Restoration of different MI scheme namely at Amjadnagar, Boroj colony,Sonaichari-II, Celefa khamar, Uchaipara-I, Uchai para -II, Mog para, Ratanpur, Charaliya khil, Gajariya and Debipur-II, Hicha Cherra under Hrishyamukh R.D Block and BMC area under

Repairing of OSCO Starter including supplying and fixing of necessary spare parts as per direction of Engineer - in - Charge . a)Starter finger

b)Gola finger

c)CT coil

d)Magnet Coil

e)Circuit board for OSCO starter of Backlite make

Supplying & fitting fixing kit cut for main & sub-main swich (Male & female) as per direction of the Engineer in Charge. a) 63 amps

b) 100 amps

c) 200 amps

providing and installation of copper strips of 200 amps busbar by replacing the damaged one with necessary nuts and bolts etc. as per direction of Engg. In - charge.

providing and fixing 200 amps busbar of size 600x450x100 mm with 4 nos copper strip of size 450x4x4 mm of approved quality

Welding by gas or electric plant including transportion of plant at site etc. complete as per standard design.

Providing & fitting fixing PVC suction hose pipe overall thickness 6mm of best quality at site of work (Pankaj made) of approved quality.150 mm dia

providing and fitting fixing M.S Clamp for hose pipes with nuts and bolts compplete as per relevant IS Specification and direction of the Engineer -in charge.150 mm dia

Supplying & fitting fixing manually operated oil immerged starter of approved quality. a) 30 Hp Osco/ BCH Make

Providing fitting fixing G.I brass fullway valve as per CPWD specification and direction of the Engg. In charge. a). 40 mm dia fullway valve

Providing and fixing chlorinated polyvinyl chloride(cpvc) pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings this includes jointing of pipes and fittings with one step cpvc solvent cement trenching refilling and testing of joints complete as per direction of engineer -in - charge. 40 mm nominal outer dia pipes

Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling etc. complete as per CPWD specification and direction of the Engineer - in - charge. External work 40 mm dia. nominal bore

Providing and fitting fixing of the following electrical equipment of approved quality as per direction of Engg-in-Charge. A)Current range 200 amps

A)Current range 63 amps

AC Ammeter SMI-144,Range0-10A

AC Volmeter SMI-144,Range 0-400 to 0-500

e.200 Amps kitcut

f. 63 Amps kitcut

Providing & fitting fixing of following equipment of approved quality as per direction of Engg - in - Charge. a. 150 mm dia G.I bend

b. 125 mm dia. G.I bend

c. 150 mm dia MS Flange (10 mm thick)

c. 125 mm dia MS Flange (10 mm thick)

i. 150 mm dia C.I. foot valve of approved quality

Providing & fitting fixing C.I foot valve spare parts of 125/150 mm dia at site of work of approved quality.C.I foot valve weight

C.I foot valve ring

C.I foot valve net

Providing and fitting fixing C.I foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.m. 150 mm dia foot valve washer

Providing and fitting fixing C.I Tail piece of approved quality at site of work.a)150 mm dia

Providing and fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality.a). 150mm dia. Flange washer(rubber)

b). 125 mm dia rubber flange washer

Providing & fitting fixing C.I coupling complete with nuts & bolts of approved quality.a. 190 mmφ

Providing & fitting fixing sleeve bush /long bush of various pumpsets of approved quality As per direction of Engg.- In - Charge. a. Mather & plant

b. Joyti

c. Kiloskar

Providing & fitting fixing C.I. gland of approved quality.

Providing and fitting fixing coupling rubber bush(all size) of approved quality.

Providing and fitting fixing coupling rubber bush(all size) of approved quality.a) 150 mm dia

b) 190 mm dia

c) 225 mm dia

Dismentalling of motor for vernishing, heating etc. complete in/c reinstallation and trial run for 10 hrs in two spell complete as per direction of Engineer-in-charge

Supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6310 Ball bearing (TATA /SKF)

ii) 6309 Ball bearing (TATA /SKF)

iii) 6306 Ball bearing (TATA /SKF)

iv) 6305 Ball bearing (TATA /SKF)

v) 6206 Ball bearing (TATA /SKF)

Dismantling of horizontal pump and motor of 20/25 HP from the base and carrying the pump setb to the nearest workshop for repairing the body thread of stag nut and carrying the same to the scheme and fitting fixing the pump set as before as per direction of the Engineer - in - charge.

Suppliying and fitting fixing of asbestos rope of best quality as per direction of Engineer - in charge

Supplying and greasing/applying of grease of approved quality as per direction of Engineer -in - charge.

Dismentaling of pump for over hauiling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the Engineerin-Charge.

Providing & fitting fixing Pump Shaft sleeve bush of approved quality. For LI. CI

STAINLESS STEEL

Providing & fitting fixing Shaft sleeve nut of approved quality.a) Cast iron

Providing and fitting fixing gland nut/stag nut 100 mm long for gland of approved quality.

Providing & fitting fixing Pump Shaft of approved quality.

Providing & fitting fixing C.I. Impeller of approved quality for Horizontal pump

Supplying following tools for day to day maintenance of pump sets and other accessories of TAPARIA make (Hammer 500grm.Sly Wrench big size,cutting plier,screw driver,dal wrench 14x15,16x17,18x19,20x21)

Labour charge for removal of deposited silt clay etc. from pump house & cleaning by water jetting or any suitable method as per direction of Engg-In-Charge.

Labour charge for cleaning of clay,silt etc.washing of all electrical equipment of panel board by petrol or any suitable method as per direction of Engg-In-Charge.

Providing and laying GI pipe as per IS specification 1161,3589 and 1839 complete with necessary fittings and direction of the Engg. In Charge. a)150 mm dia

Providing & fitting fixing of pannel board of local teak wood for fitting & fixing of electrical items including 2 nos. MS anglepost (Size 50X50X6mm 2.80 Mtr. long) nuts& bolts etc. for errection of the same by 1 : 1.5 : 3 cement concreate casting (1feetX1feetX2feet) below the ground level and painting two or more coats of synthetic enamel paint on primer as per direction of Engineer-in-Charge. Size 1.80 X 1.20 X 0.025 mtr.

Hiring charge of welding set of single phase with operating staff and carrying upto the site of work including loading and unloading (both way) complete as per direction of Engineer-in-charge.

Supplying & fitting fixing of PVC insulated Copper Wire with all ectrical equipments including trialrunetc.complete (ISIMarked) on the pannel board ofapproved quality. A) 7/16 Copper Wire

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: a) 1:11/2:3 ( 1 Cement: 11/2 fine sand : 3 graded well burnt brick aggregate 20 mm nominal size)

Providing and fixing MS bolts including nuts and washers complete as per standard design:- a) Above 300mm length.

Providing and filling of Transformer Oil of approved quality into well immersed star delta starter of as per direction of the Engg-In-Charge.