Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.5 LAccepted-AOC ELID EWS SECTION ASSISTANT ENGINEER KANJIRAPUZHA GRAMAPANCHAYAT POTTASSERY P O | KOZHIKODE | KERALA | 612906 | ₹3.5 L | 1 | Accepted-AOC L1 |
| 2 | 2₹3.6 LRejected-AOC | ₹3.6 L | 2 | Rejected-AOC L2 |
| 3 | Rejected-Technical ELID EWS SECTION ASSISTANT ENGINEER KANJIRAPUZHA GRAMAPANCHAYAT POTTASSERY P O | THIRUVANANTHAPURAM | KERALA | 695001 | - | - | Rejected-Technical Highest |
| 4 | Rejected-Technical | - | - | Rejected-Technical Highest |
| Sl No | Description | Qty | Unit | RADHAKRISHNAN T C L4 | JAYARAM V R L2 | SASIDHARAN K L1 | MOHAMMEDKUTTY L3 |
|---|---|---|---|---|---|---|---|
| 1.00RAYAMTHURTUTHI ANGANAWADI | |||||||
| 1.00 | OD409031/2025-2026:Supplying and erecting Open well submersible pump with motor using best quality,
ISI marked motor and pump to suit the well, including cost of column pipe(UPVC), UG cable,
Nylon rope, and all
other fitting to including panel board etc and all charges for conveyance of materials,
labour, and cost of wiring (KSEBcharges for electrical connection paid seperately) etc.
complete. | 1 | each | 10,318.85 ₹10,318.85 | 14,000 ₹14,000 | 9,349.41 ₹9,349.41 | 9,805.75 ₹9,805.75 |
| 1.00 | 17.7B:Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. | 1 | no | 1,632.26 ₹1,632.26 | 3,500 ₹3,500 | 1,478.91 ₹1,478.91 | 1,551.1 ₹1,551.10 |
| 1.00 | 17.10.2.3:Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:
Kitchen sink without drain board470x420 mm bowl depth 178 mm | 1 | each | 3,413.91 ₹3,413.91 | 3,500 ₹3,500 | 3,092.82 ₹3,092.82 | 3,244.15 ₹3,244.15 |
| 1.00 | 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). | 0.12 | cum | 12,462.2 ₹1,532.85 | 10,000 ₹1,230 | 11,291.42 ₹1,388.84 | 11,842.53 ₹1,456.63 |
| 1.00 | 5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | 1.16 | sqm | 891.16 ₹1,033.75 | 750 ₹870 | 807.44 ₹936.63 | 846.85 ₹982.35 |
| 1.01 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | 6.18 | kilogram | 104.23 ₹644.35 | 115 ₹710.93 | 94.44 ₹583.83 | 99.39 ₹614.43 |
| 1.01 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 0.85 | cum | 7,151.22 ₹6,049.93 | 6,500 ₹5,499 | 6,479.37 ₹5,481.55 | 6,795.62 ₹5,749.09 |
| 1.01 | OD419494/2025-2026:Coolie | 5 | each | 1,003.28 ₹5,016.40 | 400 ₹2,000 | 908.85 ₹4,544.25 | 953.4 ₹4,767 |
| 1.01 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 164.73 | sqm | 342.8 ₹56,469.44 | 220 ₹36,240.60 | 310.59 ₹51,163.49 | 325.75 ₹53,660.80 |
Tender Value
₹4.1 L
EMD Value
₹10,369
Closing Date
3 Mar 2026, 6:00 pmClosed
Asst Engineer
LID and EW Kanjirapuzha GP
KANJIRAPUZHA GP 2025-26, PR NO.60/2025-26 MAINTANANCE OF VARIOUS ANGANVADIES IN KANJIRAPUZHA GP
2026_LSGD_839190_8
08/25-26/AE/LIDEW/KPGP
Open Tender
Civil Works - Others
180 days
Kanjirapuzha GP
Please refer Tender documents.
8 documents required · 8 mandatory
₹920
Yes
₹10,369
Yes
4 May 2026
23 Feb 2026
5 Mar 2026
23 Feb 2026
3 Mar 2026
23 Feb 2026
RAYAMTHURTUTHI ANGANAWADI
OD409031/2025-2026:Supplying and erecting Open well submersible pump with motor using best quality, ISI marked motor and pump to suit the well, including cost of column pipe(UPVC), UG cable, Nylon rope, and all other fitting to including panel board etc and all charges for conveyance of materials, labour, and cost of wiring (KSEBcharges for electrical connection paid seperately) etc. complete.
17.7B:Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock.
17.10.2.3:Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board470x420 mm bowl depth 178 mm
5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
OD419494/2025-2026:Coolie
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
8.31:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
18.54.1:Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms
50.18.8.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2
50.18.8.4.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 6Kgf/cm2
50.18.8.5.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2
50.18.8.7.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
OD409209/2025-2026:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site - OD created from DAR 60.7.1
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
13.111.1:Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
KOTTIYODE ANGANAWADI
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
17.1.1:Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete
OD413060/2025-2026:Coolie
10.29.1:Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides
13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
13.111.1:Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
VIYYAKURSSI ANGANAWADI
OD413083/2025-2026:Coolie
51.2.3:Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade
16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1413945.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.03 MB
Tendernotice_2.pdf
PDF • 0.02 MB
Tendernotice_3.pdf
PDF • 0.02 MB
Tendernotice_4.pdf
PDF • 0.16 MB
Tendernotice_5.pdf
PDF • 0.16 MB
BOQ_1413945.xls
BOQ • 0.33 MB
viewnit.pdf
Tender Documents • 0.02 MB
viewsbd.pdf
Tender Documents • 1.81 MB
Download all tender documents and submit your bid