ANNUAL RATE CONTRACT FOR CIVIL MAINTAINANCE AND REPAIRING WORK OF SARTHANA NATURE PARK IN NEW EAST (SARTHANA) ZONE , SURAT.

NAME OF WORK :- ANNUAL RATE CONTRACT FOR CIVIL MAINTAINANCE AND REPAIRING WORK OF

SARTHANA NATURE PARK IN NEW EAST (SARTHANA) ZONE , SURAT.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

PART- A CIVIL WORKS

Dismentling steel work including distempering and stacking

the maerials with all lead and lift.

Demolition including stacking of serviceable materials and

2 disposal of unserviceable materials with all lead & lift.

(i) RCC work 50.00 1057.47 C.M.

Demolition of brick work and stone masonary including

stacking of serviceable materials and disposal of

unserviceable materials with all lead & lift.

(II) on Cement mortar. 50.00 550.40 C.M.

Removing the scraping of old deteriosted plaster of any

thickness from wall/R.C.C. member including stacking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift.

Dismentalling tiled of stone floors laid in mortar including

5 stacking of serviceable materials and disposal of 10.00 47.72 S.M.

unserviceable materials with all lead & lift.

Kota stone flooring and steps 10.00 47.72 S.M.

Marble 10.00 47.72 S.M.

Tiles flooring / Dedo 10.00 47.72 S.M.

Granite flooring and steps 10.00 47.72 S.M.

Dismantling doors windows ventilators etc. (wood or steel)

shutters including chowkhats, Architraves, holdfasts and

other attachment etc. comp. and stacking them within all lead

& lift. (I) not exceeding 3 sq.m. in area.

Dismantling sanitary fittings like wash basin, w.c. pan Indian

7 and Europeans type, flushing tank etc. including stacking the 5.00 405.65 No.

materials with all lead & lift.

Dismentling C.I. pipes G.S.W. pipes and A.C. rain water

8 pipes with fittings and clamps including stacking the 5.00 74.77 R.M

materials with all lead and lift. (for any dia, of pipe)

Dismentaling of sheet roofing inlcuding ridges, Hips,

Valleys,Gutters etc. stacking of serviceable materials and

disposal of unserviceable materials with all lead and lift. (i)

G.I. sheet roofing.

Removing of Collapsible Gate 1.00 1500.00 No.

Removing of Rolling Shutter 1.00 1000.00 EACH

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Dismentling barbed wire in fencing including making rolls

and also including dismentling fencing posts including all

earth work concrete in base and making good the disturbed

10 fround 10.00 66.81 R.M

stacking useful materials as directed and disposing as

directed and disposing of the unserviceable materials with all

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ

11 piles) & disposal of the surplus excavated soil as directed

within a lead of 50 M. For following diameter of piles.

Excavation for foundation includ.sorting out & stacking of

useful materials & disposing of the excavated stuff upto

12 mt. Lead & all lift, watering etc Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

(A) Loose or Soft soil

(1) Up to 1.5 Mt. depth 30.00 117.26 C.M.

Executed With Manual Labour

(A) Loose or Soft soil

(1) Up to 1.5 Mt. depth 30.00 203.83 C.M.

Providing & Laying C.C 1:5:10 (1cement :5coarse sand :10

13 graded stone agg.40 m.m Nominal size )& curing comp. excl. 5.00 2517.44 C.M.

cost of from work in :Foundation & Plinth

Providing & laying cement concrete 1:4:8 (1 cement:4 sand:8

graded stone agg. 40 mm nominal size) & curing comp.

incl.cost of form work in (A) Foundation and Plinth

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

15 Crushed stone agg 20m.m Nominal size)&curing comp. excl. 10.00 3005.76 C.M.

cost of form work in :(a) foundation & Plinth

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5

sand:3 graded stone agg. 20 mm nominal size)& curing comp.

Includ.cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in : (A) Foundation,footing,Base

of columns and Mass concrete.

Providing & laying ordinary cement con.1:1.5:3

(1cement:1.5sand: 3 graded stone agg. 20 mm nominal size)

17 finishing smooth curing etc. comp. Incld. Cost of form work

but excl. Cost of reinforcement for R.C.C. Work in : Up to

(1)Having c/s area up to 0.08 sq.mt 5.00 12632.60 C.M.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 9201.68 C.M.

(1)Having c/s area up to 0.08 sq.mt 5.00 9102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 7086.88 C.M.

Providing & fixing IS Mark TMT Bar FE 500D

18 reinforcement for R.C.C. work incl. bending, binding & 500.00 76.21 Kg.

placing in position etc. comp. Upto G.L./P.L.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(C) Fly Ash Bricks

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding

cm. in depth consolidating each disposited layer by ramming

Filling in foundation and plinth with murrum or selected soil

21 in layers of 20cm. thickness including watering, ramming and 50.00 289.06 C.M.

consolidating etc. complete.

20mm thick sand faced cement plaster on walls upto height

10 metres above ground level consisting of 12mm thick

22 backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick 200.00 330.88 S.M.

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing & laying ordinary cement

con.1:1.5:3(1cement:1.5sand:3 graded graded stone agg.

mm nominal size) finishing smooth curing etc. comp. Incl..

Cost of form work but excl. Cost of reinforcement for R.C.C.

(1) Having c/s area up to 0.080 sq.mt Ground Floor 5.00 12632.60 C.M.

First Floor 0.00 12672.24 C.M.

Second Floor 0.00 12711.88 C.M.

Terrace (third) Floor 0.00 12751.53 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto

sq.mt Ground Floor

First Floor 0.00 11206.61 C.M.

Second Floor 0.00 11246.25 C.M.

Terrace (third) Floor 0.00 11285.89 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

First Floor 0.00 9241.32 C.M.

Second Floor 0.00 9280.76 C.M.

Terrace (third) Floor 0.00 9320.61 C.M.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

(1) Having c/s area up to 0.080 sq.mt Ground Floor 5.00 9102.61 C.M.

First Floor 0.00 9142.25 C.M.

Second Floor 0.00 9181.89 C.M.

Terrace (third) Floor 0.00 9221.53 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto

sq.mt Ground Floor

First Floor 0.00 8214.05 C.M.

Second Floor 0.00 8253.69 C.M.

Terrace (third) Floor 0.00 8293.33 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

First Floor 0.00 7126.52 C.M.

Second Floor 0.00 7166.16 C.M.

Terrace (third) Floor 0.00 7205.81 C.M.

(2) Slabs having more than 8cm. and upto 10 cm. Th'.

First Floor 0.00 8024.06 C.M.

Second Floor 0.00 8063.70 C.M.

Terrace (third) Floor 0.00 8103.34 C.M.

(3) Slabs having more than 10 cm. & upto 13 cm. Th'.

First Floor 0.00 7436.60 C.M.

Second Floor 0.00 7476.24 C.M.

Terrace (third) Floor 0.00 7515.89 C.M.

(4) Slabs having more than 13 cm. Thickness Ground Floor

First Floor 0.00 6852.65 C.M.

Second Floor 0.00 6892.29 C.M.

Terrace (third) Floor 0.00 6931.94 C.M.

Ground Floor 2.00 9531.24 C.M.

First Floor 0.00 9570.88 C.M.

Second Floor 0.00 9610.53 C.M.

Terrace (third) Floor 0.00 9650.17 C.M.

Ground Floor 2.00 5512.83 C.M.

First Floor 0.00 5552.47 C.M.

Second Floor 0.00 5592.11 C.M.

Terrace (third) Floor 0.00 5631.76 C.M.

Providing & laying ordinary cement

con.1:1.5:3(1cement:1.5sand:3 graded graded stone agg.

24 mm nominal size) finishing smooth curing etc. comp. Incl..

Cost of form work but excl. Cost of reinforcement for R.C.C.

(A) Stair cases including landings etc

Ground Floor 2.00 7380.20 C.M.

First Floor 0.00 7419.85 C.M.

Second Floor 0.00 7459.49 C.M.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Terrace (third) Floor 0.00 7499.13 C.M.

(B) Vertical and horizontal fins

Ground Floor 5.00 10831.75 C.M.

First Floor 0.00 10871.40 C.M.

Second Floor 0.00 10911.04 C.M.

Terrace (third) Floor 0.00 10950.68 C.M.

Providing & laying cement concrete 1:2:4 (1 cement:2

sand:4 graded stone agg. 20 mm nominal size)& curing comp.

Includ.cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in : (A) Foundation, footing, Base

of columns and Mass concrete.

