PROCUREMENT OF DIFFERENT RUBBER ITEMS O RING, BELLOWS, CORD, FLAME SCANNER HOSE, ETC TO BE USED DURING UNIT-3 OVERHAULING

PROCUREMENT OF DIFFERENT RUBBER ITEMS [O RING, BELLOWS, CORD, FLAME SCANNER HOSE, ETC] TO BE USED DURING UNIT-3 OVERHAULING

HOSE,SIZE-60MM ODX 51MM ID,WIRE BRAIDED FOR OIL BURNER COOLING & FLAME SCANNER AIR RUBBER HOSE LINE PRESSURE:10KG /CM2,TMP:120 DEG C, LENGTH 1500MM ( WITH JUBILEE CLAMP AT BOTH ENDS. LENGTH OF THE HOSE WILL BE 1300 MM MOC: INNER MATERIAL : NITRILE OTTER RUBBER OUTER MATERIAL: NATURAL RUBBER )

GASKET , VICTAULIC COUPLING 23.5 INCH FOR COAL MILL XRP 1003 BOWL MILL CCP ( MOC:GOOD QUALITY SILICON RUBBER )

GASKET , VICTAULIC COUPLING 26 INCH FOR COAL MILL XRP 1003 BOWL MILL CCP ( MOC:GOOD QUALITY SILICON RUBBER )

RUBBER GASKET(1450X540X35X25) FOR COAL FEEDER DOOR(RECTANGULAR TYPE) MOC:NEOPRENE RUBBER ( APPLICATION:WELDMENT DOOR (FRONT & REAR RECTANGULAR TYPE) FOR COAL FEEDER, STAGE-II )

RUBBER GASKET(825X455X25X15) FOR DOOR OF LOAD CELL OF COAL FEEDER MOC:NEOPRENE RUBBER ( APPLICATION: WEIGH DOOR (SIDE DOOR)FOR COAL FEEDER,STAGE-II )

RUBBER BUSH FOR TAKE UP PULLEY FOR COAL FEEDER (EG3651) RUBBER BUSH FOR TAKE UP PULLEY TIGHTENING SHAFT OF COALFEEDER(EG3651) MOC:NEOPRENE RUBBER ( APPLICATION:FOR COAL FEEDER TAKE-UP SCREEN(BACK UP PULLEY TIGHTNING SHAFT), STAGE-II )

VITON RUBBER CORD 2.5MM DIA

CORD,VITON RUBBER,OD- 5 MM

CORD,VITON,5.5 MM DIA

RETURN LUBE OIL LINE BELLOW (LENGTH:160) FOR PA FAN RETURN LUBE OIL LINE BELLOW (LENGTH:160 MM) FOR PA FAN

RETURN LUBE OIL LINE BELLOW (LENGTH:162) FOR FD FAN FD FAN RETURN LUBE OIL LINE BELLOW, LENGTH:162 MM

EXPANSION BELLOW FOR FD FAN.SIZE:250 MM # Wide*12.5 mtrs.Long*4mm Thickness.MOC:RAYON IMPREGNATED NEOPRENE RUBBER.

EXPANSION BELLOW FOR PA FAN # SIZE:250MM WIDE*10MTR LONG*4MM THICKNESS.MOC:RAYON IMPREGNATED NEOPRENE RUBBER

EXPANSION BELLOW L-4.6MTR,W230MM,T2.5MM FOR SUCTION OF SEAL AIR FAN NDFV12.5H MOC:RAYON IMPREGNATED NEOPRENE RUBBER

EXPANSION BELLOW L-3.3MTR,W200MM,T2.5MM FOR DISCHARGE OF SEAL AIR FAN NDFV12.5H MOC:RAYON IMPREGNATED NEOPRENE RUBBER

EXPANSION BELLOW L-1.4 MTR,W120MM,T2.5 FOR SUCTION OF FLAME SCANNER COOLING FAN HACB501 MOC:RAYON IMPREGNATED NEOPRENE RUBBER

EXPANSIONBELLOW L-1.55MTR,W135MM,T2.5MM FOR DISCH OF FLAME SCANNER COOLING FAN HACB501 MOC:RAYON IMPREGNATED NEOPRENE RUBBER

O-RING,SIZE-77MM ID X 4.1MM CD (THK) FOR FD/ID FAN FILTER CASING MOC: H.G.NITRILE

O-RING,SIZE-23.8 MM ID X 2.5 MM CD (THK) FOR FD/ID FAN FILTER CARTRIDGE MOC:-NEOPRENE

O-RING,SIZE-43 MM ID X 3MM CD (THK) FOR PA FAN FILTER CARTRIDGE MOC:-NEOPRENE

O-RING,SIZE-93.4 MM ID X 3.1 MM CD (THK) FOR PA FAN FILTER CASING MOC:-NEOPRENE

O RING, SIZE: 25X20X2.5 MM FOR PA FAN(PAF19/10.6-2) STRAINER CHANGE VALVE MOC-NEOPRENE

O-RING FOR MILL (XRP1003) UPPER JOURNAL BEARING HOUSING MOC- VITON

O-RING FOR MILL (XRP1003) SEAL WEAR RING(SLEEVE) OF RJ MOC-VITON

SEAL INSERT SEAL OF 200 NB DOME VALVE # FOR BOWL MILL REJECTION SYSTEM ( MOC: HIGH QUALITY SILICON RUBBER )

O-RING(SILICON) OF 200NB DOME VALVE FOR MILL REJECT SYSTEM PART NO: N1035 MACAWBER BEEKAY ( MOC: HIGH QUALITY SILICON RUBBER )

GASKET FOR DRESSER COUPLING FOR BOWL MILL XRP 1003. ( MOC: HIGH QUALITY SILICON RUBBER )

The Sen & Co (BID ID -6712606)

RIGS INDIA (BID ID -6739917)

HYGEINIC POLYMERS (BID ID -6732205)

S S RUBBERS PRIVATE LIMITED (BID ID -6727181)