Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹38.8 LAccepted-AOC | L-1 | Accepted-AOC Lowest | |
| 2 | L-2₹40.5 L+₹72,223.11 (1.82%)Rejected-AOC | L-2 | Rejected-AOC Other than Lowest | |
| 3 | L-3₹41.2 L+₹1.4 L (3.50%)Rejected-AOC | L-3 | Rejected-AOC Other than Lowest | |
| 4 | L-4₹41.5 L+₹1.8 L (4.40%)Rejected-AOC | L-4 | Rejected-AOC Other than Lowest | |
| 5 | L-5₹41.8 L+₹2.0 L (5.03%)Rejected-AOC | L-5 | Rejected-AOC Other than Lowest |
Tender Value
₹36 L
EMD Value
₹72,000
Closing Date
2 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 969 EWS
GE 969 EWS CO 56 APO
PROVN OF STORE ROOM FOR ASC AT RAMPUR AND SPL REPAIR TO BLDG NO T-54 STORAGE ACCN AND BLDG NO T-6 ORs LIVING ACCN T-15 OFFR LIVING ACCN T-34 JCOs LIVING ACCN AT RAMPUR UNDER GE 969 EWS
2022_MES_530046_1
969/WS- /2022-23
Open Tender
Civil Works
Item Rate
180 days
rampur
pls refer tender document
10 documents required · 10 mandatory
₹500
GE 969 EWS
₹72,000
Yes
14 Jul 2022
10 Jun 2022
4 Jul 2022
10 Jun 2022
2 Jul 2022
25 Jun 2022
10 Jun 2022 - 15 Jun 2022
60 days
Amount
Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below & above GL) unreinforced complete all as specified.
Dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.
Demolition of brick work, stone/boulder masonry built in cement mortar all as specified
Taking down cement plaster on brick or stone walls etc. including raking out joints hacking for keys scrubbing down with water etc complete all as specified.
Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for fdn,shafts,pier hole n. exc. 10 sqm on plan and getting out soft/loose soil,complete all as spd and directed.
PCC 1:4:8 type B1 using (20mm graded crushed aggregate) as in sub base and in foundation concrete complete all as spd and directed.
Returning filling , including, spreading, levelling and well ramming in layers n.exc 25cm complete all as spd and directed
Rough excavation n.exc.1.5m deep and getting out soft/loose soil complete all as specified.
Removing excavated material exc1.50Km but n.exc 5.00 km and depositing where directed .
M&L for 25 mm thick damp proof course in PCC 1:2:4 type B-0 Using 12.5 mm graded stone aggregate ,to horizontal or vertical surfaces including necessary formwork complete all as specified.
M&L for PCC 1:2:4 type B1 40mm thick (20mm graded aggregate) as in floors etc complete all as specified and directed.
Earth filling under floors , including, spreading, levelling, well ramming and watering in layers n.exc 25cm complete all as spd and directed
M & L brickwork with subclass `B` straight or curved on plan n.exc 6m mean radius built in CM 1:6 complete all as spd and directed.
M&L brick work with sub class B bricks straight or curved on plan to any radious in half brick thick built in CM 1:4 complete all as specified.
M & L formwork to soffits of suspended slabs such as roof slab n.exc 200mm thick complete all as spd and directed.
Formwork to sides of footing, plinth band, lintel band etc complete all as spd and directed.
Formwork to sides of columns complete all as spd and directed.
M & L formwork to edges of concrete flats, treads, floor and roofs n.exc 20cm wide complete all as spd and directed.
M & L Reinforcement cement concrete Type M-25 (20mm graded crushed aggregate) as in slabs,chajjas supported on walls, complete all as spd and directed
M & L Reinforcement cement concrete Type M-25 (20mm graded crushed aggregate) as in footing, plinth band complete all as spd and directed
M & L Reinforcement cement concrete Type M-25 (20mm graded crushed aggregate) as in , columns complete all as spd and directed
M & L Reinforcement cement concrete Type M-25 (20mm graded crushed aggregate) as in , beams & lintels complete all as spd and directed
Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns,hooking ends and binding with and including mild steel wire (annealaed) not less than 0.9mm dia or securing with clips quality conforming to Fe-310-0 or Fe-410-0 all as specified and directed incl drilling to cement conc surface for fixing of reinforcement in position all as specified.
Ditto as above item 23 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as spd and directed.
Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement and two coat of cement base paint incl one coat of alkali resistant complete all as specified and directed
Rendering 15mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified.
