APPOINTMENT OF EMPANELMENT FOR CIVIL WORK AND FABRICATION WORK AS AND WHEN REQUIRED IN GANDHINAGAR MUNICIPAL CORPORATION AREA

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Excavation for foundation upto 1.5 mt.depth including sorting out and

1.00 stacking of unuseful materials and disposing off the excavated stuff upto 50 cu.m 1.00 121.91 1.22

Meter lead. (A) loose or soft soil [R&B SOR 2024-25, Item No.04001A page no. 67]

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out

2.00 and stacking of useful materials and disposing off the excavated stuff upto 50 Meter cu.m 1.00 134.95 1.35

lead.(A) Loose or soft soil [R&B SOR 2024-25, Item No.04002A page no. 67]

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out

3.00 and stacking of useful materials and disposing off the excavated stuff upto 50 Meter cu.m 1.00 148.17 1.48

lead.(A) Loose or soft soil [R&B SOR 2024-25, Item No.04003A page no. 68]

Filling available excavated earth (excluding rock) in trenches. plinth, sides

of foundations etc. in layers not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering. [R&B SOR 2024-25, Item No.4006 page no.

Filling in plinth with sand under floors including watering, ramming,

5.00 onsolidating and dressing etc. complete. [R&B SOR 2024-25, Item No.04007A page no. cu.m 1.00 476.93 4.77

Add extra for disposing off the excavated stuff of above itemes for lend of

(E) 400 mt or more [R&B SOR 2024-25, Item No.04005E page no. 61]

Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6- stone

aggregates 20 to 40 mmnominal size) and curing complete inclding cost of

formwork in (A) Foundation and Plinth [R&B SOR 2024-25, Item No.05003A page

Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size) and curing etc complete including cost of form

8.00 work but excluding cost of reinforcement for reinforced concrete workin (A) Cmt. 1.00 4006.93 40.07

Foundations, footings,Base or columns and mass concrete. [R&B SOR 2024-25, Item

No.05011AA page no. 74]

Providinig and laying controlled cement concrete M.200 and curing complete

including the cost of formwork but excluding cost of reinforcement for

9.00 reinforced concrete work in © Slabs,landing,shelves,Balconies Lintels, Cmt 1.00 4538.34 45.38

Beams, coluimn and Cantilever upto floor two level. [R&B SOR 2024-25, Item

No.05024CA page no. 77]

Providing and laying controlled cement concrete M.200 and curing complete

including the cost of formwork but excluding cost of reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of columns and

Mass concrete [R&B SOR 2024-25, Item No.05024AA page no. 65]

Providing and laying controlled cement concrete M.250 and curing complete

excluding the cost of formwork and reinforcement for reinforced concrete work in

© Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever upto

floor two level. [R&B SOR 2024-25, Item No.05025CA page no. 77]

Providing and fixing FRP of 28mm thick Fibre Glass shutter with 1.5 to 2.0 mm thick fire

retardent grade FRP skin in depressed panel design having extra reinforcement on sides &

edges & in Gel coat finish. The core of the shutter is to be filled up with injected retardent

grade polyurethane foam done in situ alongwith embedded wooden pieces for stiffening &

also taking hinges & fintures. The whole FRP frame & shutter is to be water proof

,weather proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive of

S.S hinges with necessary screws & alluminium S.S fixtures & fastenings & fastener

sleeve. [R&B SOR 2024-25, Item No.10039 page no. 105]

Supplying & Fixing Carrugated FRP Sheets 2mm thick for shed on readily

made available Structure. The Corrugated Sheets to be fixed with

13.00 appropriate lapping to ensure water proof shed, to be appropriately fatened to the Sqm 1.00 1174.00 11.74

structure made available with j Hooks, bolts and washers as directed by

engineerincharge etc. complete. Cost of Structure not included in this item.MR

Providing and fixing 25 cm Wide & 3mm thick exterior composite panel on

14.00 existing expansion joint horizontally & vertically with all material, hardware, Smt. 1.00 1043.90 10.44

acessories & fittings etc completed. [R&B SOR 2024-25, Item No.05053 page no. 83]

Providing nad fixing anodized alluminum any size and section

thikness for making Window / Door Shutter and frames including all fixturs and

15.00 fastening with all labour & including with all labour & including matirieal kg. 1.00 1515.00 15.15

required to Comlete the job

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Providing nad fixing powder coated as alluminum any size and section thikness for

making Window / Door Shutter and freams including all fixturs and fastening

with all labour & including matiriea required to Comlete the job

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x

1.95 mm @ Wt 1.094Kg / Rmt with colour anodized lluminium frame with 5 mm thick

17.00 transparent bronze colour tinted float glass with colour anodized alluminium frame for Smt. 1.00 1288.93 12.89

ventilation with 5 mm thick frosted glass as details etc complete for.window [R&B SOR

2024-25, Item No.11029 page no. 117]

ALUMINIUM DOOR :Providing and fixing in position alluminium door with

alluminium colour anodized hollow section frame of approved shade

fabricated from aluminium standard section for outer frame size

63.5mmx38.10mmx 1.7mm and door styles and top rial of alluminium section size

85mmx44.5mm x 1.62mm, Bottom rail size 114mm x 44.5mm x 1.49mm and lock

18.00 rail for door of size 95mm x 44.5mm x 1.60mm and providing gasket and glazing Smt. 1.00 4400.00 44.00

chips arround the glass. Providing handle, lock, braccket/ stopper 5mm thick

plain glass and 4mm thk. back light sheet as approved by Architect / Engineer

In-Charge. Memebers are fixed with transperent silicon material including all

required materials, All Fittings, labours and equipments as per detailed drawing

as directed for door at any floor, any level and any height.MR

Providing and fixing window having extruded aluminum Colour Powder Coated

section frame main outer size 95mm x 24mm x 1.17mm (of Section no:2459 @

wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x

1.30mm (of Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50mm (of Section no:8933,@ Wt. 1.06 Kg/mt) with sliding

19.00 shutters of horizontal member size 40 mmx18mm x1.29mm (of . Section Sq.m 1.00 1576.11 15.76

no:8947@ wt.of 0.456 Kg/mt), vertical member of size 4 0mm x 18mm x 1.29 mm

(of . Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc. [R&B SOR 2024-25,

Item No.11033 page no. 118]

Providing and fixing window having extruded aluminum Colour Powder Coated

section frame main outer size 63.50 x 38.10 x 1.95 mm(of. Section no:4605,@ Wt

1.094 Kg / Rmt), horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm

(of . Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size 61.85 mm x

31.75mm x 1.30 mm (of . Section no:8758 @ wt.of 0.0.659 Kg/mt) with sliding

20.00 shutters of horizontal member size 40mm x 18mm x 1.29mm (of . Section no:8949 @ Sq.m 1.00 1688.78 16.89

wt.of 0.456Kg/mt), vertical member of size40mm x 18mm x 1.29mm (of

. Section no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt) with 5 mm

thick transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as per

details etc complete for window. [R&B SOR 2024-25, Item No.11034 page no. 118]

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x

1.95 mm(of . Section no:4605, @ Wt 1.094Kg /Rmt with colour Powder Coated

alluminium frame with 5 mm thick transparent bronze colour tinted float glass

with colour anodizedalluminium frame for ventilation with 5 mm

thick frosted glass as details etc complete for.window [R&B SOR 2024-25, Item

No.11035 page no. 118]

providing and fixing sheet glass ordinary quality bedded in putty and fixed with

wooden beadings including the cost of wooden beadings of firstclass teak wood

and necessary cutting of glass. (4) 4mm thick [R&B SOR 2024-25, Item No.13003B

Providing and fixing sheet glass, selected quality (Type-C) bedded in putty

and fixed with wooden beading including the cost of wooden beadings of first class

teakwood and necessary cutting of glass. (1) 5 mm thick. [R&B SOR 2024-25, Item

No.13001A page no. 122]

Providing and fixing sheet glass, selected quality (Type-C) bedded in putty

and fixed with wooden beading including the cost of wooden beadings of first class

teakwood and necessary cutting of glass. (1) 6 mm thick. [R&B SOR 2024-25, Item

No.13001B page no. 122]

Deduct for difference in cost of meterials and labour involved in

method of glazing if changed in item No. 13 (A) Front and back puttied and

sprigged or fixed with glazing pins [R&B SOR 2024-25, Item No.13005 page no.

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Providing and laying marble stone slab flooring and dedo over 20mm

(average)base of cement mortar 1:6 (1- cement : 6 coarse sand) or L.M. 1:1.5(1- lime

26.00 putty : 1.5 - coarse sand) laid and jointed with gray cement slurry including Sq.m 1.00 2267.88 22.68

rubbing and polishing complete. (A) Marble slab 25mm thick [R&B SOR 2024-

25, Item No.14011A page no. 128]

Providing and laying polished Kota stone slab flooring and dedo over

20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement

slurry mixed with pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick [R&B SOR 2024-25, Item No.14012AA page

Providing and laying rough chiseled dressed stone flooring over 20mm

average thick base of cement mortar 1:5 (1-Cement : 5-coarse sand) or L.M. 1:1.5

28.00 (1-Lime putty : 1.5 - coarse sand) including pointing with cement mortar 1:2 (1- Sq.m 1.00 571.08 5.71

cement : 2-stone dust) etc. complete. (A) 25mm thick [R&B SOR 2024-25,

Item No.14014AA page no. 128]

Providing and laying cement concrete flooringb C.C 1:2:4 (1-cement : 2-coarse sand : 4-

graded stone aggregate 20mm nominal size) laid in one layer and finished with a

floating coat of neat cement. (B) 50mm thick. [R&B SOR 2024-25, Item No.14015BA

Providing and laying Granite slab (18 mm thick) one side polished flooring Dedo

over 20 mm (average) base of cement mortar 1:6 (1 cement : 6 coarse sand) or L.M

1:1.5 laid and jointed with grey cement slurry including rubbing and polishing

complete including dedo [tender id 9236 Item No.30]

Providing and laying dark shade vitrified tiles 8 mm to 10 mm thick in flooring

skirting , riser of steps and dedo on 10 to 20 mm thick cement plaster 1:3

(1cement : 3 Coarse Sand) & jointed with white cement slurry. [tender id

Providing and laying light shade vitrified tiles 8 mm to 10 mm thick in flooring

32.00 skirting , risers of steps and dedo on 10 to 20mm thick cement plaster 1:3 (1 Cement : Sq.m 1.00 945.70 9.46

3 Coarse Sand) & jointed with white cement Slurry. [tender id 9236 Item No.]

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of existing flooring and

jointed with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit( premium qoality ) [R&B SOR 2024-25,

Item No.14021A page no. 130]

Providing and laying broken chine mosaic flooring for terrace using 12 mm to

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto surface using white

cement including rounding off junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed. [R&B SOR 2024-

25, Item No.14035 page no. 130]

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x

mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm.

thick cement plaster 1:3 (1 cement : 3 coarse or any size suggested by Engineer in

charge [R&B SOR 2024-25, Item No.14036 page no. 130]

providing & fixing Glass bricks of size 19 x 19 x10 Cm for wall The Glass Brick

shall be laid in true line & level with alluminium 3mm rod to give uniform

36.00 thickness joints and shall be fixed in manufacturer specified adhesives and the Smt. 1.00 3950.00 39.50

intermediate joints shall be filled in desired colour & finished as directed by

Engineerincharge etc. complete MR

Labour Charges half round edge for Granite with requrid all machine and labour

to complete the job 966 [R&B SOR 2024-25, Item No.M724 page no. 38]

Labour Charges Quarter round edge for granite with requrid all machine and labour to

complete the job 967 [R&B SOR 2024-25, Item No.M725 page no. 38]

Labour Charges edge finished for Granite with requrid all machine and labour

to complete the job 968 [R&B SOR 2024-25, Item No.M726 page no. 38]

Labour Charges half round edge for Kota/Marble with requrid all machine and

labour to complete the job 969 [R&B SOR 2024-25, Item No.M727 page no. 38]

Labour charges quarter round edge for Kota/ Marble with requrid all machine and

labour to complete the job 970 [R&B SOR 2024-25, Item No.M728 page no. 38]

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Removing & Refixing Paver blocks paving as per requirement at desired

location. The Paver Blocks shall be removed and stacked at directed place and

42.00 shall be relaid again at the same location in proper line and level to match the Smt 1.00 249.00 2.49

existing paver blocks as directed by engineerincharge etc. complete. [Paver

Block Unit Rate Tender ID 9236, Item No. 42]

Applying general insecticide pest control treatment to floors, cupboards etc

including labour material etc. complete. Using Heptachloride 20 EC. As Per

6113_pes ts Consentration Weight 0.50 percent is recommended one litre chemical

43.00 emulsion dillute with 39 liter of water will give. Total dillute concrentration will be Sq.m 1.00 90.72 0.91

40 litre inclusive of one litre chemical emulsion appication 0.5 Litre

chemical / Sqm of surface is recommended as per I.S [R&B SOR 2024-25, Item

No.22006 page no. 158]

Providing corrugated G.I. sheet of class- 3 roofing fixed with glavanished iron J or L

Hooks, Bolts and nuts 8mm diameter with bitumen and G.I.limpet washer or G.I.

limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thicksheet. [R&B SOR 2024-25, Item No.15001A page no. 127]

Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet

fixed with hilti screw and rubber silicon sealer and alluminium strip of size 50 x 3 mm

etc complete as directed by Engineer in arge. [R&B SOR 2024-25, Item No.15019

Providing and fixing single layer waterproof gypusm board 12.5 mm thick

with of the make Newgood Group Co. Ltd. or equivalent & Newgood Group Co.

Ltd. company sections using waterproof board of size 1220 mm x 1830 mm x

mm suspended by G.I suapender of size 25 mm x 3 mm with intermediate channel

of size 18 mm x 40 mm x 0.80 mm at 1220 mm center to center ceiling section of size

46.00 40 mm x 35 mm x 0.55 mm at 457 mm center to center and perimetre chanel A of Sq.m 1.00 600.94 6.01

size 20 mm x 27 mm x 30 mm x 0.50 mm at edges & drops including paper tap sand

sofit cleat, anchor fastener, scoch bolt connecting cleat joining compound top coat

on ceiling including making necessary opening for light fitting, diffuser

etc. complete as per detail drawing as directed. [R&B SOR 2024-25, Item No.16007

Providing throating or plaster drip and

moulding to R.C.C chhajja. [R&B SOR 2024-25, Item No.5018 page no. 75]

Providing 10 mm thick cement plaster on ceiling and soffits of stairs upto floor two

48.00 level, in cement mortar (1:4) (1 cement : 4 sand) including neat cement slurry for Smt 1.00 133.96 1.34

all floors. [R&B SOR 2024-25, Item No.17001A page no. 136]

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or

half brick walls for interior plastering upto floor two level and finished even and smooth in

(ii) Cement mortar 1:4 (1-cement :4-sand) [R&B SOR 2024-25, Item No.17002B page

20mm thick sand faced cement plaster on walls upto height 10 metres above ground

level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3- sand) and

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. [R&B

SOR 2024-25, Item No.17009 page no. 137]

Providing 20 mm thick double coat mala cement plaster on interior brick /

concrete work for plastering comprising of base coat of 12 mm thick cement plaster in

51.00 cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat Sq.m 1.00 283.27 2.83

of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing etc. complete. [R&B SOR 2024-25, Item No.17017 page no. 138]

Providing & applying External Acrylic Paint of desired shed from Asian paint&

Nerolik& barger or equivalent in minimum three coats (first coat with

external primer & balance two coat with apex or equivalent paint as per

supplier''s specification) with brush on exterior sand faced plastered surfaces / mala

plastered surfaces with a minimum one coat of external cement based putty of

Birla or equivalent at all heights / all floors / all heights & all places including

52.00 scaffolding to give even shades including thoroughly brushing the surfaces free from Smt. 1.00 246.00 2.46

mortar dropping and other foreign matter and sand papered smooth etc complete

as per the manufacture's specification & to the satisfaction of Engineer incharge

Newly plastered surfaces requires minimum three oats first coat with exterior

primer with 1 :1 ratio or as per supplier’s specifications & balance coats with with

40% dilution). The rate shall also include the cost of filler for cracks on the surfaces.