Providing & laying ordinary cement con.1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal

26 size) finishing smooth curing etc. comp. Incld. Cost of form

work but excl. Cost of reinforcement for R.C.C. Work in :

(1)Having c/s area up to 0.08 sq.mt 2.00 12123.79 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 8692.87 C.M.

(1)Having c/s area up to 0.08 sq.mt 2.00 8593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 6578.07 C.M.

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

27 crushed stone agg. 20 m.m Nominal size)& curing comp. incl. 10.00 3982.62 C.M.

cost of from work in: wall caps/ copings.

Providing & fixing IS Mark TMT Bar FE 500d reinforcement

28 for R.C.C. work incl. bending, binding & placing in position

etc.comp.---Ground Floor

Ground Floor 500.00 76.21 Kg.

First Floor 0.00 77.21 Kg.

Second Floor 0.00 78.21 Kg.

Terrace (third) Floor 0.00 79.21 Kg.

Brick work using common burnt clay building bricks having

29 crushing strength not less than 35 kg./Sq.Cm. in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground Floor 10.00 4511.97 C.M.

First Floor 2.00 4786.95 C.M.

Second Floor 0.00 5061.92 C.M.

Terrace (third) Floor 0.00 5379.24 C.M.

Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (C)Fly Ash Bricks

Ground Floor 10.00 678.86 S.M.

First Floor 0.00 631.79 S.M.

Second Floor 0.00 638.04 S.M.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Terrace (third) Floor 0.00 644.29 S.M.

Uncoursed rubble masonary with hard stone of approved

quality in foundations and plinth in cement mortar 1:6 (1

Cement : 6 sand) including leveling up etc. complete.

Pointing on Coursed stone masonary with cement mortar

1:3 (1 cement : 3 Sand)

(A) Flush Pointing 50.00 97.04 S.M.

(B) Ruled Pointing 25.00 100.22 S.M.

Pointing on Uncoursed stone masonary with cement mortar

1:3 (1 cement : 3 Sand) ---

(A) Flush Pointing 25.00 104.99 S.M.

(B) Ruled Pointing 25.00 108.81 S.M.

Providing Rubble Pitching with hard stone of approved

quality in cement mortar 1:6 (1 Cement : 6 Coarse sand)

including leveling up ,Curing etc. complete excluding

Providing and filling rubbles including hand packing and

35 filling interstices with quarry spalls behind abutments and 1.00 1064.80 C.M.

between returns as directed.

Providing upto floor two level precast cement concrete jali or

grill 1:2:4 mix (1-Cement : 2- coarse sand : 4-graded stone

aggregate 6mm nominal size) reinforced with 1.6 mm dia.

36 Mild steel wire including roughening,cleaning, fixing and

finishing in cement mortar 1:3 and curing complete. (B)

Ground Floor 10.00 706.60 S.M.

First Floor 0.00 716.63 S.M.

Second Floor 0.00 726.65 S.M.

Terrace (third) Floor 0.00 736.68 S.M.

Providing & Applying 10mm.th.cement plaster in single coat

on brick/ concrete walls similar surfaces for plastering &

finished even & smooth with a floating coat of cement slurry

mixed with admixture of lime or neeru in required proportion

etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall and

similar surfaces

Ground Floor 100.00 189.79 S.M.

First Floor 30.00 217.93 S.M.

Second Floor 0.00 246.07 S.M.

Terrace (third) Floor 0.00 274.20 S.M.

(B) For ceilings & soffits of stairs

Ground Floor 50.00 214.60 S.M.

First Floor 30.00 242.74 S.M.

Second Floor 0.00 270.88 S.M.

Terrace (third) Floor 0.00 299.02 S.M.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing & Applying 15mm.th.cement plaster in single

coat on brick/ concrete walls similar surfaces for plastering

& finished even & smooth with a floating coat of cement

38 slurry mixed with admixture of lime or neeru in required 20.00 237.51 S.M.

proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A)

For wall and similar surfaces -- Ground Floor

20mm thick sand faced cement plaster on walls for height

more than 10 metres above ground level consisting of 12mm

39 thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm 50.00 330.88 S.M.

thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

Providing & Applying 20mm. Th. Heavy Roller plaster on

walls or similar surfaces at all floor levels consisting of

mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) &

40 mm. th. Finishing coat of C.M. 1:1 (1 cement: 1 sand) apply 100.00 324.00 SM

thick cement slurry and apply roller horizontal as well as

vartical ( two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge.

Providing 20 mm thick double coat mala cement plaster on

brick / concrete work for plastering comprising of base

coat 12 mm thick cement plaster in cement mortar (1

41 Cement : 4 coarse sand) in rough finishing and 8 mm thick 50.00 272.48 S.M.

top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing etc.

Providing throating or plaster drip and moulding it to

R.C.C. chajja etc. comp.. For all floor

Providing 20 mm deep finished groove in plaster in line and

level etc. Comp. For all Floor (M.R.)

Providing and fixing 150 mm wide, approved quality chicken

wire mesh (FRP / PVC)at junction of brick work and RCC

work or two dissimilar surfaces, at all heights fixed by nails,

rowal plugs or tag by cement mortar 1:3 before applying the

plaster, including curing, scaffolding all complete as directed.

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement :

6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)

laid over and jointed with grey cement slurry mixed with

pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick in

risers of steps,skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed

with gray cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc.complete.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing & Laying white glazed tiles 6mm. th. of Orient,

Kajaria, Jhonson,Nitco,Somani ,Bell make at all floor levels,

47 in flooring, treads of steps & landings laid on a bed of 12 50.00 857.42 S.M.

mm. Av. Th.C.M.1:3(1cement :3 sand) finished with flush

pointing in white cement etc.com. For all floors

Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria, Jhonson,Nitco,Somani,Bell make at all floor levels in

skirting risers of steps & dado on 10 mm. th.

C.M.1:3(1cement :3 sand) including necessary cement paste

for fixing and joined with white cement slurry etc. complete.

Providing and laying Ceramic tiles 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement.

Providing and laying Ceramic tiles 6mm thick in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

Providing & laying marble stone slab flooring over 20 mm.av.

base of C.M.1:6 ( 1 cement :6 coarse sand ) & jointed with

grey cement slurry incl. rubbing & polishing comp.(A)

Marble slab 25 mm. Thick.

Providing & laying granite slab 18mm thick in flooring,

treads of steps and landing laid on bed of 20mm thick cement

mortar 1:6 (1 Cement : 6 coarse sand) or lime mortar 1:1.5

laid and finished with flush pointing in white or colour

cement including rubbing and polishing complete. ( Basic

Rate:- Rs.1347.46/S.M.)

Providing & laying granite slab 18mm thick in skirting, risers

of steps, dedo and pillars laid on 10mm thick cement mortar

53 1:4 (1 Cement : 4 Coarse sand) and finished with flush 10.00 2449.00 S.M.

pointing in white or colour cement including rubbing &

polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

Providing & laying granite slab 18mm thick in Window-Door

seal Frame Etc laid on 10mm thick cement mortar 1:4 (1

Cement : 4 Coarse sand) with nessary adhesive material and

finished with flush pointing in white or colour cement,

including rubbing & polishing comp.. (Basic Rate:-

55 Labour Charges For Half Round Edge For Granite 10.00 150.00 R.M.

56 Labour Charges For Quater Round Edge For Granite 10.00 90.00 R.M.

57 Labour Charges For Edge Finished For Granite 50.00 43.43 R.M.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads of steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1 Cement : 6 Coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and jointed with colour cement slurry including finished with

flush pointing & cleaning the

surface etc. comp.Size 24" x 24"

For Antiskid tiles

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x

24" in flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1 cement : 3 coarse sand)

finishing with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x

24" in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1 cement : 3 coarse sand) and jointed with white

Providing and laying chequered precast concrete tiles

22mm thick with aggregate of sizes upto 6mm in floors

treads of steps and landing on 20mm thick bed of C.M. 1:6 (1

cement : 6 sand) or L.M. 1:1.5 (1 Lime putty : 1.5 sand)

jointed with neat cement slurry with pigments to match the

shade of the tiles.

Providing and constructing sandwitch type Polish Kota

Stone cooking platform 0.6 mt. wide & 0.75 mt. height,

including one end side Polish Kota stone (Double Polish) of

1.25 mt. height & front Polish Kota stone patti of 10 cm wide,

vertical partitions of half B.M. wall in C.M. 1:4 and 10mm th.

62 plaster in 1:3 with finishing smooth with cement slurry as 20.00 3010.00 R.M.

required and Stainless Steel sink of 0.45 mt x 0.45 mt size of

approved quality and make with required all fitings &

fixitures etc. comp as per instruction given by site in charge at

Providing and constructing sandwitch type Granite stone

cooking platform 0.6 mt. wide & 0.75 mt. height, including

one end side granite stone (Double Polish) of 1.25 mt. height

& front granite stone patti of 10 cm wide, vertical

partitions of half B.M. wall in C.M. 1:4 and 10mm th.

63 plaster in 1:3 with finishing smooth with cement slurry 10.00 3128.00 Rmt.

as required and Stainless Steel sink of 0.45 mt x 0.45 mt

size of approved quality and make with required all fitings &

fixitures etc. comp as per instruction given by site in

charge at all floors. (Basic rate of Granite Rs.1,200.00 /

Providing & fixing at all floor levels,both face polished

machine cut edge green kota stone slab (30mm) for urinal

partition joined with grey cement slurry (1:1) incl. Rubbing

& polishing etc. complete. (M.R.)

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing & fixing at all floor levels,both face polished

machine cut edge Marble slab for urinal partition joined

with grey/White cement slurry (1:1) incl. Rubbing &

polishing etc. complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

Providing and laying rough chiseled dressed stone flooring

over 20mm thick base of cement mortar 1:5 (1 cement :

66 coarse sand) or L.M. 1:1.5 including pointing with cement 5.00 549.47 S.M.

mortar 1:2 (1 cement : 2 stone dust) etc. (A) 25mm thick

Providing and laying broken china mosaic flooring for terrace

using 12mm to 20mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be

67 tempered to bring mortar creme out upto surface using 25.00 747.29 Sqm.

white cement including rounding off junctions and extending

them upto 15 cm along the wall clearing with water and

oxalic acid etc. as directed.

Providing & fixing 35mm.th. Flush Door Solid Double

Core type Both Face water proof Ply Vennered & 1.5 mm

th.laminate shall be pasted on both side with adhesives as

specified by the manufacturers. The laminate shall be as per

approved shade & texture, of make incl. Sal wood frames of

finished size 12cm x 7cm.incl. S.S. Hinges with nessary

screws & Anodized aluminum fixtures & fastenings For all

Same as Above But Without Frame 5.00 2520.00 S.M.

Providing & fixing 35mm.th. Indian teak wood shutters for

doors, windows & clearstory windows incl. Indian teak

wood frames of finished size 12cm x 7cm.incl. anodized

aluminum fixtures & fastenings incl. Primer coat of approved

quality & two coats of oil painting etc. For all Floor

(A) Fully Panelled 0.00 5533.68 S.M.

(B) Partly Panelled and Partely Galzed 0.00 5185.03 S.M.

(C) Fully Galzed 0.00 4551.69 S.M.

Providing and fixing 35mm thick shutters for Doors,

windows and clearstory windows including anodised

alluminium butt hinges with necessary screws.

(A) Indian teak wood. (i) Fully Panelled.

Providing and Replace door, Window S.S. Fixtures fix in

wooden / Alluminium door - window

(A) S.S. Stopper 60 Cm long of ASIS 304 2.00 363.77 No.

(B) S.S. Stopper 30 Cm long of ASIS 304 2.00 182.32 No.

(C) S.S. Stopper 20 Cm long of ASIS 304 2.00 127.53 No.

(D) S.S. Aldrop 20 Cm long of ASIS 304 Grade 2.00 218.26 No.

(E) S.S. Aldrop 25 Cm long of ASIS 304 Grade 2.00 327.83 No.

(F) S.S. Aldrop 30 Cm long of ASIS 304 Grade 2.00 400.58 No.

(G) S.S. Handle for door/ window 10 Cm size of ASIS

(F)S.S. Handle for Door 15 Cm size of ASIS 304 Grade 2.00 76.17 No.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

(I) S.S. Pipe Handle for door 30 Cm size o ASIS 316 Grade

(J) Inter Lock [Kadaka lock] 2.00 209.71 No.

(H) Locks Godrej Mortice lock cover 2.00 329.63 No.

(I) Door closers arrow type with spring 12 length as approved

sample (30 cms)

(J)Handle for doors Windows Cupboards etc. Brass 15 cms.

(K) S.S. Door / window hinges 4x1"x1" 2.00 54.78 No.

Providing and fixing FRP FRAME size 125 x 65 mm and

35 mm thick FRP shutter with wood grain raised panneled

design finish shutter having extra reinforcement on sides &

edges in Gel coat finish. The core of the shutter & frame is to

be filed up with injected polyurethene foam done in situ along

71 with embedded wooden pieces for stiffening & also taking 5.00 2019.98 S.M.

hinges & fixtures. The whole FRP frame & shutter is to be

water proof weather proof,termite proof &resistance to mild

acid/alkali. Rates are to be inclusive of S.S.hinges with

fastener sleeve & alluminium fixtures & fastentings.

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 127mm x

38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm@ wt

kg/m, vertical member of size 122.20mm x 31.75mm x

1.50mm @1.398 kg/mt with sliding shutters of horizontal

72 member size 40mm x 18mm x 1.29mm@ 0.456kg/mt 5.00 2140.33 S.M.

,vertical member of size 40mm x 18mm x 1.29mm @

kg/mt with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc complete for window.

(A) Same as above but Colour anodized 5.00 2140.33 S.M.

Providing and fixing window having extruded aluminium

Powder Coated section frame main outer size 95 mm x

mm x 1.17 mm (of jindal section no:2459 @ Wt. of

Kg/mt), horizontal Three track member size 92 mm x

mm x 1.30 mm (of jindal section no;8688, @ Wt.

Kg/mt), vertical member of size 92 mm x 31.75 mm x

mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt) with

sliding shutters of horizontal member size 40 mm x 18 mm x

1.29 mm (of jindal section no:8947 @ wt. of 0.456 kg/mt),

vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal

section no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder

coated aluminium fittings & fixtures and transparent silicon

sealant glass fixing to frame as per details etc.

(A) Same as above but Colour anodized 2.00 1591.87 S.M.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing and fixing window having extruded aluminium

Powder Coated section frame main outer size 63.50 x

x1.95 mm (of Jindal section no.4605, @ Wt. 1.094Kg/mt)

horizontal Two track member size 61.85 mm x 31.75 mm x

1.20 mm (of jindal section no:8687, @ Wt. 0.695 Kg/mt.)

vertical member of size 61.85 mm x 31.75 mm x 130 mm (of

jindal section no:8758 @ wt. of 0.659 kg/mt) with sliding

shutters of horizontal member size 40 mm x18 mm x 1.29 mm

( of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical

member of size 40 mm x 18 mm x 1.29 mm (of jindal section

no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

Kg/mt) with 5 mm thick tranparent bronze colour tineted float

glass with powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

etc. complete for window.

(A) Same as above but Colour anodized 2.00 1705.67 S.M.

Providing and fixing standared extruded ofalluminium section

of size 63mm x 38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with

75 colour Powder Coated alluminium frame for ventilation with 1.00 2414.00 S.M.

5 mm thick frosted glass as details etc complete for

(A) Same as above but Colour anodized 2.00 2414.00 S.M.

Providing and fixing standared extruded of aluminium section

of size 61 x 37.0 x0.90 mm (of Jindal section no.14080, @

76 Wt. 0.471 Kg per mt) with Powder Coated alluminium frame 2.00 2336.00 S.M.

with 5 mm thick transparent bronze colour tinted float glass

as details etc. complete for fix window.

(A) Same as above but Colour anodized 2.00 2336.00 S.M.

Providing & fixing partly panel & partly glass Powder

Coated Aluminium doors with aluminium section of

Hindalco, Jindal , Narmada,Banco or Equivalent approved

make having Poder Coated outer frame Leg Partition section

of 63.50 mm x 38.10 mm having weight 1.158 kg. / R.M.

shutter section having size 83.5 mm x 44.45mm ( top &

bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door

vertical 47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top

hing side:0.974 kg./mt.), Glazing Clip (Jindal Section No.

19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass in acid

frogting and 12 mm thick prelaminated sheet of Greenlam,

Panama or archid make as approved by Engineer-incharge

including fixing brass pivot, handle, lock etc. complete.

(A) Same as above but Colour anodized 2.00 3237.00 S.M.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing & fixing Powder Coated Aluminium partly

glazed and partly panelled partition using medium duty

sections of Hindalco,Zindal, Narmada, Banco or Equivalent

approved make having section 63.50 mm x 38.10mm ( Frame-

.758 kg/rmt & Middle section- 0.819 Kg./rmt), Galzing Clip

with 5 mm thick clear float glass of approved make including

78 all other necessary fittings and fixtures. Entire work will have 5.00 2400.00 S.M.

to be made water proof using necessary rubber sectioned

wherever required. Gaps all round the frame to be filled with

approved water proof sealent. Bottom portion of doors both

side to be covered with 12mm thick prelaminated particle

board of approved make and quality and as per design.

