MISC REPAIR OF ALLIED B/R NATURE WORKS IN VARIOUS LABS AND MISC REPAIR/MAINTENANCE OF SECURITY WALL , DRAINS, FOOTPATH AND HARD STANDING, KERB STONE INCL PAINTING AND DRAIN COVERS, BRICKS WORK and OTHER MISC PROTECTIVE WORKS (MS GRILL, BARBED WIRE E

Amount

S&F in repair fancy type stop valve/Angle valve with wall flange , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore etc complete all as specified and directed

S&F in repair Angular fancy type stop valve/Angle valve with wall flange, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore etc complete all as specified and directed Make:Jaguar Cat Part No ORP-CHR-150053PM or equivlent Make approved.

S&F in repair 15mm bore brass chromium plated single lever basin mixture without pop up waste system with 450 mm long braided hoses etc complete all as specified and directed Make: Jaquar Cat Part No. ORP-CHR-10005BPM or equivalent Make approved

S&F in repair 15 mm size two way bib taps with wall flange brass chromium plated,long body with wall flange complete all as specified and directed Make Jaquar Cat Part No ORP-CHR-15041PM or equivlent Make approved

S&F in repair Bib Tap fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of 15 mm bore etc complete all as specified and directed

S&F in repair for 15mm bore brass cromium plated fancy type censor pillar tap or self open/close pillar tapp & with capestan head screwed down high pressure with or without lettred hot or cold with long screw shank & fly nuts etc complete all as specified and directed

S&F in repair for brass chromium plated fancy type towel ring square fixed etc complete all as specified and directed. Make Jaquar Code No ACN-CHR- 1121N or equivalent Make approved

S&F in repair for brass chromium plated fancy type towel rail 600 mm long complete all as specified and directed . Make: Jaquar Code No AKP-CHR-35711P or equivalent make approved

S&F in repair for brass chromium plated fancy type towel rail 600 mm long complete all as specified and directed.

S&F in repair coloured Table top wash hand basin with cabnet box including looking mirro , PVC connection & waste pipe 32mm dia, CP coupling etc fixed as in table top WHB etc complete all as specified and directed. Make Jaquar cat part No CNS-WHT-601 or equivalent make approved

S&F in repair coloured Table top wash hand basin size 635x415mm of with PVC connection & waste pipe 32mm dia, CP coupling etc fixed as in table top WHB etc complete all as specified and directed. Make: Jaquar cat part No JDS-WHT-25001 or equivalent make approved

S&F in repair for white EWC with single piece with flushing cistern intigrated complete all as specified and directed. Make : Jaquar Cat Part No LYS-WHT-38853S-220MM or equivalent in Hindware/Parriware

S&F in repair PVC connection 45/60 cm long with brass check nuts on both sides suitable for 15 mm bore iron pipe etc complete all as specified and directed.

S&F in repair brass chromium plated toilet Paper Holder with Flap complete all as specified and directed. Make : Jaquar code:AKP 35711P or equivalentmake approved

S&F in repair Stainless steel Grating Square /Round size 125mm with or with out hole complete all as specified and directed. Make : Viking/Chilly

S&F in repair chromium plated soap dish fixed to wall with CP brass screws etc complete all as specified and directed.

S&F in repair Stainless steel (AISI 304 grade) Satin finish automatic hand dryer complete all as specified and directed.Make : KOHLER Cat Part No K-5486T / Jaquar Cat Part No HDR-SAP-M99ACS or equivalent make approved

S&F looking mirror 5.50 mm thick of superior quality, any size, with approved border design fixed with commercial plywood 6 mm thick or AC board and with teak frame fixed in repair complete all as specified and directed . Make : Modiguard/Saintgobain Note : Design and quality as approved by GE/Engineer-in-Charge at the time execution.

S&F in repair Corner self 12" made out of 5 to 7 mm thick superior quality glass with CP brackets and railing fixed etc complete all as specified and directed. Make: Jaguar CAN-CHR-1173(with braket) or equivalent in Essel/Swiss or equivalent make approved

S&F brass chromium bottle trap (with internal partition) 32mm size with 300 mm & 190mm long wall connecting pipes & wall flange complete all as specified and ditrected. Make - Jaguar - Cat Part No ALD-769L300X190 /or equivalent make approved

S&F in repair Push Button Soap Dispensers with ABS body of capacity 0.80 ltr complete all as specified and directed. Make : Jaquar code:AKP-GLD-35735P or equivalent in Parryware

S&F in repair chromium plated health faucet, teliphonic type,with CP flexible arms and Jet,of approved make, suitable to fixed to 15mm bore CP angle valves, etc complete all as specified and directed. Make Jaquar cat Part No ALD-CHR- 573 of equivalent make approved

Supply and fixing in repair toilet paper holder Chromium Plated as approved complete all as specified and directed .

Supply and fixed in repairs PVC waste pipe for WHB/Urinal/Sink of any flexible length with union etc complete all as specified and directed .

S&F 500 ltr capacity 3-layer heavy duty blow moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20 mm dia PVC float valve incl dismantling old Water tank complete all as specified in SSR Pt-I and all as specified and directed.

S&F 1000 ltr capacity 3-layer heavy duty blow moulded polyethylene water storage tank, (cylindrical vertical with closed top) hoisted and fixed in position incl 20 mm dia PVC float valve incl dismantling old Water tank complete all as specified in SSR Pt-I and all as specified and directed.

Taking up or down 15 mm bore steel tubing & connection etc complete all as specified and directed.

Taking up or down 20 mm bore steel tubing & connection etc complete all as specified and directed.

Supply and fixed steel water tubing 15 mm bore, medium grade , galvanised with all fittings and fixed complete to walls and ceiling or laid in floors including cutting in wall /floor for pipe etc complete all as specified and directed.

Supply and fixed steel water tubing 20 mm bore, medium grade , galvanised with all fittings and fixed complete to walls and ceiling or laid in floors including cutting in wall /floor for pipe etc complete all as specified and directed.

Supply and fix 32 mm dia 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified. Note:- Cutting chases for concealing the pipes & fittings etc wherever required and making good, disturbed surface in Cement mortar 1:3 complete shall be included in the quoted rate.

All as per item No 31.00 above but 20 mm dia.

Supply & fixing in repairs vitreous china wash down water closet pedstal pattern white excluding fixing bolts, flushing cistern and flush pipe complete but including PVC seat cover with aluminium hinging devices & EWC CP Jet chromium plated with 1.00 mtr long PVC connection pipe etc complete all as specified and directed. Make : Hindware/Parryware/CERA

Supply and fixing for WC Orissa pattern size 580 x 440 mm of vitreous china (white) fixed with all accessories including integral footrest including taking down old WCs etc complete all as specified and directed. Make : Hindware/Parryware/CERA

Supply and fixing in repair PVC low level flushing cistern 10 ltr capacity sleek having weight not less than 1.80 KG including PVC bend, supporting brackets and complete accessories white colour complete all as specified and directed. Make:- Hindware /Parryware/CERA.

Supply and fixed in repair urinal, Half stall type,white with grating, union for discharge pipe, flush pipe and waste pipe, CP urinal Spreader fixed to water supply pipe etc complete all as specified and directed.

Supply and fixed in repair 10mm thick glass urinal partition of size 450 x900mm etc complete all as specified and directed.

M&L for dismantling of floor tiles / hearth of wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises etc complete all as specified and directed.

M&L for non-skid coloured ceremic tiles 7 to 8 mm thick, in light shade, (Square/rectangular) joint less / joint free, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in colour of cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed

M&L for vitrified ceremic tiles 9 to 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in colour of cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed

M&L for vitrified ceremic tiles 9 to 10 mm thick, double charge in light shade,(Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in colour of cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed

M&L for 7-8 mm thick glazed ceramic designer coloured tiles, area of each tile not exceeding 0.36 sqm on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointing in white or coloured cement to match the surface over 10mm thick rendering in CM (1:4) on brick wall complete all as specified and directed

M&L for glazed ceramic designer coloured tiles of size 450x300x7-8 mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointing in white or coloured cement to match the surface over 10mm thick rendering in CM (1:4) on brick wall complete all as specified and directed.

M&L for glazed ceramic designer coloured tiles of size 600x300x7-8 mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointing in white or coloured cement to match the surface over 10mm thick rendenring in CM (1:4) on brick wall complete all as specified and directed.

Demolition of wall and ceiling board with frame work of ceiling (Fibre,pulp,insulation etc.) or insulation board /slab/blankets any thickness including cover fillet etc complete all as specified and directed.

S&F roof ceiling with minimum 0.5 mm thick tiles size of 600x600mm with including provison of GI powder coated grid moudle of 600mm x 600mm size complete with GI powder coated grid consiting main runner suspended at 1200 mm centre to centre and cross runner T section suspended of 600mm centre to centrre suupported by 4mm GI rod from ceiling surface including steel fastner and GI powder coated wall. Note : The sample of gird material and ceiling tiles alongwith fixing plan shall be got approved rom the GE(I) R&D before procurement of the Material.

S&F powder coated Gl frame work for roof ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers rod of 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including 9 to 10 mm thick gypsum ceiling tile/board of size 600 x 600mm decorative type with silver foil coating on back side of ceiling board for insulation and accoustic purpose, fixed with staple with on snap grid and 4mm dia GI wire with nuts, bolts , adjustable arrangement & washers etc complete all as specified and directed.

Dismentling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Material and labour for 18 to 20mm thick granite stone slab as in floor or shelves, over cooking platform,machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, moulding and polishing and beveling half round edges of stones laid over 15 mm thick sereed bed in CM (1:6) etc complete all as specified and directed.

Material and labour for 18 to 20mm thick granite stone slab on vertical surfaces such as skirting/dado etc set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone and beveling half round edges of stones fixed over and incl rendering 10 mm thick CM (1:3 ) etc complete all as specified and directed.

Cutting openings, through brick walls built in cement mortar, for door, windows and other openings or enlarging existing openings, converting window into door openings, etc. including providing, fixing and removing shoring, cleaning stacking bricks, removing surplus serviceable bricks,hard core, etc. to store and rubbish off the premises not exc.50 mtr complete all as specified and directed .

Taking down chowkhats or frames n.exc 1.5 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified and directed.

Taking down chowkhats or frames Exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exc 2.00 Sqm each complete all as directed.

Supply and fixed 2nd class hard wood plain, solid, straight, chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints. All as specified and directed

S&F 35 mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specsified & directed.

Material and labour for Melamine polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats etc complete all as specified and directed .

Supply and fixed 100 mm size cast brass with mild steel hinge pin bright polished and fixed, type B-11 fixed/ welded to frame complete all as directed.

Supply and fixed 200 mm long,brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts etc complete all as described.

Supply and fixed 300mm long brass, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

Supply and fixed brass handles cast type 150mm size complete all as specified and directed.

Supply and fixed 150mm long Floor door stopper of brass body and anodised , with hard drawn steel spring. Fixed in floor,complete all as specified.

M&L for aluminum alloy powder coated (50 micron) anodized door frame of section 100 mm x 44 mm x 2mm thick,door shutter of aluminum section of size 85 mm x 44 mm x 2 mm thick, top rail and both styles of size 100mm x 44 mm x 2mm thick,lock rail and bottom rail of size 115 mm x 44 mm x 2 mm thick incl. aluminum anodized snap beading and rubber packing & 5.0 mm thick colour designer glass incl. , 200 mm long tower bolt-2 Nos, 200 mm long aluminium handle- 02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock(Make : Godrej), & double action floor door spring(Sandhu/Samrat) heavy duty suitable for 1 m wide shutter for each leaf complete all as specified and directed.