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

White washing with lime on wall & cailing surface (two coats) to give an even

53.00 shade including thoroughly booming the surface to remove all dirt, dust; mortar drops Sq.m 1.00 12.90 0.13

and other foreign matter. [R&B SOR 2024-25, Item No.18001 page no. 140]

Distempeing (Two coats) with oil bound distemper of approved brand and

manufacture and of required shade on wall & cailing surfaces to give an even

shade, over and including a priming coat with distemper primer of approved brand

and manufacture after thoroughly brushing the surface free from mortar

dropping and other foreign matter and also including preparing the surface even and

sand papered smooth. [R&B SOR 2024-25, Item No.18022 page no. 141]

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall & cailing surface to give an even shade

55.00 including throughly brushing the surface free from mortar droppings and other foreign Sq.m 1.00 82.36 0.82

matter and sand papered smooth. [R&B SOR 2024-25, Item No.18031 page no.

Extra over above item for every subsequent coat of wal l& cailing

56.00 painting with plastic emulsion pain of approved brand. [R&B SOR 2024-25, Item Sq.m 1.00 35.06 0.35

No.18032 page no. 142]

Applying priming coat over new steel and other metal surfaces after and

including preparing the surface by throughly cleaning oil, grease dirt and other

57.00 foreign matter & scoured with brushes fine steel, wood, scrapers and sand papers Smt 1.00 36.06 0.36

with ready mixed priming paint brushing red lead. [R&B SOR 2024-25, Item

No.19001 page no. 143]

Painting one coats (excluding priming coat) on previously painted steel and other

metal surface with enamel paint, brushing to give an even shade including

cleaning the surface of all dirt, dust and other foreign matter. [R&B SOR 2024-25,

Item No.19003 page no. 143]

Painting two coats (excluding priming coat) over new steel and other metal surfaces

with enamel paint, brushing, interior to give an even shade including cleaning the surface

of all dirt, dust and other foreign matter. [R&B SOR 2024-25, Item No.19005 page no.

Appliying priming coat over new wood and wood based surface after and

including preparing the surface by throughly cleaning oil, grease, dirt and other

foreign matter, sand papering and knotting. (C) Ready mixed paint brushing

priming for enamel [R&B SOR 2024-25, Item No.19009C page no. 144]

Painting one coats (excluding priming coat) on previously painted wood and wood

61.00 based surface with enamel paint, to give an even shade ncluding cleaning the of all dirt, Sq.m 1.00 57.89 0.58

dust and other foreign matter. [R&B SOR 2024-25, Item No.19012 page no. 144]

Polishing with french polish on new wood and wood based surface to give an

even surface including cleaning, the surface of all dirt, dust and sand

papering smooth and including a coat of wood filler. [R&B SOR 2024-25, Item No.19017

Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the surface

to remove all dirt, and remains of loose powdered materials.etc

complete [R&B SOR 2024-25, Item No.19031 page no. 146]

Applying two coats of Birla or Asian acrylic lapy (putty) & two coats of

primer of approved brand and manufacture on new wall surface to give

64.00 an even shade including thoroughly brushing the surface free from mortar dropping Sq.m 1.00 40.19 0.40

and other foreign matter and sand papered oth. [R&B SOR 2024-25, Item No.19032

Demolition including stacking of serviceable materilas and disposal of

65.00 unserviceable materials with all lead and lift. (i) R.C.C. work [R&B SOR 2024-25, Cmt. 1.00 1099.75 11.00

Item No.20002 page no. 147]

Dismentling steel work including distempering and stacking the materials with

all lead and lift. [R&B SOR 2024-25, Item No.20012 page no. 148]

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and

67.00 clamps including stacking the materials with all lead and lift (for any dia, of pipe) Rmt. 1.00 77.73 0.78

[R&B SOR 2024-25, Item No.20015 page no. 148]

Demolition of Brick work and stone masonry including stacking of

68.00 serviceable materilas and disposal of unserviceable materials with all lead and cu.m 1.00 380.36 3.80

lift. (i) In Lime Mortar.[R&B SOR 2024-25, Item No.20003A page no. 147]

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas

69.00 and disposal of unserviceable materials with all lead and lift. [R&B SOR 2024-25, Sq.m 1.00 49.61 0.50

Item No.20005 page no. 147]

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves, holdfasts and other attachment etc.complete and stacking

them within all lead and lift.(i) Not exceeding 3 Sq.M. in area. [R&B SOR 2024-25,

Item No. 20013A page no. 148]

Dismantling sanitary fittings like wash basin, W.C pan Indian and European type,

71.00 flushing tank etc including stacking the materials with all lead and lift. [R&B SOR Nos 1.00 421.71 4.22

2024-25, Item No.20016 page no. 148]

Removing and scraping of old deteriorated plaster of any thickness

fromm wall / R.C.C member including stacking of serviceable material and

disposal of unserviceable from site of work with all lead and lift [R&B SOR 2024-

25, Item No.20045 page no. 149]

Removing dry or oil bound distemper by a washing and scraping and sand papering the

73.00 wall surface smooth including necessary repairs to scratches complete. [R&B SOR 2024- Smt 1.00 11.75 0.12

25, Item No 18014 page no. 141]

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle

posts 40mm x 40 mm x6 mm and oil painting 3 coats fixed at 2.5 Mt,C/c. with

five Horizontan lines and two diagonals of galvanised steel barbed wire

weighting 9.38 Kg. per 100 Metre, strained and fixed to posts with G.I,staples

including fixing the postsin ground with 0.5 M x 0.5.M x 0.5 M. block in

C.C1:5:10 etc complete. [R&B SOR 2024-25, Item No.22001 page no. 157]

Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of

75.00 required capacity each with all necessary fittings and connection etc. Lit. 1.00 3.91 0.04

complete on terrace. [R&B SOR 2024-25, Item No.22014 page no. 158]

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials. [R&B SOR 2024-25, Item

No.23061 page no. 168]

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials. [R&B SOR 2024-25, Item

No.23062 page no. 168]

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials. [R&B SOR 2024-25, Item

No.23065 page no. 168]

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials. [R&B SOR 2024-25, Item

No.23064 page no. 165]

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other nd socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

80.00 shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm Rmt. 1.00 826.12 8.26

length x 196 mm heigh at every 2000 mm center to center or shall be concealed

in walls as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials. [R&B SOR 2024-25, Item No.23066 page no. 169]

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber

81.00 lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre Rmt. 1.00 868.22 8.68

x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings such as bends, shoes

etc. including testing of pipes and joints and jointed with adhesive [R&B SOR 2024-

25, Item No.23067 page no. 169]

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Providing & fixing S.W. gully trap with C.I. grating brick masonary chamber &

water tight C.I. cover with frame of 300 mm x 300 mm size (inside) with

standard weight having square mouth trap having size of 150 mm x 100 mm for P

or R Types [R&B SOR 2024-25, Item No.24006B page no. 171]

Providing and fixing to wall ceiling and floor SWR soil waste pipe 160 mm dia

confirming ISI Standards.Rate inclusive of all fittings like single or double "Y" with

or without door, reducer, coupler single T with or without door bend , pipe clip on

wooden patti etc. complete and making good the wall ceiling and floor.MR

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-

graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6- Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement

Mortar 1:5 (1- Cement : 5-coarse sand) finished with a floating coat of neat cement

and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-

stone aggregate 20mm nominal size) finished smooth complete including curing

and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with

frame size 560mm diameter total weight of cover and frame to be not less than

kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls

of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm.

in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (2) B type depth 1.50 Metre for

150mm diameter sewer. [R&B SOR 2024-25, Item No.24008B page no. 171]

(I) Extra rate for constructing B.B. masonry for every additional depth of

85.00 0.1M. or Part thereof over item No.24.27 (I) for depth from 0.9M to 1.5M. Each 1.00 517.78 5.18

177 . [R&B SOR 2024-25, Item No.24009A page no. 173]

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-

graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6- Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement

Mortar 1:5 (1- Cement : 5-coarse sand) finished with a floating coat of neat cement

and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-

stone aggregate 20mm nominal size) finished smooth complete including curing

and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with

frame size 560mm diameter total weight of cover and frame to be not less than

kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls

of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm.

in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A type depth 0.90 Metre for

150mm diameter sewer. [R&B SOR 2024-25, Item No.24008A page no. 171]

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm

87.00 including 500mm x 450mm C.I. horizontal grating wih frame Each 1.00 1997.22 19.97

complete. [R&B SOR 2024-25, Item No.24013A page no. 174]

Extra over Above items 24.44 for every additional depth of 0.1M. of part

88.00 thereof beyond 450mm depth for Brick masonry chamber.(i) for 455mm x 610mm Each 1.00 239.99 2.40

size. [R&B SOR 2024-25, Item No.24017A page no. 175]

Rigid PVC drain pipe of 10 Kg/cm2. rating with nitrile rubber insulation of 6 mm

thick b) 19 mm Dia.EI 85 [Unit Rate Tender ID 9236, Item No.89]

Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt.

of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1- cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm

and 450mm deep for single pipe line [R&B SOR 2024-25, Item No.24016AA page

Providing and fixing Urinal of approved quality including connection with trap and

91.00 with integral longitudinal flush pipe.(A) Squating plate pattern white earthenware Each 1.00 1612.41 16.12

550mm x 300mm. [R&B SOR 2024-25, Item No.23034 page no. 166]

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S.

brackets painted white including sutting holes and making good the same but

92.00 excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. Each 1.00 1470.19 14.70

(i) In white colour including waste pipe. [R&B SOR 2024-25, Item No.23018 page no.

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Providing & Fixing vitreous china counter top was basin including heavy

duty stop cock suitable for functioning under pressure pump system but

excluding the cost of pillar cock ec. Complete as per the directions of

Engineerincharge MR

Providing & Fixing flexible PVC connection Pipes upto 75 cm length for

supply of water from angular stop cock upto wash basin pillar cock including necessary

connection pipes, washers etc complete as irected by

Engineerincharge.MR

Providing & Fixing Waste Pipe of upto 90 cm length for drainig water from 40 mm

dia C. P. Waste couplin fixed to wash basin upto NT in the Floor.MR

Providing and fixing C.P. brass waste coupling for washbasin or sink. (B)

40mm dia. [R&B SOR 2024-25, Item No.23020B page no. 164]

Providing and fixing C.P brass waste coupling for wash basin or sink (A)

mm meter. [R&B SOR 2024-25, Item No.23020A page no. 164]

Providing and fixing screw down bib taps heavy duty of following size.(B)

98.00 Brass chromium plated screws down Bib Tap. ESSCO, GMT or jaqur equivalent brand Each 1.00 1400.00 14.00

as aprovd by engeer incharg (i) 15mm dia.MR

Providing and fixing pillar tap, capstan head, screw down high pressure with screws,

99.00 shanks and back nuts. (i) 15mm dia. [R&B SOR 2024-25, Item No.23029A,23.95(A) Each 1.00 305.67 3.06

Providing and fixing brass screw down

stop tap.(A) 15mm dia[R&B SOR 2024-25, Item No.23030A,23.96(A) page no. 165]

Providing & Fixing Heavy duty C. P.Angle Stop cock ESSCO, GMT or jaqur

101.00 appropriate to be functioning in a water supply system employing Pressurepump ncluding No. 1.00 1035.00 10.35

installation as directed by Engineerincharge etc. complete.MR

Providing and fixing chromium plated brass half trun flush cock of approved quality

102.00 including fixing in pipe line etc. complete.(ii) 25mm dia. [R&B SOR 2024-25, Item Each 1.00 261.16 2.61

No.23032B, page no. 166]

Providing & Fixing brass CP Concealed cock 15 mm Ø Heavy duty with cap

103.00 including installation as directed and approved by Engineer in charge etc. No. 1.00 2091.00 20.91

Providing and fixing Gun metal check or nonreturn fullway wheel valve.(E) 40mm

dia.[R&B SOR 2024-25, Item No.23031E,23.99(E) page no. 166]

Providing and fixing Gun metal check or nonreturn fullway wheel valve.(c) 25 mm

dia[R&B SOR 2024-25, Item No.23031(C),23.99© page no. 166]

Providing & Laying underground Pipes of upto 150mm dia of 10 kg below

roads by pipe pushing method without open trench excavation to avoid

disturbance to the moving traffic including the cost of pipe pushing

mechanism etc. complete as directed by engineerincharge.MR

Providing & fixing brass handle valveheavy duty with brass ball housed in

metal casting body and MS outer handle covered with PVC sleeve of

following nominal diameter, including cost of consumables like taflon tape

etc.complete as approved by Engineer in charge (A) 15mm Handle Valve. MR

108.00 (B) 25mm Handle Valve.MR Nos. 1.00 1450.00 14.50

109.00 (C) 40mm Handle Valve.MR Nos. 1.00 2435.00 24.35

110.00 .(D) 50mm Handle Valve.MR Nos. 1.00 2625.00 26.25

Providing & Fixing 40 Schedule 50 mm UPVC Ball Valve of Astral or equivalent

111.00 make as directed by Engineerincharge Nos. 1.00 915.00 9.15

etc. complete.MR

Providing & Fixing 40 Schedule 25 mm UPVC Ball Valve of Astral or quivalent

112.00 make as directed by Engineerincharge No. 1.00 795.00 7.95

etc. complete.MR

Providing & Fixing PVC cowl 110 mm No.

