PROVN OF GUARD ROOM WITH TOILET FOR 06 X OR NEAR BLDG NO P25/2 AND SPL REPAIR OF RETAINING WALL NEAR BLDG NO P 18/14 AND CERTAIN MW AT MIL STN PITHORAGARH UNDER GE MES PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard / dense soil complete all as specified and directed

Excavation over areas not exc. 1.50 m deep and getting out in hard / dense soil complete all as specified and directed.

Excavation over areas exc. 1.50 m but not exc. 3.0 m deep and getting out in hard / dense soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shafts , wells, cesspits, manholes pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard / dense soil complete all as specified and as directed.

~Ditto~ all as per item but depth exc 1.5m but not exc 3.0 m.

Returning filling in, including spreading, levelling, watering and well ramming in layers n exc. 25cm in any type soil complete all as specified and as directed.

Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified and as directed.

M&L for Sand filling under floors or in foundations or laying of cable including watering and consolidation complete all as specified and as directed.

Removing excavated material (any type soils) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) as in slabs supported on walls, beams and columns etc complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) as in chajjas complete all as specified and as directed.

M & L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate, as in walls, retaining walls, basement walls, ballast wall and the like, any thickness above top of footing including attached pilaster and buttresses complete all as specified and directed.

M & L for use and waste of form work to faces of walls, retaining wall, abutments, parapets, staircase railing and similar works in rough finished flat concrete surface complete all as specified and directed.

M&L for formwork to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc ruogh finished surfaces of concrete flat complete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) for rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for formwork to chullah hoods, chajjas and similar items incl edges rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide complete all as specified and as directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for rough finished surface of concrete complete all as specified and as directed.

M&L for formwork to sides of pillars, posts, struts, columns for rough finished surface of concrete complete all as specified and as directed.

M&L mild steel TMT bars 8mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to complete all as specified and as directed.

~Ditto~ all as per above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M & L for providing precast cement concrete (reinforced)Type B1, 1 : 2 : 4 (20mm graded aggregate) set in cement mortar 1 : 6, in landings, for RCC cover slabs factory made for drains cover with plain faces complete all as specified and directed.

M&L providing cement concrete 1:2:4 of type B0 using 12.5 mm graded stone aggregate 40mm thick as in damp proof course to horizontal or slapping or vertical incl. necessary form work and applying evenly a coat of blown type bitumen at the rate of 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete all as specified and as directed.

M&L precast cement concrete Block Masonary with soilid blocks type C1 1:3:6 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .

M & L for 5 mm thick rendering on fair faces of brick work or concrete surfaces on walls and neeru finishing to plastering with cement mortar 1:4 complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls with cement mortar 1:4 finished even and fair complete all as specified and directed.

M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 mixed with water proofing compound as per manufacturer instruction, finished even and smooth ( w/o using extra cement) complete all as specified and directed. (Note:- WPC shall be measured and paid separately)

M & L for 15 mm thick cement plaster on otherthan fair faces of brick work or concrete surface on wall in CM 1:6 finished even and smooth ( w/o using extra cement) complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection finished even and smooth ( w/o using extra cement) complete all as specified and directed

M&L for 15mm thick screed bed in CM 1:4 mixed with water proofing compound as per manufacturer instruction , finishing the surface should be even and fair with out using extra cement , complete all as specified and directed. (Note:- WPC shall be measured and paid separately)

Supply only Liquid water proofing compound, complete all as specified and directed.

Supply only water proofing compound, complete all as specified and directed.

M & L for GI wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joists etc in walls, ceilings, beams etc including all laps, cutting and waste complete all as specified and as directed.

M&L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface of broken bricks aggregate,complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.

M&L PCC 25mm thick 1:2:4 of type B-1 using 20mm graded stone aggregate as in floors complete all as specified and as directed.

M & L for PCC 50mm thick 1:2:4 of type B-1 using 20mm graded stone aggregate as in floors and finishing the surface even and smooth w/o using extra cement and spike rolling to surface or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement complete all as specified and as directed.

Forming construction joints 30mm deep x10mm wide filled with sealing compound grade "A" complete all as specified and as directed.

M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels and drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms , moulds ,mitred stopped ends etc.

M & L for providing cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate, as in coping ,bed blocks including necessary form work complete all as specified and directed

M&L for Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match the shade of tile complete all as specified and as directed.

~Ditto~ all as per item but on vertical surfaces over 10 mm thick rendering in CM 1:4 complete.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match the shade of tile complete all as specified and as directed.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match the shade of tile complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry over and including 10 mm thick rendering in CM 1:4 and pointed in white or coloured cement to match the shade of tile complete all as specified and as directed.