S&F powder coated aluminium window shutters of aluminium section of size for all member size 47.50x44.40x1.60mm thick with frame made out of hollow aluminium section size 63.5x38.10x1.60mm thick suitable for aluminium shutter having two Nos aluminium hinges 100mm long, 100mm size aluminium handle and two nos 150mm long aluminium tower bolt and glazing with 4.8 mm thick sheet glass ordinary quality in square exceeding 0.5 sqm each pane coloured and fixed with glazing clips/ pins rubber beading and aluminium beading etc complete all as specified and directed.

M&L aluminium alloy powder coated (50 micron ) anodized frame of section 85 mm x44 mm x2 mm thick as in aluminium partition including aluminium anodized snap beading and rubber packing ,partly glazed with 5 mm thick tinted glass and partly with 12 mm thick prelaminated particle board complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair aluminum alloy door closer hydraulically regulated, desination No 2 universal type, suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 Kg and fixed to door frame complete all as specified and directed.

Hacking out old broken glass (any thickness) size quality or description from wooden/steel frame complete all as specified and directed.

S&F in repair 5.00mm thick tinted glass with glazing clips rubber beading and aluminium beading for aluminium door /window area exc 0.5 sqm complete all as specified and directed

S&F in repair 5.00mm thick reflector sole sheet glass with glazing clips rubber beading and aluminium beading for aluminium door /window area n.exc 0.5 Sqm complete all as specified and directed

S&F in repair 12mm thick prelaminated particle board with glazing clips rubber beading /gasket and aluminium beading for aluminium door complete all as specified and directed

S&F in repair any size brass mortice lock six levers with duplicate key for aluminium door , complete all as directed.

S&F wooden flooring of 8mm thick size 1216x192mm with interlocking pannels with plastic and silicate mixture as the core material and surface with PVC foil on the top with thickness of 10mm width of 200mm and length of 2.74/3.05 (9'x10') meters , small embossed surface with glossy finishas per manufacturer instruction including taking down old wooden flooring complete all as specified and directed. Make : Armstrog/BRUCE/MOHAKIK

S&F L/H/U profile and corner profile molding with fillet at top ,bottom and corner to hold the wooden flooring and wall panelling with exactly the same shade as that of the flooring planks as per manufracturer instruction complete all as specified and directed.

S&F wall panneling of wooden WPC as per approved sample 8mm thick size 1216x192mm with interlocking pannels with plastic and silicate mixture as the core material and surface with PVC foil on the top with thickness of 10mm width of 200mm and length of 2.74/3.05 (9'x10') meters, small embossed surface with glossy finish including taking down old wooden flooring complete all as specified and directed.

S&F in repair 10 mm thick toughened frosted glass door with side & Tops glass fixed with openable door , comprising of height 2100 mm and width 1000 to 1200 mm ( as required at site) with pivot door of appropriate width including stainless steel chrome finish hardware fitting , floor machine and all fittings as required including and fixture as per manufacturer's instructions complete all as specified and ditrected.

S&F toughened frosted glass of 10-12mm thick fixed with aluminium powder coated frame including accessories i.e. rubber beading, aluminium clip/beading including grounting/fixing logo/emblem on glass of upto 600mm dia sample given by Engr-in-Charge complete all as specified & directed..

S&F in repair rolling vertical venetion blind consisting of aluminium head rail, of approved tint and traverse cord complete fixed in position all as specified, Make: VISTA/MAC or Equivalent approved.

S&F in repair double rolling vertical venetion blind consisting Flip cover of aluminium head rail, of approved tint and traverse cord complete fixed in position all as specified. Make: VISTA/MAC.

S&F in repair for vertical venetian blinds consisting of aluminium head rail vanes/ louvers of 100 mm wide of approved tint and traverse cord fixed in position. Make - VISTA/MAC or equivalent approved make.

Supply and fixed Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet reinforced with M.S. Square tube and fixing in opening as per specification & drawing etc complete all as specified and directed.

Material and labour Factory made solid panel PVC wood grain printed door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side &as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togethers with solvent cement & fixing the frame at site. complete all as specified & shown in drg of SSR and directed

Supply & fixing of mild steel butt hinges 100 mm long medium weight complete all as specified and directed.

Supply & fixing aluminium anodised extruded fabricated type handle 150mm long complete all as specified and directed.

Supply & fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250 mm long and fixing with bolts extruded sections complete all as specified and directed.

Supply and fixed 200 mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

Taking down of Aluminium door/window shutter of any description area of each shutter not exceeding 1.5 sqm and refixing in same opening after carry out necessary repair including oiling, tightening the joints/bolts , fixed to floor spring / hinges, rubber beading, aluminum beading, handles, sliding bolts, hings, tower bolts etc complete all as specified and directed. NOTE: (i) Floor spring to be paid under relevent Item of this schedule. ii) Rate should incl all T&P required for repair incl fixing of rubber packings, screws etc complete to make good the shutter all as directed.

All as per item No 87.00 above but area exceeding 1.5 sqm and n exc 4.00 sqm.

Taking down for repair only of Rolling shutter / collapsible gate of any size, description, position, make serviceable by easing with greasing, repair of rollers, welding including accessories and re-fixing in the same opening after making serviceable complete all as specified and directed Note : Rate shall be included all T&P required for repair to make good the shutter/gate.

Supply and fixing in repair double legged door stopper of aluminium alloy with rubber base, 150mm long complete all as specified and directed.

S&F for Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets including taking out old collapsible door ,complete all as specified and directed

S&F powder coated anodised aluminium frame / shutter frame for door, window,ventilators with one or more rebates including joining cleats for fixing etc complete all as specified.

S&F sound proofing tempered ordinary quality glass of 5.50 mm thick fixed on Aluminium frame in double layered at on place with 5mm gap to absorb sound including fixing all acessories complete all as specified & directed.

Easing of door shutters of size exc 1.5 sqm & n.exc 2.00 sqm each for easy closing/opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed

Easing of window shutters, kitchen cupboard shutters, show case shutter drawersup to size of 1.5 sqm including fixing of screws adjusting handles, knobs tightening piano hinges including misc small adjustments complete all as specified and directed.

All as per item No 95.00 above but for steel windows repair by welding, filing etc complete work for smooth closing/opening of windows

S&F in repair MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, org alvanised wire staples or incl wooden beading & necessary welding to steel windows complete all as specified.

S&F in repairs for sheet glass 3 mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane including hacking out old broken glass any thickness complete all as specified.

M&L for 19/20mm thick prelaminated particle board interior grade prelaminated on both sides with decorative choice lamination fixed with screws to timber framed work including dismantling of old unserviceable boarding any description complete all as specified.

S&F continuous (Piano) hinges, mild steel bright finish or electro galvanised (widthof flap when open 30 mm) as in repair complete all as specified.

S&F 30 mm dia, cupboard knobs fancy type fixed with nutscrew and washer of mild steel, bright finished complete all as specified and as directed.

M&L for removal of plant growth n.exc 30cm girth by injection with chemical glyphosphate solution (4% concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30mm . The area shall then be sprayed with solution 25ml glyphosphate (4% conc) diluted with 1 ltr of water. All roots of plants shall be removed completely and making good the disturbed surface with matching the existing surface all as specified and directed..