Providing and fixing Ball cock including PVC Ball and Ball cock and Ball

connecting metal stem with threading at both ends, includimg fitting the entire

114.00 assembly in water tanks as directed by engineerincharge etc. complete. Nos. 1.00 710.00 7.10

having following nominal diameters. (A) BALL COCK 15MM

115.00 (B) Ball cock 25 mm Diameter - MR Nos. 1.00 765.00 7.65

116.00 (C) Ball Cock 40 mm Diameter - MR Nos. 1.00 929.00 9.29

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Providing and fixing C.P brass shower rose with 15 mm or 20 mm inlet. (A)

mm diameter. [R&B SOR 2024-25, Item No.23023.23.141, page no. 165]

Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self

cleaning design with C.I. screaed down or higned grating including cost of cutting

andmaking good the walls and floor 100mm inlet and 50mm outlet.(C) 100mm dia.l[R&B

SOR 2024-25, Item No.23008,23.87 page no. 163]

Providing and fixing 100mm sand cast

119.00 iron grating for gully, floor or Nahni trap.l[R&B SOR 2024-25, Item Each 1.00 36.61 0.37

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size

580mm (Earthwork, bed concrete, foot reste and trap to be easured and paid for

separately) (A) Vitreous China.(I) Long pattern = White colourl[R&B SOR 2024-

25, Item No.23009,23.111 page no. 163]

Providing and fixing wsh down water closet (European type, W.C. Pan) with

integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-

121.00 Cement : 1-fine sand) (Seal and cover to be measured and paid for Each 1.00 1343.38 13.43

separately)(A) vitreous China Pattern :(i) in white colour l[R&B SOR 2024-25, Item

Providing and fixing 100mm size P or S trap for water closet squatting pan

including jointing the trap with the pan and soil pipe in cement Mortar 1:1 (1- Cement

: 1-Fine sand)(A) Vitreous China.[R&B SOR 2024-25, Item No.23011, page no.

Providing and fixing plastic seat and cover for wash down water closer with

123.00 C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover. .[R&B SOR Each 1.00 288.45 2.88

2024-25, Item No.23017, page no. 164]

Providing and fixing C.I. Manhole cover

124.00 0.60 M. x 0.45M. size having weight not less than 35Kg..[R&B SOR 2024-25, Item Each 1.00 948.68 9.49

No.23038, page no. 167]

providing and laying and joining with stiff, mixture of cement mortar in

proportion 1:1, salt glazed stoneware pipes following nominal internal

diameters including testing of pipes and joints complete. [A] 100 mm.

diameter.175 .[R&B SOR 2024-25, Item No.24001AA, page no. 170]

Providing and laying (to level or slopes) and jointing with stiff mixture of Cement Mortar

126.00 in proportion 1:1 Salt glazed stoneware pipes including testing of pipes and joints Rmt. 1.00 302.64 3.03

complete.(B) 150mm dia.[R&B SOR 2024-25, Item No.24001BA, page no. 170]

Providing & fixing M.S. grills of required pattern of windows etc. with M.S. flats or ms

hollow section as per design or at required spacing & frame around, square or

round bars with round headed bolts & nuts or by screws(A)Plain

grill. [R&B SOR 2024-25, Item No.10025AA, page no. 102]

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

128.00 binding and placing in position complete upto floor two level [R&B SOR 2024-25, Kgs. 1.00 76.52 0.77

Item No.05014C, page no. 75]

Steel work, welded in built up sections framed work including cutting, hoisting, fixing

in position and applying a priming coat of read lead paint. (A)In beams and joists,

129.00 channels angles Tees, flats, with connecting plates or angle cleats as in main and Quintal 1.00 8750.00 87.50

cross beams. Hip and jack rafters, purlins conneted to common rafters and

the like [R&B SOR 2024-25, Item No.11002AA, page no. 115]

Providing and fixing in position collapsible steel shutter with vertical

channels 20 mm x 10mm x 2mm braced with flat iron diagonals 20mm x 5mm size

with top & bottom rails of T iron 40mm x 40mm x 6mm with 38mm

diamemter steel pulleys complete with bolts, nuts, locking arrangements, stopper

handles including applying a priming coat of red lead paint. [R&B SOR 2024-25,

Item No.11003A, page no. 115]

Brick work using common burnt clay building bricks having crushing strength not

less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand)(B) conventional [R&B SOR 2024-25, Item No.06001BA,

Extra for brick work in superstructure above plinth level upto floor two level

(B) Conventional [R&B SOR 2024-25, Item No.06006B, page no. 87]

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Half brick masonry in common burnt claybuilding bricks having

crushingstrength not less than 35kg/cm2 in cement mortar 1:4 (1 cement

: 4 coarse sand) (B) Conventional[R&B SOR 2024-25, Item No.06008A2A, page no.

Carring out plinth treatment to post construction / existing structure by spraying chemical

solution for termite control treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II

134.00 Consentration Weight one percent is Smt. 1.00 110.15 1.10

recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration

inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S[R&B SOR 2024-25, Item No.22007, page no. 158]

Applying general insecticide pest control treatment to floors, cupboards etc including

labour materials etc. complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -II(

135.00 (0.075% concentration by mass) is recommended 10.5ml chemical diluted with 5 liters of Smt. 1.00 90.72 0.91

water application 0.5 litre chemical /Sqm of surface is recommended as per I.S. [R&B

SOR 2024-25, Item No.22006, page no. 158]

Providing cement vata (10cmx10cmsize) quarter round in cement mortar 1:1

136.00 including neat cement finishing watering etc complete [R&B SOR 2024-25, Rmt. 1.00 24.04 0.24

Item No.17015, page no. 138]

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes

(Medium grade) of the following nominal bore, tube fitting and clamps

including making good the wall ceiling and floor.(A) 15mm [R&B SOR 2024-25,

Item No.23001AA, page no. 161]

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes

(Medium grade) of the following nominal bore, tube fitting and clamps

including making good the wall ceiling and floor.(C) 25mm [R&B SOR 2024-25,

Item No.23001CA, page no. 161]

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes

(Medium grade) of the following nominal bore, tube fitting and clamps

including making good the wall ceiling and floor.(E) 40mm [R&B SOR 2024-25, Item

No.23001EA, page no. 161]

Providing and laying in trenches galvanised mild steel tubes (Midium

grade) of the following nominal bore, and tube fitting (Earthwork in trenches to

be measured and paid for separately)(H) 80mm [R&B SOR 2024-25, Item

No.23002HA, page no. 162]

Making connection of galvanised Mild steel distribution branch with

galvanised mild steel main 50mm to 80mm nominal bore by providing and fixing

tee including cutting and threading the pipes complete [R&B SOR 2024-25,

Item No.23003, page no. 162]

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene

pipes of the following outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making good the wall ceiling and

floor.(F)75mm2 [R&B SOR 2024-25, Item No.23004f, page no. 162]

Providing and fixing to wall ceiling and floor 10.00 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with

143.00 special flange compression type fittings, wall clipsetc. including making good the Rmt. 1.00 335.69 3.36

wall ceiling and floor.(B) 110 mm [R&B SOR 2024-25, Item No.23004G, page no.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene

pipes of the following outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making good the wall

ceiling and floor.(C) 32mm [R&B SOR 2024-25, Item No.23004C, page no. 162]

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with

special flange compression type fittings, wall clipsetc. including making good the

wall nceiling and floor.(E) 50mm[R&B SOR 2024-25, Item No.23004E, page no. 162]

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-

pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends

prepared for collar joints including testing of joints complete.(C) 250mm [R&B SOR

2024-25, Item No.24007CA, page no. 171]

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-

pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends

prepared for collar joints including testing of joints complete.(D) 300mm [R&B SOR

2024-25, Item No.24007BA, page no. 171]

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Providing and Installing precast Wall of 9''6" Height above Ground Level,for

rooms, with Precast Columns of secgtion 6"x6" with 7nos. 3mm high

carbon steel wires installed not more than 7''0" apart with Grooves on required

two faces to receive precast intermediate straps of 7''x1''x2" each reinforced with

nos. 3mm high carbon steel wires to be stacked one above the other in each interval

between the columns with provisions for openings of doors, windows including all

necessary cement work and foundation upto 3''0'''' depth to make the

assembly stable as directed by Engineerincharge etc. complete.MR

Providing & Fixing Pre coloured Galvalium Profile Sheets having 200 mm Pitch

& 30 mm Depth having 0.50 mm Thickness with 120 gsm coating

composing 1618 microns top coating over 89 microns back coatingwith a

149.00 primer of 57 microns having 550 MPA strength with iron J or L hooks, bolts & nuts Smt 1.00 1650.00 16.50

8 mm. diameter with bitumen & G.I.limpet washers installed with necessary

precautions to make the roofing sheets assemply water proof etcc. complete

excluding the cost of purlins, rafters and trusses. MR

Provoding and fixing flush door shutters, solid core construction with frame

of first class hardwood with cross board and face veneer or plywood face panels,

150.00 including anodised alluminium butt hinges with necessary screws. (B) Non-decorative Smt. 1.00 1811.62 18.12

type and block board core anodised alluminium butt hinges in flush door shutters

(2) 35 mm thick. [R&B SOR 2024-25, Item No.10011, page no. 101]

Provoding and fixing laminated Sheet 1 mm thick on Flush door with adhesive and

151.00 all labour requined to complet the job [R&B SOR 2024-25, Item No.M788, page Smt. 1.00 296.61 2.97

Providing and fixing S.S. Stopper 20 Cm long of ASIS 304 as approved by

152.00 engneer in charg with all labour and material requred to complet the job [R&B No. 1.00 126.27 1.26

SOR 2024-25, Item No.M707, page no. 37]

Providing and fixing S.S. Aldrop 25 Cm long of ASIS 304 Grade as approved by

153.00 engneer in charg with all labour and material requred to complet the job [R&B SOR No. 1.00 324.58 3.25

2024-25, Item No.M709 , page no. 37]

Providing and fixing S.S. Handle for Door

15 Cm size of ASIS 304 Grade as approved by engneer in charg with all

labour and material requred to complet the job 954 [R&B SOR 2024-25, Item No.M

Providing and fixing S.S. Door / window hinges 4x1"x1" as approved by engneer in charg

155.00 with all labour and material requred to complet the job [R&B SOR 2024-25, Item No. 1.00 54.24 0.54

No.M735, page no.39]

Providing and fixing S.S. Door / Window hinges 4x3/4"x3/4" as approved by

engneer in charg [R&B SOR 2024-25, Item No.M736, page no. 39]

Providing and fixing S.S. Door / Window hinges 3x3/4"x3/4" as approved by

157.00 engneer in charg with all labour and material requred to complet the job [R&B SOR No. 1.00 17.80 0.18

2024-25, Item No.M737 , page no.39]

Providing & Fixing Mineral Fibre False Ceiling at one single level with

Perforated Mineral Fibre Panels laid in a hanging network of pree coated Tee & L section

suspended from ceiling with appropriate mechanism at stipulated height as per

the reqirement and direction of Engineer in charge etc. complete.MR

Repairing Existing false ceiling work by replaceing damaged portion and

making good all damages including providing and fixing additional material

159.00 wherever required to reinstate the False ceiling to its original service providing level Smt. 1.00 750.00 7.50

as per the directions of engineerincharge ertc. .with all labour and material

required to complete the job MR

Providing and fixing FALSE CEILING of Aerolight light weight calcuim silicate

tiles tegular Edge of Size 595 X 595 X 15mm Densified edge , Having 100%

humidity resistance and Incombustibale as per BS 476 part -4 with thermal

onductivitiy of 0.043 W/mo Kc , With NRC of 50and approved surface design tobe

placed in the grid suspended ceiling with border of gypsum sheet . grid system

amde of galvanised steel section with main "T'' runner 3.6 mt long with size

160.00 38X24X0.30 mm paced betwen main ''T" at 1200mm C/C and cross "T" of 1.2 Smt. 1.00 1156.90 11.57

mt long with size 24X24X.30 mm spaced between main "T" at 600mm C/C To from

a grod of 600 X 1200 mm and secondary cross "T" Of lenght 600 mm to be inter

locked at middle of the 600 X 1200 mm penal to from a grid of 600 X 600mm

The wall angle of size 24 X 24 X 0.55 mm to be fixed all around the perimetr of the

wall the main "T" runner to be suspended from the ceiling using GI Sloted cleats

and 50mm long dash fasteners, 4mm GI MR

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

providing & applying waterproofing treatment to terrace with brush

application of water proofing chem calNew Coat of of Dr. Fixit company or

equivalent applied over Prime seal primer on the surface to be treated after

161.00 filling cracks with crackack paste sealent chemical after opening the existing Smt. 1.00 1080.00 10.80

cracks of the crack is wider than

2.5 mm etc. complete s per the manufacturers application instruction etc.

Providing Wall Puning By Applying Plastar Of Perish /Gypsum powder On wall

162.00 To Make Wall True line and level Smt. 1.00 325.00 3.25

Up to 25mm Avg thickness.MR

Providing and fixing s.s railing hight 0.90 mtr. height using with top pipe 50mm Dia X

16G pipe. & 20mm dia 16G X 5 Nos. Horizontal pipe & 40 mm dia X 16 G Veratical

pipe 1.20m C/C And fixed at bottom in grenit or fixing by making hole or drilling

long screw incluing all requried and labour & material with all fixtuters and fastenings

required to complete job as per approved by Engineer in charge etc.

Providing and fixing S.S railing Pipe 50mm X16 G ASIS 304 Grade as per

approved pattern including cutting, bending, welding, fixing and rubbing &

164.00 finishing etc. incluing all requried and labour & material with all fixtuters and Rmt. 1.00 1004.24 10.04

fastenings required to complete job as per approved by Engineer in charge etc.

complete[R&B SOR 2024-25, Item No.M714 , page no.38]

Providing and fixing S.S Sq. Pipe 32X32mm X16 G ASIS 304 Grade as per

approved pattern including cutting, bending, welding, fixing and rubbing &

165.00 finishing etc. incluing all requried and labour & material with all fixtuters and Rmt. 1.00 454.24 4.54

fastenings required to complete job as per approved by Engineer in charge etc.

complete.[R&B SOR 2024-25, Item No.M715 , page no.38]

Providing and fixing S.S railing Pipe 16mm X16 G ASIS 304 Grade as per

approved pattern including cutting, bending, welding, fixing and rubbing &

166.00 finishing etc. incluing all requried and labour & material with all fixtuters and Rmt. 1.00 366.10 3.66

fastenings required to complete job as per approved by Engineer in charge etc.

complete.[R&B SOR 2024-25, Item No.M716 , page no.38]

Providing and fixing S.S Sq. Pipe 40mm X16 G ASIS 304 Grade as per approved

pattern including cutting, bending, welding, fixing and rubbing & finishing etc.

incluing all requried and labour & material with all fixtuters and fastenings required

to complete job as per approved by Engineer in charge etc. complete... - MR

Providing & Modular partition full or low with 1.2m or more with whole frame

structure of aluminium exteruded alloy section with all sections powder coted

168.00 (50 micron) having overall partition thickness 80 mm (double skon ) flush on Smt. 1.00 6470.00 64.70

both sides, with no screwing or gluning etc . visible .as specifed in specificition sheet

Providing & Modular partion full height as above but with twin layers of glass glued

with alumium glass section by 30m type horizontal venetian with swivelling

169.00 mechanism are provided between teo glasses with out side contol ,area of Smt. 1.00 6470.00 64.70

glass panels shall measured in this item and rest partition REA SHALL BE

MEASURED in saparte item as, specifed in specificatiion sheet. MR

Providing cabin doors sturedy and matching with partition having overall size

800 X 2100 mm , view glass and hardwere like handless , Door closer and dead

lock etc, detailed specifition are given in attached annexure , as specifed in

specification sheet.MR

Providing & Meium back revoling & tiling chairs as per approved sample by chief

architect / project in charge, back ht is 22 " from the seat , chair under structure

made from 19m X16G CRC pipe , upholstered by 2 inch X 40 denity PU. Foam

and in seat n 1 Inch X32 debity pu foam in back rest covered ith approved tapstry of

matty quality . soft pu handle as per sample bottom :38 mm dia X 1.6 mm thick pipe

used in five prone stand ith castors ingle position lock , gas lift operting system

and synchro tit machanism made from M.S Sheet (2.5, 3.15, 4mm thicknes ), duly

powder cotaed 40 to 50 micon. MR

Providing & Fixing Low height or FUll Height Modular Storage units of upto

mm height, made out of 18mm pre laminated top/bottom board and back side of 9mm

172.00 thk. MDF board. All open edges to be finished with pvc edge band with internal two Smt. 1.00 3162.50 31.63

self including all hardware accessories like handles, magents, hinges etc.

complete as directed by Engineerincharge. MR

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Providing & Fixing Modular Work top of upto 1050 mm width made out of 18mm

thick MDF board, finished with

0.8 mm thick laminate, fixed at appropriate height as directed by

Engineerincharge, with open edges finished with PVC edge band including all

necessary hardwares etc. complete.

