Repair to the Road at various places inside the factory and adjacent to perimeter wall at OFD

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out

M&L for continuous brick edging with width equal to the depth of the brick, laid on end vertically on edge with old sized bricks

M&L for providing 10cm thick (compacted thickness) WBM with coarse aggregates of grading 1 (90 to 40mm size), spread, rolled and consolidated to gradient and camber required with lime stone, sand stone flint or quartzite stone

M&L for Preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags/ compressed air to remove all loose dirt etc. from unsurfaced water bound macadam

M&L for Preparing surfaces by brushing with wire brushes for removing caked mud, loose gravel, dust, dirt etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags/ compressed air to remove all loose dirt etc. from black top surfaces

M&L for Applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre with paving bitumen

Surface dressing by spraying evenly paving bitumen at 20 kg per 10 sq metres, blinding with 12.5mm stone chippings @ 0.14cu.m per 10 sq.m. and rolling to required gradient and camber complete with M&L

M&L for Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal)

M&L for laying Bituminous premix asphaltic semi dense concrete 40 mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient Complete with paving bitumen of any penetration and the carpet will be laid by paver finisher machine.

M&L for laying Bituminous premix asphaltic semi dense concrete 25 mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient Complete with paving bitumen of any penetration and the carpet will be laid by paver finisher machine.