WELCOME MAINT TO OFFRS MD ACCN UNDER THE AREA OF AGE B/R-II OF GE (ARMY) NO 1 JODHPUR

Amount

M&L for preparation of old decorated wall surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying one coat of white wash on wall, complete all as specified and directed.

M&L for preparation of old decorated ceiling surfaces including cornices pilasters by brooming down or steel wire brushing, scraping down,smoke shoot,moulds,moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling, complete all as specified and directed.

M&L for preparation of old decorated wall surfaces plastered or unplastered, including cornices pilasters by brooming down or steel wire brushing and efforescent salts and applying one coat of distemper oil emulsion on wall, complete all as specified and directed.

M&L for preparation of old decorated wall surfaces, including crack filling by compound of putty to get a uniform smooth surfaces including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying one coat of plastic emulsion on wall, complete complete all as specified and directed.

M&L for preparation of old surfaces of wall by brooming down or steel wire brushing, scrapping down mass and efflorescent salts and trading oil & greasy spots, washing rubbing down and stopping distempered surfaces and applying two coat of exterior acrylic emulsion on wall as per the manufacturer’s instruction over a coat of primer/ wall putty complete all as specified and directed.

M&L preparing old decorated plastered or un-plastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and washing down with water including complete removal of existing treatment complete all as directed.

M&L for applying 2 mm thick wall care putty on wall surfaces including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and also M&L for applying two coats of plastic emulision paint on wall surfaces as per manufacturer’s instruction, complete all as specified and directed. Note -i)- Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. ii)- Plastic paint shall be in one or more colours/ shades all as approved by GE.

All as per item No. 7.00 here-in-above, but applying two coats of oil bound distemper.

All as per item No. 7.00 here-in-above, but applying two coats of texture paint.

M&L for preparation of old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and as directed .

All as per item No. 10.00 here-in-above, but steel surfaces.

Taking down carefully cement plaster/ spalled out concret from wall, ceiling of RCC slab, sunshedes, beams, etc by chipping out lightly including necessary scaffoding etc., complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for 10 mm thick Rendering in CM 1:4 on fair faces of brick work or conc surfaces as in ceilings/chajja/facia & finished even & smooth w/o using extra cement, complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying 2 mm thick wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and also M&L for applying two coats of oil bound distemper on wall surfaces, complete all as specified and directed. Note -i)- Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. ii)- OBD shall be in one or more colours/ shades all as approved by GE.

M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.

Dismantling, stone slab, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and as directed.

M&L non skid ceramic colour joint free tiles 6 to 7 mm thick of size area exc 0.06Sqm but nexc 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match including M&L for 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for glazed coloured ceremic tiles in vertical surfaces as in skirting, dado & etc., size 300x200x7mm/ 300x450mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including M&L for 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L Virified Cermic tiles light shed as existing 10 mm thick (squre/retangular) polished, area of each tiles n ecceding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or colured cement including M&L for 15 mm thick screed bed in CM 1:6 to match complete all as spcified and directed.

All as per item No. 20.00 here-in-above but skirting surface inluding M&L for 10 mm rendering in Cm 1:4 complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area not exc 1.5 Sqm each, complete all as directed.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.

Taking down shutters of any description area exceeding 1.0 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

M&L mild steel work as in door frame and similar work fixed with angle cleates, confirming to Fe 410 Grade E - 250 Quality A, complete all as specified and as directed.

M&L for 35mm thick factory made 2nd class hard wood glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and directed.

S&F 35 mm thick factory made second class hard wood plain framed panelled shutter (Two panel) with lock rail and pannel of 9 mm thicks BWP commercial ply or 12mm veneered particle board with commercial veneered on both faces the size of rails and style as per IS-1003 (Part-I) kiln seasond and chemicadly pressue treated all as specified and directed.

S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, all as specified.

M&L for solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified.

M&L pre powder coated coloured aluminum anodized door frame and shutters for door/windows, etc or as approved by GE including jointing cleats for fixing etc as per manufacturers instructions complete all as directed. Note : (i) Weight of all aluminum members shall be measured(ii) Hinges, handles etc shall be measured and paid separately. (iii) Glass pan and rubber beading shall be measured and paid separately. (iv) Fixing of shutters with fittings shall be as per manufacturers instructions.

S&F Pre powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.), complete all as specified and as directed.

S&F standard powder coated coloured aluminum anodized Deco grill ‘U’ channel 25x12 mm with and including perforated aluminum wire mesh weight not less than 550gm/Sqm over grill complete all as specified and directed .

M&L for 4.8 mm thick tinted/frosted glass fixed with alu channel/snap grid and rubber beading packing in door, windows and ventilator and securing complete all as specified and directed .

S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed.

S&F in repairs hydraulic door closer designation No 3 universal type suitable for door shutter 851 mm to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (die cast) body complete all as specified and directed.

Taking down steel window/ventilator complete all as directed.

S&F of aluminium anodized ,tower bolt 200 mm long, extruded section complete all as specified and directed.

S&F aluminium anodised handle extruded section of size 150mm long complete all as specified and directed.

S&F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed.

S&F of mild steel butt hinges 100 mm size complete all as specified and directed.

S&F 100mm size single action door spring hinge complete all as specified and directed.

S&F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 140mm long complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incld punching or drilling out old glazing pins/ spring clips and provding and fixing new ones, complete all as specified and as directed.

