Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.2 LAccepted-AOC | ₹3.2 L | L1 | Accepted-AOC L1 Agency |
| 2 | L2₹3.2 L+₹4,002.73 (1.25%)Rejected-Finance | ₹3.2 L+₹4,002.73 (1.25%) | L2 | Rejected-Finance Higher |
| 3 | L3₹3.2 L+₹4,472.33 (1.40%)Rejected-Finance | ₹3.2 L+₹4,472.33 (1.40%) | L3 | Rejected-Finance Higher |
| 4 | L4₹3.3 L+₹5,992.92 (1.87%)Rejected-Finance FAKIRTILLA SILCHAR CACHAR ASSAM 788010 | SILCHAR | CACHAR | ASSAM | 788010 | ₹3.3 L+₹5,992.92 (1.87%) | L4 | Rejected-Finance Higher |
| 5 | L5₹3.3 L+₹12,298.90 (3.85%)Rejected-Finance VILL AND P O BERENGA PT II PS SILCHAR DIST CACHAR ASSAM PIN 788005 | SILCHAR | CACHAR | ASSAM | 788005 | ₹3.3 L+₹12,298.90 (3.85%) | L5 | Rejected-Finance Higher |
Tender Value
₹2.2 L
Closing Date
12 May 2026, 2:00 pmClosed
Registrar NIT Silchar
Registrar NIT Silchar
Providing Aluminium Partition and Allied Works for Creating Reading Room in GH3 at NIT Silchar.
2026_NS_907501_1
NIT/Estate/Limited/2026-27/01 Sl. No. 05
Limited
Civil Works
Percentage
NIT Silchar
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
Exempted
31 Aug 2026
6 May 2026
13 May 2026
6 May 2026
12 May 2026
6 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion- Powder coated aluminium (minimum thickness of powder coating 50 micron) | 245 | Kg | 552.14 | ₹1,35,273.32 |
| 2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) ::For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)- Powder coated aluminium (minimum thickness of powder coating 50 micron) | 30 | Kg | 659.83 | ₹19,794.84 |
| 3 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge. Pre-laminated particle board with decorative lamination on both sides | 17.33 | Sqm | 1,160.02 | ₹20,103.08 |
| 4 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . | 17.33 | Sqm | 1,223.87 | ₹21,209.7 |
| 5 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm | 4 | Each | 119.76 | ₹479.02 |
| 6 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm | 2 | Each | 271.02 | ₹542.05 |
| 7 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm | 4 | Each | 68.9 | ₹275.6 |
| 8 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper | 2 | Each | 41.18 | ₹82.37 |
| 9 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
In cement mortar | 0.5 | cum | 2,142.61 | ₹1,071.3 |
| 10 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 0.5 | SQM | 1,318.67 | ₹659.33 |
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 6.72 MB
Termsconditions.pdf
Additional Documents • 1.15 MB
BOQ_953836.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .