard length ISI mark high density Polyethylene

H.D.P.E. Pipes (By butt fusion welding method) with

HDPE specials Tees, elbow, cross, coupler, tail piece,

sadler suitable for potable water as per IS specification

no. 4984/1995 including all local and central taxes,

transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the dept.

stores, including cost of labour, material, giving

satisfactory hydraulic testing etc. comp. HDPE-

i) 50 MM dia pipe

Sr No Description QTY Unit Total Rate Amount

Providing, supplying, lowering, laying, jointing ISI mark

CI D/F Sluice Valves as per IS:14846 (Latest Edition) of

following class and diameter including all taxes,

insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to

99 departmental stores, stacking, including cost of all 2.00 Nos. 2521.00

labour, jointing material, including nut bolts and giving

satisfactory hydraulic testing etc. complete. 13.1.H PN-

1.6 With hand/wheel cap operated (Alt-1 type long

body) 50 mm dia

Providing, supplying, lowering, laying, jointing ISI mark

CI D/F Sluice Valves as per IS:14846 (Latest Edition) of

following class and diameter including all taxes,

insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to

100 departmental stores, stacking, including cost of all 2.00 Nos. 3346.00

labour, jointing material, including nut bolts and giving

satisfactory hydraulic testing etc. complete. 13.1.H PN-

1.6 With hand/wheel cap operated (Alt-1 type long

body) 75 mm dia

Providing, supplying, lowering, laying and jointing in

position following C. I. Air valves of approved make &

quality of following class and diameter including all

taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to

departmental stores, stacking, including cost of all

labour, jointing material, including nut bolts and giving

satisfactory hydraulic testing etc. complete. (C) Air

valves double acting (DS2) 40 MM dia

Construction of valves chambers in brick or bela stone

masonry, locally available in C. M. 1:6. Foundation

concrete 150 mm thick in C. C. 1:4:8 of trap metal size

25 mm to 40 mm thick, inside cement plaster in C. M.

1:3 and cement pointing outside in C. M. 1:3 and top

cover of precast RCC slab 150 mm thick (with key hole

in two parts, each with handles or MS Bar etc. complete

as given size) Upto 1 Mt. depth from G. L. to pipe invert

level incl. complete civil works but excl. cost of

excavation and refilling, with cast in situ RCC slab in

one single piece with fixing of CIMH Frame and cover

(excl. cost of CI-MH Frame and cover) with 23 mm

thick brick masonry wall in C.M.1:6 (A) Size of 1.30 m x

1.30 m and 1.2 m deep, (1) With precast slab in two

Sr No Description QTY Unit Total Rate Amount

Providing and fixing wall panelling in the living room

double height area using 19 mm thick waterproof

plywood with necessary framework, supports, and

fixing arrangements, executed strictly as per architect’s

drawings, reference 3D views, and instructions of the

Architect/Engineer-in-Charge. The work shall include all

types of finishing as specified by the Architect, including

all varieties of laminate and veneer as per requirement,

along with polish, paint, or any other approved finish,

with proper surface preparation, edge finishing,

103 detailing, and complete workmanship to achieve the 23.54 Sqm 12709.57

required design intent. Measurement shall be taken in

square metres (sqm) of the actual finished surface area

of panelling, with openings exceeding 0.5 sqm

deducted. The quoted rate shall be inclusive of all

finishes, framework, fixing arrangements, wastage,

cutting, joints, adhesives, screws/nails,

polishing/painting materials, labour, tools, and all

incidental works necessary for the proper completion of

Providing and fixing a custom-designed TV unit as per

detailed drawings, reference 3Ds, and instructions of

the Architect/Engineer-in-Charge, including all drawers,

side wardrobes, shelves, and provision for set-top box

placement beneath the TV portion. The entire unit shall

be fabricated using 19–20 mm thick waterproof IS:701

grade plywood with necessary framework, supports,

and high-quality hardware fittings. The work shall

include all types of veneer and laminate finishes, as

well as polish or paint wherever specified by the

Architect, with proper surface preparation, edge

finishing, and detailing to achieve the required design

intent. Measurement shall be taken in square metres

(sqm) of the actual finished surface area, with the

quoted rate deemed to include all materials, fittings,

accessories, adhesives, screws/nails,

polishing/painting, labour, tools, and all incidental works

required for the proper completion of the item.

Providing and fabricating a custom-designed 7-seater

sofa unit on two sides of the living room as per the

detailed drawings, reference 3Ds, and instructions of

the Architect/Engineer-in-Charge, ensuring proportions,

design, and detailing exactly as specified. The sofa

shall be constructed with a strong internal framework

using approved quality materials, fitted with high-quality

firm cushioning/high-density foam, and finished with

luxurious upholstery options such as premium leather

for excellent durability, velvet for a plush tactile

experience, or tight-weave fabric (e.g., polyester blend)

for a resilient, durable, and easy-care finish, as per the

requirement and approval of the Architect. The work

shall include all types of finishing items and

accessories necessary to complete the sofa in

accordance with the architect’s design intent. The

quoted rate shall be inclusive of all materials,

cushioning, fabric/leather/velvet finishes, framework,

adhesives, labour, tools, and all incidental works

required for the proper completion of the item.

