Tender for Annual rate contract for fabrication for all material as per mention in Schedule- B under Wankaner Division. (RFQ-43512) (2nd Attempts)

SUB: Tender for Annual rate contract for fabrication for all material as per mention in Schedule- B

under Wankaner Division. (RFQ-43512) (2nd Attempts)

SR. NAME OF FABRICATED ITEM UNIT Unit End GST @ Unit End

NO. Cost 18% Cost

Without in RS With GST

GST in RS in RS

1 11 KV V-CROSS ARM NO 46.42 8.36

2 HT TOP CLAMP (FOR PSC POLE) NO 14.59 2.63

3 HT TOP CLAMP (FOR GIRDER POLE) NO 14.59 2.63

4 D CLAMP (FOR PSC POLE) NO 7.17 1.29

5 TAPPING ANGLE NO 17.92 3.23

6 ANGLE BARA NO 6.63 1.19

7 GUARDING ANGLE NO 17.92 3.23

8 EARTHING COIL NO 11.95 2.15

9 C CLAMP NO 5.97 1.07

10 GUY ROD NO 19.12 3.44

11 TURN BUCKLE NO 15.53 2.80

13 GUY CLAMP PAIR 13.26 2.39

14 S.S.SET 11 PIECE FOR 10 KVA & 16 KVA T/C SET 238.96 43.01

15 S.S.SET 29 PIECE FROM MS CHANNEL & 418.18 75.27

ANGLE FOR 25,63,100 & 200 KVA T/C FOR SET

CITY( FOR PSC & GIRDER POLE)

16 S.S.SET 21 PIECE FROM MS ANGLE FOR 25,63 358.44 64.52

& 100 KVA T/C FOR RURAL( FOR PSC & GIRDER SET

17 5 KVA T/C S.S.SET( FOR PSC & GIRDER POLE) SET 412.21 74.20

18 3 HOLE PATTI NO 3.98 0.72

19 HT PROJECTION SET SET 218.83 39.39

20 LT PROJECTION SET SET 197.14 35.49

21 HT-LT COMBINE PROJECTION SET SET 251.98 45.36

22 LT CROSS ARM 2.5 FEET NO 23.90 4.30

23 LT CROSS ARM 3.5 FEET NO 23.90 4.30

24 LT CROSS ARM 4 FEET NO 23.90 4.30

25 LT CROSS ARM 4.5 FEET NO 23.90 4.30

26 STRAIGHT CROSS ARM NO 32.40 5.83

27 DP SET SET 54.00 9.72

28 FABRICATED DO FUSE NO 32.40 5.83

Above item wise rate including all type of transportation, loading & un loading, staking by bidder. Raw material

issued by PGVCL’s respective store & finished Goods with scrap will be credited by bidder at respective store.

Fabrication work shall be carried out as per PGVCL drawing. Rates of Fabrication, including providing Two coats

of ISI quality red-oxide by bidder. All general terms and conditions of tender will be applicable to bidder.

I am ready to accept the work and for that I read company’s rules and I follow them.

I read the entire item wise rate and I ready to work with that rate % (In words) below/above

companies above rates with GST satisfactory.

Signature of the Bidder

Seal/Stamp of the Bidder

Signature of Tenderer: - Company’s round seal