(A) Same as above but Colour anodized 1.00 2400.00 S.M.

Providing & fixing Glass Table Top using 08mm th.clear

79 glass with crystal edge & necessary hardware materials etc. 1.00 1350.00 S.M.

complete as per instruction by engineer in charge.

Providing & laying Non reflective solar contact film for

80 fixing on glass as approved colour,design,cutting complete as 1.00 406.57 S.M.

per instruction by engineer in charge.

Providing & fixing door closer Ozon / Dorma / Hyper /

Hardwin / Godrej / Alluminium body ISI brander equivalent

make with necessary hardware materials etc. complete as per

instruction by engineer in charge.

Providing & fixing water proof plywood (ISI marks

grade) at the door,window and any space in the building.

necessary hardware,screws materials etc. complete as per

instruction by engineer in charge.

Providing & fixing M.S.Grills of required pattern to wooden

frames of windows etc. At all floor levels with M.S. flats at

required spacing & frame around square or round bars with

round headed bolts & round headed bolts and nuts or by

screws incl. Priming coat of Red lead paint etc. comp. (A)

Plain grill For all Floors

Providing & fixing in position collapsible steel shutters with

vertical channels 20 x10 x 2 mm. Braced with flat iron

diagonals 20 x5mm size with top & bottom rails of T-iron

40x40x6mm. with 38mm dia. steel pulleys comp. with bolts,

locking arrangements, stoppers, handles incl. applying a

priming coat of Redlead paint etc. comp.

Steel work welded in built up sections, framed work

85 including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

(A) in beams & joists channels angles, tees, flats with

connection plates or angle cleats as in main & cross

beams,hip & trussed purlins connected to common raffers &

(B)For work like chain link fencing, above compound wall

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall

Providing and Fixing Hollow steel Sections Framed

Work including Cutting, Hoisting, Welding & Fixing in

position Purlin, Main Chord etc. as per Engineer- in-

charge.TATA / JINDAL / ASIAN Make

Providing and fixing stainless steel ( Grade 304) railing made

of Hollow tubes, channels, plates etc., including welding,

grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners , stainless steel

bolts etc., of required size, on the top of the floor or the side

of waist slab with suitable

arrangement as per approval of Engineer-incharge, (for

payment purpose only weight of stainless steel members shall

be considered excluding fixing accessories such as nuts,

bolts, fasteners etc.).

Providing and fixing G.I. chain link of 50mm x 50mm size x

10 guage thick with nuts, bolts, washer or G.I. pins, excluding

88 M.S. angles etc.complete as per relevent IS specification & 200.00 311.00 S.M

directed by engineer in charge. (TATA or Jindal Make)

Providing and fixing and fitting TATA or Jindal make G.I.

barbed wire fencing with necessary barbed wire (12 x

89 guage, weight not less than 0.14 kg. / mt.) pins, hooks, 200.00 125.00 Kg.

excluding M.S. angles etc. complete as per relevent IS

specification.& directed by engineer in charge

Providing and Fixing hot dip concertina coil of 610 mm dia.

made out of 2.59 mm (12 SWG) hot dip galvanized (G.I.

coating not less than 200 gm/sqmt.) th. wire having 80 nos. of

spikes and 200 nos. of clips made out of stainless steel (AISI

304) 1.5 mm th. dia., G.I. strips 0.5 mm th. ( G.I. coating not

less than 120 gm/sq.mt.) weight of one coil should not be

lesss than 15 kg. etc., complete at the top of compound wall

fixed with S.S. clips and binding wires whereever necessary

etc. complete. ( NOTE: Strctching length of one coil should

not be more than 9 mt.)

Providing & fixing colouron galvaniced steel, zinc /

aluminium allus coated sheet 0.5 mm. thick roofing fixed

with gslvanised grom J or L hook bolts and bolt 8mm dia with

bituman and impet washer filled with white lead etc.

Excluding the cost of purlins rafter and trusses. (Tata / Jindal

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing corrugated G.I. Sheets of class-3 roofing fixed

with glavanished iron J or L Hooks, Bolts and nuts 8m

diameter with bitumen and G.I. limpet washer or G.I. limpet

92 washer. filled with white lead complete excluding the 10.00 727.13 S.M.

cost of purlins, Rafters and Trusses. (1) 0.80 mm thick

sheet. (Tata / Jindal or

Providing corrugated G.I. Sheets of class-3 roofing fixed

with glavanished iron J or L Hooks, Bolts and nuts 8m

diameter with bitumen and G.I. limpet washer or G.I. limpet

washer. filled with white lead complete excluding the cost of

purlins, Rafters and Trusses. (1) 0.63 mm thick sheet. (Tata /

Jindal or equivalent)

(ii) 0.63mm THick Sheet 50.00 1016.00 S.M.

Providing & fixing 150mm wide 450mm over all

semicircular plain G.I. sheet class-3 gutter with iron

brackets 40mm x 3mm size bolts, nuts, washers etc.

including marking necessary connection with rain water

(i) 0.8 mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet

fixed with G.I. "J" of "L" hooks bolts and nuts 8mm dia

G.I. limpet and bitumen washer

complete (1) 0.80 mm thick

Providing & fixing 150mm wide 450mm over all

semicircular plain G.I. sheet class-3 gutter with iron

96 brackets 40mm x 3mm size bolts, nuts, washers etc. including 25.00 412.00 R.M.

marking necessary connection with rain water pipes. (i)

Providing ridges or hips 600mm over all in plain G.I. sheet

fixed with G.I. "J" of "L" hooks bolts and nuts 8mm dia G.I.

limpet and bitumen washer complete (1) 0.63mm thick sheet

Providing & Fixing UV stabilise FRP Sheet roofing with

overlapping the main cladding on both edges. All fixing holes

must be predrilled oversize as specified for the sheet length

and fastener being used. Fasteners must be fitted with

approved washers. Fixings should be tightened to ensure a

weatherproof seal but they must not be over tightened Side-

lap fasteners must also be installed at specified centers with

the FRP sheet having clearance holes provided as per the

main fasteners Weatherproofing shall be provided at all

flashing points under the normal flashing by the fitting of a

foam closure strip to match the profile being used. Closure

strips will be sealed to the sheet with an appropriate non

setting silicone sealant. Excluding the cost of purlins rafter

(a) 1.5 mm thick 2.00 992.00 S.M.

(b) 2 mm thick 2.00 1100.00 S.M.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing & Fixing Polycarbonate sheet roofing with

surface of the sheet is coated with an anti-UV Co-extrusion

layer having good weather resistance, it can maintain its

optical properties and mechanical performance for a long

time. Fasting is usually done by screws. , The fastening

screws should be inserted about 500 mm apart and 300mm

99 apart Along the supporting internal purlin and edge pulin.All

fixing holes with diameter at least 2 mm

larger than screw must be predrilled into each screw location.

The screws should be 6mm diameter with length according to

sheet thickness and corrosion resistant, with at least heavy

duty hot dripped galvanized or stainless steel. Excluding the

cost of purlins rafter and trusses.

(a) 1.5 mm thick Solid Sheet 2.00 1261.00 S.M.

(b) 2 mm thick Solid Sheet 2.00 1510.00 S.M.

Providing & Fixing 80 mm dia M.S. pipe as vertical post

are beded in 1:1.5:3 concrete also horizontaly in line and

connecting to purline angle etc by welding rereting etc. (a)

Medium duty "B" Class

Providing & Fixing 50 mm dia M.S. pipe as vertical post

are beded in 1:1.5:3 concrete also horizontaly in line and

connecting to purline angle etc by welding rereting etc. (a)

Medium duty "B" Class

Providing and fixing rolling shutters of approved make

made of 80 mm wide M.S. laths inter locked together through

their entire lenght and jointed together at the ends by end

102 locks mounted on specially designed pipe shaft with bracket

plates, guide channels and arrangements for inside and

outside locking with push-pull operation including the cost of

hood cover and spring etc. complete

(A) Shutters having width below 3.5m 0.00 3503.41 S.M.

Providing and fixing rolling shutters of approved make

made of 80 mm wide M.S. laths inter locked together through

their entire lenght and jointed together at the ends by end

locks mounted on specially designed pipe shaft with

bracket plates, guide channels and arrangements for

inside and outside locking with push-pull operation

including the cost of hood cover and spring etc. complete.

