Loading
Loading…
Loading…
Tender Value
₹1.0 Cr
EMD Value
₹1.0 L
Closing Date
12 Aug 2026, 6:00 pmClosed
Deputy Municipal Commissioner
PRIMARY FIRE SAFETY SYSTEM IN TOTAL 04 NOS OF COMMUNITY HALL WHICH WERE MADE IN THE TIME OF NAGARPALIKA IN AREA OF SOUTH ZONE-B(KANAKPUR) SURAT.
330812
DMC/SZ-B/ 04/ 2026-27,Work No. 02
Open
Fire and Safety Services
Works
Surat
3 documents required · 3 mandatory
₹4,248
Commissioner, Surat Municipal Corporation
₹1.0 L
3 Aug 2026
3 Aug 2026
3 Aug 2026
12 Aug 2026
3 Aug 2026
S.O.R 2024-2025 (Without GST)
NO. DESCRIPTION QTY UNIT RATE AMOUNT
PART (I) = FIRE SAFETY SYSTEM
1 SACHIN COMMUNITY HALL
A PUMPS & CONTROL PANELS
A1 MAIN PUMP :-
HORIZONTAL CENTRIFUGAL MONOBLOCK PUMP SET,
CAPACITY @ 1250LPM AT @ 70METER HEAD, @30HP,
C.I. IMPELLER, @2900 RPM.
(MAKE:- KIRLOSHKAR / LUBI)
A2 JOCKEY PUMP :-
VERTICLE INLINE TYPE JOCKEY PUMP SET, CAPACITY @
180LPM AT @ 70 METER HEAD, @5.5HP, @2900 RPM. 1 NOS 81,506.25
(MAKE:- KIRLOSHKAR / LUBI)
A3 DIESEL PUMP :-
MECHANICAL SEAL, HORIZONTAL END SUCTION TYPE
DIESEL PUMP SET, CAPACITY @ 900LPM AT @ 60METER
HEAD, @25HP, C.I. IMPELLER, @2300 RPM.
(MAKE:- KIRLOSHKAR / LUBI)
A4 ELECTRICAL PANEL :-
COMBINED ELECTRICAL AUTO CONTROL PANEL FOR
MAIN + JOCKEY + DIESEL PUMPS WITH EARTHINGS
(MAKE:- L&T / SCHINDLER)
A5 COPPER FLEXIBLE CABLE WITH CONDUITS & FITTINGS :-
(A) 4 CORE X 6 SQ.MM. (MAIN PUMP) 20 MTRS 359.00
(B) 4 CORE X 2.5 SQ.MM. (JOCKEY PUMP) 10 MTRS 165.00
(C) 6 CORE X 1.5 SQ.MM. (DIESEL PUMP) 10 MTRS 165.00
(D) 2 CORE X 1.5 SQ.MM. (PRESSURE SWITCH) 30 MTRS 99.00
(MAKE:- POLYCAB / RR)
(NOTE:- CABLE LENGTH MAY VARRY TENTATIVE)
A6 G.I. PERFORATED CABLE TRAY :-
(NOTE:- LENGTH MAY VARRY TENTATIVE)
Providing and fixing 25mm x 5mm G.I. Strip on surface
or in recess for connections etc. as required.
B PUMP ROOM VALVES & PIPING
B1 C.I. FLANGE END BALL TYPE FOOT VALVE :-
PROVIDING AND FIXING OF C.I. FLANGE END BALL TYPE
FOOT VALVE WITH MS FLANGES, GI NUT, GI BOLT, GI
WASER & RUBBER GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- NORMEX)
(A) 150MM DIA 2 NOS 14,711.94
(B) 80MM DIA 1 NOS 8,000.00
B2 BUTTERFLY VALVE :-
PROVIDING AND FIXING OF BUTTERFLY VALVE WITH
MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER
GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / SANT)
(A) 150MM DIA 1 NOS 5,790.32
(B) 100MM DIA 2 NOS 5,200.00
(C) 65MM DIA 1 NOS 2,614.42
B3 C.I. DUAL PLATE NON-RETURN VALVE :-
PROVIDING AND FIXING OF C.I. DUAL PLATE NON-RETURN
VALVE WITH MS FLANGES, GI NUT, GI BOLT, GI WASER
& RUBBER GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / SANT)
(A) 100MM DIA 2 NOS 6,350.00
(B) 65MM DIA 1 NOS 4,640.66
(C) 150MM DIA 2 NOS 7,991.24
(D) 80MM DIA 1 NOS 4,688.96
B4 FORGED BRASS BALL VALVE :-
PROVIDING AND FIXING OF FORGED BRASS BALL VALVE
SCREWED END (SUITABLE FOR WORKING PRESSURE
(MAKE:- ZOLOTO / SANT)
(A) 25MM DIA (FOR PUMP HEADER DRAIN) 4 NOS 830.51
(B) 15MM DIA (FOR PRESSURE SWITCH) 3 NOS 728.81
B5 PRESSURE GAUGE :-
PROVIDING AND FIXING DIAL TYPE PRESSURE GAUGE
WITH ISOLATION BALL VALVE SUITABLE FOR WORKING
PRESSURE MENTIONED. COST SHALL BE INCLUSIVE OF
PROVIDING ANY SHORT PIECES, NIPPLES, ELBOWS WITH
SYPHONE TUBE ETC REQUIRED. (0-21 KG./CM2)
(MAKE:- BAUMER / H.GURU / EXCEL)
B6 PRESSURE SWITCH :-
PROVIDING, FIXING, TESTING AND COMMISSIONING OF
PRESSURE SWITCH SUITABLE FOR AUTOMATION OF
PUMP ETC REQUIRED.
(MAKE:- DANFOSS / HONEYWELL)
SUPPLY, INSTALLATION, TESTING & COMMISISONING OF
G.I. "C" CLASS PIPE AS PER IS 1239 WITH PAINTING
(1 COAT OF ZINC OXIDE PRIMER AND 2 COATS OF PO RED
PAINT), SUITABLE TYPES OF SUPPORTS, HILTI FASTENERS,
BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS,
FITTINGS SUCH AS REDUCERS, TEES, ELBOWS, FLANGES.
INCLUDING CUTTING, WELDING, FIXING IN/ON WALLS,
CEILING BY USING SUITABLE SUPPORTS ETC.
(MAKE:- ASIAN / APOLLO / JINDAL)
(A) 150MM DIA 18 MTRS 2,445.74
(B) 100MM DIA 6 MTRS 1,800.00
(C) 80MM DIA 6 MTRS 1,700.00
(D) 65MM DIA 6 MTRS 955.02
(E) 25MM DIA 6 MTRS 550.85
NOTE: - LENGTHS MAY VARRY ACCORDING TO ASSEMBLY /
LOCATION OF PUMPS.
C EXTERNAL HYDRANT & FIRE BRIGADE TANKER INLET
C1 2 WAY FIRE BRIGADE INLET : -
PROVIDING AND FIXING OF 2 WAY FIRE BRIGADE INLET
CONNECTIONS MADE OF CI BODY, 100MM DIA FLANGED
INLET WITH 2 NOS OF INBUILT SS, NRV (BODY TYPE) 1 NOS 4,745.76
WITH PVC BLANK CAP & CHAIN.
(MAKE:- AAAG / NEWAGE)
C2 BUTTERFLY VALVE :-
PROVIDING AND FIXING OF BUTTERFLY VALVE WITH
MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER
GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / SANT)
(A) 100MM DIA (FOR 2 WAY VALVE) 1 NOS 5,200.00
C3 C.I. DUAL PLATE NON-RETURN VALVE :-
PROVIDING AND FIXING OF C.I. DUAL PLATE NON-RETURN
VALVE WITH MS FLANGES, GI NUT, GI BOLT, GI WASER
& RUBBER GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / SANT)
(A) 100MM DIA (FOR 2 WAY VALVE) 1 NOS 6,350.00
SUPPLY, INSTALLATION, TESTING & COMMISISONING OF
G.I. "C" CLASS PIPE AS PER IS 1239 WITH PAINTING
(1 COAT OF ZINC OXIDE PRIMER AND 2 COATS OF PO RED
PAINT), SUITABLE TYPES OF SUPPORTS, HILTI FASTENERS,
BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS,
FITTINGS SUCH AS REDUCERS, TEES, ELBOWS, FLANGES.
INCLUDING CUTTING, WELDING, FIXING IN/ON WALLS,
CEILING BY USING SUITABLE SUPPORTS ETC.
(MAKE:- ASIAN / APOLLO / JINDAL)
(A) 100MM DIA 18 MTRS 1,800.00
NOTE: - LENGTHS MAY VARRY ACCORDING TO ASSEMBLY /
LOCATION OF PUMPS.
D PRESSURISED WET RISER SYSTEM
D1 BUTTERFLY VALVE :-
PROVIDING AND FIXING OF BUTTERFLY VALVE WITH
MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER
GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / SANT)
(A) 100MM DIA 1 NOS 5,200.00
D2 FORGED BRASS BALL VALVE :-
PROVIDING AND FIXING OF FORGED BRASS BALL VALVE
SCREWED END (SUITABLE FOR WORKING PRESSURE
(MAKE:- ZOLOTO / SANT)
(A) 25MM DIA (FOR RISER DRAIN) 1 NOS 830.51
(B) 25MM DIA (FOR AIR RELEASE VALVE) 1 NOS 830.51
(C) 20MM DIA (FOR HOSE REEL TAPPING) 1 NOS 578.03
D3 FORGED BRASS AIR RELEASE VALVE :-
PROVIDING AND FIXING OF FORGED BRASS AIR RELEASE
VALVE SCREWED END. (SUITABLE FOR WORKING
PRESSURE OF 25KG/SQ.CM.)
(MAKE:- ZOLOTO / SANT)
(A) 25MM DIA 1 NOS 1,822.03
SUPPLY, INSTALLATION, TESTING & COMMISISONING OF
G.I. "C" CLASS PIPE AS PER IS 1239 WITH PAINTING
(1 COAT OF ZINC OXIDE PRIMER AND 2 COATS OF PO RED
PAINT), SUITABLE TYPES OF SUPPORTS, HILTI FASTENERS,
BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS,
FITTINGS SUCH AS REDUCERS, TEES, ELBOWS, FLANGES.
INCLUDING CUTTING, WELDING, FIXING IN/ON WALLS,
CEILING BY USING SUITABLE SUPPORTS ETC.
(MAKE:- ASIAN / APOLLO / JINDAL)
(A) 100MM DIA 6 MTRS 1,800.00
(B) 80MM DIA (FOR HYDRANT BRANCHING) 2 MTRS 1,700.00
D5 HYDRANT VALVE :-
PROVIDING AND FIXING OF SS-304 SINGLE OUTLET
FIRE HYDRANT VALVE, HAVING 63MM FEMALE OBLIQUE
TYPE AND 80MM FLANGED INLET, AS PER IS:5290, 1 NOS 8,898.31
ISI MARKED WITH ABS BLANK CAP AND GI CHAIN.
(MAKE:- AAAG / NEWAGE)
FRP SHEETED DOUBLE DOOR HOSE BOX
D7 HOSE REEL DRUM SET :-
SUPPLYING AND INSTALLING TESTING AND COMMISSING
OF WALL MOUNTING SWINGING HOSE REEL DRUM AS
PER IS 884 AND FITTED WITH 20MM DIA X 30METER
LONG HIGH PRESSURE RUBBER HOSE PIPE WITH S.S. 1 NOS 10,593.22
SHUT OFF NOZZLE WITH NECESSARY MS BRACKET FOR
HOLDING HOSE REEL DRUM.
(MAKE :- AAAG / NEWAGE)
D8 HOSE PIPE :-
PROVIDING AND FIXING OF RRL FIRE HOSE OF 63MM
DIA X 15 METER AS PER IS:636, TYPE-A, ISI MARKED
WITH SS-304, 63MM MALE & FEMALE COUPLING AS PER 2 NOS 4,067.80
IS:903, ISI MARKED BANDED WITH COPPER WIRE.
(MAKE:- AAAG / NEWAGE)
D9 HEXAGONAL NOZZLE :-
PROVIDING AND FIXING OF SS-304, 63MM X 20MM
SHORT BRANCH PIPE WITH NOZZLE AS PER IS:903,
(MAKE:- AAAG / NEWAGE)
E1 50% MAP ABC TYPE FIRE EXTINGUISHER :-
(A) 6KG CAPACITY 4 NOS 3,059.32
(MAKE:- SAFEX / KANEX / V-SAFE)
E2 CO2 TYPE FIRE EXTINGUISHER :-
(A) 4.5KG CAPACITY 4 NOS 8,127.12
(MAKE:- SAFEX / KANEX / V-SAFE)
E3 MODULAR TYPE AUTOMATIC FIRE EXTINGUISHER :-
(A) 5KG CAPACITY (FOR METER ROOM) 2 NOS 2,656.50
(MAKE:- SAFEX / KANEX / V-SAFE)
F FIRE ALARM SYSTEM
F1 FIRE ALARM PANEL :-
2 LOOP ADDRESSABLE TYPE FIRE ALARM PANEL WITH
BATTERY BACKUP. 1 NOS 95,996.25
(MAKE:- MORLEY BY HONEYWELL)
F2 MANUAL CALL POINT :-
ADDRESSABLE TYPE MANUAL CALL POINT WITH BASE.
(MAKE:- MORLEY BY HONEYWELL)
F3 SOUNDER STROBE :-
ADDRESSABLE TYPE SOUNDER STROBE WITH BASE.
(MAKE:- MORLEY BY HONEYWELL)
F4 SMOKE DETECTOR :-
ADDRESSABLE TYPE SMOKE DETECTOR WITH BASE.
(MAKE:- MORLEY BY HONEYWELL)
F5 FAULT ISOLATOR :-
ADDRESSABLE TYPE FAULT ISOLATOR WITH BASE.
(MAKE:- MORLEY BY HONEYWELL)
F6 COPPER ARMORED CABLE :-
(A) 2 CORE X 1.5 SQ.MM. 500 MTRS 101.69
(MAKE:- POLYCAB/RR CABLES/KEI)
(NOTE:- CABLE LENGTH MAY VARRY TENTATIVE)
NIGHT GLOVE SIGNAGES ON 3MM PVC FOAM SHEET.
(A) FIRE EXTINGUISHER (5 X 5 = 25 SQ.INCH X 4 NOS) 100 SQ. INCH 6.78
(B) FIRE HOSE REEL (5 X 5 = 25 SQ.INCH X 1 NOS) 25 SQ. INCH 6.78
(C) EMERGENCY EXIT (12 X 4 = 48 SQ.INCH X 1 NOS) 48 SQ. INCH 6.78
(D) FIRE PUMP (12 X 4 = 48 SQ.INCH X 3 NOS) 144 SQ. INCH 6.78
(E) FIRE PUMP PANEL (12 X 4 = 48 SQ.INCH X 1 NOS) 48 SQ. INCH 6.78
(F) MANUAL CALL POINT (5 X 5 = 25 SQ.INCH X 3 NOS) 75 SQ. INCH 6.78
(G) HOOTER (5 X 5 = 25 SQ.INCH X 3 NOS) 75 SQ. INCH 6.78
(H) FIRE ALARM PANEL (12 X 4 = 48 SQ.INCH X 1 NOS) 48 SQ. INCH 6.78
ANNUAL MAINTENANCE CHARGES :-
PROVIDING COMPLETE DEMOSTRATION OF COMPLETE
FIRE SYSTEM & OBTAINING FIRE CERTIFICATE FROM FIRE
DEPARTMENT ALONG WITH FORM-16 (AMC CONTRACT
START AFTER 1ST YEAR OF INSTALLATION.)
SCOPE OF WORK :
# AMC CONTRACT IS FOR QUATERLY VISIT.
# OILING & SERVICING OF COMPLETE FIRE SYSTEM.
# DEMOSTRATION & TRAINING TO COMPLETE STAFF
# REPLACEMENT OF DEFECTIVE PARTS ON CHARGEABLE
BASIS AFTER 1 YEAR.
NOTE :- EVERY YEAR IT SHOULD BE 7% ON TOTAL
TOTAL OF GROUPS (A+B+C+D+E+F+G+H) WITHOUT GST
2 KANSAD HALPATIWAS COMMUNITY HALL
A PUMPS & CONTROL PANELS
A1 MAIN PUMP :-
MONOBLOCK PUMP SET CAPACITY @ 450LPM AT @
METER HEAD, @10HP, RPM = 2900RPM
MODEL NO. :- MB1.6550.10.3.00
(MAKE:- KIRLOSHKAR / LUBI / KSB)
A2 ELECTRICAL PANEL :-
ELECTRICAL AUTO CONTROL PANEL FOR MAIN PUMP
WITH EARTHINGS AND SIREN. 1 NOS 42,000.00
(MAKE:- L&T / C & S)
A3 COPPER FLEXIBLE CABLE :-
(A) 4 CORE X 6 SQ.MM. 70 MTRS 359.00
(B) 2 CORE X 1.5 SQ.MM. 70 MTRS 99.00
(MAKE:- POLYCAB / RR)
(NOTE:- CABLE LENGTH MAY VARRY TENTATIVE)
Providing and fixing 25mm x 5mm G.I. Strip on surface
or in recess for connections etc. as required.
B PUMP ROOM VALVES & PIPING
B1 C.I. "Y" TYPE STRAINER :-
PROVIDING AND FIXING OF C.I. "Y" TYPE STRAINER WITH
MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER
GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / AUDCO)
(A) 50MM DIA 1 NOS 8,000.00
B2 BUTTERFLY VALVE :-
PROVIDING AND FIXING OF BUTTERFLY VALVE WITH
MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER
GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / AUDCO)
(A) 50MM DIA 2 NOS 4,194.92
B3 C.I. DUAL PLATE NON-RETURN VALVE :-
PROVIDING AND FIXING OF C.I. DUAL PLATE NON-RETURN
VALVE WITH MS FLANGES, GI NUT, GI BOLT, GI WASER
& RUBBER GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / AUDCO)
(A) 50MM DIA 1 NOS 4,406.78
B4 FORGED BRASS BALL VALVE :-
PROVIDING AND FIXING OF FORGED BRASS BALL VALVE
SCREWED END (SUITABLE FOR WORKING PRESSURE
(MAKE:- ZOLOTO / HONEYWELL / SANT)
(A) 15MM DIA 2 NOS 728.81
B5 PRESSURE GAUGE :-
PROVIDING AND FIXING DIAL TYPE PRESSURE GAUGE
WITH ISOLATION BALL VALVE SUITABLE FOR WORKING
PRESSURE MENTIONED. COST SHALL BE INCLUSIVE OF
PROVIDING ANY SHORT PIECES, NIPPLES, ELBOWS ETC
REQUIRED. (0-21 KG./CM2)
(MAKE:- BAUMER / H.GURU)
B6 PRESSURE SWITCH :-
PROVIDING, FIXING, TESTING AND COMMISSIONING OF
PRESSURE SWITCH SUITABLE FOR AUTOMATION OF
PUMP AS SPECIFIED IPS100.
(MAKE:- DANFOSS / HONEYWELL)
SUPPLY, INSTALLATION, TESTING & COMMISISONING OF
G.I. "C" CLASS PIPE AS PER IS 1239 WITH PAINTING
SUITABLE TYPES OF SUPPORTS, HILTI FASTENERS,
BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS,
FITTINGS SUCH AS REDUCERS, TEES, ELBOWS, FLANGES.
INCLUDING CUTTING, WELDING, FIXING IN/ON WALLS,
CEILING BY USING SUITABLE SUPPORTS ETC. AS PER
(MAKE:- ASIAN / JINDAL)
(A) 50MM DIA 4 MTRS 949.15
NOTE: - LENGTHS MAY VARRY ACCORDING TO ASSEMBLY /
LOCATION OF PUMPS.
C1 FORGED BRASS BALL VALVE :-
PROVIDING AND FIXING OF FORGED BRASS BALL VALVE
SCREWED END (SUITABLE FOR WORKING PRESSURE
(MAKE:- ZOLOTO / HONEYWELL / SANT)
(A) 25MM DIA (FOR RISER DRAIN) 1 NOS 830.51
(B) 25MM DIA (FOR AIR RELEASE VALVE) 1 NOS 830.51
C2 FORGED BRASS AIR RELEASE VALVE :-
PROVIDING AND FIXING OF FORGED BRASS AIR RELEASE
VALVE SCREWED END. (SUITABLE FOR WORKING
PRESSURE OF 25KG/SQ.CM.)
(MAKE:- ZOLOTO / SANT)
(A) 25MM DIA 1 NOS 1,822.03
SUPPLY, INSTALLATION, TESTING & COMMISISONING OF
G.I. "C" CLASS PIPE AS PER IS 1239 WITH PAINTING
SUITABLE TYPES OF SUPPORTS, HILTI FASTENERS,
BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS,
FITTINGS SUCH AS REDUCERS, TEES, ELBOWS, FLANGES.
INCLUDING CUTTING, WELDING, FIXING IN/ON WALLS,
CEILING BY USING SUITABLE SUPPORTS ETC.
(MAKE:- ASIAN / JINDAL)
(A) 50MM DIA 30 MTRS 949.15
C4 HOSE REEL DRUM SET :-
SUPPLYING AND INSTALLING TESTING AND COMMISSING
OF WALL MOUNTING SWINGING HOSE REEL DRUM AS
PER IS 884 AND FITTED WITH 20MM DIA X 30METER
LONG HIGH PRESSURE RUBBER HOSE PIPE WITH G.M. 1 NOS 10,593.22
SHUT OFF NOZZLE WITH NECESSARY MS BRACKET FOR
HOLDING HOSE REEL DRUM. (WITH BALL VALVE)
(MAKE:- NEWAGE / AAAG / SWATI)
C5 ABC TYPE FIRE EXTINGUISHER :-
(A) 6KG CAPACITY 2 NOS 3,059.32
(MAKE:- SAFEX / KANEX)
C6 CO2 TYPE FIRE EXTINGUISHER :-
(A) 4.5KG CAPACITY 2 NOS 8,127.12
(MAKE:- SAFEX / KANEX)
PAINTING OF THE PIPES WITH 1 COAT OF ZINC OXIDE
AND 2 COATS OF P.O./SIGNAL RED COLOUR.
(A) 50MM DIA PIPE 34 MTRS 42.37
(MAKE:- ASIAN / BERGER)
D FIRE ALARM SYSTEM
D1 FIRE ALARM PANEL :-
2 ZONE CONVENTIONAL TYPE FIRE ALARM PANEL
WITH BATTERY BACKUP 1 NOS 21,355.93
(MAKE:- RAVEL / SYSTEM SENSOR)
CONVENTIONAL TYPE MANUAL CALL POINT WITH BASE.
(MAKE:- RAVEL / SYSTEM SENSOR)
CONVENTIONAL TYPE HOOTER WITH BASE.
(MAKE:- RAVEL / SYSTEM SENSOR)
D4 SMOKE DETECTOR :-
CONVENTIONAL TYPE SMOKE DETECTOR WITH BASE.
(MAKE:- RAVEL / SYSTEM SENSOR)
D5 COPPER ARMORED CABLE :-
(A) 2 CORE X 1.5 SQ.MM. 100 MTRS 101.69
(MAKE:- POLYCAB / RR)
(NOTE:- CABLE LENGTH MAY VARRY TENTATIVE)
NIGHT GLOVE SIGNAGES ON 3MM PVC FOAM SHEET.