M&L for preparation of new plastered surface and applying two coats of OBD ,whiteor tinted ,over a coat of chalk whitening,complete all as specified and directed
Supply only water proofing compound
S&F , rolled mild steel of grade Fe -410-W(Grade E-250),quality "A" in roof trusses (framed) trussed,purlins,crane gantries,rails and fastenings and heavy bracket framing(beam,tee,angle,channel or flat sections) including distance pieces,cleats etc. complete all as specified.
S&F wind ties for roof including all as necessary drilling, bolting etc conforming to Fe-290-0 or Gde E-165 including two coat of synthetic enamel paint and dismantling ,complete all as spd and directed.
Dismantling of plain or corrugated steel sheeting ,any gauge, thickness, including Nainital or similar pattern roof coverings in any position
S&F0.63mm thick grade 'O' with 120gm per sqm zinc coating corrugated galvanised iron steel sheeting with two corrugaion side lap (Horizontal distance of side and end lap shall not be less than 145mm and 150mm respecively fixed with L Type or J Type or cranked hook bolts in roof
ditto as in item No 32 above but except sheeting
S& F 0.80mm thick grade 'O' Plain with 120gm per sqm zinc coating, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings
Supply and fixing, pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
All as per item No 35 as above but using plain steel sheet complete all as specified and as directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.
Dismantling boarding/wall panelling any description fixed in any position with nails complete all as specified.
Dismantling fillets, rails, posts ,rafters, purlins, etc under 40Sqcm in section complete all as specified.
M&L 4mm thk Plywood, grade BWP, type BB fixed with screws to timber frame work on wall complete all as specified.
M&L 4mm thk Plywood, grade BWP, type BB fixed with screws to timber frame work on ceiling complete all as specified.
M&L for second class soft wood (Kail) clean swan timber fixed in scantling complete all as specified.
S&F hollow printed PVC sheet in Stripp & Channel feathered at the edge for fixing on solid PVC lining and solid PVC Portion inclusive of solvent cement and fixing complete all as specified.
M&L 2nd class soft wood Plain fillets exc 13 Sq.cm , n exc 25 Sq.cm rectangular in section, clean sawn screwed with nails or brads all as spd
M&L 2nd class soft wood Plain fillets exc 6 Sq.cm , n exc 13 Sq.cm rectangular in section, clean sawn screwed with nails or brads all as spd.
S & F Prelaminated PVC board, interior grade, prelaminated one side with decorative choice lamination and otherside balancing white lamination fixed with screw to timber frame work 25mm thick as in cup board. drawers/ shelves/ petmets with teak wood batton lipping complete all as specified.
S & F Anodised aluminium snap grid 605mm x 605mm size frame work for false ceiling all as specified
S & F Perforated particle board/tiles for insulation and accousitc purposes 60x60cm in size fixed with screwes in ceiling or flat or sloping in GI frame work for seamless ceiling compressing of GI perimeter channel 0.55mm thick with two unequal flanges of 20 mm and 30mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screwes at 450mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fastern with and incl ceiling section (not exc 1.2m length ) of 0.55mm thick and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecton clips accross the intermediate channel at 457 mm centre to centre including hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified.
Taking down chowkat or frames with shutter (without taking off shutter from the frame)area exc 1.5 Sqm but n.exc 4.0 Sqm each complete with hold fasts etc. complete all as specified.
Taking down chowkat or frames with shutter (without taking off shutter from the frame) area n exc 1.5 Sqm each complete with hold fasts etc. complete all as specified.
Taking down shutter of any description area exc 1.0 Sqm but n.exc 2.0 Sqm complete all as specified.
Taking down shutter of any description area n exc 1.0 Sqm complete all as specified.
Hacking out old broken glass of any thickness ,size, quality or description n exc 1.5 sqm from wooden /metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones etc complete all as specified.
S&F 2nd class soft wood plain soild,straight chowkats and frame wrought,framed rebated on soild,rounded or chamfered,put together with pinned at joints all as spd.
M&L PCC 1:3:6 type C1 in hold fast etc incl all necessary formwork complete all as specified.
M&L for PCC 75mm thick type C-2 1:3:6 (40mm graded aggregate) as in sub base complete all as specified.
M&L for 50mm thick cement concrete M-10 nominal mix type C2 using 20mm graded Agg as in plinth protection and similar works finished even and smooth without using extra cement complete all as specified.