(B) Shutters having width 3.5 M and above

Providing and fixing hard drawn steel wire fabric

75mmx25mm mesh or weight not less than 7.75 kg.per

Sq.M. to window frames etc. including 60x 20mm beading of

Painting two coat (excluding priming coat) on new steel

and other metal surface with synthetic enemal paint,

burshing to give an even shade including cleaning the surface

of all dirt, dust and other foreign matters.

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia

M.S. bar bent to shpe with hooked ends to RCC slabs curing,

layig including painting the exposed portion of loops, all as

per standard design complete.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Distempering two coats with oil bound washable distemper

of approved brand & manufacture & of required shade on

wall surface to give an even shade over and & including a

priming coat of alkali resistance primer of approved brand

after throughly brushing the surface to give an even shade

after throughly brushing the surface free from mortar

droppings and other foreign matter and also including

preparing the surface even and smooth.

(A) For wall 100.00 72.23 S.M.

(B) For ceilings 25.00 80.35 S.M.

--do---- Extra Subsequant coat over above Item

(A) For wall 100.00 30.39 S.M.

(B) For ceilings 25.00 33.57 S.M.

Apply two coats of putty and two coats of primer of

approved brand and manufacture on new wall surface to give

108 an even shade including thoroughly brushing the surface free 100.00 40.59 S.M.

from mortar dropping and other matter and sand papered

Distempering two coats on previously distempering wall

(without primer) with oil bound washable distemper of

approved brand & required shade on wall surface to give an

even shade after throughly brushing the surfaces clean of all

grease, dirt loose places of sceles & also including preparing

the surface even and smooth.

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall surface

110 to give an even shade including throughly brushing the 100.00 79.39 S.M.

surface free from mortar droppings and other foreign matter

and sand papered smooth.

For every subsequent coat Extra over item no.above 50.00 33.72 S.M.

Applying Priming coat over new steel and other metal

surface after over and including preparing the surface by

throughly cleaning oil, grease dirt and other foreign matter

and scoured with brushed fine steel wool, scrapers and sand

paper with ready mixed priming paint brushing red lead.

Painting two coats of enamel paint (Excluding priming

coat) over previously painted

112 wall after removing entire surface with even shade & surface 200.00 60.00 S.M.

after removing dirt, dust

foreign matter etc. comp.(M.R.)

Painting two coats of enamel paint over priming coat

(including priming coat) on

113 wall after removing entire surface dirt, dust foreign matter & 200.00 90.00 S.M.

also incl. preparing the

surface even & sand papered smooth etc. comp.(M.R.)

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker colours.)of

ICI Dulux or Apex Ultima of Asian Paint including applying

exterior acrylic primer coat as per manufacturers specification

and directions in shade and colour approved by architects, on

exterior surfaces of the building including scaffolding,

preparing the surface, watering, curing etc. complete and as

directed by the architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt,

chalk, grease, fungi, algae and flaking paint. This can be

achieved by brushing with a wire/ stiff coir brush, followed

by water jetting if required. Fill up all minor cracks and

defects with white cement and sand mixture in the ratio 1:3.

For application on previously painted wall, previous coatings

of paint must be thoroughly scraped off and Clean the surface

thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to

dry for 4-5 hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

weather shield max paint

Box Cutting the road surface to proper slope and camber for

making base includinng removing the excavated stuff and

depositing on the road side slope as directed up to 50 mt.

Preparation of subgrade with Compacting, Levelling and

consolidation of subgrade with miniroller /plate vibrator

machine including watering and filling in depressions which

occur during the process as directed by engineer in charge.

Providing & filling with Mix soil in layers of 20 cm. Th'.

Incl. watering, ramming & consolidation etc. complete.

Providing, Supplying & Sprading of Gravel in Play area

including dressing etc. comp.

Supplying & filling fine sand(pana) in 75 mm / 100 mm /

150 mm compacted thickness over the base including

119 necessary compaction, watering etc. complete. Item includes 50.00 413.09 C.M.

leveling by using vibratory plates compacted machine and as

directed by engineer in charge.

Providing & laying Granular sub base (GSB)confirming to

Grading-V of Table 400.0 of compacted thick of 150mm with

specified graded stone metal and sand mixed in place and laid

with mechanical means spreading with motor grader and

compacting with vibratory roller having minimum 80-100 KN

static weight to acheve desired density of 98% of MDD

including all material, labour, machinery with all leads and

lift etc. complete.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Removing & resetting existing readymade c.c. kerb stone of

required size & thickness in line .level and in truly vertical

position including filling joints in C.M. 1:1 (1 part of cement

121 : 1 part of stone dust) smooth pointing in C.M. 1:1 (1 part of 600.00 56.00 R.M.

cement : 1 part of coarse sand) including watering etc.

complete and as directed by engineer in charge. (M.R)

Removing and Resetting of Paver block of walk-way with

122 necessary sand / pana filling and make in line and level with 1000.00 102.00 S.M.

necessary vibrating using compactor machine.

Providing 100mm thick readymade C.C. kerb of strength M-

20 (size 300mm x 380mm) purchased from SMC's approved

paverblock manufacturer & setting in line, level and in truly

vertical position, including filling joints in C.M. 1:1 (1 part of

cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1

part of cement : 1 part of coarse sand) including watering etc.

complete and as directed by engineer in charge.

For rounding at the edge of footpath (For fanning portion) 20.00 274.00 R.M.

Providing interlocking type Rubber moulded cement

concrete paver block of approved shape, design & colour

having 60mm thickness (M-35) purchased from SMC's

approved paverblock manufacturer only & fixing of fine sand

124 bedding. Item includes levelling by using vibratory plates

compacted machine. Item also includes all materials, labour,

equipments,tools, plants, watering, cleaning etc. complete.

With colour 200.00 524.00 S.M.

Without colour 200.00 524.00 S.M.

Providing & fixing interlocking type Cement Concrete

paver block of approved shape & design having 60 mm

thickness (M-40) purchased from SMC's approved

125 paverblock manufacturer only on fine sand bedding. Item 100.00 553.00 S.M.

includes leveling by using vibratory plates compacted

machine. Item also includes all materials, Labour, euipments,

tools, plants, watering, cleaning etc. complete.

For Road Junction 80 mm thick ( M-50) 5.00 714.00 S.M.

Providing & laying cement concrete Pavement using 1:1.5:3

(1 cement:1.5 sand:3 graded stone agg. 20 mm nominal size)

126 & Vaccuum Dewatering technique including floating 20.00 5981.00 C.M.

surface with a skim powder floater, curing etc. complete.

Providing & laying cement concrete Pavement using 1:2:4 (1

cement:2 sand:4 graded stone agg. 20 mm nominal size) &

Vaccuum Dewatering technique including floating surface

with a skim powder floater, curing etc. complete.

Providing and laying 200 micron plastic sheet on prepared

sub base For V.D.S Concrete

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of

129 total thickness with filling of epoxy sealent as directed by 100.00 50.00 R.MT

engineer in charge

WATER SUPPLY & SANITARY ITEMS

Prov.& Fixing water closet squatting pan (Indian type

W.C.pan) at all floor levels, size 580mm incl. 100 mm size

"P'or "S" trap for water closet squatting pan joining the trap

130 with the pan & soil pipe in C.M. 1:1 (1cement :1 fine 5.00 1401.60 No.

sand) etc. Comp.(A) Vitreous china long pattern of approved

Providing and fixing Wash Down Water closet European

type W.C. pan with integral P or S trap including jointing the

trap with soil pipe in cement mortar 1:1 (1 cement : 1 find

sand) (seat and cover to be measured and paid for

separately) (A) Viterous china pattern - I (i) in approved

Providing and fixing plastic seat and cover for wash down

132 water closet with C.P. brass hinges and rubber buffers (B) 2.00 291.33 No.

Plastic seat and cover.

Providing & fixing wash basin with single hole for pillar tap

at all floor levels, with C.I. or M.S. Brackets painted white

incl. cutting holes & making good the same incl. fittings such

as pillar tap, capstan head screw down high pressure with

screws, shanks & back nuts, C.P. Brass waste trap, screw

down stop tap 15 mm. dia. etc. complete. (A) Vitreous

china flat back wash basin 550 mm.x 400 mm. size in

approved colour For all Floor

Providing & fixing Urinal or approved quality including

conecting the Urinal with waste pipe, tap etc. complete. (A)

White earthenware flat back or corner type size 430 mm x

Providing & fixing 600 mm.x 450 mm. mirror of superior

glass at all floor levels, mounted on 6 mm. th. A.C. sheet or

plywood sheet & fixed to wooden plugs with C.P.brass

screws and washers etc. For all Floor

Providing & Fixing C.P. Brass screw down bib tap at all

136 floor levels, polished bright etc. comp.-(A) 15mm dia. For all 20.00 186.83 No.