M&L for APP polymaric water proofing membrane minimum 3mm thick and weighting not less than 3.6 kg / sqm black finished reinforced with non woven polyster matt,with fusable finish laid over compatable bitumen primer at the rate of 0.35 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with a over lap of 75mm at the sides and 100mm at the ends and sealing incl applying a coat of cold emulsion bituminous primer all as per manufactur's instructions incl taking down existing treatment and preparation of surface and 15 mm thick cement screed in CM 1:4 on roof of concrete surfaces finished even and smooth without using extra cement with mixing of water proofing compound complete all as specified & directed. Note : (i) Water proofing treatment shall be carried out by the manufacturer or their authorised applicators. (ii) WPC shall be measured & paid seperately.

Supply only integral water proofing compound (ISI marked).

Material and labour for draining out water, cleaning by removing silt/sludge, all scales, dust from RCC/AC/PVC water storage tank upto 500 ltres capacity from mouth of circulating pipes by using cleaning chemical and writing letters of height not less than 10 cm with white synthetic enamel paint in rectangular box 300mmx200mm with black back ground such as date, month & year of cleaning including removing old waste/dust complete all as specified and as directed.

All same as per item srl NO 105.00 above but of capacity exc 500 ltrs but n.exc 1000ltrs

Taking down concertina coil any size including concertina coil complete all as specified.

S&F GI concertina coil fencing with punched tape, 730mm dia, 8-10m openable length having 56 turns per coil, having 50 Nos rounds per 6m length, including binding wire complete all as specified.

S&F GI concertina coil fencing with punched tape, 980mm dia, 12-14m openable length having 56 turns per coil, having 50 Nos rounds per 6m length, including binding wire complete all as specified.

Taking down barded wire / Punched tapes including concertina coil complete all as specified.

S&F Punched tapes wire fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed (each line wire to be measured).

S&F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed (each line wire to be measured). Note for item No 106.00 to 111.00 :- 1. Rate also includes necessary tools & plants including scaffolding to carry the work at 2.5 to 4.0 mtr ht of RCC/Bricks security wall.

Demolition of PCC of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for PCC type B-1 (1:2:4) (using 20mm graded stone aggregate) as in coping including water through and the like weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and as directed.

M&L for plain cement concrete, type B-1 (1:2:4) (using 20mm graded stone aggregate) complete of broom finish as in path/sub base complete all as specified and as directed.

M&L PCC (1:3:6) Type C-2 (20 mm graded stone aggregate) as in plinth protection/path 75 mm thick laid in bays incl finishing the concrete surface even and smooth w/o using extra cement complete all as specified & directed. Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 50 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen VG-10 and 1:2 mix by volume.

S&F factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. complete all as specified and directed. Note: length of finished kerb edging shall be measured for payment.

M&L for applying two coat of synthetic enamel paint over new /old concrete/plastered surfaces along with preparation of old surfaces of any description over 10cm width or girth with priming paints complete all as specified and as directed.

Material and labour for pre-polished coloured chequered cement concrete tiles 30cm X 30cm X 25mm thick, with white cement and pigments, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 complete all as specified and directed. Make : CECO/Terafirma

M&L for 10mm thick anti skid pavement tiles (heavy duty) of area n.exc 0.18 sqm each of approved colour & shade & antiskid finish set and jointed in neat cement slurry and pointed in white cement & pigment to match laid over & including 20mm thick screed bed in CM 1:4 complete all as specified & directed

Demolition of brick work built in cement mortar of any description complete all as specified and as directed.

M&L for brick masonry with sub class `B` brick straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

All as per ser item No 122.00 above but except bricks complete all as specified and as directed.

M&L for brick work with sub class `B` brick straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and as directed.

Taking down cement plaster from brick or stone wall including racking out joint, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for Rough cast plaster including 15mm thick rendering in CM (1:3) on brick work or concrete surfaces complete as specified in SSR part -I clause 14.22 complete all as specified and as directed.

M&L for 15 mm thick Rendering on brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for two coats of acrylic exterior emulsion weather proof paint of any tint including priming with alkali resistant primar paint on external cement plastered surfaces of wall complete all specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint of approved shade/tint over one coat of primer complete all as specified and as directed.