(A) FIRE EXTINGUISHER (5 X 5 = 25 SQ.INCH X 2 NOS) 50 SQ. INCH 6.78
(B) FIRE HOSE REEL (5 X 5 = 25 SQ.INCH X 1 NOS) 25 SQ. INCH 6.78
(C) EMERGENCY EXIT (12 X 4 = 48 SQ.INCH X 2 NOS) 96 SQ. INCH 6.78
(D) FIRE PUMP (12 X 4 = 48 SQ.INCH X 1 NOS) 48 SQ. INCH 6.78
(E) FIRE PUMP PANEL (12 X 4 = 48 SQ.INCH X 1 NOS) 48 SQ. INCH 6.78
(F) MANUAL CALL POINT (5 X 5 = 25 SQ.INCH X 2 NOS) 50 SQ. INCH 6.78
(G) HOOTER (5 X 5 = 25 SQ.INCH X 2 NOS) 50 SQ. INCH 6.78
(H) FIRE ALARM PANEL (12 X 4 = 48 SQ.INCH X 1 NOS) 48 SQ. INCH 6.78
F ANNUAL MAINTENANCE CHARGES
F1 ANNUAL MAINTENANCE CHARGES :- A TO G
PROVIDING COMPLETE DEMOSTRATION OF COMPLETE
FIRE SYSTEM & OBTAINING FIRE CERTIFICATE FROM FIRE
DEPARTMENT ALONG WITH FORM-16 (AMC CONTRACT
START AFTER 1ST YEAR OF INSTALLATION.)
SCOPE OF WORK :
# AMC CONTRACT IS FOR QUATERLY VISIT.
# OILING & SERVICING OF COMPLETE FIRE SYSTEM.
# DEMOSTRATION & TRAINING TO COMPLETE STAFF
# REPLACEMENT OF DEFECTIVE PARTS ON CHARGEABLE
BASIS AFTER 1 YEAR.
NOTE :- EVERY YEAR IT SHOULD BE 7% ON TOTAL
TOTAL OF GROUPS (A+B+C+D+E+F) WITHOUT GST
3 KANSAD COMMUNITY HALL
A PUMPS & CONTROL PANELS
A1 MAIN PUMP :-
HORIZONTAL CENTRIFUGAL MONOBLOCK PUMP SET,
CAPACITY @ 1250LPM AT @ 70METER HEAD, @30HP,
C.I. IMPELLER, @2900 RPM.
(MAKE:- KIRLOSHKAR / LUBI)
A2 JOCKEY PUMP :-
VERTICLE INLINE TYPE JOCKEY PUMP SET, CAPACITY @
180LPM AT @ 70 METER HEAD, @5.5HP, @2900 RPM. 1 NOS 81,506.25
(MAKE:- KIRLOSHKAR / LUBI)
A3 DIESEL PUMP :-
MECHANICAL SEAL, HORIZONTAL END SUCTION TYPE
DIESEL PUMP SET, CAPACITY @ 900LPM AT @ 60METER
HEAD, @25HP, C.I. IMPELLER, @2300 RPM.
(MAKE:- KIRLOSHKAR / LUBI)
A4 ELECTRICAL PANEL :-
COMBINED ELECTRICAL AUTO CONTROL PANEL FOR
MAIN + JOCKEY + DIESEL PUMPS WITH EARTHINGS
(MAKE:- L&T / SCHINDLER)
A5 COPPER FLEXIBLE CABLE WITH CONDUITS & FITTINGS :-
(A) 4 CORE X 6 SQ.MM. (MAIN PUMP) 20 MTRS 359.00
(B) 4 CORE X 2.5 SQ.MM. (JOCKEY PUMP) 10 MTRS 165.00
(C) 6 CORE X 1.5 SQ.MM. (DIESEL PUMP) 10 MTRS 165.00
(D) 2 CORE X 1.5 SQ.MM. (PRESSURE SWITCH) 30 MTRS 99.00
(MAKE:- POLYCAB / RR)
(NOTE:- CABLE LENGTH MAY VARRY TENTATIVE)
A6 G.I. PERFORATED CABLE TRAY :-
(NOTE:- LENGTH MAY VARRY TENTATIVE)
Providing and fixing 25mm x 5mm G.I. Strip on surface
or in recess for connections etc. as required.
B PUMP ROOM VALVES & PIPING
B1 C.I. FLANGE END BALL TYPE FOOT VALVE :-
PROVIDING AND FIXING OF C.I. FLANGE END BALL TYPE
FOOT VALVE WITH MS FLANGES, GI NUT, GI BOLT, GI
WASER & RUBBER GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- NORMEX)
(A) 150MM DIA 2 NOS 14,711.94
(B) 80MM DIA 1 NOS 8,000.00
B2 BUTTERFLY VALVE :-
PROVIDING AND FIXING OF BUTTERFLY VALVE WITH
MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER
GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / SANT)
(A) 150MM DIA 1 NOS 5,790.32
(B) 100MM DIA 2 NOS 5,200.00
(C) 65MM DIA 1 NOS 2,614.42
B3 C.I. DUAL PLATE NON-RETURN VALVE :-
PROVIDING AND FIXING OF C.I. DUAL PLATE NON-RETURN
VALVE WITH MS FLANGES, GI NUT, GI BOLT, GI WASER
& RUBBER GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / SANT)
(A) 100MM DIA 2 NOS 6,350.00
(B) 65MM DIA 1 NOS 4,640.66
(C) 150MM DIA 2 NOS 7,991.24
(D) 80MM DIA 1 NOS 4,688.96
B4 FORGED BRASS BALL VALVE :-
PROVIDING AND FIXING OF FORGED BRASS BALL VALVE
SCREWED END (SUITABLE FOR WORKING PRESSURE
(MAKE:- ZOLOTO / SANT)
(A) 25MM DIA (FOR PUMP HEADER DRAIN) 4 NOS 830.51
(B) 15MM DIA (FOR PRESSURE SWITCH) 3 NOS 728.81
B5 PRESSURE GAUGE :-
PROVIDING AND FIXING DIAL TYPE PRESSURE GAUGE
WITH ISOLATION BALL VALVE SUITABLE FOR WORKING
PRESSURE MENTIONED. COST SHALL BE INCLUSIVE OF
PROVIDING ANY SHORT PIECES, NIPPLES, ELBOWS WITH
SYPHONE TUBE ETC REQUIRED. (0-21 KG./CM2)
(MAKE:- BAUMER / H.GURU / EXCEL)
B6 PRESSURE SWITCH :-
PROVIDING, FIXING, TESTING AND COMMISSIONING OF
PRESSURE SWITCH SUITABLE FOR AUTOMATION OF
PUMP ETC REQUIRED.
(MAKE:- DANFOSS / HONEYWELL)
SUPPLY, INSTALLATION, TESTING & COMMISISONING OF
G.I. "C" CLASS PIPE AS PER IS 1239 WITH PAINTING
(1 COAT OF ZINC OXIDE PRIMER AND 2 COATS OF PO RED
PAINT), SUITABLE TYPES OF SUPPORTS, HILTI FASTENERS,
BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS,
FITTINGS SUCH AS REDUCERS, TEES, ELBOWS, FLANGES.
INCLUDING CUTTING, WELDING, FIXING IN/ON WALLS,
CEILING BY USING SUITABLE SUPPORTS ETC.
(MAKE:- ASIAN / APOLLO / JINDAL)
(A) 150MM DIA 18 MTRS 2,445.74
(B) 100MM DIA 6 MTRS 1,800.00
(C) 80MM DIA 6 MTRS 1,700.00
(D) 65MM DIA 6 MTRS 955.02
(E) 25MM DIA 6 MTRS 550.85
NOTE: - LENGTHS MAY VARRY ACCORDING TO ASSEMBLY /
LOCATION OF PUMPS.
