SPECIAL REPAIRS TO OR GOVT MD ACCN BLOCK NO P 11 01 TO 06 AND P 12 01 TO 06 AT YADUNATH COMPLEX OF AD REGT UNDER GE SOUTH AMBALA CANTT

Amount

SCHEDULE A PART I (B/R WORKS) Taking down cement or cement lime plaster, of any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of debries to distance exc 250 mtr and n exc 500 mtr complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:4, finished even and smooth without extra cement all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6, finished even and smooth without extra cement all as specified and as directed.

Material and labour for rendering 5 mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar 1:3, finished even and smooth without extra cement all as specified and as directed.

Material and labour for preperation of newly plastered surfaces of walls and applying two coats of interior acrylic emulsion over a coat of primer complete all as specified and as directed.

Material and labour for preperation of old plastered treated surfaces of walls and applying two coats of interior acrylic emulsion paint complete all as specified and as directed.

Material and labour for preperation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Material and labour for preperation of old plastered treated surfaces of walls and applying two coats of white wash complete all as specified and as directed.

Material and labour for preperation of new plastered surfaces of walls and applying two coats of exterior acrylic emulsion paint complete all as specified and as directed.

Material and labour for preperation of old plastered treated surfaces of walls and applying two coats of exterior acrylic emulsion paint complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, including stacking of servisable bricks and removal of debries to distance exc 250 mtr and n exc 500 mtr complete all as specified and as directed.

Material and labour for brickwork, with subclass 'B' bricks, straight or curved on plan to any radius, exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as above Item No 12.00 but except bricks complete all as specified and as directed. Note: Old serviceable bricks as obtained from serial item No 11 hereinbefore shall be reused after cleaning the bricks. The rate quoted shall include for cleaning the bricks also.

Material and labour for brickwork, with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.

All as above Item No 14.00 but except bricks complete all as specified and as directed. Note: Old serviceable bricks as obtained from serial item No 11 hereinbefore shall be reused after cleaning the bricks. The rate quoted shall include for cleaning the bricks also.

Demolition of reinforced cement concrete of any description and in any position including reinforcement cut as required to facilitate demolition including removal of debries to distance to distance exc 50 mtr but n exc 100 mtr complete all as specified and as directed.

Material and labour for RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregates, in slabs supported on walls, beams and colunms in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete specified and directed.

Material and labour for mild steel TMT bars Fe 500/550D, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for mild steel TMT bars Fe 500/550D, 6 to 8mm dia, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for providing and laying 3mm thick APP(atactic polypropylene polymer) modified prefabricated, five layer, weight not less than 3.60 kg/Sqm, water proofing membrane, black finish, reinforced with non woven polyster matt, make as approved, with termofusable finish laid by force aopplication after applying a coat bitumious primer @ 0.40 ltr/ Sqm by the same membrane manufacturer of density 0.87 to 0.89 kg/ltr at 25' C temprature and viscosity 70-160 cps over the primer coat with overlap of 100mm at the sides and 150mm at the end, ceiling including a tack coat of hot blown bitumen 85/25 @ 1.2Kg per Sqm below APP and two coats of water proofing paint with aluminium finish on top of laid APP surfaces including preparation of surface over and including 40mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregates as in levelling course etc., including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,etc. and brushing the surface with neat cement slurry @ 3.0kg of cement per sq. metre including taking down of all brick tiles with tar felt and mud phuska if any and removal from site and cleaning the surface with water complete all as specified and directed. The vital physical and chemical parameters of the membrane shall be as under :- (i) The layer membrane shall be laid using butane gas torch and sealing all joints etc after preparing the surface complete as per standard practice all as per manufacture's instuctions(ii) Joint strength in logitudinal and transverse direction at 23'Cat 650/450 N/5 cms(iii) Tear strength in logitudinal and transverse 150'C when tested in accordance with ASTM (d-5147)(iv) The laying of membrane shall be got down through the authorised applicator of manufactures of membrane only. Note:- The contractor will carry out ponding test after application of APP treatment before claiming payment.

Demolition of cement concrete (unreinforced) of any description, in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) including removal of debries to distance to distance exc 50 mtr but n exc 100 mtr complete all as specified and as directed.

Material and labour for 25mm thick PCC (1:2:4) type B1, using 20mm graded crushed stone aggregates, as in sub base finished even and fair complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing selviceable tiles to store and removal of debries to distance exc 250 mtr and n exc 500 mtr complete all as specified and as directed.

Material and labour for premium quality, joint free, non skid light coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.06 sqm and not exceeding 0.11 sqm and 7 to 8 mm thick, laid in floor over and including cement screed bed 15mm thick in cement mortar (1:4) and set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including roughening surfaces of floor by picking, sweeping clean and washing down with water to remove dust,etc. and brushing the surface with neat cement slurry @ 3.0 kg of cement per sq. metre complete all as specified and directed.

Material and labour for premium quality, joint free, non skid light coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm and 7 to 8 mm thick, laid in floor over and including cement screed bed 15mm thick in cement mortar (1:4) and set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including roughening surfaces of floor by picking, sweeping clean and washing down with water to remove dust,etc. and brushing the surface with neat cement slurry @ 3.0 kg of cement per sq. metre complete all as specified and directed.

Material and labour for premium quality, joint free, non skid light coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm and 7 to 8 mm thick, laid on vertical surfaces of skirting/dado, over and including rendering 10mm thick in cement mortar (1:3) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material and labour for premium quality, joint free, printed glazed coloured ceramic tiles of size 300x450x7mm thick on vertical surfaces of walls such as skirting, dado, riser to steps etc. over and including 10mm thick plaster in cement mortar (1:3), set, jointed in neat cement slurry @ 3.0 kg of cement per sq. metre and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for machine cut granite stone slab 16-18 mm thick , laid in as in kitchen slab/platform, steps, cills etc , over and including cement screed bed 15mm thick in cement mortar (1:4) base set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) including rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Material and labour for machine cut kota stone slab 16-18 mm thick ( size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 20mm thick in cement mortar (1:4) base over 25mm thick PCC (1:2:4) type B1 (using 12.5 mm graded stone aggregates) set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed.

Material and labour for machine cut kota stone slab 16-18 mm thick ( size of each stone not less than 55cm x 55cm), laid on vertical surfaces of skirting/dado, over and including cement screed bed 10mm thick in cement mortar (1:3) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material and labour for writing letters or figures (Block.Roman, Italic or Indian) n exc. 30 cmhigh complete all as specified and directed.

Material and labour for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete complete all as specified and directed.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil for ATT including returning filling after treatment complete all as specified and as directed.

Material and labour for PCC (1:4:8), type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Material and labour for PCC (1:2:4) type B2, using 40mm graded stone aggregates, as in surface channels and drains finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for precast reinforced cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates, in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and setting in mortar cement mortar (1:4) with joints to match complete all as specified and directed.

Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/ stopped ends etc, complete all as specified and as directed.

Material and labour for 50mm thick PCC 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregate), as in plinth protection/PCC path and paving, laid in panels of area not exceeding 1.20 sqm with 12mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for PCC 1:2:4, type B1 (using 20 mm graded mechanically crushed stone aggregate), in lintels upto 1.5m clear span cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Supply and fixing of pressed steel frames for doors of size 125x60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm MS FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 4 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0 filling in frame and for holdfast, 2 Nos 12 mm dia tie bars at the bottom of frame and one shop coat of red oxide primer ,complete all as specified and as directed.

Material and labour for factory made second class hard wood, 35mm thick, plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour for second class hard wood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, elc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

Supply and fixing in repair of sheet glass, 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm. in each pane complete all as specified and directed.

Supply and fixing in repair of figured glass, 4mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane complete all as specified and directed.

Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Material and labour for mild steel sections in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles including providing a shop coat of zinc chromate primer conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Material and labour for preparing surfaces of wood and wood based materials,steel and iron work/new or old, of any description and girth, not otherwise described, and treating ends of posts, backs of chowkats, etc., with tar or coal lar black paint area tarred exceeding 0.1 sq. m but not exceeding 0.5 Sq. m each complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described including knotting and stopping and applying one coat of approved colour synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, complete all as specified and as directed.

Supply and fixing of mild steel almirah shutters with frame, exceeding 1.5 Square metre, made of 1mm thick mild steel sheet, in two leaves, as built in furniture in cupboards, including locking arrangement with mortice lock of mild steel, vertical type, 65mm size, 2 lever, ISI marked with duplicate keys and handle, etc. (all as per Godrej pattern) including two coats of approved colour synthetic enamel spray painting over a coat of red oxide primer complete fixed in brick or concrete wall with minimum six numbers of 10mm dia and 100mm long mild steel bolt with washer and nut in cement mortar (1:4) or PCC 1:2:4, type B-0 complete all as specified and directed.

Supply and fixing of 18/19mm thick particle board, mediumdensity, flat pressed,single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed.

Supply and fixing of steel window box type, using ERW hollow 'P' section, factory made, comprising double frame for and including gauged and glazed skeleton shutter, 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 of HQ CE Chandigarh Zone as applicable complete all as specified and as directed. Note: (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawings and one shop coat of zinc chromate primer . The pattern of grill shall be all as shown on drawing (iii) Glazing, wire mesh and painting shall be measured and paid for separately. (iv) The drawings may be referred from GE office or from this office during working hours.

Supply and fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing of factory made solid panel PVC moulded door shutter with wood free EPS, 28 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, including suppling & fixing in the frame at site as per specification & drawing, with and including 3 Nos. stainless steel butt hinges of 100mm size for fixing the shutter complete all as specified and directed.

Supply and fixing of aluminium anodised, 150mm long, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing of mild steel sliding door bolts, 250mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Supply and fixing of mild steel, 300mm long, ordinary rat tail rod pattern springs for door including roller and roller plate, ISI marked complete all as specified and as directed.

Supply and fixing in replacement of extruded aluminium alloy handles, 125 mm long, fabricated type, anodised, ISI Marked complete, all as specified and as directed.

Supply and fixing in repair of harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

Material and labour in replacement for aluminium anodised, tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as specified and as directed.

Material and labour for floor door stopper of aiuminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of cover plate 150mm complete all as specified and as directed.

Supply and fixing in replacement, stainless steel sink with draining board, made out of 1mm thick sheet of grade SS 304, for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx330mmx160mm including waste pipe and waste fittings, brass, chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fixing in replacement of stainless steel plate rack made of 1mm thick sheet of grade SS 304, of size 750 x 600 x 200mm, weighing not less than 5.0 Kg each and fixed with stainless steel screws to wall complete all as specified and directed.

Supply and fixing in repair of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Supply and fixing in repair of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Refixing old serviceable steel water tubing of 15 mm bore, in new or old position, any grade, including S&F new fittings as required, fixed to walls and ceilings or laying in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Refixing old serviceable steel water tubing of 20 mm bore, in new or old position, any grade, including S&F new fittings as required, fixed to walls and ceilings or laying in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore including taking down of old tank of any descrption and removal from site complete all as specified and directed. Note:- Tank shall be white and make of tank shall be engraved on the tank.

Supply and fixing in replacement of 15mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipes or unions complete all as specified and directed.

Supply and fixing in replacement of 20mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipes or unions complete all as specified and directed.

Supply and fixing in replacement of bib taps, 15mm bore, long body, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule or union and fixed complete all as specified and as directed. Note : Weight of bib tap shall not be less than 0.575 Kg

Supply and fixing in replacement of stop valves, 15mm bore, fancy type, chromium plated, ISI marked, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Note : Weight of stop valve shall not be less than 0.575 Kg

Supply and fixing of vitreous china wash hand basin, white colour, flat back, of size 550x440mm, ISI marked, with 2 Nos.CI brackets embedded in cement mortar 1:4, 32 mm dia PVC waste pipe, 45cms long, fixed to walls, 32 mm dia brass chromium plated waste coupling, 15mm dia PVC connections including fixing including taking down of old WHB and removal from site, complete all as specified and directed.

Supply and fixing of vitreous china squatting pan of Orissa pattern, size 580mmx440mm, white (Ist quality) with and including PVC ‘P’ or ’S’ trap, with front or back inlet and integral foot rests of any pattern including connections to existing trap, flushing pipe, anti syphonage pipe etc and provision of lime concrete bedding for fixing including taking down of old WC and removal from site, complete all as specified and directed.

Supply and fixing in replacement of pillar taps, 15mm bore, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

Material and labour for running welding in repairs for thickness of metal to be welded not exceeding 6mm complete all as specified and as directed.

Supply and fixing in replacement of waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/ 40mm-60 gms) suitable for 32mm bore dia discharge pipe complete all as specified and as directed.

Supply and fixing in replacement of brass chromium plated shower rose 125mm size with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and as directed.

Supply and fixing in repair of PVC connections, 450 mm long and 15mm dia with PTMT nuts of length 300mm complete all as specified and directed.

Supply and fixing in repairs of PVC (SWR) floor trap, 75mm outlet dia, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fixing in repairs of PVC (SWR) pipes, 110mm bore, single socketed, in any length with rubber ring joints, laid in floors or trenches complete all as specified and directed.

Supply and fixing in replacement of 10 litre capacity, virgin polypropylene cistern, ISI marked, coloured, low level, valveless syohonic action type, 45cm PVC connection with PVC bend/flush pipe complete and making all connections including taking down existing high or low level unserviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil and removal of debries to distance exc 250mtr n exc 500 mtr complete all as specified and directed.

Material and labour for 75mm thick PCC (1:4:8), type D2 using 40mm graded stone aggregate as in sub base of floor or hardstanding finished even and fair complete all as specified and directed.

Material and labour, for vibratory compacted, precast cement concrete rubber moulded, coloured (except grey colour), interlocking paver blocks in milano shape, confirming to IS-15658-2006 of 60mm thickness, M-35 grade, as in path, hard standing, etc. laid over and including 25 mm thick rammed bedding layer of sand, complete all as specified and directed

Material and labour, for precast cement concrete solid blocks masonry, blocks made of PCC (1:3:6) type C1, using 20mm graded stone aggregates, Grade C confirming to IS-2185 (Part-I), 45cm high, 10 cm thick and of suitabe including weathering, slightly rounded or chamfered angles and throating, as in kerb continuous edging and setting in cement mortar (1:4) and struck flush as the work proceeds and finishing with neat cement flush joint complete all as specified and directed

Material and labour, for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations and polishing complete all as specified and directed.

SCHEDULE A PART II (E/M WORKS) Taking down carefully any type of point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets, tube light fittings with all accessories etc., and/or drawing out from existing conduit/batten and removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.

Material and labour for point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 Volts grade with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 25mm dia with accessories, concealed on wall/ ceiling and including 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 Volts grade stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with and including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal confirming to IS-5139 (Pt-I) of 1969 and IS: 14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including new 3mm thick plastic laminated sheet top cover extended up to 25mm over sunken box all around for housing the switches, socket outlet, fan regulator etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/ fan point controlled by one switch complete all as specified and directed. Notes :- (i) Switch, socket, lamp holder, ceiling rose and fan regulators to be measured and paid for separately. (ii) PVC Conduit shall conform to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only.(iv) The concealed conduits and MS boxes shall be verified by Engineer-in-Charge before making good the surfaces by plastering and other finishes.

Description all as per Srl item No.96.00 here in before but for one 3 pin socket outlet point 5 Amp on same board.

Description all as per Srl item No.96.00 here in before but for one 3 pin socket outlet point 5 Amp on Independent board.

Description all as per Srl item No.96.00 here in before but for one bell point controlled by one bell push

Description all as per serial item No.96.00 above, but for one socket point 3 pin 15 Amps (independent) power point, with 2.5 Sqmm PVC, FRLS-H, unsheathed, multistranded cable, 1100 volts grade, ISI marked, including 2.5 Sq mm size, green colour, PVC insulated FRLS-H, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed.