M&L for GRC wall cladding over 10mm thick rendering in CM (1:3) on external wall at height upto 3.00 mtr including taking down old GRC wall cladding and removing from site out side MoD land complete all as specified & directed.

M&L for 15mm thick rendering on brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L 10 mm thick cement plaster in CM (1:3) as in roof slab / soffits of slabs/Chajja/ Sunshade finishing the plastered surface even & smooth w/o using extra cement complete all as specified and directed.

M&L for two coats of old bound distemper on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for applying two coats of distemper oil emulsion over two coat of wall care putty (100 thick each coat) on wall incl preparation of surfaces etc complete all as specified and directed.

Dismantling structural steel work including doors, gates, angle post but excluding framed truss etc complete all as specified and as directed.

S&F MS angle iron in fencing posts & struts including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary, drilling, bolting or riveting etc and similar work conforming to Fe-410 or Fe 310-0 complete all as specified and as directed. Note: (i) Rate are deemed to be included for works carry out on security wall from height 2.5 to 3.5 mtr including necessary T&P and scaffolding etc.

S&F MS framed work as in doors or gate of angle or other section with gusset plates rails braces etc complete drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and pintle hinges or steel hanging door fitting and hanging also fastening and fixing complete all as specified and as directed.

S&F MS plain black sheet in steel gates etc cut to size holes punched, including screw clout nails riveted & welding etc (thickness of sheet 1.60mm) complete all as specified and as directed.

Supply & fixing framed work such door, grill railing, cattle trap on open drains using mild steel angle iron, framed guard bars; barred iron doors; ladders; framed balusters; wall ways; railings; framework of water tanks and similar work, MS flats of sizes as directed with and including provision of MS hinges and MS Hold fast fixed complete all as specified and as directed.

S&F steel work in tubular trusses including frame work for ACP board with special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specified and as directed .

M&L for preparing new steel surfaces over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F in repair Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.

S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.

M&L for 80mm thick pre-cast PCC coloured designer inter locking tiles/ paver block with grey cement and pigment any shape & size confirming to IS-15658 -2006 M-40 grade including 40mm thick sand cushioning layer complete all as specified and as directed.

M&L for precast concrete coloured designer interlocking paver block any shape and size confirming to IS-15658 - 2006 of 60mm thickness M-35 grade with grey cement and pigment laid over 40 mm thick sand cussioning complete all as specified.

M&L for taking out interlocking tiles (of any thickness) and shape and re-fixing/re-laying on same place/portion after cleaning in all respect over and including 40mm thick compacted sand cushioning layer all as specified & directed

Demolition of reinforced cement concrete as in drains or manhole covers of any description and in any position not otherwise specifically provided for complete all as specified and as directed

S&F Factory made precast heavy duty drain/manhole covers with MS frame and reinforcement (size Square/rectangular/circular with ring) complete all as specified and as directed. Make : SS/Uttam/HD

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in slab supported on walls, landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, hangers, shelves and similar articles with plain faces including chamfers weathering, throating etc and set in cement mortar 1:4 incl formwork complete with joints to match etc complete all as specified and directed.

M&L for reinforcement steel (TMT bars) 10mm dia and over in reinforcement for concrete, cut to length, bent to required shape including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Use and waste form work to soffits of suspended slab, such as roof slabs, floors slabs, not exceeding 200 mm thick (Horizontal or sloping) complete all as specified & directed..

Supply and fixing Stainless steel ( Grade 304) hollow tube of round or square pipe of any dia /size fixed as in posts / railing with knock-down fixing system & Top Mounted Round Baluster made of 38 to 50mm mm dia Stainless steel 304 Grade ,channels, plates etc, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc, of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge including taking down old grills and make good the surfaces as required complete all as specified and directed.