Providing and supplying a High Back Chair with Heavy Duty cushion of

density, covered with the mesh, Cotton Mesh back rest, framed in designer PP with

lumber support having Base with Nylon Twin Wheel Castors according to BIFMA

174.00 standard for long life and heavy duty, BIFMA standard tested heavy duty hydraulics for Nos. 1.00 16100.00 161.00

long life, with Fixed PP arm rest, Synchro tilt mechanism with any positioning

locking mechanism with One year warranty, in desired Colour as approved by

EngineerInCharge and Consultant. MR

Removing of Aluminium Partition as directed by engineerincharge by taking due

175.00 care of not damageing the adjascent members and making good damages if Smt. 1.00 720.00 7.20

any etc. complete MR

Credit of material for Alu. Partition Smt.

removed from installation. MR

Removing old wooden Partiton, storage, counter Table and removing electrical fittings

177.00 etc. including handing over the removed material to department as per the directions of job. 1.00 37232.00 372.32

Engineerincharge etc. complete .MR

Providing and fixing hydraulic door closer heavy duty of approved model and

make with necessary screws and finishing etc. complete.MR

Providing and fixing Mortise lock of heavy duty of approved brand and

179.00 manufacture with necessary screws and Nos. 1.00 2160.00 21.60

finishing etc. complete.MR

Providing & Fixing Granite Name Plate of Any size including engraving required text

180.00 matter including painting the engraved fonts in desired colouror golden ink Smt. 1.00 1725.00 17.25

and as approved by engineerincharge etc. complete MR

Providing & Fixing SS Letters of 300 mm height made out of SS Sheet in

approved pattern font as directed by engineerincharge and fixed at site as directions

of competent authority etc.

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and getting out the

soil and disposal of the surplus excavated soil as directed within a lead of 50 Meter

for following diameter of pipes.(iii) 300 mm [R&B SOR 2024-25, Item No.04010C

Providing uniform width and depth groove in plaster at directed intervals and in

183.00 directed pattern to give finished edge as directed by engineer in charge etc. complets. Rmt. 1.00 165.00 1.65

Labour charges for making holes upto

75 mm dia. in Brick masonry or RCC members mechanically with taking all

184.00 necessary precautions to prevent damage to adjoining areas and Nos. 1.00 850.00 8.50

members etc. complete including cost of machine and manpower etc.

Providing & Fixing D Type SS Door Handle of 200 mm Length and made out of

185.00 18 mm SS Pipe as directed by pair. 1.00 3650.00 36.50

Enginerincharge etc. complete.MR

Providing & Fixing D Type SS Door Handle of 300 mm Length and made out of

186.00 18 mm SS Pipe as directed by pair. 1.00 4195.00 41.95

Enginerincharge etc. complete..MR

Providing & fixing signages made out of 1mm SS Plate mounted with venyl or other

appropriate material text of approved font size and fixed at indicated

locations as directed by

Engineerincharge etc. complete.MR

Removing and Refixing of wooden Partition by adopting appropriate

method to minimise damage to the existing members and reusing thesame and

reinstalling the assembly at new place as directed by Engineerincharge etc.

Providing & Fixing Wall Panelling made out of 12 mm both side prelaminated

189.00 MDF board, including making necessary framework on the wall toattain levelled wall Smt. 1.00 4779.00 47.79

panelling as directed by Engineerincharge etc. complete.MR

Providing & applying frosted film on Glass, in required design strips as

190.00 approved by Engineerincharge etc. Smt. 1.00 520.00 5.20

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Providing & laying water proofing treatment on terrace including applying neat

cement slurry 2.75 Kg/Sq.M. on cement admixed with water proofing component

after cleaning the surface, laying cement concrete with brickbat 75 mm to 100 mm

with 50% of cement mortar 1:5 admixed With water proofing component

191.00 over 20 mm thick layer of cm 1:5 to required slope including ramming at Smt. 1.00 870.00 8.70

junction of wall and slab after two days of proper curing applying a second coat of

cement slurry finished the surface with 20 mm thick cm 1:4 china mosaic flooring and

finally finished surface with white cement slurry after finishing with terrace shall

be finished with water for a period of two week MR

Provoding and fixing flush door shutters, solid core construction with frame of first class

hardwood with cross board and face veneer or plywood face panels, including anodised

192.00 alluminium butt hinges with necessary screws. (B) Non-decorative type and block board Smt 1.00 1811.62 18.12

core anodised alluminium butt hinges in flush door shutters (2) 35 mmthick.[R&B SOR

2024-25, Item No.10011 , page no.101]

Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP depress panel

shutter having extra reinforcement on sides & edges in Gel coat finish. The core of the

shutter & frame is to be filed up with injected fire retardant grade polyurethene foam done

in situ alongwith embedded wooden

193.00 pieces for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to Smt. 1.00 2354.22 23.54

be water proof weather proof, termite proof & resistance to mild acid/alkali. Rates are to

be inclusive of S.S hinges with necessary screws &

alluminium fixtures & fastenings & fastener sleeve...[R&B SOR 2024-25, Item No.10037,

Providing & fixing 100 mm wide vertical vanashing blinds as per approved shade &

head rail with tilting device & imported fabrics etc. complete.MR

Providing and playwood lining with but jointed and nails (frame work and cover fillets

195.00 to be measured and paid for separately) (i) 6mm thick ply. Page Sq.Mtr 1.00 304.41 3.04

[R&B SOR 2024-25, Item No.16004A, page no.133]

Providing and playwood lining with but jointed and nails (frame work and cover fillets

196.00 to be measured and paid for separately) (ii) 9mm thick ply. [R&B SOR 2024- Sq.Mtr 1.00 406.72 4.07

25, Item No.16004B, page no.133]

Providing wood work in frames of Doors, windows cleare story windows and

197.00 othersimilar works wrought, framede and fixed in position. (A) Indian Teak Wood 1.00 604.19 6.04

Page [R&B SOR 2024-25, Item No.10001A, page no.99]

Providing & fixing both side lamineted 12mm thick partical an bord for

partishan work including all labour and matiral requred to complet the job..MR

Providing & fixing chain link 2.5 inch spacing 10 guage chain link ect.complete

as directed by engineer- in- charge. (RA)

Providing and fixing extra for row barbed wire weighting 9.38 Kg/100

stranied and fixd to posts G.I Staples. [Unit Rate Tender ID 9236, Item No. 200]

Dismentling barbed wire in fencing includingb making rolls and aslo

including dismentling fencing posts inluding all earth work concrete in base and

201.00 making good the disturbed groung stacking useful matrials directed and disposing rmt. 1.00 53.00 0.53

as directed and disposing of the unseviceble matrials all lead and lift. [Unit Rate Tender

ID-9236, Item No. 201]

providing,laying and mixing trimix vaccum dewatering process of 150mm

cement concrete pavement over a preparaed sub base with concrete grade M20

coarse and fine aggregate confirming to IS 383,maximum size of coarse

aggregate not exceeding 25mm,mixed in a batching and mixing plant as

per approved mix design,transported to site,laid with a fixed form

or slip form paver,spread,copacted and finished in a continuos operation

including provision of contraction,expansion construction and londitudinal

joints,joint filler,seperation membrane,sealent primer,joint

sealent,debonding strip,dowel bar,tie rod,admixtures as approved curing

compound,finishing to lines and grades.RA.

Filling in foundation and plinth with brick Bats Chhara in layers of 20cm.

203.00 thickness including watering, remming and consolidating etc.complete. [R&B SOR 2024- cmt. 1.00 615.31 6.15

25, Item No.04009A, page no.69]

Filling in foundation and plinth with murrum orselected soil in layers of 20cm.

204.00 thickness including watering, ramming and consolidatingetc.complete[R&B cmt. 1.00 274.40 2.74

SOR 2024-25, Item No.04008A, page no.69]

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Boring holes below road surface of upto 100 mm in diameter in ordinary soil by using

auger cutter or other approved equipment, including cutting bulb at bottom half of

the file as directed, and getting out the soil and disposal of the surplus excavated

soil as directed by the engineerincharge etc. complete, within a lead of 50 meter.MR

Boring holes below road surface of upto 200 mm in diameter in ordinary soil by using

auger cutter or other approved equipment, including cutting bulb at bottom half of

the file as directed, and getting out the soil and disposal of the surplus excavated

soil as directed by the engineerincharge etc. complete, within a lead of 50 meter.MR

Boring holes below road surface of upto 300 mm in diameter in ordinary soil by using

auger cutter or other approved equipment, including cutting bulb at bottom half of

the file as directed, and getting out the soil and disposal of the surplus excavated

soil as directed by the engineerincharge etc. complete, within a lead of 50 meter.MR

Providing and Fixing Mosquito Proof GI/MS Wire Mesh of approved quality and make,

208.00 fixed in alluminium, frames/windows with suitable rubber beading, screws and necessary SMT 1.00 2850.00 28.50

fixtures, complete in all respects as directed by the Engineer-in-charge

Providing, Supplying and fixing high - quality transparent/ Invisible bird protection net

made of UV-Stabilized HDPE/nylon material of approved quality, suitable mesh size,

including all necessary fixing accessories such as hooks, clamps, nylon ropes, SS wires

and supports, coplete in all respects as directed by the Engineer-in-charge.

supplying of green net for gaden and

nursery work as per eic.MR

Providing, febricating and fixing 1.20mt Height GI Chain link Jali (50 mm X 50 mm

size of 10 gauge) including cutting and welding members as per detailed drawing

and design as directed by Engineer-in-charge.Providing and Fixing One Row

barbed Wire of Top and Bottom weighting 9.38 kg/100 stranied and fixed to

postes G.I Staples. The rate shall include 2 coats Oil paint of asian paint over all the

surfaces or specified by Engineer-in-charge of approved make and Steel work

211.00 welded, in built up sections, framed work including cutting, hoisting, fixing in position rmt. 1.00 851.00 8.51

and applying a priming coat of red lead paint (A) 45X45X6 mm angles,at 2.5mt

Center to Center Spacing,Height Of Angle 1.65 mt and hallfast Angle Length 0.25 mt

and at Corner Two Support Of Sleant Angle size 45x45x6 mm includind cost of pit

excavation Size 0.30x0.30x0.40 mts in all streta and cement concrete 1:2:4 Size

0.30x0.30x0.40 mts(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) and curing etc. [Unit Rate Tender ID 9236, Item No. 209]

Providing, febricating and fixing 1.50mt Height GI Chain link Jali (50 mm X 50 mm

size of 10 gauge) including cutting and welding members as per detailed dwing and

design as directed by Engineer-in-charge. Providing and Fixing One 25X25X5 mm

angle at Top and Bottom and fixed to postes and chain link by welding. The chain

link shall include 2 coats Oil paint of asian paint over all the surfaces or specified

by Engineer-in-charge of approved make and Steel work welded, in built up

212.00 sections, fmed work including cutting, hoisting, fixing in position and applying a rmt. 1.00 1033.00 10.33

priming coat of red lead paint (A) 45X45X6 mm angles,at 2.5mt Center to Center

Spacing,Height Of Angle 1.95 mt and hallfast Angle Length 0.25 mt and at Corner

Two Support Of Sleant Angle size 45x45x6 mm includind cost of pit excavation

Size 0.30x0.30x0.40 mts in all streta and cement concrete 1:2:4 Size

0.30x0.30x0.40 mts(1 cement : 2 coarse sand : 4 gded stone aggregate 20 mm

nominal size) and curing etc.

Providing, febricating and fixing 1.80mt Height GI Chain link Jali (50 mm X 50 mm

size of 10 gauge) including cutting and welding members as per detailed drawing

and design as directed by Engineer-in-charge.Providing and Fixing One Row

barbed Wire of Top and Bottom weighting 9.38 kg/100 stranied and fixed to

postes G.I Staples. The rate shall include 2 coats Oil paint of asian paint over all the

surfaces or specified by Engineer-in-charge of approved make and Steel work

213.00 welded, in built up sections, framed work including cutting, hoisting, fixing in position rmt. 1.00 1215.00 12.15

and applying a priming coat of red lead paint (A) 45X45X6 mm angles,at 2.5mt

Center to Center Spacing,Height Of Angle 2.25 mt and hallfast Angle Length 0.25 mt

and at Corner Two Support Of Sleant Angle size 45x45x6 mm includind cost of pit

excavation Size 0.30x0.30x0.40 mts in all streta and cement concrete 1:2:4 Size

0.30x0.30x0.40 mts(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) and curing etc. [Unit Rate Tender ID 9236, Item No. 211]

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Providing and fixing 1.20 meter high tencing with 2.0 meter long Cement

Concrete posts 100 mm x 100mm and oil painting with three coats of paint, fixed at

meter C/C with five horizontal lines and two diagonals of galvanised stell barbed

wire weighing 9.38 Kg/ 100 rmt, strained and fixed to posts with G.I. staples, including

fixing the posts in ground with 0.50 meter × 0.50 meter X 0.50 meter × 0.50 meter

block in C.C. 1:5:10 etc completed. [Unit Rate Tender ID 9236, Item No. 212]

Providing, febricating and fixing 1.50mt Height Eight Row Horizental and 2 Row

Diagonals barbed Wire weighting 9.38 kg/100 stranied and fixed to postes G.I

Staples including cutting and welding members as per detailed drawing and design

as directed by Engineer-in- charge. The rate shall include 2 coats Oil paint of asian

paint over all the surfaces or specified by Engineer-in-charge of approved make and

Steel work welded, in built up sections, framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint (A)

