Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.2 LAccepted-AOC 98 87 A CHANDRA MASTER ROAD P O NONA CHANDANPUKUR BARRACKPORE KOL 700122 | BARRACKPORE | NORTH 24 PARGANAS | WEST BENGAL | 700122 | ₹4.2 L | L1 | Accepted-AOC WORK ORDER HASBEEN ISSUED |
| 2 | L2₹4.2 LRejected-Finance 52 B MUKTAPUKUR NATUN PALLY 24 PGS N PIN 700123 | NORTH 24 PGS | WEST BENGAL | 700123 | ₹4.2 L | L2 | Rejected-Finance SECOND LOWEST |
| 3 | L3₹4.3 LRejected-Finance 54 4 NAGBAGAN ROAD SHYAMNAGAR 24 PGS N PIN 743 127 | SHYAMNAGAR | NORTH 24 PARGANAS | WEST BENGAL | 743127 | ₹4.3 L | L3 | Rejected-Finance THIRD LOWEST |
Tender Value
₹4.1 L
EMD Value
₹8,234
Closing Date
24 Jan 2026, 4:00 pmClosed
AE,BKPSD-II
SOUTH GATE MPU GANDHI GHAT
Vertical extension of walls above lintel and providing ofnew aluminiumpartitions wall andtemporary woodenpartition walls etc inconnection of shifting ofEmergency at patientwaitingroom of groundfloor of mainbuildinginDrBNBoseHospitalunderBkpDivn25to26
2025_WBPWD_979151_1
WBPWD/AE/BKPSDII/eNIT43/25-26
Open Tender
CIVIL WORKS
BARRACKPORE
Please refer Tender documents.
4 documents required · 4 mandatory
₹8,234
13 Mar 2026
24 Dec 2025
27 Jan 2026
24 Dec 2025
24 Jan 2026
24 Dec 2025
Dismantling carefully wooden walling, flooring of ceiling and stacking dismantled materials as directed. In Wooden partition walls above lintel level at Ground floor.
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.
Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.a) In ground floor including roof. In Existing drain wall. In Ground Floor.
Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping] (ii) 6mm.
(A) Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.)(iii) Sal : Malayasian .
Supplying, fitting and fixing white vitreous chinabest quality approved make wash basin with C.I. brackets on75 mm X 75 mm wooden blocks,C.P.waste fittings of 32mm dia.,one approved quality brassC.P.pillar cock of 15mm dia.,C.P.chain with rubber plug of30 mm dia.,approved quality P.V.C.waste pipe with C.P .nut 32 mm dia.,900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut ......(iii) 630 mm X 450 mm size.
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. ..... with approved paint in any position above ground. (a) For Exposed Work PVC Pipes (Dia) 50 mm.
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. II) Coloured. (A) In 10-12 Micron thickness Annodizing film.II) Coloured. i) Fixed partitions.(Unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 sq.m.) i) Top , bottom & side member.
ii) Intermediate member.
iii) Glazing clip.
Movable door shutter. ii) Shutter :
Bottom rail.
Lock rail
Door vertical.
Glazing clip.
(A) In 10-12 Micron thickness Annodizing film.I) Natural white. a) 2- track sliding window i) Bottom frame
ii) Top and side frame.
d) Shutter for all track sliding window. i) Bottom & Top member.
ii) Style side member.
iii) Interlock member.
i) Fixed partitions. (Unsupportedlengthofverticalmemberupto1.5mtr.Heightofbothends of vertical member restrained but panels within 0.9 sq.m.) i) Top , bottom & side member.
ii) Intermediate member.
iii) Glazing clip.
k) Movable door shutter. i) Door frame. (Top & sides).
ii) Shutter :
Bottom rail.
Lock rail
Door vertical.
Glazing cleap.
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units: (D) Partly glazed and partly panelled partition or fixed glazing made of extruded and anodised alloy aluminium sections, fabrications after cuttingtopropershapeandsize,drillingandaligning fittedwith inbuilt lockingarrangementcuttingtheglass /board(prelaminated/particle/ block) to requisite shapeandsizemoulding theedges fittedand fixed glazingclipsanddryset neoprine /EPDMgasket, alongwithallother necessaryarrangements for fixing thepartition towalls, floors, beams, columnspolysulphidesealantforwaterproofingifnecessarycompletein all respect as per drawing and specifications and direction of the Engineer in charge. In Ground Floor. b) 101.50mm x 44.45 mm Partition wall.
In Fixed Glazing above door of corridor of Supers office at 1 st floor.
(A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, includingcuttingtopropershape and size,drilling and aligning of window shutter frame fitted within built lockingarrangements,slidingrollersandothernecessaryfittings,fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintelsetc.)aswellasbetweenglassandshutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting torequisitesizeand fixingglassas per drawing, specification and direction of EIC. Therate includes thehirechargeof all toolsandplants, includingall incidentalcharges,adhesive, joineries such as screw,cleatangleetc.but excluding the cost of extruded aluminiumsections, glass, neoprene / EPDM gasket, locking arrangement and rollers. In 1 st floor. i ) 2 track sliding window.
(B) Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge.
In door of corridor of Supers office at 1 st floor.
Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.iii) weather gasket / wool pile for door vertical.
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. iv) 5mm thick coloured / tinted / smoke glass.
Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding onexisting Al./MS frame work with GI brackets,ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet ) with CP angles,cleats and strainless Steel screws forming groves at the periphery of ACP panel.Such grooves filled with foamand silicon sealant etc. complete with all materials (but including thecost of siliconsealant), labour, scaffoldingandall other incidental charges complete in all respect as per specification and directionofEngineer-in-charge. (Modeofpayment isonfinishedsurface area of ACP. (b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating)
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:(vi) 125 x 63 x 3.2mm.
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(viii) 225mm long x 12mm dia. bolt.
Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.(iii) 300mm x 16mm dia. bolt.
ii) Godrej Hydraulic door closer fitted and fixed complete.(a) Heavy type .
i) i) Door stopper.(Brass).
(B) Supplying 125 mm. Dia acrylic handle for aluminium door as per approved make & brand.b) Colour.
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.( See Page no - 1, It. No - 1 of 3rd CORRIGENDA & ADDENDA FOR SCHEDULE OF RATES OF PWD (W.B) wef 01.11.2017 Volume-I: (For Building Works, Materials & Labour))
Ordinary Cement concrete (mix1:1.5:3) with graded stonechips (20mm nominal size)excludingshutteringandreinforcement ifany, in ground floor as per relevant IS codes.
Removal of rubbish,earth etc. from theworking site and disposal of the same beyond the compound, in conformity with theMunicipal / CorporationRulesforsuchdisposal, loadinginto truckandcleaning the site inall respect asper direction of Engineer in charge.
Sub Total
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.26 MB
AllOtherDocuments.pdf
Additional Documents • 1.49 MB
BOQ_2386660.xls
BOQ • 0.32 MB
2911.pdf
Tender Documents • 1.86 MB
Download all tender documents and submit your bid