S&F for 3 mm thick figurred, pin headed glass ordinary quality & glazing with oil putty in square n exc 0.50sqm ineach pane, complete all as specified and as directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed.

S&F in replacement decorative type curtain rod stainless steel finish of pipe 22 to 25mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end, complete all as specified and as directed.

M&L for high quality looking mirror 5 mm thick with fancy type beading fixed to wall with chromium plated screw area n exc 2.0 sqm fixed in repairs complete all as specified and as directed

S&F in repairs of stainless steel sinks with drainage boards ISI marks of 01 mm thick size 1040 x 510 mm bowl size 510 x 404 x 200 mm including waste coupling waste pipe brackets made high grade AISI-304 stainless steel, complete all as specified and as directed

S&F in replacement white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests and PVC 'P' or 'S' trap, including M&L brackets, flush HDPE pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts & fixing arrangement of cistern, including provision of cement concrete bedding 1:5:10 type E2 complete all as specified and as directed.

S&F in replacement vitreous ware wash down water closet [Pedestal Pattern], white [ETWC] including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap connecting to drain pipe and flushing pipe etc., complete all as specified and directed.

S&F in replacement vitreous china ware wash hand basin, white, flat back of size 400 mm X 550 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 300mm long complete all as specified and as directed.

S&F in repair Bidet spray (Health faucet) with 1.5 meter CP tube and holder, complete all as specified and directed.

S&F in repair 15 mm bore CP brass two way angular stop cock, screwed down high pressure with crutch or butterfly handle scrwed both ends for iorn pipe complete all as specified and directed.

S&F in repair 15 mm bore CP brass angular stop cock, screwed down high pressure with crutch or butterfly handle scrwed both ends for iorn pipe, complete all as specified and directed.

S&F in replacement of bib cock with flange 15mm dia, chromium plated, brass, fancy type, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F 15mm bore CP brass, central hole basin mixture pop um waste system with 450 mm long copper pipe and brass nuts ISI Marked sitable for over head counter, complete all as specified and directed.

S&F CP Wall mixture 3-in-1 system includinjg 1.50 mtr long tele showeer and overhead shower of size 150mmx150mm Make Jaquar incl hand shower, complete all as specified and directed.

S&F in repair of chromium plated shower rose 125/150mm dia round/square shape complete all as specified and directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore as directed

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore as directed

Supply & laying 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches of suitable size complete all as specified and as directed .

Supply & laying 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches of suitable size complete all as specified and as directed .

S&F 75 mm bore (SWR) PVC bends any radius with oval access door complete all as specified and as directed.

S&F 110 mm bore (SWR) PVC bends any radius with oval access door complete all as specified and directed.

S&F 75mm bore PVC [SWR] branch piece, single (single Y) equal or unequal complete all as specified and as directed.

S&F 110mm bore PVC [SWR] branch piece, single (single Y) equal or unequal complete all as specified and as directed.

S&F 75mm bore PVC [SWR] floor trap with grating including jointing with solvent cement complete all as specified and as directed.

S&F in replacement 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia complete all as specified and as directed.

S&F in replacement 500 ltrs capacity rotational moulded polythene water storage tank white colour, three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I, complete all as specified and directed.

All as per item No.70.00 here-in-above, but capacity of tank 1000 ltr.

S&F 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

M&L 18 to 20 mm thick granite(approved quality by user ) in WHB counter top etc laid in dry bedded in pinning to wall including cutting rubbing grinding and polishing to edges and rounding off granite polish slab for smooth finish complete all as specified and directed.

S&F in repair corner glass shelf 250 mm size complete all as specified and directed.

S&F in repair glass shelf below WHB 300 mm size complete all as specified and directed.

S&F in repair toilet paper holder chromium plated complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of size 1000 mm x 1200 mm x 300 mm made out of 1 mm thick stainless steel sheet complete all as specified and directed..

S&F in repair plastic water closet seat white closed pattern with flat bottom and cover and aluminium hinging device complete all as specified and directed.

S&F in repair CP towel ring 20 mm dia fancy type as per sample approved by Engr in charge complete all as specified and directed.

Taking out from position framed wood work as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed at site for overall sizes exc 0.50 sqm but not exc 1.50 sqm & depth not exc 60cm, complete all as specified and directed.

M&L for UPVC Coated Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) polyvinyl chloride (PVC) sheet frame of width 150mm & 18mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3 Nos. of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc, all as per manufracturers specifications, complete all as specified and as directed.

M&L for 18 mm thick solid PVC sheet UPVC Coated Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified & directed .

S&F '0' degree clip type self closing hinges for cabinets fixed with cadimum coated screws, complete all as specified and as directed.

S&F 100mm size bright finished chromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters, complete all as specified and as directed.

S&F drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers,complete all as specified and directed.

M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil, complete all as specified and as directed.

M&L for Providing and injecting ATT chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc., complete all as specified and as directed.

M&L for Providing and injecting ATT chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

Supply, laying, testing & commissioning of 20 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and directed.

Supply, laying, testing & commissioning of 25 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and directed.

NOTE:- (i)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

M/s Ajay kumar Garge (BID ID -3139198)

BEYLIM INFRA (BID ID -3144890)

SNEH CORPORATION (BID ID -3145714)

HINDUSTAN TRADING COMPANY (BID ID -3146016)