C EXTERNAL HYDRANT & FIRE BRIGADE TANKER INLET
C1 2 WAY FIRE BRIGADE INLET : -
PROVIDING AND FIXING OF 2 WAY FIRE BRIGADE INLET
CONNECTIONS MADE OF CI BODY, 100MM DIA FLANGED
INLET WITH 2 NOS OF INBUILT SS, NRV (BODY TYPE) 1 NOS 4,745.76
WITH PVC BLANK CAP & CHAIN.
(MAKE:- AAAG / NEWAGE)
C2 BUTTERFLY VALVE :-
PROVIDING AND FIXING OF BUTTERFLY VALVE WITH
MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER
GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / SANT)
(A) 100MM DIA (FOR 2 WAY VALVE) 1 NOS 5,200.00
C3 C.I. DUAL PLATE NON-RETURN VALVE :-
PROVIDING AND FIXING OF C.I. DUAL PLATE NON-RETURN
VALVE WITH MS FLANGES, GI NUT, GI BOLT, GI WASER
& RUBBER GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / SANT)
(A) 100MM DIA (FOR 2 WAY VALVE) 1 NOS 6,350.00
SUPPLY, INSTALLATION, TESTING & COMMISISONING OF
G.I. "C" CLASS PIPE AS PER IS 1239 WITH PAINTING
(1 COAT OF ZINC OXIDE PRIMER AND 2 COATS OF PO RED
PAINT), SUITABLE TYPES OF SUPPORTS, HILTI FASTENERS,
BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS,
FITTINGS SUCH AS REDUCERS, TEES, ELBOWS, FLANGES.
INCLUDING CUTTING, WELDING, FIXING IN/ON WALLS,
CEILING BY USING SUITABLE SUPPORTS ETC.
(MAKE:- ASIAN / APOLLO / JINDAL)
(A) 100MM DIA 24 MTRS 1,800.00
NOTE: - LENGTHS MAY VARRY ACCORDING TO ASSEMBLY /
LOCATION OF PUMPS.
D PRESSURISED WET RISER SYSTEM
D1 BUTTERFLY VALVE :-
PROVIDING AND FIXING OF BUTTERFLY VALVE WITH
MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER
GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / SANT)
(A) 100MM DIA 1 NOS 5,200.00
D2 FORGED BRASS BALL VALVE :-
PROVIDING AND FIXING OF FORGED BRASS BALL VALVE
SCREWED END (SUITABLE FOR WORKING PRESSURE
(MAKE:- ZOLOTO / SANT)
(A) 25MM DIA (FOR RISER DRAIN) 1 NOS 830.51
(B) 25MM DIA (FOR AIR RELEASE VALVE) 1 NOS 830.51
(C) 20MM DIA (FOR HOSE REEL TAPPING) 2 NOS 578.03
D3 FORGED BRASS AIR RELEASE VALVE :-
PROVIDING AND FIXING OF FORGED BRASS AIR RELEASE
VALVE SCREWED END. (SUITABLE FOR WORKING
PRESSURE OF 25KG/SQ.CM.)
(MAKE:- ZOLOTO / SANT)
(A) 25MM DIA 1 NOS 1,822.03
SUPPLY, INSTALLATION, TESTING & COMMISISONING OF
G.I. "C" CLASS PIPE AS PER IS 1239 WITH PAINTING
(1 COAT OF ZINC OXIDE PRIMER AND 2 COATS OF PO RED
PAINT), SUITABLE TYPES OF SUPPORTS, HILTI FASTENERS,
BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS,
FITTINGS SUCH AS REDUCERS, TEES, ELBOWS, FLANGES.
INCLUDING CUTTING, WELDING, FIXING IN/ON WALLS,
CEILING BY USING SUITABLE SUPPORTS ETC.
(MAKE:- ASIAN / APOLLO / JINDAL)
(A) 100MM DIA 12 MTRS 1,800.00
(B) 80MM DIA (FOR HYDRANT BRANCHING) 2 MTRS 1,700.00
D5 HYDRANT VALVE :-
PROVIDING AND FIXING OF SS-304 SINGLE OUTLET
FIRE HYDRANT VALVE, HAVING 63MM FEMALE OBLIQUE
TYPE AND 80MM FLANGED INLET, AS PER IS:5290, 2 NOS 8,898.31
ISI MARKED WITH ABS BLANK CAP AND GI CHAIN.
(MAKE:- AAAG / NEWAGE)
FRP SHEETED DOUBLE DOOR HOSE BOX
D7 HOSE REEL DRUM SET :-
SUPPLYING AND INSTALLING TESTING AND COMMISSING
OF WALL MOUNTING SWINGING HOSE REEL DRUM AS
PER IS 884 AND FITTED WITH 20MM DIA X 30METER
LONG HIGH PRESSURE RUBBER HOSE PIPE WITH S.S. 2 NOS 10,593.22
SHUT OFF NOZZLE WITH NECESSARY MS BRACKET FOR
HOLDING HOSE REEL DRUM.
(MAKE :- AAAG / NEWAGE)
D8 HOSE PIPE :-
PROVIDING AND FIXING OF RRL FIRE HOSE OF 63MM
DIA X 15 METER AS PER IS:636, TYPE-A, ISI MARKED
WITH SS-304, 63MM MALE & FEMALE COUPLING AS PER 4 NOS 4,067.80
IS:903, ISI MARKED BANDED WITH COPPER WIRE.
(MAKE:- AAAG / NEWAGE)
D9 HEXAGONAL NOZZLE :-
PROVIDING AND FIXING OF SS-304, 63MM X 20MM
SHORT BRANCH PIPE WITH NOZZLE AS PER IS:903,
(MAKE:- AAAG / NEWAGE)
E1 50% MAP ABC TYPE FIRE EXTINGUISHER :-
(A) 6KG CAPACITY 8 NOS 3,059.32
(MAKE:- SAFEX / KANEX / V-SAFE)
E2 CO2 TYPE FIRE EXTINGUISHER :-
(A) 4.5KG CAPACITY 8 NOS 8,127.12
(MAKE:- SAFEX / KANEX / V-SAFE)
E3 MODULAR TYPE AUTOMATIC FIRE EXTINGUISHER :-
(A) 5KG CAPACITY (FOR METER ROOM) 2 NOS 2,656.50
(MAKE:- SAFEX / KANEX / V-SAFE)
F FIRE ALARM SYSTEM
F1 FIRE ALARM PANEL :-
2 LOOP ADDRESSABLE TYPE FIRE ALARM PANEL WITH
BATTERY BACKUP. 1 NOS 95,996.25
(MAKE:- MORLEY BY HONEYWELL)
F2 MANUAL CALL POINT :-
ADDRESSABLE TYPE MANUAL CALL POINT WITH BASE.
(MAKE:- MORLEY BY HONEYWELL)
F3 SOUNDER STROBE :-
ADDRESSABLE TYPE SOUNDER STROBE WITH BASE.
(MAKE:- MORLEY BY HONEYWELL)
F4 SMOKE DETECTOR :-
ADDRESSABLE TYPE SMOKE DETECTOR WITH BASE.
(MAKE:- MORLEY BY HONEYWELL)
F5 FAULT ISOLATOR :-
ADDRESSABLE TYPE FAULT ISOLATOR WITH BASE.
(MAKE:- MORLEY BY HONEYWELL)
F6 COPPER ARMORED CABLE :-
(A) 2 CORE X 1.5 SQ.MM. 1500 MTRS 101.69
(MAKE:- POLYCAB/RR CABLES/KEI)
(NOTE:- CABLE LENGTH MAY VARRY TENTATIVE)
NIGHT GLOVE SIGNAGES ON 3MM PVC FOAM SHEET.