M&L for Non - skid tiles exterior grade, chequered / grooved pattern of size 300x300mm / 400x400mm 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

S&F steel window with side hung shutter including projecting type hinges with steel handle, tower bolt and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel window with side hung shutter including projecting type hinges with steel handle, and steel peg stay, tower bolt complete without glazing bars, dovetailed or welded complete all as specified and directed.

S & F M.S. Framed work such as grills grating etc. with ends of bars sholdered and / or riveted into spikes, framed guard bars / railings complete all as specified and as directed.

S & F steel ventilators with top hung shutters including hinges, steel handle and steel peg stay complete with glazing sash, dovetailed or welded complete all as specified and as directed.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 28 mm dia fancy type wooden finish MS dropery rod fixed with wooden finale stop, brackets etc to wall complete as sample approved complete all as specified and as directed.

M&L for three coats of white wash on ceiling / Chhajja (undecorated) surfaces including preparing of surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of alkali resistant primer over and incl.1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of new (Previously untreated) plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer on walls, complete all as specified and directed.

M & L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm 1 mm thick wall care putty complete all as specified

M&L for water proofing treatment to roofs surfaces including a coat of cold applied bituminous shalitex primer @ 0.30 Lit per sqm evenly on roof surface and a coat of hot blown bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3.0 Kg/Sqm) unrolled and bonded completely to the substrate with side over lap of 75 mm & end over lap of 100 mm and then scaled/ fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm shall be applied on top of APP modified polymeric membrane as per manufacture instruction and finally it will be finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm, complete all as specified and as directed.

S&F for CP health faucet (hand shower) with 1.5 m long , SS flexible tube and wall hook complete all as specified and directed

S&F 125 mm CP brass shower rose for fixing with 15mm pipe complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe but incl waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl urinal spreader, flush pipe, grating (if any) and Union for discharge pipe complete all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with aluminium alloy brackets and guard and railing 60cm long complete all as specified and as directed.

S & F vitreous china hand wash basin white oval shaped exclusive quality, fixing over granite counter incl PVC waste pipe, and waste coupling fixed complete all as specified and directed.

M & L for granite (of any type) work (table rubbed and polished) 16-18 mm thick in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed of CM (1:6) complte all as specified and as directed.

M & L for granite (of any type) work (table rubbed and polished) 16-18 mm thick for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed.

S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F viterous china urinal partition white of size 310x750mm complete all as specified and directed.

S&F viterous China wash down water closet (pedestal pattern) complete, incl toilet paper holder, Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, health faucet jet (excluding flushing cistern and flushing pipe) complete all as specified and directed.

S&F 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle complete all as specified and directed.

S&F 500 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball connections complete all as specified and directed.

S&F 600mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S&F 15 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

~Ditto~ all as per above item but 20 mm bore

Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades, shelves , lintels, etc and cutting chases for concealed water tubing and making good , cutting n'exc 10 cm girth complete all as specified and directed.

S&F 15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor including taking down complete all as specified and directed.

S&F 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor including taking down complete all as specified and directed.

S&F 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F CP brass wall mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm bore dai of pipe complete all as specified and directed.

S&F CP Brass central hole basion mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm bore dai complete all as specified and directed.

S&F 15 mm bore fancy type, CP Brass Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F 15mm bore fancy type two way CP Brass Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F pressed steel frames of size 125x60mm (using PBI sheet 1.25 mm thick) for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc Including cement concrete 1:3:6 type C-0 (using 12.5mm graded stone aggregate) as for filling in door frames and including cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) for fixing of hold fast complete, as specified and as directed.

S & F pressed steel frames of size 105x60mm (using PBI sheet 1.25 mm thick) for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc Including cement concrete 1:3:6 type C-0 (using 12.5mm graded stone aggregate) as for filling in door frames and including cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) for fixing of hold fast complete as specified and as directed.

S & F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 30 mm thick IInd class hard wood glazed skelton shutters open rebated and prepaired to recive glass,guage etc (W/o sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of sutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat.

S&F factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PCV ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cementsuppling & fixing in the frame at site as per specification & drawings complete all as specified and directed.

M & L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M & L for 19mm prelaminated particle board, exterrior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with teak wooden laping 6mm thick around off shutter with screws to timber/iron frame work and including 03 Nos S S hings, 02 Nos SS Fancy handle, 02 Nos S S tower bolt, ball catches with 8mm dia steel ball and brass body and striding plate including letting and in built locking divice with Key etc for Cup Board as per specification complete all as specified and as directed Engr-in-Charge.

S & F Butt hinges 100mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised complete all as specified and as directed.

S&F 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, ccomplete all as specified and directed.

S&F mild steel barrel tower bolt of size 200mm stove enamalled black with bright bolt and fixed complete all as specified and directed.

S&F Mild steel sliding door bolt of size 300mm plate type stove enamelled black with bright not lessthan 12mm dia with and including minimum of 6 bolts and nuts four on plate and two on staples plat and fixed complete all as specified and directed.

S & F 250mm aluminium anodised sliding door bolt of extruded section all as specified

S&F mild steel pressed handle oval type stove enamalled black size-150mm complete all as specified and directed.

S&F Extruded aluminium alloy handles, fabricated type, anodised size-150mm complete all as specified and directed.

S&F Brass chromium plated Tubular towel rail , 20mm dia, D type , 60cm long between falnges complete all as specified and directed.

S&F of PVC (SWR) vent cowls of 75mm bore complete all as specified and directed.

S&F PVC (SWR) reducer 110 mm complete all as specified and directed.

S&F 150mm bore Reinforced concrete pipes,class NP3,laid in trenches and jointed with collars in cement and sand mortar 1:1 complete all as specified and directed. (Note:-Excavation & earth work shall be measured and paid separately)

M&L for concrete (1:3:6 type C2) bed to drain pipes for 150 mm including packing under and haunching against the sides of pipes with concrete after they are laid and tested complete all as specified and directed.

S&F aluminium peg sets of 6 pegs complete all as specified and directed.

S&F Anodised aluminium frame powder coated (min thickness of coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Anodised aluminium window and ventilator shutters, powder coated (min thickness of coating 50 micron) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F Anodised aluminium window and ventilator shutters powder coated (min thickness of coating 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S & F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square nexc. 0.5 sqm in each pane complete all as specified and directed.

~Ditto~,all as per above but exc 0.5 sq. m in each pane

Demolition of concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 100 mm thick PCC 1:3:6 type -C2 using 40 mm graded stone aggregate as in floors etc, finished rough to receive floor finishes complete all as specified and directed.

Cleaning of blockage of weep holes of any type or any size in retaining walls by way of rodding and removal / clearing of mud, vegetation growth with rodding up to extreme end and making good the shape and size of weep hole with cement mortar in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Demolition of Brickwork or stone/ boulder masonry, built in CM including all quoins, arches, pillars, etc, but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for providing precast cement concrete bonders (for stone walling) type B1 (1:2:4) using 20 mm graded stone aggregate, set in cm 1:6 complete all as specified and directed.

M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed.

M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed.

Hand packing (any thickness) at back of walls with broken stone or boulders and raising (or lowering) to the required level complete all as specified and directed.

~ Ditto~ all as per item above but except materials.

Raking out joints/pointing built in cement mortar to random rubble or polygonal rubble uncoursed or brought up to courses, washing the joints and removing rubbish off the premises.

M&L for raised pointing to random polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed.

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS-1161(1979) grade St-240 complete all as specified and directed.

S & F MS bands, straps, supports or stays of rainwater, clamps, hold fasts, wall ties, plain angle cleat for securing purlind plate washer and other similar small steel article confirming to Fe-290 Grade E-165 with and including necessary nut-bolts, washers, screws etc. as required complete all as specified and directed.

M&L for point wiring Concealed type with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC surface / concealed conduit 20 mm or higher dia, light grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for the following :-

(a) One light point/ fan/ exhaust fan point/bell point controlled by one, one way switch of 5/6 Amps.

(b). One 3 pin socket outlet 5 Amp on same board with other switch

(c) One 3 pin 5/6 amps socket out-let point on independent board controlled by one, one way switch of 5/6 amps on independent board.

~Ditto~ all as per item 143 above but with 2.5 Sq mm cable (FRLS) for one 15 Amp socket outlet controlled by one switch on independent board and 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete all as specified and directed

Material & labour for flameprof of point wiring 1.5 Sqmm PVC unsheathed fire resistance cable of copper conductor multistandard ISI marked single core FRLS 1100 V grade in and including suitable size of stove enameled ERW steel conduit ISI marked conduit along with Flame proof accessories such as junction boxes, Inspection cover, Flameproof glands, Concealed/surface type stone/brick masonry walls, roofs, floors etc and providing grouting of nuts bolts for fixing of flame proof switches sockets etc. including provision of 1.5mm FRLS PVC copper conductor earth continuty and connecting to common earth dolly complete all as specified and directed (a) One light point controlled by one flame proof one way switch complete.

Supply and fixing LED light fitting 1 x 16 watt flame proof, CMRI certified recommended for gas/ vapo rgroup of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size including necessary fixing arrangement CMRI approved and connecting up completely all as per IS-2148 complete all as specified and directed

S/F Flame proof rotary switch of cast iron body SP 16 Amps for ON/OFF light points to operate on single phase,LM6, 16A, single pole 250V AC CMRI certified IS- 2149 complete all as specified and directed

S & F Switch piano, flush type, white finish, 5/6 amps, single pole, one way.

Supply and Fix Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps flush type, complete all as specified and directed.

S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

S&F lamp holder, insulated body with back plate suitable for batten /angular fittings, fixed on with & including round block 8 cm dia, 4 cm depth, closed recessed type & making connection etc complete all as specified & directed.