45X45X6 mm angles,at 2.5mt Center to Center Spacing,Height Of Angle

1.95mt and hallfast Angle Length 0.25 mt and at Corner Two Support Of Sleant

Angle size 45x45x6 mm includind cost of pit excavation Size 0.30x0.30x0.40 mts

in all streta and cement concrete 1:2:4 Size 0.30x0.30x0.40 mts(1 cement :

coarse sand : 4 graded stone aggregate 20 mm nominal size) and curing etc

complete as per drawing and directed by Engineer in Charge. [Unit Rate

Providing, febricating and fixing 1.80mt Height Nine Row Horizental and 2 Row

Diagonals barbed Wire weighting 9.38 kg/100 stranied and fixed to postes G.I

Staples including cutting and welding members as per detailed drawing and design

as directed by Engineer-in- charge. The rate shall include 2 coats Oil paint of asian

paint over all the surfaces or specified by Engineer-in-charge of approved make and

Steel work welded, in built up sections, framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint (A)

45X45X6 mm angles,at 2.5mt Center to Center Spacing,Height Of Angle

2.25 mt and hallfast Angle Length 0.25 mt and at Corner Two Support Of Sleant

Angle size 45x45x6 mm includind cost of pit excavation Size 0.30x0.30x0.40 mts

in all streta and cement concrete 1:2:4 Size 0.30x0.30x0.40 mts(1 cement :

coarse sand : 4 graded stone aggregate 20 mm nominal size) and curing etc

complete as per drawing and Directed by Engineer In Charge. [Unit Rate

Providing soak pit 3.5 m Outer Dia,.2.80 mt Inner Dia and 8 mt Height including

excavating brick-masonry with dry masonry work .Brick Beats covering the top

with RCC Slab 0.15 mt thickness and Form Work,incl.C.I. Cover with frame 600mm

x 850mm, Providing, laying and jointing in true line and level 110 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 etc Complete as directed by

engineer incharge. [Unit Rate Tender ID 9236, Item No. 215]

Providing and fixing precoated galvanised iron profile sheets (size,

shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm

(+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS:

in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and

polyester top coat 15-18 microns. Sheet should have protective guard film of

218.00 microns minimum to avoid scratches during transportation and should be supplied in smt. 1.00 1256.00 12.56

single length upto 12 metre or as desired by Engineerin-charge. The sheet

shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with

EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces,

excluding the cost of purlins, rafters and trusses and including cutting to size and shape

wherever required.MR

Informatory Signs: Providing and fixing sign boards made out of 2mm

aluminium sheet, size 60X80cms.rectangle as per the design ofIRC-

67-1997 Pre-treated with phospheting process & acid itching; coated with

one coat of epoxy primer and two coats of best quality epoxy paint; reflectorized

with retro reflective sheeting as per latest M.O.S.T. Specifications ;3.1m long

219.00 stand post and frame fabricated from suitable size iron angle of 35X35X3mm No. 1.00 3818.71 38.19

75X75X6mm as required; painted with best quality epoxy coatings in black

and while bands. The details of symbol for each board shall be as per the instruction

of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size

45X45X60cms. For each leg. The supervision of engineer in charge[R&B

SOR 2024-25, Item No.26093A, page no.189]

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Hire charges for high deep suction cum jetting Machine having minimum 6000 litter

suction tank + 3000 litter Jetting tank storage capacity fitted on 16 ton GVW

chassis with imported make heavy duty suction pump having flow rate minimum

2000m3/hr @ 3300 rpm suction from depth of 36 feet with 5 inch dia suction

hose and 260 LPM 3000 PSI pump, 1†dia ID jetting hose capacity including all

cost of O & M i.e supervisor, Driver, Operator, labour, oil, fuel, & lubricant repairing

with spare, government taxes insurance of vehicle and any kind of expenditure etc.

for cleaning of toilet sock pit and discharge waste hygeinically at Gmc Area.MR

Masonary work using Aerated light weight concrete block having crushing

strength not less than 35 kg/sqcm for super structure above plinth level upto floor

two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per Technical

Specification.[R&B SOR 2024-25, Item No.6014, page no.85]

Pro. And fixing 50mmx50mmx6mm angle welded metal section with five

horizontal lines G.I. barbed wire fencing, weighting 9.38 kg per 100 mts

including fixing concentrino razor blade 12 G wire loop of 610 mm dia on top of wall,

applying priming coat and pai. [Unit Rate Tender ID 9236, Item No. 220]

providing,laying and mixing trimix vaccum dewatering process of 150mm

cement concrete pavement over a preparaed sub base with concrete grade M25

coarse and fine aggregate confirming to IS 383,maximum size of coarse

aggregate not exceeding 25mm,mixed in a batching and mixing plant as per approved

223.00 mix design, transported to site, laid with a fixed form or slip form cmt 1.00 6850.00 68.50

paver,spread,copacted and finished in a continuos operation including provision of

contraction,expansion construction and londitudinal joints,joint filler,seperation

membrane,sealent primer,joint sealent,debonding strip,dowel bar,tie

rod,admixtures as approved curing compound,finishing to lines and grades.(RA)

Providing and fixing S.S.sink glocy ASIS 304 Grade x 1 mm thick with over all

size610mm x 460mm & bowl size 560 x 410 x 200 as approved by engneer in charge

with all labour and material requred to complet the job. [R&B SOR 2024-25, Item

No.M729, page no.38]

Providing, febricating and fixing 2.40 mt Height GI Chain link Jali (50 mm X 50 mm

size of 10 gauge) including cutting and welding members as per detailed drawing

and design as directed by Engineer-in-charge.Providing and Fixing One Row

barbed Wire of Top and Bottom weighting 9.38 kg/100 stranied and fixed to

postes G.I Staples. The rate shall include 2 coats Oil paint of asian paint over all the

surfaces or specified by Engineer-in-charge of approved make and Steel work

225.00 welded, in built up sections, framed work including cutting, hoisting, fixing in position rmt. 1.00 1562.00 15.62

and applying a priming coat of red lead paint (A) 45X45X6 mm angles,at 2.5mt

Center to Center Spacing,Height Of Angle 2.85 mt and hallfast Angle Length 0.25 mt

and at Corner Two Support Of Sleant Angle size 45x45x6 mm includind cost of pit

excavation Size 0.30x0.30x0.40 mts in all streta and cement concrete 1:2:4 Size

0.30x0.30x0.40 mts(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) and curing etc. [Unit Rate Tender ID-9236, Item No. 223]

Providing and Fixing PVC Flooring 1.5 mm thick incl Soluation to With flooring as

226.00 per instruction of Engineer in SMT 1.00 1375.00 13.75

Repairing of fabrication work using welding machine with including

labour,welding rod and transportation etc. complete as per requirement and

specification as directed by engineer in

providing and fixing 5mm thick four side polished miror size (0.60 mt x 0.45 mt)

approved by engineer in charge.MR

Providing and fixing Hand spray p.v.c.

etc.complete.approved by engineer in charge.MR

Providing and fixing Jet spray with 1.00M PVC tube etc.complete.approved by

engineer in charge.MR

providing and fixing 3mm thick glass for ventilation repairing with cutting

approved by engineer in charge.MR

Providing and fixing flush tank12.5 liter with fitting etc.complete.approved by

engineer in charge.MR

Providing and fixing gully trap cover etc.complete.approved by engineer in

Providing and fixing chamber cover CI size(0.60 x 0.60) etc.complete.approved by

engineer in charge.MR

Providing and fixing chamber cover CI size(0.60 x 0.45) etc.complete.approved by

engineer in charge.MR

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

providing and fixing standard glow sign board(Eco star backlit + Electronic chock

lighting + framing ) as required size including transporting and fitting as per

approved and directed by engineer in charge. [Unit Rate Tender ID 9236, Item

Supplying and fixing 18 mm thick black granite takati for khatmuhurt/

innogration including carving of letters and logo etc.and painting golden color in

letter and logo as required size as per approved and directed by engineer in

Providing and Fixing roller blind using selected shade of 99.5% sun Controal Fabric

etc complted.as per directed by engineer .MR

Excavation for pipe line trenches for water supply, sewerage line, manhole etc.

all with shoring and struting if required as per required gradient and line

including safety provisions using site rails and stacking excavated stuff including

up to all required lead cleaning the site etc. complete for all lifts and strata as

specified.(upto 1.5 m) 1.A.1)(a) In all sorts of soil and soft murrum [GWSSB SOR 2022-

23, Item No.1, page no.32]

b) In hard murrum, boulders incl. Cmt

c) In soft rock and/or masonry in CM or Cmt

L M or Lime Concrete.

d) In hard rock and / or in C. C. 1:2:4 or RCC with blasting, breaking, chiseling, or by

chiseling/breaking only.

1.A.2 ) 1.50 mt to 3.00mt depth a) In all sorts Cmt

of soil and soft murrum

b) In hard murrum, boulders incl. Cmt

c) In soft rock and/or masonry in CM or Cmt

L M or Lime Concrete.

d) In hard rock and / or in C. C. 1:2:4 or RCC with blasting, breaking, chiseling, or by

chiseling/breaking only.

1. A.3) 3.00 mt to 4.50 mt depth a) In all sorts Cmt

of soil and soft murrum

b) In hard murrum, boulders incl. Cmt

c) In soft rock and/or masonry in CM or Cmt

L M or Lime Concrete.

d) In hard rock and / or in C. C. 1:2:4 or RCC with blasting, breaking, chiseling, or by

chiseling/breaking only.

1.A.4 )4.50 mt to 6.00 mt depth a) In all sorts Cmt

of soil and soft murrum

b) In hard murrum, boulders incl. Cmt

c) In soft rock and/or masonry in CM or Cmt

L M or Lime Concrete.

d) In hard rock and / or in C. C. 1:2:4 or RCC with blasting, breaking, chiseling, or by

chiseling/breaking only.

Excavation in Bituminous Road Excavation in bituminous road as per

required gradient and line including safety provisions using site rails and

stacking excavated stuff including up to all required lead cleaning the site etc.

complete for all lifts as specified.[GWSSB SOR 2022-23, Item No.2, page no.33]

Providing bedding incl. ramming, watering, levelling, consolidating etc.

Complete as per standard and instruction of engineer incharge (1). As

above with selected excavated earth available near site [GWSSB SOR 2022-23, Item

No.3, page no.33]

(2)As above with Murrum brought from Cmt

outside inclduing all lead

258.00 (3)As above with required quality Sand brought from outside inclduing all lead Cmt 1.00 329.00 3.29

Providing and supplying in standard length ISI mark rigid unplasticised PVC pipes

suitable for potable water with ring fitjoint including cost of rings, as per IS

specification no. 4985/1988 including all local and central taxes, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance to the

departmental stores and including cost of jointing meterial etc. complete (test pressure

10 kg/cm²) 63 mm[GWSSB SOR 2022-23, Item No., page no.32]

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Providing and supplying D. I. K-7 grade pipes for following nominal bore

diameter with internal cement mortar lining including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading, unloading,

272.00 conveyance to departmental stores, stacking etc. complete. (IS 8329-2000). Rate Rmt 1.00 794.00 7.94

for DI pipe based on Wholesale Price index of Pig Iron as 157.60 for the month of Dec-

2022. For sewerage project cement mortor lining shall be with sulphate resistance cement.

80 mm [GWSSB SOR 2022-23, Item No.2.1 (2.1B) page no.5].

Providing and supplying ISI mark G. I. pipes with Couplings of following class and

diameter including all taxes, insurance, transportation, freight charges,

280.00 octroi, inspection charges, loading, unloading, conveyance to departmental Rmt 1.00 114.00 1.14

stores, stacking etc. complete. (IS -1239) (Not for well/tube well column pipe)

15mm [GWSSB SOR 2022-23, Item No.6.1 (6.1C) page no.11]. (Heavy Duty)

Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting

Cement) in standard lengths of following class and diameter suitable for

either collar joints or rubber ring joints including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. 150mm [GWSSB SOR 2022-23,

Item No.10 (10.1D) page no15]. (Class NP3 Test Pressure 0.7 Kg/sq.cm)

Corrugated DWC HDPE pipes (non- pressure pipes). Providing and supplying of

Class SN8 Structured Wall polyethelene Piping systems (Pipe with

online/offline couplerand elastomeric sealing ring) with non-smooth External Annular

Corrugated and Smooth Internal Surfaces (Double Wall) for non- pressure

underground Sewerage & Drainage application as per EN:13476-3 including all

local and central taxes, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores etc. complete. 75mm [GWSSB

SOR 2022-23, Item No.5 page no.10].

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Providing and supplying hose Pipes for following nominal bore diameter

including all taxes, insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to departmental stores, stacking etc.

complete. (1) 100mm

DI Specials.Manufacture, Supply & Delivery of Ductile Iron Flange socket

spigot bends, tees, reducers or any other specials as per BS-EN-545/1995 Class-A

series K12 suitable for use with D.I. Pipes manufactured as per

313.00 IS:8329/1994delivery of specials is to be made to GWSSB store or site of works any Kg 1.00 148.00 1.48

where in Gujarat including all taxes, loading, unloading, carting, stacking, insurance,

inspection charges, octroi etc. complete. With external bitumen & zinc coating &

internal cement mortar lining Socket & Spigot Type 80 to 300 mm dia.

315.00 Flanged ended 80 to 300 mm dia. Kg 1.00 155.00 1.55

PVC fittings: Providing and supplying at store or site of work incl. freight,

loading, unloading, stacking, insaurance & all taxes etc. complete P. V. C.

Couplers 10 Kg/cm2 (Moulded) 63 mm [GWSSB SOR 2022-23, Item No.8 (9.2B) page

P. V. C. Tail Piece with P. V. C. Flange No.

324.00 (ISI) Heavy duty (Moulded) 63 mm [GWSSB SOR 2022-23, Item No.8 (9.2C) page 1.00 158.00 1.58

Service Saddle 25 mm (Moulded) heavy 63 mm [GWSSB SOR 2022-23, Item No.8 No.

P. V. C. Tee (Moulded) 63 x 63 mm [GWSSB SOR 2022-23, Item No.8 (9.2E) page No.

P. V. C. Elbow (Moulded) 63 mm [GWSSB SOR 2022-23, Item No.8 (9.2F) page no.12].

P. V. C. Reducer (Moulded) 200 x 160 mm [GWSSB SOR 2022-23, Item No.8 No.

(9.2G) page no.12].

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

P. V. C. Bend 900 (Moulded) Heavy 63 mm [GWSSB SOR 2022-23, Item No.8 No.

(9.2K) page no.13].