(A) FIRE EXTINGUISHER (5 X 5 = 25 SQ.INCH X 8 NOS) 200 SQ. INCH 6.78
(B) FIRE HOSE REEL (5 X 5 = 25 SQ.INCH X 2 NOS) 50 SQ. INCH 6.78
(C) EMERGENCY EXIT (12 X 4 = 48 SQ.INCH X 2 NOS) 96 SQ. INCH 6.78
(D) FIRE PUMP (12 X 4 = 48 SQ.INCH X 3 NOS) 144 SQ. INCH 6.78
(E) FIRE PUMP PANEL (12 X 4 = 48 SQ.INCH X 1 NOS) 48 SQ. INCH 6.78
(F) MANUAL CALL POINT (5 X 5 = 25 SQ.INCH X 4 NOS) 100 SQ. INCH 6.78
(G) HOOTER (5 X 5 = 25 SQ.INCH X 4 NOS) 100 SQ. INCH 6.78
(H) FIRE ALARM PANEL (12 X 4 = 48 SQ.INCH X 1 NOS) 48 SQ. INCH 6.78
H1 ANNUAL MAINTENANCE CHARGES :- A TO G
PROVIDING COMPLETE DEMOSTRATION OF COMPLETE
FIRE SYSTEM & OBTAINING FIRE CERTIFICATE FROM FIRE
DEPARTMENT ALONG WITH FORM-16 (AMC CONTRACT
START AFTER 1ST YEAR OF INSTALLATION.)
SCOPE OF WORK :
# AMC CONTRACT IS FOR QUATERLY VISIT.
# OILING & SERVICING OF COMPLETE FIRE SYSTEM.
# DEMOSTRATION & TRAINING TO COMPLETE STAFF
# REPLACEMENT OF DEFECTIVE PARTS ON CHARGEABLE
BASIS AFTER 1 YEAR.
NOTE :- EVERY YEAR IT SHOULD BE 7% ON TOTAL
TOTAL OF GROUPS (A+B+C+D+E+F+G+H) WITHOUT GST
4 KANAKPUR COMMUNITY HALL
A PUMPS & CONTROL PANELS
A1 MAIN PUMP :-
HORIZONTAL CENTRIFUGAL MONOBLOCK PUMP SET,
CAPACITY @ 1250LPM AT @ 70METER HEAD, @30HP,
C.I. IMPELLER, @2900 RPM.
(MAKE:- KIRLOSHKAR / LUBI)
A2 JOCKEY PUMP :-
VERTICLE INLINE TYPE JOCKEY PUMP SET, CAPACITY @
180LPM AT @ 70 METER HEAD, @5.5HP, @2900 RPM. 1 NOS 81,506.25
(MAKE:- KIRLOSHKAR / LUBI)
A3 DIESEL PUMP :-
MECHANICAL SEAL, HORIZONTAL END SUCTION TYPE
DIESEL PUMP SET, CAPACITY @ 900LPM AT @ 60METER
HEAD, @25HP, C.I. IMPELLER, @2300 RPM.
(MAKE:- KIRLOSHKAR / LUBI)
A4 ELECTRICAL PANEL :-
COMBINED ELECTRICAL AUTO CONTROL PANEL FOR
MAIN + JOCKEY + DIESEL PUMPS WITH EARTHINGS
(MAKE:- L&T / SCHINDLER)
A5 COPPER FLEXIBLE CABLE WITH CONDUITS & FITTINGS :-
(A) 4 CORE X 6 SQ.MM. (MAIN PUMP) 20 MTRS 359.00
(B) 4 CORE X 2.5 SQ.MM. (JOCKEY PUMP) 10 MTRS 165.00
(C) 6 CORE X 1.5 SQ.MM. (DIESEL PUMP) 10 MTRS 165.00
(D) 2 CORE X 1.5 SQ.MM. (PRESSURE SWITCH) 30 MTRS 99.00
(MAKE:- POLYCAB / RR)
(NOTE:- CABLE LENGTH MAY VARRY TENTATIVE)
A6 G.I. PERFORATED CABLE TRAY :-
(NOTE:- LENGTH MAY VARRY TENTATIVE)
Providing and fixing 25mm x 5mm G.I. Strip on surface
or in recess for connections etc. as required.
B PUMP ROOM VALVES & PIPING
B1 C.I. FLANGE END BALL TYPE FOOT VALVE :-
PROVIDING AND FIXING OF C.I. FLANGE END BALL TYPE
FOOT VALVE WITH MS FLANGES, GI NUT, GI BOLT, GI
WASER & RUBBER GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- NORMEX)
(A) 150MM DIA 2 NOS 14,711.94
(B) 80MM DIA 1 NOS 8,000.00
B2 BUTTERFLY VALVE :-
PROVIDING AND FIXING OF BUTTERFLY VALVE WITH
MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER
GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / SANT)
(A) 150MM DIA 1 NOS 5,790.32
(B) 100MM DIA 2 NOS 5,200.00
(C) 65MM DIA 1 NOS 2,614.42
B3 C.I. DUAL PLATE NON-RETURN VALVE :-
PROVIDING AND FIXING OF C.I. DUAL PLATE NON-RETURN
VALVE WITH MS FLANGES, GI NUT, GI BOLT, GI WASER
& RUBBER GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / SANT)
(A) 100MM DIA 2 NOS 6,350.00
(B) 65MM DIA 1 NOS 4,640.66
(C) 150MM DIA 2 NOS 7,991.24
(D) 80MM DIA 1 NOS 4,688.96
B4 FORGED BRASS BALL VALVE :-
PROVIDING AND FIXING OF FORGED BRASS BALL VALVE
SCREWED END (SUITABLE FOR WORKING PRESSURE
(MAKE:- ZOLOTO / SANT)
(A) 25MM DIA (FOR PUMP HEADER DRAIN) 4 NOS 830.51
(B) 15MM DIA (FOR PRESSURE SWITCH) 3 NOS 728.81
B5 PRESSURE GAUGE :-
PROVIDING AND FIXING DIAL TYPE PRESSURE GAUGE
WITH ISOLATION BALL VALVE SUITABLE FOR WORKING
PRESSURE MENTIONED. COST SHALL BE INCLUSIVE OF
PROVIDING ANY SHORT PIECES, NIPPLES, ELBOWS WITH
SYPHONE TUBE ETC REQUIRED. (0-21 KG./CM2)
(MAKE:- BAUMER / H.GURU / EXCEL)
B6 PRESSURE SWITCH :-
PROVIDING, FIXING, TESTING AND COMMISSIONING OF
PRESSURE SWITCH SUITABLE FOR AUTOMATION OF
PUMP ETC REQUIRED.
(MAKE:- DANFOSS / HONEYWELL)
SUPPLY, INSTALLATION, TESTING & COMMISISONING OF
G.I. "C" CLASS PIPE AS PER IS 1239 WITH PAINTING
(1 COAT OF ZINC OXIDE PRIMER AND 2 COATS OF PO RED
PAINT), SUITABLE TYPES OF SUPPORTS, HILTI FASTENERS,
BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS,
FITTINGS SUCH AS REDUCERS, TEES, ELBOWS, FLANGES.
INCLUDING CUTTING, WELDING, FIXING IN/ON WALLS,
CEILING BY USING SUITABLE SUPPORTS ETC.
(MAKE:- ASIAN / APOLLO / JINDAL)
(A) 150MM DIA 18 MTRS 2,445.74
(B) 100MM DIA 6 MTRS 1,800.00
(C) 80MM DIA 6 MTRS 1,700.00
(D) 65MM DIA 6 MTRS 955.02
(E) 25MM DIA 6 MTRS 550.85
NOTE: - LENGTHS MAY VARRY ACCORDING TO ASSEMBLY /
LOCATION OF PUMPS.
C EXTERNAL HYDRANT & FIRE BRIGADE TANKER INLET
C1 2 WAY FIRE BRIGADE INLET : -
PROVIDING AND FIXING OF 2 WAY FIRE BRIGADE INLET
CONNECTIONS MADE OF CI BODY, 100MM DIA FLANGED
INLET WITH 2 NOS OF INBUILT SS, NRV (BODY TYPE) 1 NOS 4,745.76
WITH PVC BLANK CAP & CHAIN.