S&F Switch piano flush type, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.

S&F Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), flush type, non shutters, non inter locking type, complete all as specified and directed.

Supply and fix of LED Integrated Batten T5 box type surface mouted, (1x18 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed.

Supply and fix of LED Integrated Batten T5 box type surface mouted, (1x9 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed

Supply and Fix in of LED 9 W bulb complete all as specified and directed.

Supply and Fix of 1x20 watt LED security light fitting , pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with two core copper flexible wire of 0.50 Sqmm complete all as specified and directed

M & L for earthing complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in earth plate No 3 of MES schedule 2009 part–I connected to earthing test point including earth continuity conductor and loop earthing etc. as required 4 mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4 type B1 & pit cover 75mm thck in RCC 1:2:4 type B1 dully reinforced with 6mm dia bar @ 150 c/c both ways including with lifting handle and Earth lead and GI protection pipe light grade 15 mm dia beyond 7.5 mtr from electrode to earth terminal point /main switch board and 20mm bore GI watering pipe medium grade etc. complete all as specified and directed.

Supply and Fix of MCB DB sheet metal enclosure for DB, TPN, 4 way having protection with 200 amps rated bus bar, 440 volts, double door, including grauting suitable for housing MCB's and isolators, complete all as specified and directed.

Supply and Fix of MCB DB sheet metal enclosure for DB, SPN, 8 way having protection with 200 amps rated bus bar, 440 volts, double door, including grauting suitable for housing MCB's and isolators, complete all as specified and directed.

Supply and Fix of MCB single pole, 240 volts, 6-32 Amps of 10 KA,C Curve complete all as specified and directed.

Supply and Fix of MCB single pole & Neutral 240 volts, 40 amps, of 10 KA complete all as specified and directed.

Supply and Fix of MCB Triple pole & Neutral 240 volts, 63 amps, of 10 KA complete all as specified and directed.

Material & Labour for sub main wiring with 1100 volts grade PVC insulated and unsheathed cable with stranded copper conductor 2x6 Sqmm, of code Red for Phase,Black For Neutral & Green For Earth concealed in wall and drawn including PVC conduit along with 6 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.

Supply and fixing of exhust fan AC single phase 230/240V OF size 300 mm sweep with louvrs complete all as specified and directed.

S&F Electronic fan regulator flush type, 300 W Step type, 230 volts ISI marked complete all as specified and directed.

Supply & fix fans ceiling complete with accessories 230 V,1200 mm sweep & (BEE 5 star rated) complete all as specified and directed.

Supply and fix Water heater storage type, electric,capacity 25 litres (BEE 5 star rated) with grouting with four nuts and bolts complete with all assessories and chromium plated flexible two number pipe connection for hot / cold water supply

Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with onesingle pole MCB of 20 amp all as specified and directed.

Supply and laying of XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 4 core x 16 Sqmm including testing and commissioning complete all as specified and directed.

M&L for laying well burnt bricks,as in protection of cable laid dry, flat aboutting each other wide wise complete all as specified and directed. .

M&L for GI tubing 40 mm dia light grade for cable protection complete all as specified and directed.

Supply and Installation of Solar water heating system ,Flat plate collector type ,with heat exchanger of 200 litre per day capacity ,with electrical heating back up complete all as specified and directed .

Supply and fix PVC tank 250 Ltr cap for cold water make up tank for solar water heater complete all as specified and directed .

Supply and Installation of Solar water heating system ,Flat plate collector type ,with heat exchanger of 1000 litre per day capacity ,with electrical heating back up complete all as specified and directed .

Supply and fix PVC tank 1000 Ltr cap for cold water make up tank for solar water heater complete all as specified and directed .

M & L Brass Float valve heavy duty 25 mm complete all as specified and directed .

S&F sheet metal enclouser MCB DB SPN 2 way 240 volts with one No. MCB SPN 20 Amps, 'C' curve type having rupturing capacity 10KA and making electrical connections complete all as specified and directed.

Material and Labour of 25 mm dia bore GI tubing medium grade complete with all fittings laid in trenches/ walls all as specified and directed.

M&L For cutting of existing pipe and making threading and sutable work work for connection for pipe all as specified and directed by Engr-in-charge

S&F Gun-metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, ISI marked, complete all as specified and directed for 25 mm bores of pipe complete all as specified and directed.

M & L MS work ie angle iron or flat iron of any size for making stand for water make up tank including cutting bending drilling holes in hot or cold including painting two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed.

M&L for GI pipe medium grade size15 mm dia with all fittings, fixed complete to walls and ceiling or laid in floor insulated with best quality of insulating material/glass wool duly binded with chicken wire mesh and covered with aluminium cladding duly clamp complete all as specified and directed

~ Ditto~ all as per item above but size 20 mm dia

M/s Rana Enterprises

M/s J P Traders