PROVN OF GUARD ROOM ALONGWITH TOILETS BATHROOM NEAR A VEH GARAGE AND ADDN ALT SPL REP TO BLDG NO T 12 AND OTHER SANCTION WORK UNDER GE A NO 1 JODHPUR

Amount

Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation, Shafts, well, cess pits, manholes, pier holes etc. getting out in soft/loose soil complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed.

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

M&L treating the top surface of filled earth at the rate of 5.0 litres of emulsion per square metre of surface, complete all as specified & directed.

M&L treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (area of the substructure in contact with backfill to be measured), complete all as specified & directed.

M&L treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified & directed.

M&L for approved soil filling under the floor, spreading and levelling in layers n.exc. 25cm thick, well ramming including watering as required complete all as specified and directed.

Material & labour for hardcore of broken bricks gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

M&L for Reinforced cement concrete (M-25 Design Mix) as Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns etc; basement slabs, under-reamed piles and mass concrete, complete all as specified & directed.

M&L for Reinforced cement concrete (M-25 Design Mix) as Columns, pillars, piers, posts and struts , complete all as specified & directed.

M&L for Reinforced cement concrete (M-25 Design Mix) as Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified & directed.

M&L for Reinforced cement concrete (M-25 Design Mix) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified & directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified & directed.

M&L Form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough surfaces of concrete, complete all as specified & directed.

M&L Form work to sides and soffits of floor or roof beams lintels etc finished rough , complete all as specified & directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick flat fair finished surfaces of concrete, complete all as specified & directed.

M&L Formwork to edges of concrete flats, Chajja,treads, breaks in floors, window cills, concrete rail?ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon?tal or sloping and similar work exc 10cm but n exc 20cm wid (120mm thick of roof slab), complete all as specified & directed.

Supply & fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply & fix mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required as in stirrups , complete all as specified & directed.

M&L for Squared rubble walling Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 curved on plan to a mean radius n exc 6m , complete all as specified & directed.

Material & labour for Providing precast cement concrete solid building blocks 1:2:4 Type B1 (Using 20 mm graded stone aggregates) or slabs 10cm thick with plain or interlocking joints setting in mortar built in CM (1:4) as in as in walls, complete all as specified and directed.

Supply only integral water proofing compound all as in specified & directed.

Material & labour for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete or stone surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for 15 mm thick rendering on other than fair faces of brick work or concrete or stone surfaces,in CM (1:4) surface finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for 5 mm thick plaster in CM 1:3 on ceiling surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D2 (using graded stone aggregate) as in sub base, complete all as specified & directed.

M&L Machine cut Kota stone slab 20-25mm thick in flooring over and laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing over and including 20 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing over and including 15 mm thick rendering bedding layer of cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick screed bed in CM 1:4 complete all as specified and directed

M&L Glazed coloured ceramic tiles of size 450x350x7/ 350x 250x 7 to 8 mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 complete all as specified & directed.

M&L 75 mm thick PCC 1 : 3 : 6, type C1, (by using 20mm graded stone aggregate) for plinth pretection finishing even and smooth without using extra cement, Including expansion joint every three metre and change in direction and joint tobe filled with sealing compound Gde A complete all as specified and directed.

M&L for padding in PCC 1:2:4 type B0 (using 12.5mm graded stone agg) laid to a minimum consolidated thickness 50mm to provide a finished slope 1:30 , complete all as specified & directed.

Material & labour for cleaning of plastered /concrete surfaces and applying priming coat using bituminous primer @ 0.30 Kg/Sqm. followed by evenly a tack coat @ 1.20 Kg/Sqm. using with 85/25 grade bitumen, over laid with 3mm thick APP modified polymeric water proofing membrane with non woven polyester reinforced of weight not less than 3.6 Kg/Sqm. unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s instructions and finished top of APP water proofing polymeric membrane with a coat of hot blown industrial bitumen 85/25 grade @ 1.20 Kg/Sqm and finally finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm complete all as specified and directed.