Sr No Description QTY Unit Total Rate Amount

Providing and fabricating a center table for the living

room as per the detailed drawings, reference 3Ds, and

instructions of the Architect/Engineer-in-Charge. The

table shall be constructed with a teak wood base and

appropriate plywood components as specified in the

drawings, ensuring strength, stability, and design

accuracy. The work shall include all types of finishing

materials as required, including polish, veneer,

laminate, or any other approved finish, with proper

surface preparation, edge finishing, and detailing to

achieve the desired aesthetic and functional quality.

The quoted rate shall be inclusive of all materials,

finishes, adhesives, hardware, labour, tools, and all

incidental works required for the proper completion of

Providing and installing full-height pelmet curtains as

per the detailed drawings, reference 3Ds, and

instructions of the Architect/Engineer-in-Charge. The

pelmet shall be constructed using high-quality wood or

MDF, fabricated and finished to match the design

intent. Curtains shall be made from premium-quality

fabric with the best finish, selected as per the

Architect’s specifications, ensuring durability, smooth

drape, and an elegant appearance. The work shall

107 include all types of finishing materials and workmanship 35.70 Sqm 5295.65

as required, including framework, surface finishing,

polishing, veneers, laminates, hardware, accessories,

and fixing arrangements necessary for proper

functioning and a refined, complete look. The quoted

rate shall be inclusive of all materials, fabrics,

framework, adhesives, labour, tools, and all incidental

works required for the complete and proper installation

of the pelmet and curtains.

Sr No Description QTY Unit Total Rate Amount

Supplying and Placing in Position of Isabella Natural

Stone & Veneer 6 Seater Dining Set with Storage size :-

(W)1800mm X (D)1100mm X (H)755mm. Table Top

Thickness 36mm. Dimension Of Chair (W)500mm X

(D)520mm X (H)905mm. Seating Capacity 6 Seater.

Seating Height 465mm. A stunning interplay of mixed

materials, our Isabella Collection brings a modern

element to your dining space. The Bianco Polished

natural stone tabletop with quarter-round top edges

offers an exquisite look. Enriched with distinctive veins

and a subtle sheen of quartzite, the allure of natural

stone adds dimension to the table. The exotic designer

veneer pedestal base with gold-toned metal accents

adds a striking contrast, while the spacious cabinets

keep your dining essentials within reach. Paired with

barrel back chairs wrapped in sumptuous leatherette,

Isabella perfectly blends form and functionality into your

space. Includes: Dining table and eight dining chairs.

The rectangular tabletop boasts soft curves on two

sides, and the half-bullnose edges complete the

delicate look of the table. Alluring natural veins and the

subtle sheen of Quartzite make every piece unique.

The table base features exotic designer Smoke Oak

Veneer over premium engineered wood. The table

base features cabinet storage with ample space for

dining essentials. Gold-toned metal accents add a

statement appeal. Chairs feature barrel-curved back for

an enveloping comfort. Premium leatherette upholstery

in dual-tone feels soft and sumptuous. Decorative stitch

details on the chair back make it a statement piece.

Soft seating offers a comfortable seating experience.

An intensive 6-step polish process lends a velvety

matte finish.supplying

Providing, Premium &PUfixing

with low chemical

basket with 18-

19mm thick BWP ply with 18mm thick full depth

plywood support and 1mm thick laminated drawer facia

and support plywood including 18" depth stainless steel

storage baskets(Unit-1 having - Cutlary (430 x 500 x

100mm), plain wire (430 x 500 x 100mm) and Dish

109 basket (430 x 500 x 200mm), Unit-2 Having - Savsar 2.00 Set 19128.39

(430 x 500 x 100mm), plain wire (430 x 500 x 100mm),

Plain wire (430 x 500 x 200mm), Telescopic Channel

18" Zinc (35kg), 10cm Size SS handle on each drawer

and screw-nut-bolt and adhesive material etc. complete

as approved by the Engineer in charges.

CUPBOARD WITH HALF GLASS SHUTTER IN

Providing and fixing wall mounted Cupboard which is

made from 18mm thick BWP Grade plywood with out

side 1mm thick Premium finish Laminate and inside

with 1mm thick white backing lamiate sheet, Cupboard

with two nos of glass shutters which is sliding on

standard teleschopic channels, Cupboard with 3 nos. of

shelves with SS finish handels. All the plywood borders

are finish with teak wood battens and malamine polish

complete as directed by engineer in charge.