(MAKE:- AAAG / NEWAGE)
C2 BUTTERFLY VALVE :-
PROVIDING AND FIXING OF BUTTERFLY VALVE WITH
MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER
GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / SANT)
(A) 100MM DIA (FOR 2 WAY VALVE) 1 NOS 5,200.00
C3 C.I. DUAL PLATE NON-RETURN VALVE :-
PROVIDING AND FIXING OF C.I. DUAL PLATE NON-RETURN
VALVE WITH MS FLANGES, GI NUT, GI BOLT, GI WASER
& RUBBER GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / SANT)
(A) 100MM DIA (FOR 2 WAY VALVE) 1 NOS 6,350.00
SUPPLY, INSTALLATION, TESTING & COMMISISONING OF
G.I. "C" CLASS PIPE AS PER IS 1239 WITH PAINTING
(1 COAT OF ZINC OXIDE PRIMER AND 2 COATS OF PO RED
PAINT), SUITABLE TYPES OF SUPPORTS, HILTI FASTENERS,
BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS,
FITTINGS SUCH AS REDUCERS, TEES, ELBOWS, FLANGES.
INCLUDING CUTTING, WELDING, FIXING IN/ON WALLS,
CEILING BY USING SUITABLE SUPPORTS ETC.
(MAKE:- ASIAN / APOLLO / JINDAL)
(A) 100MM DIA 24 MTRS 1,800.00
NOTE: - LENGTHS MAY VARRY ACCORDING TO ASSEMBLY /
LOCATION OF PUMPS.
D PRESSURISED WET RISER SYSTEM
D1 BUTTERFLY VALVE :-
PROVIDING AND FIXING OF BUTTERFLY VALVE WITH
MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER
GASKET ETC. COMPLETE AS REQUIRED.
(MAKE:- ZOLOTO / SANT)
(A) 100MM DIA 1 NOS 5,200.00
D2 FORGED BRASS BALL VALVE :-
PROVIDING AND FIXING OF FORGED BRASS BALL VALVE
SCREWED END (SUITABLE FOR WORKING PRESSURE
(MAKE:- ZOLOTO / SANT)
(A) 25MM DIA (FOR RISER DRAIN) 1 NOS 830.51
(B) 25MM DIA (FOR AIR RELEASE VALVE) 1 NOS 830.51
(C) 20MM DIA (FOR HOSE REEL TAPPING) 2 NOS 578.03
D3 FORGED BRASS AIR RELEASE VALVE :-
PROVIDING AND FIXING OF FORGED BRASS AIR RELEASE
VALVE SCREWED END. (SUITABLE FOR WORKING
PRESSURE OF 25KG/SQ.CM.)
(MAKE:- ZOLOTO / SANT)
(A) 25MM DIA 1 NOS 1,822.03
SUPPLY, INSTALLATION, TESTING & COMMISISONING OF
G.I. "C" CLASS PIPE AS PER IS 1239 WITH PAINTING
(1 COAT OF ZINC OXIDE PRIMER AND 2 COATS OF PO RED
PAINT), SUITABLE TYPES OF SUPPORTS, HILTI FASTENERS,
BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS,
FITTINGS SUCH AS REDUCERS, TEES, ELBOWS, FLANGES.
INCLUDING CUTTING, WELDING, FIXING IN/ON WALLS,
CEILING BY USING SUITABLE SUPPORTS ETC.
(MAKE:- ASIAN / APOLLO / JINDAL)
(A) 100MM DIA 12 MTRS 1,800.00
(B) 80MM DIA (FOR HYDRANT BRANCHING) 2 MTRS 1,700.00
D5 HYDRANT VALVE :-
PROVIDING AND FIXING OF SS-304 SINGLE OUTLET
FIRE HYDRANT VALVE, HAVING 63MM FEMALE OBLIQUE
TYPE AND 80MM FLANGED INLET, AS PER IS:5290, 2 NOS 8,898.31
ISI MARKED WITH ABS BLANK CAP AND GI CHAIN.
(MAKE:- AAAG / NEWAGE)
FRP SHEETED DOUBLE DOOR HOSE BOX
D7 HOSE REEL DRUM SET :-
SUPPLYING AND INSTALLING TESTING AND COMMISSING
OF WALL MOUNTING SWINGING HOSE REEL DRUM AS
PER IS 884 AND FITTED WITH 20MM DIA X 30METER
LONG HIGH PRESSURE RUBBER HOSE PIPE WITH S.S. 2 NOS 10,593.22
SHUT OFF NOZZLE WITH NECESSARY MS BRACKET FOR
HOLDING HOSE REEL DRUM.
(MAKE :- AAAG / NEWAGE)
D8 HOSE PIPE :-
PROVIDING AND FIXING OF RRL FIRE HOSE OF 63MM
DIA X 15 METER AS PER IS:636, TYPE-A, ISI MARKED
WITH SS-304, 63MM MALE & FEMALE COUPLING AS PER 4 NOS 4,067.80
IS:903, ISI MARKED BANDED WITH COPPER WIRE.
(MAKE:- AAAG / NEWAGE)
D9 HEXAGONAL NOZZLE :-
PROVIDING AND FIXING OF SS-304, 63MM X 20MM
SHORT BRANCH PIPE WITH NOZZLE AS PER IS:903,
(MAKE:- AAAG / NEWAGE)
E1 50% MAP ABC TYPE FIRE EXTINGUISHER :-
(A) 6KG CAPACITY 12 NOS 3,059.32
(MAKE:- SAFEX / KANEX / V-SAFE)
E2 CO2 TYPE FIRE EXTINGUISHER :-
(A) 4.5KG CAPACITY 12 NOS 8,127.12
(MAKE:- SAFEX / KANEX / V-SAFE)
E3 MODULAR TYPE AUTOMATIC FIRE EXTINGUISHER :-
(A) 5KG CAPACITY (FOR METER ROOM) 2 NOS 2,656.50
(MAKE:- SAFEX / KANEX / V-SAFE)
F FIRE ALARM SYSTEM
F1 FIRE ALARM PANEL :-
2 LOOP ADDRESSABLE TYPE FIRE ALARM PANEL WITH
BATTERY BACKUP. 1 NOS 95,996.25
(MAKE:- MORLEY BY HONEYWELL)
F2 MANUAL CALL POINT :-
ADDRESSABLE TYPE MANUAL CALL POINT WITH BASE.
(MAKE:- MORLEY BY HONEYWELL)
F3 SOUNDER STROBE :-
ADDRESSABLE TYPE SOUNDER STROBE WITH BASE.
(MAKE:- MORLEY BY HONEYWELL)
F4 SMOKE DETECTOR :-
ADDRESSABLE TYPE SMOKE DETECTOR WITH BASE.
(MAKE:- MORLEY BY HONEYWELL)
F5 FAULT ISOLATOR :-
ADDRESSABLE TYPE FAULT ISOLATOR WITH BASE.
(MAKE:- MORLEY BY HONEYWELL)
F6 COPPER ARMORED CABLE :-
(A) 2 CORE X 1.5 SQ.MM. 1500 MTRS 101.69
(MAKE:- POLYCAB/RR CABLES/KEI)
(NOTE:- CABLE LENGTH MAY VARRY TENTATIVE)
NIGHT GLOVE SIGNAGES ON 3MM PVC FOAM SHEET.
(A) FIRE EXTINGUISHER (5 X 5 = 25 SQ.INCH X 12 NOS) 300 SQ. INCH 6.78
(B) FIRE HOSE REEL (5 X 5 = 25 SQ.INCH X 2 NOS) 50 SQ. INCH 6.78
(C) EMERGENCY EXIT (12 X 4 = 48 SQ.INCH X 2 NOS) 96 SQ. INCH 6.78
(D) FIRE PUMP (12 X 4 = 48 SQ.INCH X 3 NOS) 144 SQ. INCH 6.78
(E) FIRE PUMP PANEL (12 X 4 = 48 SQ.INCH X 1 NOS) 48 SQ. INCH 6.78
(F) MANUAL CALL POINT (5 X 5 = 25 SQ.INCH X 4 NOS) 100 SQ. INCH 6.78
(G) HOOTER (5 X 5 = 25 SQ.INCH X 4 NOS) 100 SQ. INCH 6.78
(H) FIRE ALARM PANEL (12 X 4 = 48 SQ.INCH X 1 NOS) 48 SQ. INCH 6.78
H1 ANNUAL MAINTENANCE CHARGES :- A TO G
PROVIDING COMPLETE DEMOSTRATION OF COMPLETE
FIRE SYSTEM & OBTAINING FIRE CERTIFICATE FROM FIRE
DEPARTMENT ALONG WITH FORM-16 (AMC CONTRACT
START AFTER 1ST YEAR OF INSTALLATION.)
SCOPE OF WORK :
# AMC CONTRACT IS FOR QUATERLY VISIT.
# OILING & SERVICING OF COMPLETE FIRE SYSTEM.
# DEMOSTRATION & TRAINING TO COMPLETE STAFF
# REPLACEMENT OF DEFECTIVE PARTS ON CHARGEABLE
BASIS AFTER 1 YEAR.
NOTE :- EVERY YEAR IT SHOULD BE 7% ON TOTAL
TENDER AMOUNT. YEAR
TOTAL OF GROUPS (A+B+C+D+E+F+G+H) WITHOUT GST
TOTAL 1+2+3+4 = (I)
PART (II) = 4 NOS OF UG TANK
1 Excavation for foundation include. Sorting out & stacking of
useful materaials & disposing of the excavated stuff upto
mt. Lead & all lift, watering etc. Comp.
(B) 1.5 TO 3.0 MT DEPTH 644.00 136.47 CM
2 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6
crushed stone agg. 20 m.m Nominal size)& curing comp. incl. 38.00 3,095.25 CM
cost of from work in:
3 Providing, mixing, placing, compacting by machine vibrator,
curing, testing M25 Design mix concrete as per IS 456:2000
(latest revision) and as per tender specification in all items
including cost of form work and rendering but excluding cost
of reinforcement
(3) Having more than 13 cm. Thickness 80.00 6,793.97 CM
4 Providing, mixing, placing, compacting by machine vibrator,
curing, testing M25 Design mix concrete as per IS 456:2000
(latest revision) and as per tender specification in all items
including cost of form work and rendering but excluding cost
of reinforcement
(H) RCC Wall -200 mm thick 68.00 8,336.43 CM
5 Half brick masonry in common brunt clay building bricks
having crushing strength not less than 35 Kg/Sq.Cm. in
Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in
foundation and plinth (C)Fly Ash Bricks
6 Filling in trenches with available excavated earth in layer not
exceeding 20cm in depth consolidating each deposited layer 464.00 136.92 CM
by ramming & watering
7 (B) Providing and laying integral cement ased water proofing
treatmentincluding preparation of surface as required for
treatment of roofs, balconies,terraces etc. consisting of
following operations.(a) Applying And grouting a slurry coat
of neat cement using 2.75 kg/sqm of cement admixed with
proprietary water proofing compound comforming to IS:2645
over the R.C.C. slab including cleaning the surface before
atment.(b) Laying cement concrete using broken bricks/brick
bats 25 mm to 100 mm size with 50% of cement mortar 1:5
(1 Cement : 5 Coarse sand) admixed with proprietary water
proofing ompound conforming to IS:2645 ,brick bats is finally
covered by jointless cement plaster 20mm th. in C.M. 1:4 556.00 511.00 SM
added with special water proofing compound confirming to
IS:2645 & top smooth finished with trowel with false
chequered marking of 300 mm.size.The treatment is carried
along the vertical surface of the parapet & other adjoining
wall up to height of about 300 mm in a shape of quarter
round vata Incl. curing etc. Comp. With average thickness of
120 mm and minimum thickness at khurra
8 Providing & Applying 10mm.th.cement plaster in single coat
on brick/concrete walls similar surfaces for plastering &
finished even & smooth with afloating coat of cement slurry
mixed with admixture of lime or neeru inrequired proportion 372.00 199.28 SM
etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For walland
similar surfaces -- Ground Floor
9 Providing & Laying white glazed tiles 6mm. th. Of Orient,
Kajaria,Jhonson,Nitco,Somani,Bell make at all floor levels in
skirting risers of steps &dado on 10 mm. th. C.M.1:3(1cement
:3 sand) including ecessary cementpaste for fixing and joined
with white cement slurry etc. complete. For all floors
10 Providing & Laying white glazed tiles 6mm. th. of Orient,
Kajaria, Jhonson,Nitco,Somani ,Bell make at all floor levels, in
flooring, treads of steps & landings laid on a bed of 12 mm.
Av. Th.C.M.1:3 (1cement :3 sand) finished with flush pointing
in white cement etc.com. For all floors
11 Providing interlocking type Rubber moulded cement concrete
paver block of approved shape, design & colour having 60mm
thickness (M-35)
purchased from SMC's approved paverblock manufacturer
only & fixing of fine sand bedding. Item includes levelling by 216.75 524.00 SM
using vibratory plates
compacted machine. Item also includes all aterials, labour,
equipments, tools, plants, watering, cleaing etc. complete.
12 Providing & Fixing TMT / CRS bar reinforcement for RCC
work including bending, binding and placing in position etc. 22,800.00 77.29 KG
13 Steel work welded in built up sections, framed work including
cutting, hoisting, fixing in position and appling a priming coat
of red lead paint.M.S. iron compound Gate /ornamental Gate. 360.00 91.08 KG
Including using frame or angels, channels as per design and
14 Providing, Laying and jointing on true line and level UPVC
pipe (SCH-40) line of Prince/Supreme /Jain/ Astral/
Tulsi/Finolex make including fittings make or equivalent as
approved by angineer-in-charge. Pipe shall be fixed on the
wall the help of clamp at every two meter C/C or shall be
oncealed as directed including necessary fittings etc.
including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
15 Providing & Fixing abonite ball cock of approved qualities
directed etc. 4.00 102.91 NOS
comp. (A) 25 mm. dia.
16 Providing & Fixing gun metal check or non return full way
all floors levels, etc. complete.
(A) 15 mm dia. 4.00 186.43 NOS
(B) 25 mm dia. 4.00 420.63 NOS
17 Supplying and erecting Direct On-line Electronics Starter with
2-5/4-10/8-14/10-16 Amp. Rating relay (variable current
setting) directly operated in totally insulated elegant
enclosure and 18 Amp. Rating power relay with start - stop
button for single phase operation up to 3 HP as per complete
erected on P.W. Block with following features.
Low voltage cut off below 140 V
High voltage cut off above 280 V
Overload protection
Indicating LEDs for motor on lv, hv & overload tripping.
18 Providing & erecting open well type horizontal mono block
pump set with stainless steel body having following
(C) 1 H.P. single phase open well motor pump set suitable for
185 LPM discharge @ 25 mtr. head, suitable for 32 mm dia.
Delivery pipe with control panel.
19 Supplying & erecting approved make Automatic liquid level
controller 6A. with sensor testing as per instruction of
Engineer in charge on site complete with wiring connection 4.00 2,332.00 EA
with existing wires , with copper conductor from pump to
upper and lower tank.
20 Providing and erecting ISI marked PVC insulated PVC
Sheathed Flat flexible Submersible copper cable approved
make of following Size.
(A) 3 Core x 1.5 Sq. mm. 240.00 65.00 MTR
(B) 3 Core x 2.5 Sq. mm. 240.00 103.00 MTR
GRAND TOTAL (I) + (II)
GRAND TOTAL (I) + (II)
EXECUTIVE ENGINEER
SOUTH ZONE-B (KANAKPUR)
CONTRACTOR SIGNATURE SURAT MUNICIPAL CORPORATION
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
02-TECH BID.pdf
PRICE BID WO.2.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].