Supply & fixing pressed steel frames for doors with one or more rebates including necessary fixing lugs lugs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm MS sheets complete all as specified & directed.

Supply and fix 30 mm thick flush shutter solid core construction with particle board and plywood face panels commercial type on both side, complete all as specified & directed.

M&L gauzed shutter shall be made out of angle iron 35x35x5mm, 25x25x5mm and 1.5mm thick as shown on drawing. The frame for shutter shall be of pressed steel and 10mm Square bars grill complete with fly proof wire mesh having 0.63mm nominal dia wire and 1.4mm average with aperture and 250mm M S sliding bolt , 150mm MS tower bolts and Aluminium 200mm Handle including two coats of synthetic enamel paint over a coat of red oxide , complete all as specified & directed.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as specified & directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified & directed.

S&F Butt hinges, 100 mm long of stainless steel complete all as specified & directed.

S&F Extruded aluminium alloy handles, fabricated type, anodised size of handle 150 mm, complete all as specified & directed.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed length of bolt 150 mm, complete all as specified & directed.

Supply & fix Aluminium. Sliding door bolts, plate type, complete, 250mm long complete all as specified and directed.

S&F 300mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate as in repairs, complete all as specified & directed.

Supply & fix 3mm thick sheet glass, ordinary quality, and glazing with oil putty/beading in square not exceeding 0.50sqm each pane complete all as specified & directed.

Supply & fix 4 mm thick figurred , pin headed glass ordinary quality & glazing with oil putty in square n exc 0.50sqm ineach pane complete all as specified & directed.

Supply & fix galvanized mild steel wire cloth with 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

M & L Steel window box type using ERW 'P' section comprising double frame for gauged and glazed skeleton shutter jointed internally with flat iron 40x3mm complete including hinges, handle tower bolts stops, lugs etc all as shown on drawing, complete all as specified & directed. Note:- (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mangeryas shown on drgs (iii) Guard bars glazing & wire mesh shall be measured & paid for separately.

Supply & fix steel windows or ventilators fixed type, complete all as specified & directed.

Supply & fix mild steel framed work such as grills, gratings guard bar etc with ends of bars shouldered and/ or riveted etc , complete all as specified & directed.

S&F Wash Basins,Vitreous China,white ,flat back,size 550 x 400mm including brackets and cutting for and pinning in ends of brackets or erecting stand inclduing 15mm bore pillar tap cast copper alloy chromium plated fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe fixed with CP Waste coupling 32m and waste pipe, complete all as specified & directed.

Supply & fix vitreous china squatting pan of ‘Orrisa pattern’ size 580x440mm, white with, integral foot rest including replacement of ‘P’ or ‘S’ trap, lime concrete bedding and making good floor complete all as specified and directed.

Supply & fix in vitreous china urinal half stall type with including providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar , complete all as specified & directed.

Supply & fix in PVC low level flushing cistern of 10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

Supply & fix angular valve, 15 mm bore, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.

Supply & fix bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supply, fix 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply, fix 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply & fix in PVC connections of 450mm long of PRYAG Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply & fix pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.

M&L 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed suitable for Urinals, complete all as specified & directed.

Supply and fixing PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

Supply & fixing steel C.P. grating 100/125 mm dia as reqd at site complete all as directed by Engineer-in-Charge.

S&F for 110 mm bore PVC floor traps plain with grating and 300 mm long out let including jointing with cement concrete type B -1 1:2:4 complete all as specified & directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with aluminium alloy brackets and gaurd and railing 60cm long , complete all as specified & directed.

S& F Brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges, complete all as specified & directed.

S&F Hat and coat hooks, solid body of Brass Choromium plated, 175mm to 250mm long and fixed in repairs, complete all as specified & directed.

S&F Shower rose size 125mm brass with shower arms chromium plated including fixing to steel pipe or union , complete all as specified & directed.

S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified & directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls, complete all as specified & directed.

Supply and fix PVC bends 110mm bore, any radius complete all as specified & directed.

PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore, complete all as specified & directed.