Sr No Description QTY Unit Total Rate Amount

The under-washbasin shutter shall be executed by

providing, cutting, assembling, and fixing 18–19 mm

thick BWP plywood as shutter fascia with 18 mm thick

full-depth plywood supports. The shutter shall include

full-depth shelves securely rested on heavy-duty shelf

buttons. All exposed surfaces shall be laminated with

mm thick laminate for moisture resistance and finished

appearance. Auto hinges and 8–10 cm stainless steel

111 handles shall be fixed to ensure smooth operation. All 12.48 Sqmt 13768.70

necessary screws, nuts, bolts, and adhesives shall be

used, and the work shall be completed in proper

alignment and approved finish as per the Engineer’s

instructions, ensuring durability, functionality, and

aesthetic integration with the washbasin unit.inlcuding

labour and ply should be used IS 710 ISI mark

Providing, supplying, and fixing wall-mounted modular

kitchen wardrobes as per the approved design. The

wardrobe shall be constructed with 18–19 mm thick

BWP plywood for the main carcass and shutter, with

full-depth 18 mm plywood shelves supported on heavy-

duty shelf pins. All shutters and exposed surfaces shall

be finished with laminate, veneer, or paint as selected

by the architect, ensuring a high-quality, durable, and

moisture-resistant surface. Glass panels shall be

incorporated as per the drawings and specifications

provided by the architect. The wardrobes shall be

112 installed strictly according to the 3D reference 8.14 Sqmt 23300.87

drawings, architectural drawings, and instructions

provided by the Engineer in charge, ensuring proper

alignment, functionality, and aesthetic integration with

the overall modular kitchen layout. All necessary

hardware including auto hinges, handles, screws, nuts,

bolts, and adhesives shall be supplied and fixed. The

work shall be executed to achieve a neat, precise, and

durable finish in accordance with the approved design.

Providing, fabricating, supplying and fixing Side Table

(approx. size 450mm x 450mm x 450–500mm height)

made out of 19mm thick BWP plywood framework with

necessary supports, finished externally with approved

veneer/PU polish or laminate finish as per Architect’s

selection and internally with 0.8mm balancing laminate,

complete with one or more drawers/shelves as shown

in the approved 3D reference drawings and detailed

architectural drawings. All hardware fittings including

113 auto hinges, soft close channels, handles, screws, 8.00 sqmt 21182.61

adhesive and accessories shall be of approved make

and quality. The item shall include all cost of raw

materials (plywood, veneer/laminate, polish, adhesives,

hardware, etc.), labour, tools & tackles, finishing,

polishing, transportation, wastage, and cleaning of site,

executed strictly as per the Architect’s/Engineer’s

Sr No Description QTY Unit Total Rate Amount

Providing, fabricating, supplying and fixing King Size

Bed of approx. size 6’-6” x 6’-0” including 19mm thick

BWP plywood framework with necessary supports, full

depth storage as per approved 3D drawings and

architect’s instructions, finished externally with

approved veneer/PU polish and internally with 0.8mm

balancing laminate, complete with branded hardware

fittings such as auto hinges, handles, soft close

114 channels, hydraulic lifters (if required), screws and 6.00 Nos 73824.15

adhesives, including supply and placement of standard

king size branded mattress with adequate thickness

and 2 nos. pillows, with all materials, labour,

transportation, tools & tackles, wastage, finishing,

polishing and cleaning, all complete as per the direction

of the Architect/Engineer in charge.

Approved Make: Godrej / Natuzzi/ Stanley/ Ashley/ HNI

Providing, fabricating, supplying and fixing a Bedroom

TV Unit of approximate size 1800 mm (W) × 450 mm

(D) × 600 mm (H) or any size and finish as per

approved 3D reference drawings and architectural

details, made of 19 mm thick BWP plywood frame with

necessary supports, finished externally with approved

veneer/PU polish or laminate and internally with 0.8 mm

balancing laminate, complete with drawers, shelves,

and cable management as per design, including all

hardware such as drawer slides, hinges, handles,

screws, adhesives, and accessories of approved make,

with supply of all raw materials, fabrication, finishing,

installation, transportation, labour, tools & tackles,

wastage, and cleaning, executed strictly as per

Architect’s/Engineer’s instructions.

Providing, fabricating, supplying and fixing wooden

partition wall for the bedroom as per approved 3D

reference and architectural drawings, made of 19 mm

thick BWP plywood / solid wood frame with necessary

supports, finished externally with approved veneer/PU

polish or laminate and internally with 0.8 mm balancing

laminate, including decorative design elements, panels,

cut-outs, or patterns as shown in the approved

drawings. The partition shall include all necessary

116 hardware, fasteners, screws, adhesives, and 11.76 Sqmt 15886.97

accessories of approved make, and be fixed securely

to floor, ceiling, and adjoining walls as required. The

scope includes supply of all materials, fabrication,

finishing, installation, transportation, skilled and

unskilled labour, tools & tackles, wastage, and

cleaning, executed strictly in accordance with the

Architect’s/Engineer’s instructions.