M&L cement concrete type B-1, 1:2:4 (using 20mm graded aggregate ) as in copping, benching etc complete all as specified.
M&L for PCC 1:2:4 type B1 25mm thick (20mm graded aggregate) as in floors etc complete all as specified and directed.
M&L for hard core of broken stone or boulders of gauge n.exc.63mm deposited,spread,levelled in layers n.exc.15cm thickness,watered and rammed to a true surface complete all as specified.
M&L for machine cut kota stone slab flooring 15-20 mm thick over and incl 15 mm th cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified..
M&L for machine cut kota stone slab on vertical surfaces, 15-20 mm thick over and incl 15 mm th cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.
M & L Chequered cement concrete tiles of size 30cm x 30cm x 25mm thick (with grey cement and pigments) set, jointed and pointed in neat cement slurry in floor,laid over and incl 15mm thick cement screed base in CM 1:6,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, grinding complete all as spd. .
M & L Non-skid ceramic coloured tiles 8mm thick(square or rectangular) coloured joint free area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding layer of cement mortar in CM 1:6
M & L for Mat Finish(Non-Skid) coloured tiles straight edge, standard economic class-II a grade of size of each tile exc 0.18 sqm but n exc 0.36 sqm , thickness not less than 6mm as in floor etc set joined in neat cement slurry and poined with coloured cement laid over and incl 15mm thick bedding layer in CM 1:6 complete all as specified.
M & L glazed coloured ceramic coloured tiles of size 350x 250x 7mm/ 450X 350X 7mm set and jointed in white or coloured cement to match on vertical surfaces such skirting ,dados, rises to steps etc over 15mm thick rendering in cement mortar in 1:6 complete all as specified.
M&L C. conc M-10 (Nominal mix) type C-1 using 20mm graded aggregate as in surface channel and drain all as specified.
Preparation of new or previously untreated surface of wood of any description not otherwise described over 10 cm width or grith two coat of synthetic enamel paint over a coat of of red oxide including as as specified.
Preparing of newly plastered or unplastered surfaces of walls and applying two coat of cement base paint over a coat of white wash complete all as specified.
Preparing of old plastered or unplastered surfaces of walls and applying two coat of cement base paint over a coat of white wash complete all as specified.
Preparation of new steel surface , not otherwise described over 10 cm width or grith two coat of synthetic enamel paint over a coat of of red oxide including as as specified.
Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work complete all as specified.
M&L for second class soft wood (Kail) clean swan timber fixed in scantling complete all as specified..
All as per Ser item No 73 above but except timber complete all as specified and directed. (Note : Serviceable timber obtained from ser item No 72 above to be used).
Dismantling of boarding any description fixed in any position with nails complete all as specified. .
M&L, for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all as specified and directed.
All as per Ser item No 76 above but except boarding complete all as specified and directed. (Note : Serviceable boarding obtained from ser item No 75 here-in-before to be used).
S & F for 35mm thick flush shutter,solid core construction with block board core and plywood face panels,commercial on both side supplied and fitted to chowkhats complete all as specified.
S & F for 35mm thick 2nd class S.W wire/ glazed door shutter edged of frame plain chamfered or rounded fitted with cut and mitred beads for securing glass/gauge etc size of members of shutters as specified and fitted to chowkat complete all as specified..
S&F 35 mm thick ,plain,framed,pannelled shutters(any number of pannel),with pannel of timber flat on both sides (feather edged),or of veneered particle board medium density, wood particle board with commercial face venner; supplied and fitted to chowkats, complete all as specified and directed.
S/F 30mm thick 2nd class soft wood glazed & skeleton window shutter open rebated and prepared to receive glass or wire mesh gange etc( without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securiny glass etc size of members of shutters as spd in SSR Part-II section 8 clause 8.23(b) as complete and all spd..
S&F wood grain Factory made PVC solid door/window/ventilator frame of size 50mmx47mm made out of 5mm prelam sheet in stead of plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M S square tube complete frame fixed with screws/nails /bolts to walls complete all as spd.
S&F Factory made wood grain solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S & F Factory made fully glazed (frosted/ ground/ obscured)PVC window /ventilator shutter 30mm thick(Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top and bottom rail on either side and as gap inserted for top and bottom rail(rate incl glass panes)
M&L MS barrel tower bolts of extruded section and fixed of 150mm length .
S&F Aluminium alloy,anodised, sliding door bolts plate type stove enameled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple. Plate300mm long all as spd & directed.