L,L& J of G.I.Pipes. Lowering, laying and jointing G. I. pipes with G. I. specials of

following diameters in proper position, grade and alignment as directed by

374.00 Engineer-in-charge including conveyance from stores to site of work, labour, Rmt 1.00 13.00 0.13

giving hydraulic testing, etc. complete (1) 32 mm.[GWSSB SOR 2022-23, sec-B Item

No.07, page no.36]

Lowering, laying, fixing and jointing PVC/uPVC/cPVC pipes and specials of

following class and diameter including cost of conveyance from stores to site of

382.00 works including cost of labour, material, cement solvent, giving Rmt 1.00 12.00 0.12

satisfactory hydraulic testing as per ISI

code (1)63 mm.[GWSSB SOR 2022-23, sec-B Item No.08 , page no.37 ]

Lowering, Laying And Jointing C.I. S & S Spun Suitable For tyton Joints/ Mortar Lined

D.I. Pipes Of Various Classes With CI/MS Special Of Following Diameter In Proper

Position, Grade And alignment As Directed irection of Engineer- in-charge

(80mm)[GWSSB SOR 2022-23, sec-B Item No.06 , page no.36 ]

Lowering, laying and jointing R. C. C. pipes (NP3 type) in C. M. 1:1 1/2 of

following diameters in proper position, grade and alignment at all level as

403.00 directed by Engineer-in-charge including conveyance from stores to site of Rmt 1.00 40.00 0.40

work, labour, giving hydraulic testing as per ISI code(11.B) .(1) 80 mm.[GWSSB SOR

2022-23, sec-B Item No.11, page no.39]

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

L,L& J of Corruguated DWC HDPE Pipes (Gravity Line). Lowering, laying and

jointing of class SN 8 structured wall ( External Annular Corrugated & Smooth

Internal surface) Polyethylene Piping and fittings with the help of coupler ( on line /

off line ) attached with one end of pipes, sliding over the elastomeric sealing

rubber ring placed on the specified valley of the corrugation at the spigot end,

lowering the same into the trench at all level, laying on the lower bedding

(constructed at bottom of trenches) at prescribed gradient,depth &

alignment ,testing the water tightness of the joints, ensuring the continuity tests of

specified pipe segments etc. complete as per drawing,specifications &

detailed engineering, including carriage of pipes & fittings from site stacks to the place

of laying etc. as per direction of Engineer- in-charge. (1) 75 mm.[GWSSB SOR 2022-23,

sec-B Item No.10 , page no.38]

Providing and making flanged joints to flanged DI / C.I. pipes of all classes / specials

etc. including cost of all jointing materials rubber packing, nut bolts,inclduing lowering

laying jointing labour hydraulic testing etc. complete. (1.) 80mm .[GWSSB SOR 2022-23,

sec-B Item No.6 , page no.35]

Lowering, jaying and jointing C.I. S & S Spun pipes suitable for Tyton joints / Mortar

lined D.I. Pipes of various classes with CI / MS specials of following diameters in

433.00 proper position, grade and alignment as directed by Engineer-in-charge including Rmt 1.00 50.00 0.50

hydraulic testing etc. comp. (1.) 80mm .[GWSSB SOR 2022-23, sec-B Item No.6 , page

Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846 (Latest

Edition) of following class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete. (13.1.A) PN-1 With hand

wheel /cap operated (PD type short body) (1)50 mm.[GWSSB SOR 2022-23, sec-A

Item No.13, page no.21]

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Providing and supplying ISI mark CI D/F Butterfly Valves as per IS:13095 (Latest

Edition) of following class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete (14.1.A) Butterfly

valves IS 13095 with ISI mark PN 1.0 (1)50 mm.[GWSSB SOR 2022-23, sec-A Item

No.14, page no.23]

Providing and supplying ISI mark CI D/F Reflux Valves as per IS:5312 (Latest

Edition) of following class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete. (15.1.A) Reflux valves

PN 1.0 IS 5312 with ISI mark (1)50 mm .[GWSSB SOR 2022-23, sec-A Item No.15,

Lowering, laying and jointing in position following C. I. / D/F Reflux valves,

Butterfly valves, Sluice valves and Air valves including cost of all labour,

jointing material, including nut bolts and giving satisfactory hydraulic testing, etc.

complete.(a.)(1) 50 mm.[GWSSB SOR 2022-23, sec-B Item No.15, page no.40]

Dewatering. (1) In all sorts of soil and soft murrum, hard Murrum and boulders,

494.00 Soft Rock, Hard Rock, upto 1.5 mt. depth from G. L..[GWSSB SOR 2022-23, sec- Cmt 1.00 17.00 0.17

B Item No.13, page no.40]

(2)Extra for dewatering in all sorts of strata’s, for each 1.5 mt. or part

thereof beyond 1.5 mt. depth

Refilling of pipeline trenches (1 )Refilling the pipeline trenches incl. ramming,

496.00 watering, consolidating desposal of surplus stuff as directed within a radius of 3 Cmt 1.00 22.00 0.22

km..[GWSSB SOR 2022-23, sec-B Item No.14, page no.40 ]

(2)with selected soil brought from outside Cmt

including all lead

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Providing and constructing Sewer manholes, scraper manholes and unit house

connection chamber, as per the type design in brick masonry in C. M. 1:5 and

inside and outside 20mm thick plastering in C. M. 1:3 necessary 100 mm coping

with reinforcement in R.C.C.M. 200 fixing C. I. steps and fixing manhole frame

and covers (But excluding supply of manhole frame and covers) over manholes

and house connection chambers and fixing Manhole covers (but

excluding supplying of manhole covers) over scraper manhole etc.

complete, providing and fixing safety chain wherever necessary as per

the stipulations in the type design complete as per latest CPHEEO manual. (excl.

excavation).(a) Manhole type "A" Circular type having inside diameter of 1200 mm for

depth upto 1.5 m depth (for 150 mm to 500 mm dia sewer) 1) Manhole type "A" as above

but upto 1.0 M depth.[GWSSB SOR 2022-23, sec-2D Item No.2, page no.101]

2) Extra depth beyond 1.0 M but upto

1.5 M depth for "A" type manhole above

(b) Manhole type "B" circular type having inside diameter of minimum 1500 mm

500.00 and for depth from 1.5 M to 4.0 M (for 150 mm to 600 mm dia sewers) 1) Nos 1.00 21116.00 211.16

Manhole type "B" as above but upto 1.5 M depth.

2)Extra depth beyond 1.5 M but upto

4.0 M depth for type "B" manhole above.

(C)Manhole type "C" circular type having inside diameter of minimum 1500 mm

and for depth beyond 4.0 m to 6.0 m (for 150 mm to 1800 mm dia sewers) 1)

Manhole type "C" as above but upto

2) Extra depth beyond 4.0 M and up to

6.0 M depth for type "C" Manhole above

Providing and Fixing Perforated Precast Concrete Heavy Duty Type Storm Catchpit

Frame & Cover in M30 Grade in Any Size

Sign Board per square Meter :-Providing and fixing sing boards made out of 2mm

aluminium sheet; size 1 Meter x 1 Meter as per the design given by

engineer in charge pre treated with phospheting process & acid etching; coated

with one coat of epoxy primer and two coats of best quality epoxy paint;

reflectorised with retro reflective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be as per IRC-30-1968, 3.1m long (2

nos) stand post and frame may be fabricated either from suitable size iron angle of

x 35x 3mm & 50 x 50 x 5mm & 75 x 75 x 6mm as required painted with best quality

epoxy coatings in black and white bends. the details of symbol or inscription /

numerals for each board shall be as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each

leg. including excavation curing etc. complete under the supervision of

engineer in charge.(A) Engineering [R&B SOR 2024-25, Item No.26103A, page

Tree guard sign :-Providing & fixing sign board made out of 2mm aluminium sheet,

size 30cms diameter circle, pre- treated with phospheting process and acid etching,

painted with one coat of epoxy primer and two coats of best quality epoxy paint

reflectorised with retro reflective sheeting as per latest M.O.S.T. specifications (As per

attached drawing)(A) Engineering Grade.[R&B SOR 2024-25, Item No.26107A, page

Route marker sign :-Providing & fixing sign boards made out of 2mm

aluminium sheet, size 60x45cms. rectangle plus 30x25cms additional plate

as per the attached drawing (IRC) pre treated with phospheting process & acid etching.

coated with one coat of epoxy primer and two coats of best quality epoxy paint

reflectorised with retro sheeting as per latest M.O.S.T. Specifications ; 3.1m long

stand post and frame fabricated from iron angle of

35 x 35 x 3mm , 75x75x6mm as required, painted with best quality epoxy

coating in black and white bends The details of numerals for each board shall be as

per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC

block of size 45 x 45x 60cms. for each leg, including excavation curing etc.

complete under the supervision of engineer in charge.(A) Engineering

Grade[R&B SOR 2024-25, Item No.26108A, page no.204]

Danger Plate Sign :-Providing & fixing sign board made out of 2mm aluminium sheet,

size 30cms diameter circle, pre- treated with phospheting process and acid etching,

painted with one coat of epoxy primer and two coats of best quality epoxy paint

reflectorised with retro reflective sheeting as per latest M.O.S.T. specifications (As per

attached drawing)(A) Engineering Grade[R&B SOR 2024-25, Item No.26109A, page

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Railway crossing sign: Providing & Fixing sign boards made out of 2mm

aluminium sheet, size 90x90x90cms. triangle plus 90 x 30cms additional plate as per

the attached drawing (IRC) pre treated with phospheting process & acid etching.

coated with one coat of epoxy primer and two coats of best quality epoxy paint

reflectorised with retro sheeting as per latest M.O.S.T. Specifications 3.1. long

509.00 stand post and frame fabricated from iron angle of 35 x 35 x 3mm , 75 x 75 x 6mm as No. 1.00 5030.71 50.31

required painted with best quality epoxy coatings in black and white bends. The fixing

at site shall be in 1:2:4 CC block of size 45 x

45 x 60 cms for each leg. including excavation curing etc. complete the

supervision of engineer in charge.(A) Engineering Grade[R&B SOR 2024-25, Item

No.26110A, page no.206]

Four/Two lane Ahead sign :-Providing & Fixing sign boards made out of 2mm

aluminium sheet, size 120 x 120 cms square plus 120 x 60cms additional plate

as per the attached drawing pre treated with phospheting process & acid etching.

coated with one coat of epoxy primer and two coats of best quality epoxy paint

reflectorised with retro sheeting as per latest M.O.S.T. Specifications; Letters

510.00 and numerals should be as per IRC-30-1968,3.1m long (2nos) stand post and frame No. 1.00 11380.51 113.81

fabricated either from iron angle of 50x50x5mm, 75x75x6mm as required, painted

with best quality epoxy coating in black and white bends The fixing at site shall be in

1:2:4 CC block of size 45 x 45x 60cms for each leg, including excavation curing etc.

complete under the supervision of engineer in charge.(A) Engineering

Grade[R&B SOR 2024-25, Item No.26111A, page no.207]

Diversion sign board :-Providing & Fixing sign boards made out of 2mm

aluminium sheet, size 180 x 60 cms. rectangle as per the attached drawing pre

treated with phospheting process & acid etching. coated with one coat of epoxy

primer and two coats of best quality epoxy paint reflectorised with retro

reflective sheeting as per latest M.O.S.T. Specifications; Letters and numerals

511.00 should be as per IRC-30- 1968,3.1m long (2nos) stand post and frame fabricated No. 1.00 6731.60 67.32

from iron angle of 35x35x3mm, 50x50x5mm painted with best quality epoxy

coatings in black and white bends. The fixing at site shall be in 1:2:4 CC block of size

45 x 45x 60cms for each leg, including excavation curing etc. complete under the

supervision of engineer in charge.(A) Engineering Grade[R&B SOR 2024-25,

Item No.26112A, page no.208]

Kerb guard sign board (small) :- Providing & Fixing sign boards made out of

2mm aluminium sheet, size 240 x 30 cms in U shape; as per the attached drawing pre

treated with phospheting process & acid etching. coated with one coat of epoxy primer

and two coats of best quality epoxy paint reflectorised with retro sheeting as

M.O.S.T. Specifications; stand post and frame fabricated from iron angle of

50x50x5mm, 10mm sq. bar as required, painted with best quality epoxy coating the fixing

at site shall be in 1:2:4 CC block of size 45 x 45x 60cms for each leg, including

excavation curing etc. complete under the supervision of engineer in

charge.(A) Engineering Grade[R&B SOR 2024-25, Item No.26113A, page no.209]

Around the Island/road direction sign board (Big) :-Providing & Fixing sign

boards made out of 2mm aluminium sheet, size 180 x 60 cms rectangle as per the

attached drawing pre treated with phospheting process & acid etching. coated with

one coat of epoxy primer and two coats of best quality epoxy paint reflectorised

with retro reflective sheeting as per latest M.O.S.T. 3.1m long (2nos) stand

post and frame fabricated from iron angle of 50x50x5mm, painted with

best quality epoxy coating the fixing at site shall be in 1:2:4 CC block of size 45 x 45x

60cms for each leg, including excavation curing etc. complete under the supervision of

engineer in charge.(A) Engineering Grade[R&B SOR 2024-25, Item No.26115A,

Cautionary Warning Sign :-Providing and fixing sing boards made out of 2mm

aluminium sheet; size 90 x 90 x 90 cms. equilateral triangle as per design of IRC- 67-

1977. Pre treated with phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint ;reflectorised with retro

reflective sheeting as per latest M.O.S.T.Specifications; 3.1m long stand post and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm, 75 x 75 x

6mm as required; painted with best quality epoxy coatings in black and white bends.

The details of symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for

each leg. Including excavation, curing etc.complete under the supervision of

engineer in charge.(A) Engineering Grade[R&B SOR 2024-25, Item No.26092A,

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Informatory Signs :-Providing and fixing sing boards made out of 2mm

aluminium sheet; size 80 x 60cms. rectangle as per the design of IRC 67-

pre treated with phospheting process & acid itching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint; reflectorised with retro reflective

sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm75x75x6mm as required;

painted with best quality epoxy coatings in black and white bands. the details of

symbol for each board shall details of symbol for each board shall be as per

the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of

size 45 x45 x 60cms. for each leg. including excavation curing tec.

complete under the supervision of engineer in charge.(A) Engineering

Grade[R&B SOR 2024-25, Item No.26093A, page no.189]

Regulatory/Mandatory signs :Providing and fixing sing boards made out of 2mm

aluminium sheet; size 60cms. diameter circle as per the design of IRC-67-1977 pre

treated with phospheting process & acid itching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint; reflectorised with retro

reflective sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as

required; painted with best quality epoxy coatings in black and white bends. the details

of symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for

each leg. including excavation curing etc. complete under the

supervision of engineer in charge.(A) Engineering Grade[R&B SOR 2024-25,

Item No.26094A, page no.190]

STOP SIGN:-Providing and fixing sing boards made out of 2mm aluminium

sheet; size 90 x 90cms. rectangle as per the design of IRC-67- 1977 pre treated with

phospheting process & acid itching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint; reflectorised with retro reflective sheeting as

per latest M.O.S.T. Specifications; 3.1m long stand post and frame fabricated from

517.00 suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as required; painted with best No. 1.00 4629.76 46.30

quality epoxy coatings in black and white bends. the details of symbol for

each board shall be as per the instruction of engineer in charge. The fixing at site shall

be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including excavation

curing tec. complete under the supervision of engineer in charge.(A)

Engineering Grade[R&B SOR 2024-25, Item No.26095A, page no.191]

Parking Signs :-Providing and fixing sing boards made out of 2mm aluminium sheet;

size 60 x 60cms. square plus 60 x 20cms rectangular additional plate as per the

design of IRC-67- 1977 pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best quality epoxy paint;

reflectorised with retro reflective sheeting as per latest

M.O.S.T. Specifications; 3.1m long stand post and frame fabricated from suitable size

iron angle of 35 x 35 x 3mm 75x75x6mm as required; painted with best quality

epoxy coatings in black and white bends. the details of symbol for each board shall

be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4

CC block of size 45 x 45 x 60cms. for each leg. including excavation

curing etc. complete under the supervision of engineer in charge.(A)

Engineering Grade[R&B SOR 2024-25, Item No.26096A, page no.192]

Give Way Sign :-Providing and fixing sing boards made out of 2mm

aluminium sheet; size 90 x 90 x 90cms. equilateral triangle (inverted) as per the design

of IRC-67-1977 pre treated with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised

with retro reflective sheeting as per latest M.O.S.T. Specifications; 3.1m long

519.00 stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3mm No. 1.00 3474.53 34.75

75x75x6mm as required; painted with best quality epoxy coatings in black

and white bends. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing etc. complete under the

supervision of engineer in charge.(A) Engineering Grade[R&B SOR 2024-25,

Item No.26097A, page no.193]

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Direction sign (Junction board):- Providing and fixing sing boards made out

of 2mm aluminium sheet; size 244 x 122cms. rectangle as per the design of IRC-67-

1977 pre treated with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised

with retro reflective sheeting as per latest M.O.S.T. Specifications; Letters

and numerals should be as per IRC-30-1968, 3.1m long (2 nos) stand post and frame

520.00 fabricated from suitable size iron angle of 50 x 50 x 5mm 75x75x6mm as required; No. 1.00 14684.80 146.85

painted with best quality epoxy coatings in black and white bends. the details of

symbol or inscription / numerals for each board shall be as per the instruction

of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing etc. complete under the

supervision of engineer in charge.(A) Engineering Grade[R&B SOR 2024-25,

Item No.26098A, page no.194]

Distance Informatory/ Destination sign

:Providing and fixing sing boards made out of 2mm aluminium sheet; size 180 x

120cms. rectangle as per the design of IRC-67-1977 pre treated with

phospheting process & acid etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint; reflectorised with retro reflective sheeting

as per latest M.O.S.T. Specifications; Letters and numerals should be as per

IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated from suitable size iron

angle of 50 x 50 x 5mm 75 x 75 x 6mm as required; painted with best quality

epoxy coatings in black and white bends. the details of symbol or inscription /

numerals for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for

each leg. including excavation curing etc. complete under the

supervision of engineer in charge.(A) Engineering Grade[R&B SOR 2024-25,

Item No.26099A, page no.199]

Place identification sign :-Providing and fixing sing boards made out of 2mm

aluminium sheet; size 150 x 90cms. rectangle as per the design of IRC-67-

pre treated with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint; reflectorised with retro reflective

sheeting as per latest M.O.S.T. Specifications; Letters and numerals should be as

per IRC-30- 1968, 3.1m long (2 nos) stand post and frame fabricated from suitable size

522.00 iron angle of 50x50x5mm 75x75x6mm as required; painted with best quality No. 1.00 9297.68 92.98

epoxy coatings in black and white bends. the details of symbol or

inscription / numerals for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing etc. complete under the

supervision of engineer in charge.(A) Engineering Grade[R&B SOR 2024-25,

Item No.26100A, page no.196]

Village name/ Bump Ahead sign :- Providing and fixing sing boards made out

of 2mm aluminium sheet; size 90 x 60cms. rectangle as per the design of IRC-67-

1977 pre treated with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised

with retro reflective sheeting as per latest M.O.S.T. Specifications; Letters

and numerals should be as per IRC-30-1968, 3.1m long (2 nos) stand post and frame

523.00 fabricated from suitable size iron angle of 50 x 50 x 5mm painted with best quality No. 1.00 4995.41 49.95

epoxy coatings in black and white bends. the details of symbol or inscription /

numerals for each board shall be as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg.

including excavation curing etc. complete under the supervision of engineer

in charge.(A) Engineering Grade[R&B SOR 2024-25, Item No.26101A, page

Hazard Marker Sign :-Providing and fixing sing boards made out of 2mm

aluminium sheet; size 90 x 30cms. rectangle as per the design/drawing attached

(IRC) pre-treated with phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with

retro reflective sheeting as per latest M.O.S.T. Specifications; 3.1m long stand

post and frame fabricated from suitable size iron angle of 35 x 35 x 3mm & 50 x 50 x

5mm painted with best quality epoxy coatings The fixing at site shall be in 1:2:4 CC

block of size 45x45x 60cms. for each leg. including excavation curing etc.

complete under the supervision of engineer in charge.(A) Engineering

Grade.[R&B SOR 2024-25, Item No.26102A, page no.198]

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Men at work (Heavy) sign :-Providing and fixing sing boards made out of 2mm

aluminium sheet; size 120 x 90cms. rectangle as per the attached drawing. pre

treated with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint; reflectorised with retro

reflective sheeting as per latest M.O.S.T. Specifications; Letters and numerals

should be as per IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated from

suitable size iron angle of 50 x 50 x 5mm painted with best quality epoxy

coatings in black and white bends. the details of symbol or inscription / numerals

for each board shall be as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg.

including excavation curing etc. complete under the supervision of engineer

in charge.(A) Engineering Grad[R&B SOR 2024-25, Item No.26104A, page no.200]

Road marking with hot applied thermoplastic paints with reflectorising glass beads on

bitumin surface providing and laying a hot applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is

excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be

level, uniform and free from streaks and holes. zebra patta /bump patta lane/center line/

526.00 edge line/cut patta. The white color marking should provide liminance coefficinet on Sq.mt 1.00 626.05 6.26

cemend road shalll be min 130 mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day time. The marking should meet the

performance criteria for night time reflectivity, wet reflectivity and skid resistance as

mentioned in the section-15 of IRC 35-2015. The material strictly as per the MoRTH

standard of Make Asian , Katalline , Berger, Automark, GR, or equivalent

Painting lines, deashes, arrows, letters etc on roads, Air fields and like in two coats

with road marking paint, brushing including cleaning the surface of all dirt, dust and

other foreign matter. (i) Over 10cm in width [N.H SOR 2022-23, Item No. 8.11(i), Pg.

Providing corrugated G.I. sheet of class- 3 roofing fixed with glavanished iron J or L

Hooks, Bolts and nuts 8mm diameter with bitumen and G.I.limpet washer or G.I.

limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thicksheet.[R&B SOR 2024-25, Item No.15001A, page no.131]

Demolition and disposal of unserviceable materials with all lead and lift.(i)

Unreinforced Concrete. MR

RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store or

at site of work precast RCC M.200 Frame & cover suitable to drainage M.H.

530.00 and as per type design & Drawing including cost of reinforcement M.S. Angles or No. 1.00 1121.00 11.21

Flat, curing mold work etc.(10.4.A1) Heavy Duty Frame suitable for 50cm

opening of MH[GWSSB SOR 2022-23, Item No.10.4, page no.16]

531.00 (10.4.A2)Cover suitable for 50cm opening of MH No. 1.00 1173.00 11.73

(10.4.B1)Light Duty Frame suitable for 50cm No.

533.00 (10.4.B2)Cover suitable for 50cm opening of MH No. 1.00 1066.00 10.66

Barbed wire for fencing of galvanized Quint.

steel wire[R&B SOR 2024-25, Item No.M076 , page no.12]

Relaying of Pavers Labour work for fixing interlocking blocks / any kind

ofpavement on up to 50 mm th sand bedding, levelling,watering and fixing in line &

level as well cleaning thesite etc.comp. as directed [Unit Rate Tender ID 9236, Item

Raising of Existing manhole. Item includes, cutting of existing road surround by

Manhole by dimond cutter machine, dismantling of road in confined area by

breaker machine and carting of dismantled material. Item also included necessary

brick work to raise the manhole at road level in CM 1:3. Item also included

providing & fixing of Manhole frame & Cover at exact road level by using

536.00 Master Emaco S 488 trowelable fibrereinforced thixotropic repair mortar Nos. 1.00 9200.00 92.00

material, Laying of concrete made from MasterEmaco S 346 flowable

micro concrete material in desired thickness and laying of hot mix bituminous

material in upper layer and compaction of hot mix bituminous material by Plate compactor

machine. Rate also included necessary plaster at inside of manhole in CM 1:3 in

mm thickness on raised brickwork. [Unit Rate Tender ID 9236, Item No.503]

Hire charges for 20HP sewage submersible and 63KVA DG set with

pump opertator for dewatering at various site incl.fuel, lifting asnd

lowering installations Charges,labour,Hydra,chain block Etc. [AMC

SOR, SWD, Item No. 01]

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Construction of catch pit for rainwater of size 0.60 x 0.75 mt. (inside clear) incl.

Excavation,refilling PCC 1:4:8 10 cm thick incl. Inside plaster 15 mm thick in CM

1:3 incl. TB masonary 1:6 etc. Comp. Excl. Cost of FRC sloted jali upto 1.50 mt.

Depth.[Unit Rate Tender ID 9236, Item No. 513]

Lowering the manhole incl. Removing and refixing manhole seat cover and fixing

at road level as directed. [Unit Rate Tender ID 9236, Item No.506]

Desilting existing manhole having depth more than 2 mtr with hydraulic bucket auto

mounted rickshaw incl. rental charges of fuel ,skilled operator cum driver &

two labour including opening and closing Manhole & also disposing silt at shown

locations .Rate including one supervisor & equipment i.e. Trikam, Pavda, Rassa,

Battery ,G.T.salia etc. nothing extra to be paid for auto insurance,labour

walfare insurance, depreciation of mechanical machinary etc. MR

Repairing damaged I.C./Raising removing damaged brick work and

repairing by brick masonary in CM 1:5 and plaster in CM 1:3 and fixing

541.00 C.I.Steps and and existing chamber sheet cover,removing the debris from No 1.00 1080.00 10.80

chamber and carting the same as

Cleaning drainage line manhole to manhole using bucket/roading machine with

required labour to remove silt, debries etc comp. as directed so as to remove

542.00 chock up of line excluding dewatering if requried with all safety measours in Rmt 1.00 176.04 1.76

running sewer line and despose of sludege within 5km lead. so as not to distrub any

public. Drainage / SWD Below 600 mm dia MR

543.00 Drainage / SWD Above 600 mm dia MR Rmt. 1.00 243.00 2.43

Providing & supplying hydro jetting machine on rental basis in case of

emergency situation and breack down type of work and also during

544.00 unavoidalable condition as per instruction of engineer in charge for 8 hour Shift 1.00 30000.00 300.00

shift. Rate incluse all necessary shifting fuel and operating charges. (No payment

should be allowed for non working condition of machinery) MR

Providing & supplying hydro super sucker machine on rental basis in case of

emergency situation and breack down type of work and also during

545.00 unavoidalable condition as per instruction of engineer in charge for 8 hour Shift 1.00 70000.00 700.00

shift. Rate incluse all necessary shifting fuel and operating charges. (No payment

should be allowed for non working condition of machinery.) MR

Elevated service Reservior and underground sump cleaning service to maintain clean

hygine and safe water storage. The process includes complete draining of the tank,removal

of sludge,dirt,algae and disposits of the tank walls and floor, high-pressure cleaning an

proper disinfection (upto 3 lacs liter) MR

To provide Tractor with Hydraulic Trolley, driver with fuel, to carryout

different works during day/night for 12 Hrs. Shift. Work shall be carried out as per

the instructions of Engineer In- Charge. No extra charged shall be paid for night

shift. [R&B SOR 2024-25, Item No. H033, Pg. 62]

Hiring Fighter with necessary suction & delivery pipe with Fuel & operators etc.

Supply of labour and sweeper for any building work and M & R work with work

551.00 carried out as per instruction of engineer in charge. [R&B SOR 2024-25, Item No. No. 1.00 505.00 5.05

Supply of carpenter/mason/plumber/electrition 1st class for any building work and M & R

552.00 work with work carried out as per instruction of engineer in charge. [R&B SOR 2024- No. 1.00 729.00 7.29

25, Item No. L025, Pg.54]

Barricading the entire break down or excavated area on rental basis using

wooden ballies / M.S.angles at max. 2.00 meter centre to centre, C.G.I. Sheet,

reflective paint / Board out side to avoid accident & for smooth traffic diversion

553.00 & movement including cautionary board etc. Item also includes for making Rmt 1.00 135.00 1.35

temporary sufficient nos of lighting arrangement through out the work with

necessary required arrangement. ..The same shall be removed after

completion of work. (Only for break down work from start to complete) - MR

Hiring and operating Mud Pumps incl. Cost of fuel and operator including the cost

of to and fro transportation, laying of the delivery hoses as required, lowering

554.00 and lifting the pumps as and when required etc. complete. Set Do As Directed. (No HP/hr 1.00 45.00 0.45

payment should be allowed for non working condition of machinery )(Capacity Of

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Providing and operation dewatering Pump including fuel charges & operator

Charges etc. as directed etc. comp. (Shift for Eight Hour) (For Each Pump Set,

No payment should be allowed for non working condition of machinery ) (Capacity Of

Pump 20 HP) [AMC SOR, Machinary Section, Item No. 01]

45 HP Dewatering Heavy Duty Imported Pump on Rental Basis (as per below T&C)

364m3/hr, 6" delivery and suction

Hiring and operating the 20 KV 3 Phase Electric Generator for operating

desilting machinery, and lighting and other requirements with Arranging diesel

557.00 to run the D.G. Set Do As Directed. 8 Hrs Shift. (No payment should be Shift 1.00 3646.00 36.46

allowed for non working condition of machinery ) [AMC SOR, Machinary Section,

Providing & Supplying JCB Machine on rental basis in case of emergency

situation and break down type work & also during unavoidable condition as per

instruction of engg.incharge , rate includes all nece. shifting, fuel and operating

charges and stacking of useful & non-useful materials separately up to store. (No

payment should be allowed for non working condition of machinery and for pipe line

excavation and laying work) [R&B SOR 2024-25, Item No. H016, Pg. 61]

Providing & Supplying Hitachi Machine- 110 capacity on rental basis in case of

emergency situation and break down type work & also during unavoidable

condition as per instruction of engg.incharge , rate includes all nece.

shifting, fuel and operating charges [AMC SOR, Machinary Section, Item No. 05]

Supplying Electric Breaker Machine for RCC Slab or Asphalt Demolishing Work on

site by using Operator, fuel, power Supply etc. Complete as Directed. (No payment

560.00 should be allowed for non working condition of machinery and for pipe line Shift 1.00 1400.00 14.00

excavation and M.H. work. Allowed only for break down work) [AMC SOR,

Machinary Section, Item No. 09]

Supplying Pneumatic Breaker Machine for RCC Slab or Asphalt Demolishing

Work on site by using Operator, fuel, power Supply etc. Complete as

561.00 Directed. (No payment should be allowed for non working condition of Hr. 1.00 85.34 0.85

machinery and for pipe line excavation and M.H. work. Allowed only for break

down work [R&B SOR 2024-25, Item No. H010, Pg. 61]

Clearing and grubbing road land including uprooting rank vegetation

grassshes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees

cut earlier and disposal of unserviceable materials (C) By mechanical

means in area of light jungle [Unit Rate Tender ID 9236, Item No. 527]

Pre cast Cylindrical Bollard Providing and fixing cylinder pre cast bollard with

exposed/ fair finished made in M-30. Bollard is precast with cement concrete of M-30

grade by providing 4 no of 12 mm dia. tor steel by vibro compaction method

using FRP/steel mould for achive shutttring finish as directed and approved by

EIC. Sample shall be approved. Approximate size of bollard is 1000mm height x

200 mm dia. Rate shall be inclusive of concrete, reinforcements as stated

563.00 in the item description, necessary moulds, pouring, placing, compaction, necessary No. 1.00 1702.00 17.02

curing, all accessories required for fixing, with all taxes, transportation, loading

and unloading charges. Additional reinforcement, if any shall be measured

and paid for in the relevant tender item. The rate shall also include for erecting and

fixing the pieces in position etc complete as per drawing. The rate shall also include

the cost of excavation, base PCC M15 grade and finish good, curing etc complete as

directed by engineer in [R&B SOR TRAFFIC Project, Item No.4]

Benches : Providing and fixing benches with 400mm x 400 mm thk brick

support and seat top of 70mm thick granite slab (sandwiched Granite slab of approved

colour and texture laid over 30 mm thick base cement mortar 1:4 (1 cement: 4 coarse

sand on kotta stone) all joints treated with white cement, mixed with matching

pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to

edges to give high gloss finish etc. complete at all levels. The work shall be

564.00 carried out with precision and the stone seat shall be ensured in correct line and level. No. 1.00 6000.00 60.00

the sandwiched edge shall be covered with granite stone over and above with epoxy

resin based adhesive, including machine polishing to edge to give high Benches :

gloss finish etc. complete as per design approved by Engineer-in- Charge. The rates

shall also be inclusive of all kinds of materials, labour, painting works (all support to be

plastic enamel painted), tools, equipment’s, fixing the stone seat in

position. [Unit Rate Tender ID 9236, Item No. 529]

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Credit of dismental material Credit of Kg.