Providing and fixing waste Pipe for Washbasin or sink (A )

Prov.& Fixing water closet squatting pan (Orissa type

W.C.pan) at all floor levels, size 500mm x 400 mm incl.

mm size "P'or "S" trap for water closet squatting pan joining

the trap with the pan & soil pipe in C.M. 1:1 (1cement :1 fine

sand) etc. Comp.(A) Vitreous china long pattern

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar

Providing and fixing Wash Down Water closet European type

W.C. pan with integral P or S trap with normal closing seat

139 cover L bend ncluding jointing the trap with soil pipe in

cement mortar 1:1 (1 cement : 1 find sand) (A) Viterous china

Make- Cera CONVENTIONAL B1510121 , Parry ware

C0297*/ C0278, HindWare sleek 20011, Jaquar- CNS-WHT- 0.00 3282.00 No.

Prov. & Fixing S.W. Gully trap with C.I.grating brick

1:5)chamber & water tight C.I. cover with frame of

300mmx300mm size

(inside) with weight includ. plastering smooth inside &

outside 15mm. th' in

C.M.1:3 etc. comp. (i) Square mouth traps---(A) 100mm x

100mm Size -P type

(A) 100mm x 100mm Size -P type 5.00 1292.19 No.

(B) 150mm x 100mm Size- P Type 0.00 1246.92 No.

Prov. & Fixing S.W. Gully trap with C.I.grating

brick masonary (C.M 1:5)chamber & water tight Pre

cast R.C.C. cover of 300mmx300mm size (inside) includ.

plastering smooth inside & outside 15mm. th' in C.M.1:3 etc.

comp. (i) Square mouth traps--

(A) 300mm x 300mm Size -P type 5.00 1098.48 No.

(B) 150mm x 100mm Size- P Type 0.00 1053.20 No.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension ,455 x 610 mm & 450 mm deep sewer trap

chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with

cement plaster 15 mm th' in C.M. 1:3 inside & outside to

142 exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 1.00 3155.63 No.

Sand : 4 Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less

than 38 kg. On top etc. comp. for single pipe.

.(A).Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 2.00 222.71 Each

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M.

1:3 inside & outside to exposed faces, R.C.C. top slab with

1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm

size) ,Foundation concrete 1:5:10 & fixing C.I. cover with

frame to be not less than 38 kg. On top etc. comp. Inside

dimension,455 x 610 mm &450 mm deep for single pipe

.(A).Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 5.00 242.39 Each

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing & fixing white vitreous china urinal of size

x325mm as per IS-2556 (Part-2 ) with C.I. hangers and 15mm

144 dia. C.P. spreader,32mm dia CP bottle trap and pipe to wall

with C.P. flange complete including cutting and making good

the walls and floors wherever required.

Make -Cera,Parry ware, Jaquar, HindwareMake- CeraCat.

No. S4020103, Parry ware C0501*, Jaquar URS-WHT- 0.00 2476.00 No.

13261H ,HindWare BACK SMALL

Providing & fixing Wash Hung basin with single hole for

pillar tap, Size- 550 x 400 mm at all floor levels, with C.I. or

M.S. Brackets painted white incl. cutting holes & making

good the same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH),

Jaquar SLS- WHT -6801 ,HindWare10004

Providing and fixing Towel Ring fabricated from seamless

stainless steel tube 2mm thick in bath room with polished

wall flange at end of bars with heavy duty anchor fasteners &

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua

ACN- 1121N ,HindWare F880007

Providing & fixing S.S.towel rail of 600 mm long approved

147 make including, providing & fixing C.P. brass screws,

making holes in walls & making good.

Make- Cera F5015103CH, Parry ware F880005T, Jaquar

1111BSM ,HindWare F880005T

Providing & Fixing stainless steel recessed type Soap dish of

148 approved make. Including providing & fixing screws,

washers, cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-

1131N ,HindWare F880011

Prov.& Fixing Health Faucet ABS Body with wall Hook and

1 Meter chrome plated PVC Hose Pipe.

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-

587 ,HindWare F160109

Providing & Fixing 15 mm Dia bib tap with wall Flange at

levels, polished bright etc. comp.

Make- Cera F2013151 BIB COCK, Parry wareG3104A1,

HindWare 0.00 1323.00 No.

F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK

Providing & Fixing 15 mm Dia 2 way bib tap with wall

151 Flange at all

floor levels, polished bright etc. comp.

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat.

F530004, Jaquar FLR-5041N

Providing Metropole Flush Valve Dual Flow 40mm Size

(Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-

1089NSQ ,HindWare F860075

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing flush cock consisting lever, cartridge sleeve &

Make- Cera EXPOSED PART F2013751 &Concealed part

F4060101 ,Parry ware T9824A1&T9823A1, Jaquar FLR

5083 KN , CONCEALED BODY ALD-081,HindWare 0.00 2110.00 No.

F280052 & CONCEALED STOP COCK F850105

Providing & fixing 15mm C.P. brass angle valve (Stop

Cock) with C.P. copper connecting pipe 450 mm long and

nuts, washer and brass flange complete, including cutting and

making good the wall where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat.

F440020 F850094, jaquar CON 053 KN

Providing & fixing of overhead shower 80 mm (3”) dia with

155 3 flow with

Overhead Shower arm 200 mm with wall flange complete

Make- Cera F7010602AB, Parry ware, Jaquar OHS-1989

,HindWare 0.00 1569.00 NO.

Cat. No.: F160144

156 Providing Sink Cock with Regular Swinging Spout

Make- Cera F2008251 , Parry ware G3321A1 , Jaquar FLR-

,HindWare F650013

Providing and fixing C.P. Brass pillar cock with copper

connection ,C.P. Brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1,

HindWare Cat. No.: F650003, Jaquar FLR-5011N

Providing, Lowering & laying joining R.C.C. NP2 CLASS

158 Pipe In C.M. 1:1 of following nominal internal diameters

incl. Testing of pipes and joints etc. Comp

Providing & laying in trenches galvanised mild steel

tubes(medium grade) TATA / ZENITH / ASIAN / JINDAL

MAKE of the following nominal bore & tube fittings etc.

Providing & Fixing to wall, ceiling floor at all floor levels,

galvanised mild steel tubes(medium grade) TATA /

160 ZENITH / ASIAN / JINDAL MAKE of the following

nominal bore, tube, fittings & clamps incl. making good the

wall ceiling and floor etc. complete.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing & Fixing gun metal check or non return full way

wheel valve at all floors levels, etc. complete.

Providing and fixing waste Pipe for Washbasin or sink (A )

163 Providing and fixing Supply Pipe for Washbasin or sink 5.00 80.00 No.

Providing and fixing Jet Sprey Cock at all floor level etc.

165 Providing and fixing

(A) 40 mm thick RCC cover for simple chamber,s.w.trap &

(B) PVC water tank cover upto 2000 Lit. 5.00 200.00 No.

Providing and fixing C.I. Machinehole cover 0.60 x

mt. Size having weight not less than 35 Kg. etc. complete.

Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

13592 (Type "B") of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil

and waste discharge system at all floor levels incl. All

fixtures like bends, tees, shoe etc. jointed with resin of

approved brand & manufacture etc. comp. (M.R.)

Providing & fixing U-PVC pipes Confirming to IS no.

(Type "A") of Prince/Supreme/Jain/Astral/ Tulsi/Finolex

168 make for rain water at all floor levels incl. fixtures like

bends, tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. (M.R.)

Providing, Laying and jointing on true line and level UPVC

pipe (SCH-40) line of Prince/Supreme/Jain/Astral/

Tulsi/Finolex make including fittings make or equivalent as

approved by angineer-in-charge. Pipe shall be fixed on the

wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/

Supreme/ Jain/ Astral/ Tulsi/Finolex make for water supply

line at all floor levels incl. fixtures like bends, tees, shoe etc

joined with resin of approved brand & manufacture etc.

170 comp. Pipe shall be fixed on the wall the help of clamp at

every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including

cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 110x110 mm diameter with jali of the following

171 nominal diameter of self cleaning design with C.I. scread 5.00 558.36 No.

down or hinged grating including the cost of cutting and

making good the walls.

Providing & Fixing in position PVC Cowl vent to pipes of

172 Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp.

Providing & fixing M.S. Holder Bat clamps at all floor

levels of approved design to C.I. Or S.C.I pipes including the

cost of cutting holes & making good the wall etc. Complete -

100 mm. dia. (M.R.)

Providing & fixing G.I./Aluminum Patti clamps at all floor

levels of approved design to C.I. Or S.C.I pipes including the

cost of cutting holes & making good the wall etc. Complete -

100 mm. dia. (M.R.)

Providing & fixing Z - clamps at all floor levels of approved

design to C.I. S.C.I. or PVC pipes including the cost of

cutting holes & making good the wall etc. Complete -

mm dia as per architect instructions.

(C) 110 mm dia to upto 150 mm dia 5.00 90.00 No.

(C) 150 mm to 200 mm dia 5.00 98.00 No.

Providing & Fixing Kathi around the vertical PVC

drainage pipes for concealing with cement plaster 20 mm

avg thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as

per instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 5.00 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 20.00 180.00 R.M.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing erecting and fixing double coated

Sintex/Super/Reno PVC (ISI) mark water tank of required

capacity each with all necessary fittings & connection etc.

complete on terrace.

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work

incl. boxing, centering, vibrating, curing & mixed with

approved water proofing cement compound or

"CEMWET"or"PIDICRETE LW"integral water proofing

admixture as water proofing agent to be mixed with 50 kg.

cement bag shall be as recommended by the manufacture of

the water proofing material, concrete work for top, bottom

slab & side pardi for Under ground Tank & Item incl.

Necessary excavation & refilling the available earth, 15 cm

th' C.C 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4

outside wall, inside R.C.C. pardi as per design, 10mm.th.

water proofing cement plaster in C.M. 1:3 with smooth

finishing,watering etc.Comp.to all inner face & bottom of

tank curing etc. comp. incl. Locking arrangement, outlet,

inlet, overflow & wash out pipe arrangement as necessary &

C.I. Cover 0.60 x .045 weight not less then 35kg. etc. com. as

per structural drawing excluding Steel & as directed by

Engineerin- charge

Underground tank 1000.00 5.46 Lit.

Providing and filling in depressions of Bath and W.C. At all

floor levels, after completing plumbing work of pans,

pipes,traps etc.with cinder or fly ash as directed by Engineer

in charge etc. comp..

NOTE :- (1) The whole work is to be executed through

specialized agency with a guarantee of 10 (Ten) years given

180 on a prescribed proforma duly stamped (2) The rate shall

include for work at all floors & conducting water proof test as

directed. (M.R.)

(A) Providing and laying water proofing treatment to

vertical and horizontal surfaces of depressed portions of

W.C.,kitchen and the like consisting of : (a) I course of

applying cement slurry @ 4.4 kg/sqm mixed with water

proofing compound conforming to IS : 2645 in recommended

proportions. (b) II course of a layer of plaster in C.M. 1:3

with water proofing compound confirming to IS:2645 about

25 mm. th' in the floor of the depression & about 18mm th'

On the side walls of the depression up to the floor level, water 20.00 296.00 S.M.

proofing plaster about 18 mm. th' be continued on the walls

above the floor level for a height of 600 mm. with surface

suitable to receive further treatment (c) Finishing top with

stone aggregate 10mm to 12mm nominal size spreading

@0.008 C.M./S.M., thoroughly embedad in plaster layer. as

per specifications & instructions of Engineer in charge

(Cement consumption 0.316 Bags / S.M.)

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

(B) Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc.

consisting of following operations. (a) Applying and grouting

a slurry coat of neat cement using 2.75 kg/sqm of cement

admixed with proprietary water proofing compound

comforming to IS:2645 over the R.C.C. slab including

cleaning the surface before tratment. (b) Laying cement

concrete using broken bricks/brick bats 25 mm to 100 mm

size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse

sand) admixed with

proprietary water proofing compound conforming to IS:2645

,brick bats is finally covered by jointless cement plaster

20mm th. in C.M. 1:4 added with special water proofing

compound confirming to IS:2645 & top smooth finished with

trowel with false chequered marking of 300 mm.size.The

treatment is carried along the vertical surface of the parapet &

other adjoining wall up to height of about 300 mm in a shape

of quarter round vata Incl. curing etc. Comp. With average

thickness of 120 mm and minimum thickness at khurra as

(c) The whole terrace so finished shall be flooded with water

for a minimum period of two weeks for curing and for final

test. All above operations to be down in order and as directed

and specified by the engineer-in-charge. With average

thickness of 120 mm and minimum thickness at khurra as

mm. (Cement consumption 0.511 Bags / S.M.)

Proiding & laying water proofing treatment to vertical and

horizontal surfaces like consisting of (a) I course of applying

cement slurry 4.4 kg per sq.mt. mixed with water proofing

compound confirming to IS:2645 in rcommended proportions.

(b) II corse of 20mm cement plaster 1:3 mixed with water

181 proofing compound in recommended proportion (c) III course 30.00 505.00 S.M.

of applying blown or / resideal bitumen applied hot at 1.7 kg

per sqm of area. (d) IV course of 400mm micron th. PVC

sheet. (Overlaps at joints of PVC sheet should be 200mm

wide and pasted to each other with bitumen about 1.7 kg./

Providing cement vata (10 cm x 10 cm size) quarter round in

182 cement mortar 1:1 including neat cement finishing, watering 20.00 23.68 R.M

etc. complete..

Providing & fixing G.I. Rain water spout of 50 mm.dia &

30 cm length etc.

Providing & Fixing chromium plated brass half turn flush

184 cock at all floor levels, of approved quality incl. fixing in pipe 10.00 263.77 No.

line etc. Comp.-- 25 mm dia.

Providing & Fixing abonite ball cock of approved qualities

directed etc. comp. (A) 25 mm. dia.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing & Fixing 3 mm thick metal sheet with CNC

cutting to fix it on vertical surface.Steel work welded in

built up sections, framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead

paint in beams & joists channels angles, tees, flats with

connection plates or angle cleats as in main & cross beams,

hip & trussed purlins connected to common raffers & the like.

Providing & fixing black board on walls of

1.8mt.x1.2mtsize made up to 12 mmth.B.W.P .Plywood

(Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or

century) fixed with teak wood beading of 65 mmx 50mm size,

rubbing & sanding comp., incl. applying two coats of black

board paint over a priming coat on plywood & French

polishing the frame all round etc. Comp. as per instruction of

Engineer in charge (M.R.)

Providing & Fixing Reading table size 8' x 4' and height 2'-

6" with table top 18mm thick (Brand Saras,Kitply,Uniply,

Anchor, Green,Wood Stock or century) commercial plywood

with 1.0mm thick lamination sheet fitting with teakwood

moulding table top supported on 3" x 3" teakwood leg & 3" x

11/2" teakwood framing top and bottom with french polish

labour work hardware etc. as per site in charge instruction and

as per drawing.

Providing & Fixing Librarian table with 18mm thick

commercial plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) )with 1.0mm thick lamination

sheet table top supported on 2" x 2" teakwood leg & make

189 nos. drawers of 1' 3" width on both side with necessary french 0.00 8390.00 No.

polish hardware labour etc. as per site incharge instruction

and as per drawing ( Size 4' x 2'-6" x 2'-6", all framing

other then legs are teak wood of size 2" x 1")

Providing & fixing Green board on walls of 1.8mt.x1.2mt

size made up to

mm th.ply (using IS 710 Marin ply) with 1 mm thick outside

0.8mm backside white laminate & with good Quality of

appropriate fittings of Alluminium fittings or teak wood

bedding 65 mmx 50mm

size, rubbing & sanding comp., as per instruction of Engineer

in charge (M.R.)

Providing & fixing White board on walls of 1.8mt.x1.2mt

size of 12mm thick with appropriate fittings and Alluminium

fittings comp., as per instruction of Engineer in charge (M.R.)

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing & Fixing simple 12mm thick commercial plywood

(Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or

century) Rack of size 6' x4' and depth 1'-6" 5 Nos.

horizontal partition, supported 2" x 1" framing with necessary

french polish hardware labour etc. as per site incharge

instruction and as per drawing.

Providing & Fixing fitting commercial 8mm thick plywood

(Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or

century) magazine stand of Size 6' x 4' with 3" x 11/2"

193 vertical supporting and adjustable lag support and horizontal 0.00 6745.00 No.

simple 2" x 1" teakwood patti for magazine support with

necessary french polish hardware labour etc.as per site in

charges instruction and as per drawing.

Cutting out cracks of wall or terrace to V section

194 ,cleaningout, grouting with cement and sand slurry 1:3 (1 10.00 65.23 R.M.

cement : 3 sand ). at any height

Providing and fixing Soft Pin Board With Aluminium Frame

195 As per Design by architech and engineering in charge for Fix 5.00 375.00 S.M.

Providing & fixing of 50% Blackout window curtain

(Diamond Pattern) with Cloth aster with S.S. 25mm Hollow

Pipe With Covers.As per attached drawing & instructed by in

charge Consultant.

Providing and fixing eco-friendly light weight calcium

silicate false ceiling tiles having Tegular edge & 15 mm

Thick Densified edges on the Tile Periphery for Extra

Strength The Light weight calcium silicate ceiling

tiles shall have , light reflection 85% non-combustible

as per B.S. 476 part IV, 100% humidity resistance and also

having thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium Silicate

tile shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe

197 having NRC value of 0.75 NRC or equivalent of size

X 595 mm to be laid on true horizontal level suspended

inter locking metal grid of hot dipped galvanized

steel sections (galvanizing @120 grams per sqm

including both side) consisting of main ‘T’ runner suitably

spaced at joints to get required length and size of

24X38mm made from 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross ‘T’ of size 24X28mm

made out of 0.33mm (Minimum) sheet spaced 1200mm

along spaced between main ‘T’ at 600mm centre to centre

to form agrid of 1200X600mm and secondary cross ’T’ of

198 GYPSUM CEILING

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Supplying and Fixing of Suspended ceiling system

components which includes Single Layer Boarding with

12.5mm thick USG Boral Standard Plasterboard This

includes of USG Boral Thundersteel Perimeter Channel

(0.50mm thick having one flange of 20mm and another flange

of 30mm and a web of 28mm) screw fixed to brick

wall/partition with the help of approved screws at 600mm

centers. Then suspending of USG Boral Thundersteel

Intermediate channel (45mm x 0.90mm thick with two

flanges of 15mm each) from the soffit at 1220mm centers

with of USG Boral Thundersteel Ceiling Angle

(25x10mmx0.50mm thick) fixed to RCC Slab with of USG

Boral Soffit Cleat (37x27x25x1.6mm thick) and 8mm dia

40mm long Anchor Fastener @ 600mm Centers, respectively.

USG Boral Thundersteel Ceiling Section (having web of

mm and two flanges of 27mm each) are then fixed to the of

USG Boral Thundersteel Intermediate channel with the help

of connecting clip (2.6mm Dia) and in perpendicular

direction to the USG Boral Thundersteel intermediate channel

at 457mm centers. USG Boral Thundersteel profiles are

rolled with AZ Steel (150 GSM & 310 MPa Yield Strength)

199 CEMENT SHEET CEILING

Providing and fixing of Cement sheet ceiling using

aluminium channel & pipe, screws etc. complete with all

material, labour with all lead, lift and transport. and finished

by approved shade of plastic paint (Basic Rate for 8 mm plain

cement sheet : 35 rs./sqft.)and finished and complete the work

satisfactorily as per instruction of architect or Engineer-in

charge And as per " Architecture" detail.

Providing and filling Epoxy grout of approved or suggested

brand by consultant / Engineer in charge in 4mm to 6mm

thick tiles joint including spacer with cleaning of joint by

vacuum or blower etc

Applying polymer modify mortar in proportion at 1:2(one part

cement: 2 part white sand(sweet water) with chemical(SBR)

dosage of minimum 5 litre pe bag of cement. Also apply

201 bonding agent prior to polymer modify mortar in proportion

of (1:1)(1 part SBR : 1 part cement) using Roof, MC and

Beam / Columns 0.00 1830.00 S.M.

Ceiling 0.00 1830.00 S.M.

Crack Repairs:-Crack filling using fiber reinforced polymer

modified mortar after openning crack in "V" grove, Making

Surface dust free, with a bond coat of polymer as per the data

sheet for crack repairing cracks less than 8mm

Cutting out cracks of roof terrace to V- section

203 cleaning out, wetting , grouting with cement and sand 5.00 65.23 Rmt

slurry 1:3 (1-cement 3-sand )

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing & fixing G.i mesh 25X25X3mm used for celling

204 repair fixed with celling rebar column as per directed by 5.00 546.00 S.M.

enginner incharge rate excluding the rebar cost .

Providing and filling the expansion joint by polymer confirm

to BS4254-1983 as per required shade and specification by

making groove of 50 mmx12.5mm lather by cutting or by

repairing groove and removing mortar dropor anyother

foreign materials including applying primer and filling

required size (over size of joint PU foam etc. complete.)

Providing and fixing rebar of following diameter using

chemical grout of Swanchore/Hilti/Fischer or equivalent

make including cost of all equipments, tools, material, labour,

etc. Standard procedure as mentioned in manufacturer's

specifications shall be strictly followed, which shall be

submitted and got approved from the authority prior to start of

work. The rate shall also include cost of drilling of hole of

205 required diameter and depth as

mentioned in manufacturer's specification, cleaning the hole

with required air blower and other necessary tools and

tackles, positioning, providing and grouting chemical, allied

fixtures and fasteners, etc. but excluding the cost of

reinforcing bar etc. complete. Item includes necessary

scaffolding, staging, labour, tools and equipments, etc.

complete as directed by the engineer-incharge.

(D) 16 mmm dia 5.00 190.00 No.

(E) 20 mmm dia 5.00 340.00 No.

(F) 25 mmm dia 5.00 500.00 No.

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution for termite

control treatment including labour and material consistment

with ISI specification. Using Chlordene and Chiorpurfiles

EC. As per 6131_paret-II Consentration Weight one

percent is recommended i.e. one litre 20 EC chemical

emulsion with 19 liter give 1% concrentration inclusive of

one litre chemical emulsion appication at the rate of 5 litre

chemical / Sqm of surface is recommended as per IS.

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Anti-Termite System:Providing and laying of

permanent piping technology anti-termite treatment

before flooring work by installing LLDP (Low linear

density polyethylene) tube of 8 mm O.D. & 6.4 mm

1.D. with inbuilt pressure compensation chip every

cm interval in the tube, having working pressure of

Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-clips

and nails. The LLDP pipe shall be installed at the entire

periphery of the building and at internal network of

207 building at a depth of 20 to 200 mm under floor at every 2 to 10.00 134.33 S.M.

3 mtr. c/c distance (adjusted as per building layout ) &

Ends of loop pass through a PVC elbow of minimum

mm ID at junction box of wall and floor level, entering

into a steel reinforced grooved flexible pipe of

minimum 22 mm ID leading into junction box and the

loops shall terminate in junction boxes & test every

junction during injecting chemicals for termite control

treatment. The anti termite chemical Imidacloprid 30.5%

SC mix as per IS-6313 (part III) shall be injected by the

RCC Core Cutting is about making precise, circular cuts for

creating holes of required diameters for Rehabilitation in civil

208 works. The core drilling rod is fitted with diamond pieces at

the drilling end. The core cutting machine can be used for

both horizontal and vertical hole making purposes.

Providing, supplying & placing precast RCC Woodeny

benches as per given

specifications. (Seating plank dimensions : Seating Length of

1380 mm, Seating width of the Bench : 450 mm, Seating

height of the Bench :

450 mm, Seating plank thickness : 60 mm, Total height of the

M-30 grade of Concrete using vibration compaction process.

consists of 2 Nos. L-shape base support in wooden texture

and 1 Nos. flate

back and 1 Nos. bottom plank leg thickness :90 mm, Leg

hight : 830 mm, Leg

width : 600 mm, backside plank width : 350 mm, backside

mm, backside plank thickness : 60 mm.

Bench top and back planks are treated with special

anticorrosive, water proof

coating, prevent sun, rain, light and fungal attack, as to make

surfaces glossy

and water proof.

The back rest should show as details given by SMC in

embossed at casting

Sr. S.O.R. 2023-2024 (Without GST)

No. Rate Per Amount

Providing & applying painting two coats at all floor levels on

new steel other metal surface with Epoxy paint, brushing

210 interior to give an even shade incl. cleaning the surface of all 0.00 215.00 S.M.

dirt, dust & other foreign matter etc. comp. (A) For All type

of steel Structure for all floor .

Providing & Fixing of Two Nos Dry ant Wet S.S.Decorative

211 type one DUSTBIN of 20 ltrs.With S.S. Support. 10.00 4675.00 No.

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

EXECUTIVE ENGINEER

NEW EAST (SARTHANA) ZONE

SIGNATURE OF CONTRACTOR SURAT MUNICIPAL CORPORATION