S&F Aluminium alloy,anodised, sliding door bolts plate type stove enameled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple. Plate250mm long all as spd & directed.
Supply& Fixing butt hinges medium weight cold rolled mild steel 100mm
Supply& Fixing butt hinges medium weight cold rolled mild steel 75mm
Supply& Fix aluminium handle cast type anodiised 150mm.
Supply& Fix aluminium handle cast type anodiised 100mm.
S&F 150mm length aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 100mm length aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 300mm ordinary rat tail rod pattern springs including rooler and roller plate of mild steel complete all as specified.
S&F 3.00mm thick sheet glass ordinary quality and glazing with oil putty or with wooden beads n.exc 0.5 sqm in each pane) complete all as specified.
S&F Galvanised mild steel wire clloth 0.63mm nominal dia of wire and average width of aperture 1.8mm and fixed with tinned tacks or glavanised wire staples
S&F mild steel clamps hold fast wall ties hooks etc and similar article confiring to Fe-290 Gde E-165 complete all as specified.
S&F framed work such as grills gratings etc with end of bars shoulderd and or riveted or forged in to spikes framed guard bars, barred iron doors etc and similar work concorming to Fe-290 Gde E-165 complete all as specified.
S & F for tubular curtain rails 20mm dia of aluminium anodised complete all as specified.
S&F for Aluminium anodised Brackets fixed in repair for item 99 complete all as specified.
Taking up or down GI tubing 15mm bore with all connection complete.
S&F 15mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor.
S&F 10 Ltr PVC valve less symphonic action type flushing cistern low level white/coloured with inlet ball valve float , handle, PVC pipe to WC and incl PVC connection 600mm long complete fixed in repairs.
S&F CP bib tap 15 mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule fixed in repair complete
S&F vitreous china squatting pan Orrisa pattern 580x440mm white with integral foot rest (excluding flushing cistern) fixed in repairs
S & F vitreous china wash basin , white flat back of size 550x400mm fixed in repair including cutting for and pining in ends of brakets including 15mm dia piller tap cast copper alloy with capstan head cromium plated screwed down high pressure with or without lettred hot or cold with long screw shanks and fly nuts screwed for iron pipe complete all as specified.
S & F PVC (SWR) pipe 110mm bore single in any type with rubber ring joint laid in wall/trenches /floor.
S & F PVC (SWR) pipe 75mm bore single in any type with rubber ring joint laid in wall/trenches / floor all as spd
S & F PVC (SWR) bend any radious 110mm bore
S & F PVC (SWR) 110mm Junction single (single T) equal or unequal.
S & F PVC (SWR) vent cowl 110mm bore.
S & F PVC (SWR)gully trap 125/110mm setting and jointing with solvent cement as fixed in repairs
S & F PVC(SWR) reducers 75/110mm bore
M & L PVC(SWR) floor trap 75 mm dia and over , plain with grating incl jointing with sovent cement as fixed in repairs all as spd and directed
Preparing newly plastered surfaces of walls and applying three coats of white wash,complete all as specified and as directed
Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc
M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.
(a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way
(b) One 3 pin 5 Amp switch socket outlet on same board with accessories
(c) One 3 pin 5 Amp switch socket outlet on independent board
S&F switch piano Flush type, single pole, one way 5 amp 240 volts, complete all as specified and as directed.
S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.
S&F Switch socket combination 2 in1, 3 pin,5 Amps flush type,universsal complete all as specified and as directed.
M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.
S&F Switch socket combination 2 in1, 3 pin,5 and 15Amp flush type,universsal complete all as specified and as directed.
Supply and fixing LED lights fitting 1x 22 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.
S & F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified.
S & F in repairs MCB, SPN 32 Amps 240 Volts C curve, complete all as specified and as directed.
S & F MCB SP 6 to 32 Amps, 240 Volts, C Curve complete all as specified and directed.
S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.
S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 10 sqmm all as specified and directed
Supply and fixi LED Bulb 12 Watt all as specified and directed
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm all as specified and directed
Supply and fix in repair electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified and directed
M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work as Excavation, RF and removal etc.
M/S HAJI MOHD ASHRAF SUMJI
M/S KULWANT SINGH RAINA AND CO
M/S GHULAM HASSAN MALIK
M/S NISAR AND CO
M/S GHULAM QADIR WANI AND SONS
m/s mohd rafiq lone
M/S GHULAM NABI LONE AND BROS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .