Rewiring and replacement of old fixtures with new LED fixtures in the Administrative Block of Dr.RPGMC Kangra at Tanda

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (But without modular switch, modular plate and G.I. box)

Group C

Make : KEI/Plaza/Anchor/ SCI

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2x1.5 Sq. mm.

2x4.0 Sq. mm.

4x4.0 Sq. mm.

4x10 Sq. mm.

Make : KEI/Plaza/BEC/SCI

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3x1.5 Sq. mm.

Make : KEI/Plaza/Anchor/ SCI

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

S.P. 5/6 amps, one way modular switch

S.P. 15/16 amps, one way modular switch

3 pin 5/6 amps modular socket outlet

6 pin 15/16 amps modular socket outlet

Modular bell push, ISI marked

Makes:- L&T/Legrand/Schneider

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

3 module - Modular GI box with Modular base & cover plate

6 module - Modular GI box with Modular base & cover plate

8 module - Modular GI box with Modular base & cover plate

12 module - Modular GI box with Modular base & cover plate

Makes:- L&T/Legrand/Schneider

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Stepped type Modular Fan regulator (2 module)

Makes:- L&T/Legrand/Schneider

Supplying and fixing 6 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

6-32 A, Single pole

Makes:- L&T/Legrand/Schneider

Supplying and fixing 40/50/63 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 A, Double pole

63 A, Four Pole

Makes:- L&T/Legrand/Schneider

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

TPN DB 8 way (8 + 24), Double door

Makes:- L&T/Legrand/Schneider

Supplying and fixing of LED Bulkhead with a nominal system output of 1000 lumens,CCT 6500K Ceiling and wall mount LED bulk head serves as an excellent energy efficient alternative to CFL/incandescent bulkhead luminaires suitable for surface and wall mounting application as required complete with all accessories, connections, testing and commissioning etc.

10 Watt LED Bulkhead

Makes:- Philips/Wipro/Trilux

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, light duty 300mm

Makes:- Usha/Anchor/Bajaj

Providing, installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Ceiling Fan 1200 mm sweep

Makes:- Usha/Anchor/Bajaj

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:-

15 Liter capacity water heater

Makes:- Havells/Bajaj/Racold

Providing and fixing decorative extruded tube fixture having high quality design suitable for LED tube up to 18Watt (1800 lumen) 6500K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz, including one no. tube rod 18 Watt complete with all accessories, connections, testing and commissioning etc. as required. complete in all respects.

LED 18 Watt Tube fixture

Makes:- Havells/Bajaj/Wipro

Supplying and fixing surface round/square type LED 18 Watt (1800 lumen), 6000K made of white powder-coated pressure die-cast aluminium housing and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.

18 Watt LED round surface

Makes:- Panasonic/Wipro/Havells

Supplying and fixing recess mounting following size LED panel suitable for surface application with the use of the latest technology, 5700K made of CRCA housing and it should be compatible with specifications i.e. power factor ≥ 0.95, harmonic distortion ≤ 10% and efficacy ≥ 80 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.as required.

24 Watt LED 1'x1' Recess Panel

36 Watt LED 2'x2' Recess Panel

Makes:- Panasonic/Wipro/Havells

Supplying and fixing surface mounting 4'x1' size LED solution suitable for surface application with the use of the latest technology 36 Watt (3300 lumens), 5700K made of CRCA housing and it should be compatible with specifications i.e. power factor ≥ 0.95, harmonic distortion ≤ 10% and efficacy ≥ 80 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.as required.

36 Watt LED 4'x1' Surface

Makes:- Panasonic/Wipro/Havells

Supplying and fixing of LED flood light luminaire with the use of the latest technology 30 Watt (3000 lumens), 6500K made of CRCA housing and it should be compatible with specifications i.e. power factor ≥ 0.95, harmonic distortion ≤ 10% and efficacy ≥ 80 lumens per watt, CRI > 70, suitable for input voltage AC 150-270V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.as required.

30 Watt LED Flood Light

Makes:- Panasonic/Wipro/Havells

Supplying and fixing of following sizes Pop type flush mounting boxes equipped with push and slide locking system to avoid accidental opening complete with all accessories, connections, testing and commissioning etc.as required.

3 Module - Pop up Box

6 Module - Pop up Box

Makes: Legrand (Cat. No. : 0540 10)/(Cat. No. : 0540 12) or equivalent.

Providing and fixing of following sizes of DLP PVC trunking with flexible cover fit onto the whole branch including internal or external angles for distribution, the protection and the derivation of various cables in an electrical installation as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Trunking Body : 105 x 50 mm / Flexible Cover : 85mm (Width)

Makes: Legrand (Cat. No. : 0104 22)/(Cat. No. : 0105 22) or equivalent.

M/s Jamwal nxt gen energy solutions

pankaj saini