Sr No Description QTY Unit Total Rate Amount

Providing, fabricating, supplying and fixing Study Table

with Side Wardrobe and Chair in the bedroom as per

approved 3D reference drawings and architectural

details, made of 19 mm thick BWP plywood framework

with necessary supports, finished externally with

approved veneer/PU polish or laminate and internally

with 0.8 mm balancing laminate. The study table

(approx. size 1200 mm × 600 mm × 750 mm or as per

drawings) shall include drawers, shelves, keyboard

tray, and cable management as designed, complete

with all hardware fittings such as auto hinges, soft-close

channels, handles, screws, adhesives, and accessories

of approved make. The side wardrobe (approx. size

117 600 mm × 450 mm × 2100 mm or as per drawings) 6.00 Set 59059.33

shall be fabricated in matching plywood and finished in

veneer/laminate with shelves, hanging provision, and

drawers as per design, including all hardware fittings. A

chair of approved design shall be provided,

ergonomically suitable, with cushioned seat and back

finished with fabric or laminate as specified. The item

includes supply of all raw materials, fabrication,

finishing, polishing, installation, transportation, labour,

tools & tackles, wastage, and cleaning, executed strictly

in accordance with Architect’s/Engineer’s

Providing, fabricating, supplying and placing Side Sofa

(two / three seater as per approved size) in the

bedroom as per reference 3D drawings and

architectural details, made of kiln-seasoned hardwood

frame with supports in 19 mm BWP plywood where

required, fixed with heavy duty elastic webbings / zig-

zag springs, high-density foam cushions of approved

thickness and density for seat and back, upholstered

with approved fabric / leatherette finish, and complete

with matching loose pillows (2–3 nos. or as specified).

All exposed wooden portions shall be finished with

veneer / polish or laminate as per Architect’s selection.

The work includes supply of all raw materials (wood,

ply, foam, upholstery fabric, pillows, polish, adhesives,

fasteners), fabrication, stitching, polishing, finishing,

transportation, labour, tools & tackles, wastage, and

cleaning, executed strictly as per approved 3D and

Architect’s/Engineer’s instructions.

Sr No Description QTY Unit Total Rate Amount

CUPBOARD WITH DRESSER UNIT IN LAMINATE &

Providing and fixing Cupboard with dresser unit which

is made from 18mm thick BWP Grade plywood with out

side 1mm thick Premium finish Laminate and inside

with 1mm thick white backing lamiate sheet,Cupboard

with inside 19mm dia SS Hanging pipe and two nos of

drawer which is sliding on standard teleschopic

channels, Cupboard with combined dresser unit which

ismade from 19mm thick BWP Grade plywood with

1mm thick Premium laminate sheet outside and 1mm

thick backing laminate sheet inside.Dresser unit with

twonos of drawers which is sliding onstandard

teleschopic channels with SS finish handels, Dresser

unit with 5mm thick clear modiguard mirror with

beveled edges and proper fixing. All the plywood

borders are finish with teak wood battens and

malamine polish.Complete as directed by engineer in

HIGH BACK LEATHERETTE CHAIR IN BLACK

COLOUR WITH MATTE FINISH

SPECIFICATION : OFFICE SEATING - - BLISS

* HIGH BACK 360° DEGRE REVOLVING CHAIR SKU

: UTRC/33209/HB

* ALL OVER SIZE IS : 615MM(L)X 530MM(D)X

*THE CHAIR MADE OF FULL LEATHERETTE IN

IT WILL COMES IN MATTE FINSIH IN

CONTEMPORARY STYLE .

* ARMS : FIXED ARMS P.P. CONNECTED WITH

SEAT AND BACK .

* USE OF PLY: 12 MM THICK HOT PRESSED BWR

PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK)

* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM

WITH DENSITY 32 (±3) KG PER CU METER FOR

BEST QUALITY CUSHIONING IN SEAT , * BACK :

± 2 MM THICK POLYURETHANE FOAM WITH

DENSITY 32 (±3) KG PER CU METER FOR BEST

QUALITY CUSHIONING IN BACK . BACKREST

SUPPORT FOAM DESIGN BASED ON

SYMMETRICAL LUMBAR SUPPORT * MECHANISM :

CENTRE TILT MECHANISM .* ONLY SEAT SIZE IS

530MM(L)X 535MM(D)X 545MM(H) & THE BACK

SIZE IS 615MM(L)X 730MM(H) SEAT MAXIMUM

HEIGHT IS 545MM & MINIMUM HEIGHT IS 445MM &

BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS

1230MM & MINIMUM HEIGHT IS 1130MM * GAS

Sr No Description QTY Unit Total Rate Amount

Preparing structural design of RCC Under Ground /

Partially under ground / above high ground level

Reservoir of required capacity as per relevant I.S.

standards and constructing the same, including

excavation in all types of soil strata (including rock)

including shoring strutting if required, for loose soil / to

protect from collapse, casting 100 mm thick P.C.C.

levelling course in M- 15, Refilling the pit with proper

soil and disposing of the surplus stuff at all lead.

Including cement plaster in CM 1:2 with approved water

proofing compound to all over inside container (i.e.

walls, base, top slab/dome bottom etc. all). Including all

types of labour and material charges of lowering,

laying, erecting / hosting and jointing of pipe assembly

to inlet, outlet overflow, washout and bye pass

arrangement as per hydraulic design. Providing and

fixing accessories, CI Manhole frame and cover, water

level indicator, adequate cowl type ventilators or lantern

type ventilator with stainless steel jail. RCC chambers

for valves. Providing and applying three coats of

cement paint / snowcem to the out side face of

structure. It also includes satisfactory water tightness

test as per relevant I.S. code and painting name of

scheme and capacity on the tank as per direction of

engineer in charge.