S&F 75mm dia PVC pipe (SWR) single socketed in any length with rubber ring joint, fixed in walls, complete all as specified & directed.

S&F PVC (SWR) bends with access door of radius 75mm dia, complete all as specified & directed.

S&F PVC (SWR) vent cowl bore of pipe 75 mm, complete all as specified & directed.

M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed.

M&L preparation of new plastered surfaces of walls with Birla /JK wall care putty and applying two coats of Oil bound distemper to match the existing surfaces as required, complete all as specified & directed.

M&L preparation of new plastered surfaces of walls etc and applying two coats of Plastic emulsion paint (weather coat) over a coat of primer paint plaster complete all as specified & directed.

M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

S&F machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C1 (20mm stone agg) all as directed by Engr-in-Charge ser in CM 1:6, complete all as specified and directed.

M&L for two coat of synthetic enamel paint on new concrete surface including preparation of surface, complete all as specified and directed.

M&L for connecting 40 mm bore GI pipe from existing water supply line including necessary excavation, clamping making holes to existing pipe line

M&L for Glvanised pipe medium grade 40 mm bore laid in trenches /fixed in wall with all fitting , complete all as specified & directed.

M&L for connecting 25 mm bore GI pipe from existing water supply line including necessary excavation , clamping making holes to existing pipe line, complete all as specified & directed.

S&F of Ball brass valves, high pressure, with polythene float and fly- nut com-plete, scre-wed for iron pipe or brass ferrule and fixed, complete all as specified & directed.

M&L Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 40 mm bore and fixed, complete all as specified & directed.

M&L Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore and fixed, complete all as specified & directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc. , complete all as specified & directed.

Providing precast RCC type C1 using 20mm graded aggregate as in cover slab for man hloes set in CM 1:6, complete all as specified & directed.

M&L for 150mm dia NP2 pipes grade'A' laid in trenches and jointed in CM 1:1 complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore, complete all as specified & directed.

Cutting into existing manholes for connecting new drain pipe and making good to pipe and rendering cutting out existing benching for and forming branch (1/2type B-1 smooth finished, and reforming benching as required] round or 3/4th Section) in cement concrete 1:2:4 channel , complete all as specified & directed.

Dismantling of Vertical Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified & directed.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified & directed.

M&L for mild steel frame work in trusses purlins, posts etc complete using MS angle iron, MS Hollow Square or rectangular sections,flat irons etc complete incl necessary welding cutting to shape & hoisted & fixed in position, incl Dismantling cast iron work of any description complete all as directed & specified .

M&L for pre painted galvatume aluminium zinc GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering fixed with J or L hooks , incl Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc., complete all as specified & directed.

M & L for Plain, galvanised, mild steel sheeting .63 mm, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified & directed.

M & L Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges 1.25 mm thick 150mm dia sheet, complete all as specified & directed.

M&L for prep of old painted steel surfaces & applying 02 coats of syn enamel paint over a coat of red oxide primer of 10cm in width or girth,not otherwise described, complete all as specified & directed.

M&L for three coats of white wash including preparation of new/old surfaces on wall, complete all as specified & directed.

M/L for preparation of old plastered/ unplastered surfaces of walls and applying two coats of white wash, complete all as specified & directed.

M&L for preparation of new surfaces of wall and applying Two coats of 100% Premium acrylic emulsion paint (plastic paint) and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified & directed.

Demolition of Cement concrete (including cutting of reinforcement if any) in any description and any position not otherwise specifically provided for and removing debris out of MOD land, complete all as specified & directed.

M&L for 25 mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) to receive floor finishes etc. ,complete all as specified and as directed.

S&F of Box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete with glazing bars, complete all as specified & directed.

Formwork to sides and soffits of floor or roof beams,lintel beam, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, complete all as specified & directed.

Formwork to edges of concrete flats, Chajja,treads, breaks in floors, window cills, concrete rail?ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon?tal or sloping and similar work exc 10cm but n exc 20cm wid (120mm thick of roof slab), complete all as specified & directed.

M&L for RCC type B1 1:2:4 (20mm graded aggregate) of Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified & directed.

M&L for Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with ma?sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham?fers, weatherings, throat- ing etc. and setting in mortar complete with joints to match set in CM1:4, complete all as specified & directed.

S&F of box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete without glazing bars, complete all as specified & directed.

Supply and fabrication of Mild steel guard bars, grills, grating, and similar work and welded to window frames, door frames (made up of angle), balcony railing confirming to FE 290, gde E-165 etc, complete all as specified & directed.

Demolition of stone masonry /block walling built in cement mortar, complete all as specified & directed.

Dismantling structural steel work in-cluding doors, gates but excluding framed truss etc., complete all as specified & directed.

S & F for Steel rolling shutters, gear operated type with chain wheel and hand chain with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete: push pull or manual type, thickness of laths in 1.25 mm etc complete all as spd and directed.

M&L for Mild steel framed work as in gate, cooler/AC stands etc railings etc using MS angle iron, holo pipes, flat iron, nuts & bolts etc complete all as specified & directed incl necessary welding etc.

All as per item No.120.00 here-in-above, but fancy type articals, complete all as specified & directed.

M & L for Iron plates, any size, of galvanised iron sheet 1mm thick, fixed with galvanised screws in iron gate, complete all as specified & directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified & directed.

M&L for providing precast cement concrete type B-1 1:2:4 (using 20mm graded stone agg) as in kerb stone etc (of any section as approved) with plain faces , including chamfers,weathering,throating etc and setting in cement mortar 1:4 complete with joints to match., complete all as specified & directed.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

M & L for (concealed)/Surface point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLSH cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring, drawn through in and including non-metalic PVC concealed (including Cutting Chases and make good the distrubed surfaces ) conduit of size not less than 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, sutable for One light/Fan/bell point controlled by one, one way switch all as specified, directed and shown on drgs for The rates of chase cutting on wall done concealed conduit and steel terminal boxes are included in the unit rates all as specified and directed by Engr-in-Charge.

All as per srl item no. 126.00 here-in-before but, One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch, complete all as specified & directed.

All as per srl item no. 126.00 here-in-before but with 4.0 sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire for indpendent 15 Amp point, complete all as specified & directed.

All as per srl item no. 126.00 here-in-before but one socket outlet 3 pin 15 amps on the same board controlled by one no 15 Amp switch ISI Marked , complete all as specified & directed.

Supplying fixing for replacement of piano type Switch, single pole, one way, 6 amps, 230 volts, complete all as specified and directed.

Supplying fixing for replacement of Socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, ISI Marked complete all as specified and directed.

Supplying fixing for replacement of Switch piano type, single pole, one way, 16 amps, 230 volts, ISI Marked complete all as specified and directed.

Supplying fixing for replacement of Socket, 6 pin, 6/16 Amp, multipurpose shutter type, 230 volts, ISI Marked complete all as specified and directed

Supplying fixing for replacement of Ceiling rose, three terminals, bakelite body, 230 volts, ISI Marked complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including AC decorative box type with driver, holder ISI Marked including,copper conductor cable of suitable size from ceiling rose complete complete, 4 ft long, complete all as specified & directed.

Supplying fixing and replacement of bldg security LED Light Luminaire of 35 Watts having IP 65 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with and including GI bracket of suitable in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with all security light on building wall connecting cable, complete all as specified & directed.

Taking down and refixing / Hanging only ceiling fan/ Exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan , complete all as specified & directed.

Suppy and fixing exhaust fan, steel Body AC single phase . 230 of size 450 mm sweep Heavy duty with blades, Frame , louvers And All connected as per site required , complete all as specified & directed.

Supplying fixing and ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed by Engineer-in-Charge.

Supplying fixing and replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified & directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supplying fixing and replacement of MCB DB SPN (double door) 16 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed by the Engr-in-Charge.

Supplying fixing and replacement of in repairs sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 6 Sqmm and one run of 6 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc. complete as directed by Engineer-in-Charge.NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid for as one length, complete all as specified & directed.