Supply and fixing of switch piano, 5 Amps, one way, flush type, single pole, 230 volts, AC supply, 50 Hz, ISI marked complete all as specified and directed.

Supply and fixing of switch piano, 15 Amps, one way, flush type, single pole, 230 volts, AC supply, 50 Hz, ISI marked complete all as specified and directed.

Supply and fixing of bell push, 5 Amps, one way, flush type, single pole, 230 volts, AC supply, 50 Hz, ISI marked complete all as specified and directed.

Supply and fixing of socket outlet, 3 pin, 6 amps, flush type, 230 volts, ISI marked complete all as specified and directed.

Supply and fixing of socket outlet, 2 in 1, 6 pin, 5/16 Amps, multi pin, flush type, 230 volts, ISI marked complete all as specified and directed.

Supply and fixing of door bell, ding dong/musical type, single phase, 230 volts, ISI marked complete all as specified and as directed.

Supply and fixing of ceiling rose surface bakelite 65x50mm, three terminals complete all as specified and as directed.

Supply and fixing in replacement of fan regulator electronic step type (socket type), 230 volts, 50 Hz, AC supply, suitable for ceiling fan, any type/make/sweep complete all as specified and as directed.

Supply and fixing of lamp holder, PVC/Polycarbonate type, with back plate suitable for batten fittings complete all as specified and as directed.

Dismantling safely existing light fitting of any description, capacity & make and refixing on same or other location after cleaning including necssary electrical connections using new flexible copper wire complete all as specified and directed.

Supply and fixing in replacement of retrofit LED Bulb of 9 watt suitable for batten holder B-22 complete all as specified and directed.

Supply and fixing in replacement channel for fixing of LED tube rod 4 ft length, made of aluminium housing body in CRCA sheet, suitable for 18/20 watt LED tube light, high efficient, AC, 220-240 Volts, 50 Hz, with built in electronic drivers connecting with copper conductor flexible cable from ceiling rose to connector of the light suitable for two end connect complete all as specified and directed. Note:- LED tube rod shall be measured and paid separetely.

Supply and fixing in replacement 18/20 watt LED tube rod 4 ft length,environment friendly, high efficient, T-8 with aluminium extrusion heat sink for optimum performance with high luminous efficiency suitable for fixing in LED light fitting complete all as specified and directed. Note:- Channel for fixing LED tube rod shall be measured and paid separetely.

Supply and fixing of decorative, surface mounted, LED mirror light, wall mounting light fitting, high efficient PMMA diffuser, aluminium housing in CRCA body suitable for and including 10 watt LED tube, high efficient, AC 220-240 volts,50 Hz, and compact and energy efficient, epoxy powder coated, CRCA sheet, connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light fitting including disconnecting and taking down of existing old unserviceable light fitting of any description and removal from site complete all as specified and directed.

Supplying and fixing in replacement, 10 watt LED bulk head light fitting with10 watt LED lamp and holder complying IP66 ingress protection and inpact resistance of IK09 long life, 50000 burning hours, including connecting up using three core, twisted flexible copper conductor cable of suitable size from ceiling rose to connector of light and disconnecting and taking down of existing light fitting and removal complete all as specified and directed .

Supply and fixing in replacement of LED security light luminaire 30 watt, 230 volts, 50 Hz, made up of die cast aluminum housing with black epoxy powder coating with cover heat resistant glass, safety input voltage range 170 to 270 Volts, IP66 protection, including service brackets of GI pipe 25mm bore, light grade, of length 1.60 metre, bent to required shape, fixed with MS clamps of size 40 x 6mm flat iron strip, 150mm long and 4 Nos.8mm dia stainless steel bolts and nuts and washers and suitable reducer for connecting to GI pipe as required at site and making all required electrical connections using 3 core copper flexible cable from terminal box to ceiling rose including disconnecting and taking down of old fitting with bracket as existing complete all as specified and as directed.