List of Indian Standards for Design of GSR / SUMP The

structural design of GSR shall be in accordance with

provisions relevant I.S standards (1) I.S. 3370 part I & II

2009 or Its latest revision(1.1) I.S. 3370 part III & IV

1965 or Its latest revision (2) I.S. 456 – 2000 or Its

latest revision.(3) I.S. 1893 – 2000 – 1984 or Its latest

revision.(4) I.S. 875, Part – 1 to 3, 1987 or Its latest

General Specifications:-

Point wiring for Light / Bell with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories

and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

122 covered with textured/metallic/white front plate modules 140.00 nos Rs.481.00

erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete. cat III.

Sr No Description QTY Unit Total Rate Amount

Point wiring for secondary light point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires, in below type of pipe to be erected

complete with earth continuity and necessary

connection with primary light with accessories erected

on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed

wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete.

Point wiring for FAN with 2-1.5 sq.mm & earthwire of

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multistrand copper wires,

in below type of pipe erected with 6A Modular type

switch and hum free EME four or more step type

electronic fan regulator with separately mounted and

accessories with earth continuity of following type

124 erected on PVC / Metallic/Wooden box, single 20.00 nos 668.00

mounting base frame covered with textured/metallic

front plate modules erected on / in wall / ceiling as per

pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid

PVC pipe and accessories erected concealed in

wall/ceiling complete. cat III.

Point wiring for Two Way Controlled Light Point with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are

of .ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires erected in below type of pipe with

6A Modular type switches and following type of

accessories erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary batten/angle

holder or ceiling rose or H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete. cat III.

Point wiring for on board Looped Plug with 6A Modular

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories. cat III.

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories. [I] For 6A

Plug with 2-1.5 sq.mm Cu. Wire.(f) with medium class

Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete. cat III.

Sr No Description QTY Unit Total Rate Amount

Point wiring for Individual Plug with & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in below

type of pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected

on / in wall / ceiling as per pipe erected with following

type of accessories. [II] For 16A Plug with 2-2.5 sq.mm

Cu. Wire. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete. cat III.

Point wiring for Individual Plug with & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in below

type of pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected

129 on / in wall / ceiling as per pipe erected with following 20.00 nos 863.00

type of accessories. [III] For 16A Plug and 16 amp

switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm (

green) earthing wire from mcb d b board.. (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete. cat III.

Providing & erecting Switch board for Computer or

electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame

covered with textured/metallic /white front

130 plate,modules erected with necessary connections as 4.00 nos 1122.00

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug . For Modular Type Accessories.

SITC of Face Plate - Single (Keystone Jack,square)

[Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ].

SITC of Jack Cat 6 Keystone UTP

132 [Approved by Competent Authority i.e. not Below the 24.00 nos 160.00

rank of Executive Engineer ].

Supplying & erecting approved make LAN cable of

133 following size in existing pipe as per direction. [D] CAT - 800.00 mtrs. 76.00

6 e. for LAN points & for cctv points.

Providing & Erecting 6 core fibre optic SM 9/125um

134 double sheath, CSTA, Unitube, Outdoor cable (per m). 100.00 mtrs. 60.00

Supplying & erecting approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in

two pairs, & wrapped with FRLS PVC tape & sheathed

with FRLS PVC or HFFR outer Jacket suitable for

135 telephone wiring & confirming to C-DOT erected in 100.00 mtrs. 124.00

existing pipe. of following size of conductors & nos.of

pairs. With necessary connections. [A] Conductor Size

0.5 mm . (b) Armoured [Jelly Filled]. (1) Ten Pairs.

Sr No Description QTY Unit Total Rate Amount

Supplying & erecting approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in

two pairs, & wrapped with FRLS PVC tape & sheathed

with FRLS PVC or HFFR outer Jacket suitable for

136 telephone wiring & confirming to C-DOT erected in 600.00 mtrs. 20.00

existing pipe. of following size of conductors & nos.of

pairs. With necessary connections. [A] Conductor Size

0.5 mm . (a) Unarmoured. (2) Two Pairs.

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed by

Engineer In charge. (3) Two Pin/RJ-11 Telephone

Socket. [B] For Two Gang. Cat III.

Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

138 fittings & Junction boxes fixed with adhesive solution & 600.00 mtrs. 18.00

Clamps with following dia of pipes, in approved manner

Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

139 fittings & Junction boxes fixed with adhesive solution & 800.00 mtrs. 27.00

Clamps with following dia of pipes, in approved manner

Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

140 fittings & Junction boxes fixed with adhesive solution & 150.00 mtrs. 47.00

Clamps with following dia of pipes, in approved manner

Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-

nuts etc. complete of following sizes. (1) 20 mm.

Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-

nuts etc. complete of following sizes. (2) 25 mm.

Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-

nuts etc. complete of following sizes. (3) 32 mm.

Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (a) with medium class Rigid

PVC pipe and accessories (b) 2 wire 2.5 sq. mm.

Sr No Description QTY Unit Total Rate Amount

Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with

sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe

and accessories (a) 2 wire 4 sq. mm.

Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with

sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size. (a) with medium class Rigid PVC pipe

and accessories (b) 2 wire 6 sq. mm.

Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with

sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size. (a) with medium class Rigid PVC pipe

and accessories. (h) 4 wire 6 sq. mm. (Main Panel to

Supply, Installation, Testing and Commissioning of

suitable sweep, BEE 5 Star rated, Ceiling fan with

Brush Less Direct Current (BLDC) permanent ferrite

magnet Motor, class of insulation: B, Rust free

nos.Aluminium blades, 2 nos. canopies, shackle kit with

earthing provision, copper winding, Power factor not <

0.9, Service Value (CMM/W) minimum 6.85, Air

delivery minimum 215 CMM, 350 RPM,230v (tolerance

as per IS : 374-2019), THD < 10%, with remote unit for

Speed Control and all remaining accessories including

safety pin, nut bolts, washers, temperature rise =

degree C (Max.), suitable for 140 to 285 Voltage and

rectifier circuit with surge, over current and overload

protection , 50 Hz, Single phase AC Supply, earthing

etc. Complete as required. [ Make shall be approved by

Engineer in Charge] . (B) 1200 mm Sweep (48").

Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly painted

for fan complete with proper insulation without leckage

Supplying & erecting fan hook box of 10 mm M.S.

round bar bounded to the RCC bars up to 50mm length

each side and pierced through a 16 Gauge M.S. box /

Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing.

Supplying & erecting single phase approved make

industrial exhaust fan suitable for medium duty ring

mounted low noise operation suitable for medium duty

151 having following dia size and maximum speed in RPM 2.00 nos. 3899.00

[E] 450 mm dia 1400 RPM.

Supplying & erecting approved make low noise

decorative exhaust fan having square frame ABS body

with inbuilt lowers & square frame. 200mm with

1350RPM Cat.II.

Sr No Description QTY Unit Total Rate Amount

Supplying and erecting approved make oscillating type

medium duty bracket fan with Aluminium Blades A.C.

23OV. 50cy/s, with thermal overload protection wall

mounted with height adjustment and rotary tilting device

complete with guard, pull cord for speed and oscillation

flexible Core plug top complete erected with lead wires

as directed. (a) 450mm.

Decorative call bell Ting-tong box type 250 volts

complete erected.

Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing

box having following capacity. - use for AC control.

(A) 6 to 32 Amp. cat III.

Sheets steel powder coated enclosure suitable for

156 incorporating One/Two nos. MCB. - use for AC control. 12.00 nos. 175.00

providing and erecting Miniature circuit breaker single

pole 6A to 25A suitable to operate on 240 V A.C.

157 system and having breaking capacity 10 KA to be 72.00 nos. 111.00

erected in existing box. confirming to IS 8828/1996 with

ISI Mark. cat III.

Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA

158 breaking capacity & confirms to IS : 8828 in existing 12.00 nos. 297.00

box having following capacity

(A) 6 to 32 Amp. cat III.

Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA

159 breaking capacity & confirms to IS : 8828 in existing 2.00 nos. 327.00

box having following capacity. (B) 40 Amp. cat III.

Approved make ELCBs / RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable for operation on

single phase 240 V. having characteristic of quick

160 action & tripping with all advance feature & do not 12.00 nos. 1950.00

incorporate any electronic component. for following

Max. rating erected as directed.

(i) 25 Amps.DP. cat III.

Approved make ELCBs / RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable for operation on

single phase 240 V. having characteristic of quick

161 action & tripping with all advance feature & do not 12.00 nos. 2213.00

incorporate any electronic component. for following

Max. rating erected as directed.

(ii) 40Amps. DP . cat III.

Providing & erecting 415V MCB Four Pole Switch for

Lighting Load (B curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

(a) 6 to 32 Amp

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking

163 capacity & confirms to IS :8828 in existing box having 8.00 nos. 730.00

following capacity (c)63 Amp. cat III.

Sr No Description QTY Unit Total Rate Amount

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release

164 suitable to work on A.C. supply 50 c/s. with all internal 2.00 nos. 6112.00

connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of

ICU only Cat III.

Half / One Module Blanking Plate of Standerd Size.

Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted fitted

with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used)

suitable for (B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type (PPI).

(b) sheet steel double door. (ii)6 way.

Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted fitted

with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

167 MCB to house appropriate nos. of MCBs.(The DBs 2.00 nos. 623.00

should be used of same company of MCB to be used)

suitable for (A) single phase incoming and horizontal

single phase outgoing. (b) sheet steel double door (IP-

Providing & erecting weather proof, dust & vermin

proof, floor mounted front operated indoor type cubical

panel board having necessary IP-42 protection & above

as per requirements made from 14 SWG thick CRC

M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary

supporting angles, flats including cutting, bending,

drilling, welding, riveting with internal partitions & cable

alley as per requirements & instruction of engineer-in-

charge with erection of supplied switch gears,

BUSBARS, with suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,

heavy duty end terminal connections complete. The

Panel shall be painted with epoxy powder coating. (The

rates excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding

base beams) The panel shall be supplied with following

approved manufacturers with following size.

