RequiredOEM Authorization Certificate Bid to RA enabled No Executive Table ( 4 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Mode of supply Knocked Down To Be Assembled At Consignee Site By The Seller Assembled Ready To Use
RequiredKnocked Down To Be Assembled At Consignee Site By The Seller
RequiredKnocked Down To Be Assembled At Consignee Site By Consignee Himself Frame type Free standing * Understructure of table Gable end and modesty panel * 1/8 Storage provided Both side One side
RequiredBoth side
RequiredNo Storage Keyboard tray Not provided Provided
RequiredNot provided Foot rest Not Provided Provided
RequiredNot Provided MATERIAL Table top Material Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest MDF board of grade SBG II of IS 12406/Latest
RequiredThree layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest
RequiredCommercial Block Board BWP grade Conforming to IS 1659
RequiredDecorative Block Board BWP grade Conforming to IS 1659
RequiredCommercial Block Board MR Grade Conforming to IS 1659
RequiredDecorative Block Board MR Grade Conforming to IS 1659
RequiredTeak wood
RequiredCarved teak wood
RequiredOther wood Gable end and modesty panel material Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Flat single layer prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest
RequiredThree Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest
RequiredCommercial Block Board BWP grade Conforming to IS 1659
RequiredDecorative Block Board BWP grade Conforming to IS 1659
RequiredCommercial Block Board MR Grade Conforming to IS 1659
RequiredDecorative Block Board MR Grade Conforming to IS 1659
RequiredTeak wood
RequiredCarved teak wood
RequiredOther wood
RequiredNO Gable end and modesty panel Leg Material NO LEGS Teak wood
RequiredCarved teak wood
RequiredOther wood
RequiredNO LEGS MISC Table top long sides Edge to be banded with * 2/8 PVC tape of 2mm thick with the help of hot melt glue Table top plain sides Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Gable end and modesty panel plain side Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Number of buffers provided 4 Nos. at bottom * DIMENSION Thickness of table top ±2mm 19 5
Required9
Required12
Required15
Required19
Required25
Required38
Required50 Thickness of gable end and modesty panel ±2mm 19 * Length of table top ±10mm 1500 900
Required1200
Required1500
Required1800
Required2100
Required1372
Required1830
Required2200 Depth of table ±10mm 750 * Height of table ±10mm 750 * Dimension of leg(mmXmm) ±5mm No legs 40mmX40mm
Required50mmX50mm
Required60mmX60mm
RequiredNo legs STORAGE UNIT Number of Storage unit provided Double storage Single storage
RequiredDouble storage
RequiredTriple storage
RequiredFour storage
RequiredNo storage Width of storage unit ±10mm 400mm * Depth of storage unit in mm (±10mm) 700 * Height of smallest storage unit ±5mm N.A * Height of medium storage unit ±5mm N.A * Height of largest storage unit ±5mm N.A * KEYBOARD TRAY Type of keyboard tray N.A * Material of keyboard tray and Right angle L- type supporting bracket N.A * Keyboard adjustablity N.A * 3/8 fixing of supporting bracket N.A * Length of telescopic channe±l0mm N.A * Average weight of telescopic channel ±50Gms N.A * Keyboard front width±10mm N.A * Keyboard depth±10mm N.A * Keyboard height±10mm N.A * Finish of exposed edges of keyboard tray N.A * Material thickness of keyboard tray ±1mm N.A * FOOTREST Material of footrest N.A * Length of footrest ±10mm N.A * Depth of footrest ±10mm N.A * Height of footrest ±10mm N.A * Finish of exposed edges N.A * Material thickness of footrest ±2mm N.A 5mm
Required9mm
Required12mm
Required15mm
Required19mm
Required25mm
Required38mm
RequiredN.A COLOUR & FINISH Table top finish Laminate in colour with swede finish 0.6-0.8mm thickness of type S
RequiredF or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on other side * Table top shade Oak * WARRANTY Warrantee period in number of years 1 1
Required2
Required3
Required4
Required5 CERTIFICATION Test reports to be furnished to buyer on demand YES * Product having BIFMA certification NO * 4/8 OEM of offered product is ISO 9001:2015 certified YES * OEM of offered product is ISO 14001:2015 certified YES * OEM of offered product is ISO 18001:2007 certified YES * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