Supply & fixing of various 3-D letters (Alphabets A to Z or numerical 1 to 9) made of stainless steel metal wall thickness 1.50mm (AISI 316 Grade) 25mm thick & 400mm to 450mm high as per requirement (width may vary proportion to height fabricated as per design as directed along with steel fasteners of appropriate size to fix on wall surface complete all as specified and directed.

M&L for cleaning of open storm water drains by excavation / removing mud, grass etc and sweeping the sides and bottom of drains including removal of rubbish out side of MoD land in low laying area and refixing of drain cover complete all as specified and as directed.

All as per item No 154.00 above but covered as under culverts cover slabs or RCC pipe of any dia with hume pipe etc complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed

S&F in plain repair polycarbonate Fibre glass reinforced translucent sheeting with three layer fixed with self coach screw , aluminium beading/strip (T&L type) and rubber beading on top of roof dome, wall at any height complete all as specified and as directed.

M&L for Running welding to hinges of steel window/pressed steel door steel ladder and making good for opening of doors/window shutters thickness of metal to be welded exc 6 mm but n exc 9 mm all as directed

M&L for welding exc 2.5 cm but n.exc 5 cm in length and making good thickness of metal to be welded exc 6mm but n-exc 9mm complete all as specified and as directed.

M&L for treatment of soil under existing floor /plastering wall using chemical emulsion @ 0.5 ltr per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortor 1:2 to match the existing floor complete all as specified and as directed.

M&L for treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based emulsion) @ 0.5 ltr per hole by drilling 6mm dia holes at a downward angle of 45 degree and sealing the same complete all as specified and as directed.

S&F stainless steel plate rack of size and design as approved of Engr-in-Charge made out of 1.00mm thick stainless steel (Salem sheet) of size 600wide and 800mm height as per manufacturer specification complete all as specified and directed.

S&F aluminium anodized partition wall or fixed type window/ventilator made out of aluminium anodized standard hollow section 100x40x1.60mm thick snap fit beading standard rubber gasket 5.5mm thick glass or 12mm thick prelaminated particle board , interior grade prelaminated both side with decorative choice lamination & other side balancing light grey lamination including taking down old partion wall etc complete all as specified and directed

M&L for taking down old glass putty from glass of any description in existing steel frame and fixing new glass putty on same area complete all as specified and directed.

S&F in repairs extruded aluminium alloy handles, fabricated type, anodised 125 mm size all as specified.

S&F in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repairs 100 mm long aluminium anodised hasp and stapple safety type including bolt to hinge plate fixed with screws complete all as directed

S&F in repairs MS steel window handles, 100mm including welding if required complete all as specified and as directed.

S&F in repair MS Butt hinges medium wt of size 100 mm complete all as specified and as directed.

All as per item No 171.00 above but size 75 mm complete all as specified and as directed.

S&F in repairs 300 mm long aluminum alloy anodised sliding door bolt with hasp staple (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section all as directed

S&F in repairs aluminium sheeting 1.00 mm thick & width of sheet upto 600mm fixed to wooden shutters or crumpled joint on concrete or brick wall with self tapping screw or fastener CP screw including cutting to required size upto G+6 floor etc complete all as specified and as directed.

S&F in repair 9 mm thick plywood, grade BWR type BB fixed with screws to timber frame complete all as specified.

S&F in repair mild steel barrel tower bolts stove enamelled with bright bolt length of bolt 200 mm all as specified and directed.

All as per item srl No 176.00 above but length of bolt 150 mm.

S&F in repair 300 mm, mild steel ordinary rat rail rod pattern springs including roller plate complete all as specified and directed.

M&L for taking out old bitumen joints of any type from roof surfaces and filling the same with new bitumen grade B including two coat of bitumen primer to existing surface before filling the joints and after filling the joints applying two coat of aluminium silver paint as per manufacturer instruction complete all as specified and directed.

boon construction company

R.K ENGINEERS & CONTRACTORS

ASHISH GARG AND COMPANY

V.V CONSTRUCTIONS

DP COMPLEX

JM enterprises