(A) locally fabricated panel board

(i) with 350 mm depth .

Sr No Description QTY Unit Total Rate Amount

Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically

169 for control panel, relays, power switchgears, motor 12.00 mtrs. 17.00

starters & control wiring) with required size of copper

lugs, nuts and bolts if required.

(b) One wire 1.50 sq. mm.

Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically

170 for control panel, relays, power switchgears, motor 12.00 mtrs. 37.00

starters & control wiring) with required size of copper

lugs, nuts and bolts if required.

(d) One wire 4.00 sq. mm.

Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically

171 for control panel, relays, power switchgears, motor 12.00 mtrs. 56.00

starters & control wiring) with required size of copper

lugs, nuts and bolts if required.

(e) One wire 6.00 sq. mm.

Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically

172 for control panel, relays, power switchgears, motor 12.00 mtrs. 91.00

starters & control wiring) with required size of copper

lugs, nuts and bolts if required.

(f) One wire 10.00 sq. mm.

Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically

173 for control panel, relays, power switchgears, motor 12.00 mtrs. 141.00

starters & control wiring) with required size of copper

lugs, nuts and bolts if required.

(g) One wire 16.00 sq. mm.

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release

174 suitable to work on A.C. supply 50 c/s. with all internal 2.00 nos. 6112.00

connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of

ICU only Cat III.

Sr No Description QTY Unit Total Rate Amount

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of

ICU only Cat III.

Add Rs. 10% extra for housing/Encloser of MCCB for

Item No 3-4-1 to 3-4-12 (The Enclosures should be

used of same company of MCCBs to be used).

Approved make Earth fault Relay suitable to mount with

inter connection to moulded case circuit breaker having

CT ratio & MCCB rating as following along with shunt

176 trip 220V AC. with all internal connections & complete 2.00 nos. 4641.00

erected in existing M.S.housing.

Supplying & erecting approved make Four Pole 415V

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for

(C)100-125A cat III.

Supplying and erecting triple pole & neutral 440V /

500V panel mounting Copper Busbars with four equal

Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section

area) duly wrapped with colour insulating tape for

178 phase sequence of following current carrying capacity, 2.00 mtrs. 1942.00

erected with necessary bus bar supports /insulators,

main cable socket to each bar, erected in existing

cubical panel with necessary connections.

(A) Suitable for 100 Amp. Capacity.

Supplying and erecting approved make panel mounting

type Digital Voltmeter having 3 digits LED display, 0 to

179 750 AC Volts range erected on existing panel board 2.00 nos. 1263.00

with all connection, wiring etc .with manufacturers

calibration certificate.

Supplying and erecting approved make panel mounting

type Digital Ammeter having 3 digits LED display,

external CT operated, calibrated for 0 to 1000 Amps

180 suitable to operate on 500 Volt AC , erected on existing 2.00 nos. 1543.00

panel board with all connection, wiring etc .with

manufacturers calibration certificate.

Supplying and erecting Ammeter / Voltmeter selector

181 switch for 3 phase AC Supply 500 V on existing panel 4.00 nos. 314.00

board with necessary connections.

Supplying and erecting approved make suitable panel

182 indicator LED type lamp, lens cover, complete erected 4.00 nos. 43.00

with necessary connections.

Sr No Description QTY Unit Total Rate Amount

Supplying & erecting in earthpit of minimum bore dia.

225mm size approved make Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of

mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation

suitable for following type of applications with chamber

and heavy duty cover (A)(approved make OEM has to

submit test certificate including value of earth

resistance of installation duly stamped and signed by

183 agency and officer Incharge has to ensure the value of 4.00 nos. 5785.00

earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report

must be submitted by Agency.

[A] For electrical installation up to 440 V

Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs.

Providing and erecting Annealed bare Copper wire 8 to

Providing and erecting required size Copper strip for

185 earthing of H.T. OCB / ACB/ Transformer, LT panel 20.00 kg. 787.00

board, Motors etc. using copper clamp.

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cables. (B) 4 core 16 Sq. mm .

(Main mccb to main panel.).

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper conductor

for 1.1 KV. to be laid on wall with necessary clamps or

187 in existing trench / pipe at road crossing or floor of 100.00 mtrs. 269.00

following size of cables. (A) 4 core 2.5 Sq. mm .

(Main feeder Panel to Streetlight fixtures).

Supplying and erecting Flexible PVC insulated multi

strand multi core 1.1 kv grade ISI marked copper wires

188 of following size to be erected as directed. (e) 1.50 12.00 mtrs. 46.00

Sq.mm 3 core round PVC sheathed. - streetlight pole

box to fixture .

Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating tape etc

for following size of cables. (E) 2 to 4 core 25 Sq. mm.

(Main mccb to main panel.).

Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating tape etc

for following size of cables. (B) 2 to 4 core 6 Sq. mm.