M&L for in repairs earthing complete with galvanised steel earth electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25m below normal ground level with top edge of the earth plate at a depth not less than 1.5m below ground level connected to and including GI earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 5 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 mm dia with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.

Supply, laying and replacement XLPE insulated, armoured, heavy duty electric cable, aluminium coductor, multistanded 1100 V grade,croos sectional area 16 Sqmm 2 core all as diredted by Engr - in - charge Note : Earth work, sand, PCC Cable cover and protection pipes measured and paid separately

M&L for dry clean fine river sand as in sand cushioning to underground cable including punning down of sand layer all as specified and directed. Note :- Punned thickness shall only be measured and paid.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size 300/250x180mm x40 mm ISI Marked complete and all as directed by the Engineer-in-Charge.

M&L for galvanised steel tubing, light grade, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with all fittings, of size 40 mm bore.

S&F electric storage water heater of capacity 25 litres BEE 5 star rated including proper installing arrangment on wall surface with suitable Anchor bolt faster and Geyser connections for hot and cold water supply made of stainless steel wire braided connrtector with chrome finish heavy duty nuts of 15 mm size with suitable lengh etc complete all as directed by Engineer-in-Charge.

Supply and install desert cooler electric driven (single phase) three speed having nominal air flow capacity 6000 Cum per hour (or nearest size), with propeller ISI cooler fan motor copper winding single phase fitted with / having aluminium blade of minimum size 500 mm , submersible pump, Max power consumption of 325 Watts. Cooler body made out from 20 gauge mild steel galvanized iron sheet & water tank made out of 18 SWG, having capacity 40 ltr minimum including three louvers with wood wool pad, flexible PVC distribution pipes and 3 way junction all as directed by Eng-in-charge and of standard make as approved by GE" NOTE:- (i) Three speed switch ISI Marked rotary type for propeller fan and one way switch pump with separate control. The switches shall have marking off-Low-medium and high. (ii) Float valve on water supply connection shall be deemed to be included in unit rate quoted

M&L for stand, flush to wall for desert cooler, fabricated out of MS angle iron 40mm x 40mm x 06mm, 1.2 meter long bend to shape as top size 600mm x 600mm, duly welded with two members to tie vertical support, including painting two coats of synthetic enamelled paint over a coat of red oxide primer including M&L for steel rack bolts/fastners, 100mm long, 12mm dia - 4 Nos for fixing stand, complete all as specified & directed.

Supply and fixing as MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surface by chase cutting and making good surface of wall all as specified and directed by the Engr-in-Charge.

Supply & fix refrigerator, electrivc dirven (single phase) , Forst free, Smart inverter operation with built-in Stabilizer, capacity not less than 320 Litres with lates BEE 3 Star rated, complete all as specified and directed.

Supply, installation and testing in existing location and position, metal top deep freezer, chest freezer, double door, size 1145mm x 745mm x 900mm, ISO 9001. Temp. CFC free insulation, sunken handle, electric driven, single phase, having double door, approx storage 300 Ltrs and nominal cooling capacity 320 ltrs. BEE Star Rating -5 Star and above rated, complete all as specified and directed.

Supply and fixing ceiling fans complete with blades down rods (as per existing length) and accessories Decorative Type with Fan controller (remote type), Single phase 210V, 50 Hz, 1200 mm sweep Min air delivery 210CMM with service value 6.00 BEE, Five star rated with burshless direct current motor (BLDC), suitable for prestigeous accomodation, Connecting up, complete with and including three core flexible PVC insulated multi stranded copper conductor of size 1.0sqmm from ceiling rose/ conector to fan (earth wire to connected to fan hook ISI marked, all as per directed and specified.

NOTE:- (i)- Quantities are clubbed in BOQ for different Jobs. For which ref. Annexure-I on Sl. page. No. 38 to 40 of tender document. (ii)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

SURESH TRADERS (BID ID -3160476)

SNEH CORPORATION (BID ID -3158719)

Nikhat nirman (BID ID -3156224)

GANGADHAN ENTERPRISES (BID ID -3160876)