Supply and fixing of sheet metal enclosures vertical load line TPN distribution board, 4 ways, double door powder coated alongwith 200 Amp rated busbar with and including MCCB 4 pole 125 Amp adjustable type as incomer with suitable size of MS cabinet fabricated by 2mm thick MS sheet and making all type of connections using proper size of gland for incomer cable complete loadline TPN concealed on wall surface & making good the disturbed surfaces as per existing and dismantling and taking down the existing DB's of any type complete all as specified and as directed.

Supply, insatallation, commissioning and testing of distibution board for MCBs, SPN, 8 way, acrylic double door, IP 43, as per IS 8623, 240 volts, with and including 200 amps fully insulated copper bus bar fixed on wall duly grouted in solid block wall with and including copper lugs/thimbles duly crimped for connection including taking down and removal of old unserviceable DB with MCB of any capacity, size and type complete all as specified and directed. Note :- MCB shall be measured and paid separetely.

Supply and fixing of MCB, single pole, 240 volts, 50Hz, breaking capacity 10KA, 'C' curve, 6-32 Amps, ISI marked complete all as specified and as directed.

Supply and fixing of MCB, single pole and neutral , 240 volts, 50Hz, breaking capacity 10KA, 'C' curve, 40-63 Amps, ISI marked complete all as specified and as directed.

Supply and fixing of sheet metal enclosure, single pole with a two pin and earth plug and socketcomplete with one single pole MCB of 20 to 32 Amps, 'C' Curve, 240 volts complete all as specified and directed.

Material and labour for sub main wiring with two single core, 4 sqmm, FRLS-H, 1100 volts grade, ISI marked, with multistranded, PVC insulated unsheathed copper conductor cable, drawn in and including rigid non metallic PVC conduit, medium grade, not less than 25 mm dia, ISI marked for housing cables, concealed in wall or ceiling including necessary cutting, chasing with machine and making good disturbed surfaces as per existing, with accessories with and including one additional 4 sqmm, PVC insulated, stranded copper conductor, FRLS-H, green colour for earth continuity conductor connected to common earth dolly including taking down old unserviceable sub main wiring of any type and making good the disturbed surface complete all as specified and as directed. Note- Three runs of cable and one run of concealed conduct shall be measured as one unit.

Material and labour for sub main wiring with two single core, 6 sqmm, FRLS-H, 1100 volts grade, ISI marked, with multistranded, PVC insulated unsheathed copper conductor cable, drawn in and including rigid non metallic PVC conduit, medium grade, not less than 25 mm dia, ISI marked for housing cables, concealed in wall or ceiling including necessary cutting, chasing with machine and making good disturbed surfaces as per existing, with accessories with and including one additional 6 sqmm, PVC insulated, stranded copper conductor, FRLS-H, green colour for earth continuity conductor connected to common earth dolly including taking down old unserviceable sub main wiring of any type and making good the disturbed surface complete all as specified and as directed. Note- Three runs of cable and one run of concealed conduct shall be measured as one unit.

Disconnecting/dismantling old unserviceable earthing and material and labour for new earthing with galvanised earth plate electrode 600mm x 600mmx 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 4.00 mm GI wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire and thimbles protected by galvanized steel pipe 15mm dia (light grade) and connected to main switch or main control board all as shown in Electrical Plate No.3 of SSR Part-I & including necessary excavation and earth work in any type of strata, PCC (1:3:6) type C1 in pit, RCC cover slab 50mm thick in 1:2:4 type B-1 using 8mm dia TMT bars @10cm c/c both way with one 8mm dia bar as handle for lifting, 20mm dia GI medium grade watering pipe, funnel, wire wesh, charcoal or coke & salt in alternate layers, etc.all as indicated including testing on completion complete all as specified and directed. Note:- The new earthing shall be provided adjecent to old earthing site on the locations as directed by engineer in charge.

Note:- Amount of credit of Rs. 70,276.00 for retrieved materials is mentioned in Schedule of Credit Page Nos. 17R & 18R of tender documents in pdf form which will be deducted offline while acceptance of tender.

Ashwani Kumar

SM ENGINEERS

M/S JAISANT CONSTRUCTION CO.

Gupta Enterprises

PARVEEN KUMAR

Karishan Kumar goel

S M BUILDERS

Swami Enterprises