(Main floor sub Panel to PDB, LDB, VRF ACDB, UPS

I/P DB, lift.).

Sr No Description QTY Unit Total Rate Amount

Solder less crimping type Copper lugs conforming to IS

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/2.5 to 6 Sq.mm. (Main feeder Panel to

Solderless crimping type Copper lugs conforming to IS

suitable for cable of following size evenly crimped with

192 high pressure tool & connected to switchgear terminals 16.00 nos. 12.00

with brass/cadmium plated nut bolts in an approved

manner. (C) 16 Sq.mm. .

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories of

same material at required depth for laying of cable.

below ground /road surface for enclosing cable and

back filling the same to make ground as per

original.(A)50 mm dia.

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

shown.) (A) Tube Light with integral driver.(v) 36-40

Watts, Surge-2 KV, IP-20, conventional 4 feet. cat III.

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.9,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting

clips complete.IP20. (iii) 16-20 watts, Surge-2 KV. cat

196 DECORATIVE WALL LIGHT FIXTURES. 24.00 nos. 4000.00

197 PROFILE LIGHT FIXTURES. 50.00 mtrs. 1800.00

198 DECORATIVE HANGING LIGHT FIXTURES. 6.00 nos. 5000.00

Sr No Description QTY Unit Total Rate Amount

Making trench in soft soil of suitable width of 90 cm

deep for laying cable or locating the fault all over the

run and back filling the same and making the surface

as normal ground.

Supplying stand first AID box with antiseptic cream,

medicine for use on wounds due burn, crepe bandage,

gauge bandage, medicated ready to use bandage

200 (Band-aid) adhesive tape for medicinal user, Scissors, 2.00 nos. 297.00

anti-septic solution (Savlon or similar) etc. (All above

contents shall be of standard makes).

Supplying and erecting floor mounting stand for

keeping four nos. of FIRE buckets comprising 1500 mm

in length, 900 mm height frame made out of 30mm

201 X30 mm X 4 mm angle iron with cross supports for 2.00 nos. 933.00

legs, welded with 4 hooks and duly painted with one

coat of red lead and two coats of approved enamelled

Providing and fixing printed instruction chart both in

English and Gujarati and duly framed with front

glasses, for treatment of person suffering from Electric

shock with minimum 50" diagonally size.

Providing and erecting Inverter based approved make

split air-conditioning unit consisting of condensing unit

with variable speed fan motor, inverter type

hermetically sealed rotary compressor with accessories

etc. duly connected separately erected evaporating unit

and blower motor with its accessories by means of

extra supplied proper insulated copper tubing,drain

PVC pipes suitable for ( cost includes Eco Friendly

green gas charging and 15A plug top & Remote Control

& MS Stand) with necessary core cutting. (2)For ISEER

Range (KWH/KWH)(4.0 to 4.49). (C) for 1.7 to 2 ton

capacity-Premium Cat. Premium category:O-General,

Mitsubishi electric.

Supplying and installing MS angle , powder coated /

Painted standard type of wall/floor stand mount for

outdoor unit of split AC of following capacity, erected

204 with necessary hardware materials as directed. (A) 6.00 nos. 1305.00

25mm*25mm*3mm thick M.S angle suitable for upto

TR. Capacity of ac machine.

Supplying and erecting approved make online Un-

interruptible Power Supply system comprising flat cum-

boost charger with IGBT base rectifier & Inverter &

sealed maintenance free SMF batteries. The charger

having operating capacity for input 160-270V AC &

inverter having output 230V,50 Hz Ac with 0.8 load

205 power factor with battery, over/under voltage output 2.00 nos. 128815.00

with over load & short circuit protection equipment. The

system housed in CRC sheet duly powder coated paint

with following power backup.with MS painted batteries

stand, 10% Overload capacity for momentary load. (D)

5 KVA with 1Hr Backup.

Sr No Description QTY Unit Total Rate Amount

Supplying and erecting horizontal / vertical mounting

type storage water heater with copper container housed

in M.S./S.S./ABS body insulated with glass wool/puff

complete with heating elements,adjustable thermostats

206 300C to 850C, indicating lamp, safety valve, fusible 8.00 nos. 8291.00

plug, etc.complete erected with coach bolts, nuts.

washers & cementation . (A) 10 Ltr. with 3 KW.

heating element. Premium Category.

Providing, supplying, installing, testing and

commissioning of LED Smart Television of size 65-75

inch (diagonal), Ultra High Definition (4K), with inbuilt

smart features such as Wi-Fi, Bluetooth, USB, HDMI

and AV ports, screen mirroring and compatible

applications, including all required ISI-marked copper

wiring with conduits/raceways, HDMI and power cables,

207 heavy duty wall-mount bracket with fasteners, remote 2.00 nos. 110000.00

control, power stabilizer/surge protector, and complete

integration with existing sound system if required, along

with full installation, alignment, configuration, testing

and demonstration, of approved make such as Sony /

LG / Samsung or equivalent, complete in all respects

as directed by the Engineer in charge.

208 DGVCL CONNECTION CHARGES. 2.00 Each 75000.00