Dismentling M.S Section / Grill - MR

Credit of alluminum section M.S Section kg.

Credit of Dismentling door Shutte/ Nos.

568.00 Credit of wooden door Shutte - MR Nos. 1.00 345.00 3.45

Credit of sanetariy item - Bras (Bip Cock/ Stop cocok angle cocok / piller

cocok flush cocok ) - MR

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

570.00 G.I Dismentling Pipe 15mm - MR Rmt. 1.00 15.00 0.15

571.00 G.I Dismentling Pipe 25mm - MR Rmt. 1.00 30.00 0.30

572.00 G.I Dismentling Pipe 40mm - MR Rmt. 1.00 35.00 0.35

573.00 G.I Dismentling Pipe 50mm - MR Rmt. 1.00 40.00 0.40

574.00 Dismentling C.I. pipes G.S.W.pipes - MR Kg. 1.00 30.00 0.30

Box cutting the road surface to proper slope and camber for making a base for road

work including removing the excavated stuff and depositing on the road side

slope as directed up to all lead and lift. (R&B SOR 2024-25, Item No. 26B008,page

Providing and fixing 1.50mt High Pre cast RCC Wall including cost of pit

excavation Size 0.30x0.30x0.60 mts in all strata and cement concrete 1:2:4 Size

0.30x0.30x0.60 mts (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) and curing, filling of excavated stuff, etc. Providing and fixing rcc

576.00 precast column of size 0.15x0.15x2.40 mts height as per detailed drawing Smt. 1.00 1550.00 15.50

and design as directed by Engineer-In-Charge. Providing and fixing precast rcc

wall panel of size 2.10x0.05x0.30 mts height as per detailed drawing and

design as directed by Engineer-In-Charge including cost of cement mortar of 1:5 (1-

Cement : 5 - fine sand) for jointing purpose. MR

Type - B, "THRIE" : Metal Beam Crash Barrier Providing and erecting a "Thrie" metal

beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm

above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm

spaced 2 m centre to centre, 2 m high with 1.15 m below ground level, all steel parts and

577.00 fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and mtr 1.00 4059.00 40.59

IS:1364, metal beam rail to be fixed on the vertical post with a space of channel section

150 x 75 x 5 mm, 546 mm long complete as per clause 811)

(N.H S.O.R 2022-23, Item No. 8.23 (B))

WOODEN PARTITION

Providing and fixing of full height solid sandwitch partitions (AS PER

DRAWINGS) using 50 x 50 mm aluminium pipe for framing (minimum grid size of

600 mmx 600mm ), 12mm ply (both sides)of brand greenply ecotech mr,century sainik

578.00 mr,srg etc, teak wood beading patti etc. making of rebates and including all hardware Smt 1.00 3669.00 36.69

items, groove (if shown)50 MM TK , 24 kg density insulation if required,with all

materials,hardwares,ss or powdercoated screws, labour, lead and wastage,scaffolding

etc. complete. And Finished with different materials,and complete the work satisfactorily

as per instruction of architect or Engineer-in charge. [Tender ID: 9236, Item No. 544]

LAMINATE FINISH

Providing and fitting of 1 mm laminate (as per drawing & selection) of brand

greenlam,merinolam,century etc on ply partition with 25 mm x 20 mm teakwood beading

patti design on top as per drawing,and 3mm x 3mm grooves if shown, all material,

adhesives,polish work,labour and hardware, waste of materials,polish work as per

instructions, complete as per instruction of architect.[Basic Rate of Laminate :

2000rs./sheet (8' x 4')] and complete the work satisfactorily as per instruction of architect

or Engineer-in charge. [Tender ID: 9236, Item No. 13]

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

LOW HEIGHT WOODEN PARTITION INCLUDING LAMINATE FINISH

Providing and fixing of low height solid sandwitch partitions (AS PER DRAWINGS)

using 50 x 50 mm aluminium pipe for framing, 12mm ply (both sides)of brand greenply

ecotech mr,century sainik mr,srg etc,50 mm teak wood beading patti on all sides etc. and

finishing it with laminate with 3mm x 3mm grooves if shown, including soft

board,provision for electrical raceway and openable truncking,including all hardware

items,nylon leveler foot rubber, with all materials, required required polish / colour work

,labour, lead,and wastage etc. complete. And Finished with different materials,and

complete the work satisfactorily as per instruction of architect or Engineer-in

charge. [Tender ID: 9236, Item No.546]

Supplying and fixing cat eye (Stimsonite) made out from Acrilo beautile sterine injuction

high compressed molding with reflector made of MMC (prismatic type of size 12cm x

6cm x 2.5cm) provided with bituminous adhesive 100g. with each unit for fixing. (High

Intensity grade)[R&B SOR 2024-25, Item No.26163, page no.231]

Road marking with hot applied thermoplastic paints with reflectorising glass beads on

bitumin surface providing and laying a hot applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is

excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be

level, uniform and free from streaks and holes. zebra patta /bump patta lane/center line/

edge line/cut patta. The white color marking should provide liminance coefficinet on

cemend road shalll be min 130 mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day time. The marking should meet the

performance criteria for night time reflectivity, wet reflectivity and skid resistance as

mentioned in the section-15 of IRC 35-2015. Warranty for the Retro reflectivity should be

two yearsSupplying and fixing cat eye (Stimsonite) made out from Acrilo beautile sterine

injuction high compressed molding with reflector made of MMC (prismatic type of size

12cm x 6cm x 2.5cm) provided with bituminous adhesive 100g. with each unit for fixing.

(High Intensity grade) [R&B SOR 2024-25, Item No. 26161, Pg. 220]

Shape the pothole in square or rectangle. Clean the surface and

remove all loose material. (ii) Prepare the solution in the ratio of 1 kg silane

nanotechnology with 100 litre water (< 1000 ppm TDS). Spray the solution 1 litre

per sqm to make water resistant pothole / patch. (iii) CSS1 with silane for cold mix:

a) Add 0.425 kg silane nanotechnology in 85 kg of CSS1 cationic

bitumen emulsion water based under manual stirring. Add 8.5 litre water (<

ppm TDS) at the rate of 1 litre per sqm followed by spreading of stone dust on it. [Unit

Rate Tender ID 9236, Item No.551]

Providing, laying, spreading and compacting graded stone aggregate to wet

mix macadam specification including premixing the Material with water at

OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in

uniform layers with paver in sub- base / base course on well prepared surface

and compacting with vibratory roller to achieve the desired density.(Compacted

mm thick in Two layer of 100 mm each)RA

Construction of granular sub-base by providing coarse graded material, as per MoRTH

specification incl spreading in uniform layers with motor grader on prepared surface,

585.00 mixing by mix in place method with rotavator at OMC, and compacting with vibratory Cmt 1.00 2473.00 24.73

roller to achieve the desired density, complete compacted thickness 150mm of two layers.

[Tender ID 9236 Item NO.553]

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Labour charges for making gap connection with existing C.I pipe line including dewatering

586.00 if required and refilling the gap after completion of work. Each 1.00 1700.00 17.00

100mm Dia. (MR)

Providing and laying All socket C.I Bend ,C.I Tee and other all C.I Special (medium

589.00 class ) of following nominal diameter. Quintal 1.00 1250.00 12.50

Upto 300 mm Dia. (MR)

Manufacture ,supply and delivery of cast iron Detachable joints (short & long) complete

with joint flanges duly drilled ,synthetic rubber sealing rings manufactured from styrene

butadine rubber (SBR) and other required accessories such as nut ,bolts etc.conforming to

IS specification 8794-1988 or its latest revision if any suitable for use with A.C Pressure

pipes.Delivery of joints including its accessories including loading ,unloading,carting

,stacking,insurance ,all taxes,octroi etc.complete.12.3 long coller without ISI mark 12.3 B

100 mm Dia. (MR)

labour charge for Repairing and servicing existing sluice valve incl. servicing or replacing

of various parts (including cost of greese ,glan string, bolts,rubber packing )as directed by

engineer incharge of following diameter.

100 mm Dia. (MR)

Providing checknut and spindal (gun metal ) including all taxes and loading and unloading

596.00 for existing sluice valve of following diameter. Nos. 1.00 4620.00 46.20

100 mm Dia. (MR)

Providing and laying 2 coats of fiber based compound with crack filling ability and crack

bridging ability (Asian Paint Smart Crack Seal or equivalent) for plaster cracks for both

interior and exterior wall surfaces including cleaning and remove all dirt and foreign

material from the wall and making the wall surface smooth finish, etc. complete as per

directed by Engineer In-Charge. The work shall be carried out as per technical

specification. The rate is inclusive of all material, labour charges, etc. (Rate Analysis)

Providing and Fixing Rubber Speed Breaker Size:500x400x75mm For Road Safety etc.

complete as directed by Engineer - in - Charge.

Providing and Fixing mosqiutoes S.S.net with alluminium Frame Section With Including

Fittings as per instruction engineer incharge.

Providing and fixing of 10 mm clear Acrylic cut work and fixing 3mm acrylic on top of

brand Ptglass,astari etc,3M vinyl with 5 years warranty on fading with all laser and cnc

602.00 work,including all material, labour,25 mm ss studs for mounting and other hardwares, Sq.Mtr 1.00 20000.00 200.00

waste of materials etc and complete the work satisfactorily as per instruction of architect

or Engineer-in charge.

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Providing and fixing of 10 mm clear Acrylic cut work and fixing 3mm acrylic on top of

brand Ptglass,astari etc,with all laser and cnc work,including all material, labour,25 mm ss

603.00 studs for mounting and other hardwares, waste of materials etc and complete the work Nos. 1.00 1650.00 16.50

satisfactorily as per instruction of architect or Engineer-in charge.( basic size of name plate

Providing and making of ply panelling on Wall & columns using 12mm ply, aluminium

pipe for (2" x 1") framing(minimum grid size of 600 mmx 600mm ), Ghana bidding patti

(11/2" x 3/4")including all material, labour and hardware complete,including scaffolding

as per instruction of architect. And Finished with different materials,polish work as per

instructions,and complete the work satisfactorily as per instruction of architect or Engineer-

Providing and fixing of full height glass partitions (AS PER DRAWINGS) using patch

fitting / U-channels, 12mm clear toughned glass,film work as per drawing including all

605.00 hardware items,silicon,etc with all material, labour,cutouts,edge polish , lead and wastage Sq.Mtr 1.00 2962.63 29.63

etc. and complete the work satisfactorily as per instruction of architect or Engineer-in

Providing and fixing of wooden ceiling using 12 mm ply of brand greenply ecotech

mr,century sainik mr,srg etc, aluminium channel & pipe(50 x 25 mm) for framing and

suspension, screws etc. including all vertical support and all vertical surfaces from

606.00 ceiling,necessary hardwares,75mm anchor fastners and complete with all material, making Sq.Mtr 1.00 2033.19 20.33

of coves and cutouts for ac grills ,labour & scaffolding with all lead, lift and transport. and

finished and complete the work satisfactorily as per instruction of architect or Engineer-in

Providing and fixing of cement ceiling using 10 mm cement sheet of brand T.P.I,SHERA

(single sides), etc. using aluminium framing of 25mm x 50mm x 1 mm in 600 x 600 mm

grid,and same pipe for vertical framing, including all hardware item, aluminium L clits,

607.00 mm powder coated self drilling screws,groove (if shown) with all material, 75 mm anchor Sq.Mtr 1.00 2262.31 22.62

fastners,making of coves for indirect lighting, grooves,cutting ,labour,SCAFFOLDING,

lead and wastage etc. complete. And Finished with satin finish wall color and complete the

work satisfactorily as per instruction of architect or Engineer-in charge

Providing and fitting of 6mm ply & 1mm laminate on both the side (as per drawing &

selection) on existing flush door and 25 mm to 75 mm tk teakwood beading patti for

liping,framing and with 300 mm width 5 mm glass with frosted film work as per selection,

and finishing it with laminate with 3mm x 3mm grooves if shown ,including all material,

labour and hardware,125 mm s.s 304 grade hinges,fissure screws with plugs , heavy duty

conceal door closer ( ENOX ITS-3870-EN 2-5), mortise door lock (ENOX EMH-SS-019)

with entire set including cylinder as selected,tower bolt,stopper,colour , REMOVING OF

OLD LAMINATE IF APPLIED and polish work as per instructions etc waste of materials,

and complete the work satisfactorily as per instruction of architect or Engineer-in

charge.[Basic Rate of Laminate : 2000rs./sheet (8' x 4')]

Providing and fixing of 12 mm tk toughned GLASS DOORS using Dorma BTS 75 V

Glass Door PKG EN 1-4 (Top Patch-1, Bottom patch-1, Floor Spring-1, Corner

Lock-1); Dorma Xl-C 4003 A Patch fitting for overpanel and sidelight; Dorma Xl-C

4004 A Connector for overpanel and Sidelight; Dorma Xl-C 4006 Central

Connector; Dorma Xl-C 4008 Side Connector; Dorma Xl-C 3000 H Type Handle

400x22 CTC 300 AND AS PER DRAWING including all acceessories,locks, material,

silicone,labour,installation, Hole & slote charges etc. and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.DOUBLE DOOR

SIZE (APRROX SIZE OF 2.17X2.45) WITH FIXED GLASS TOP

(APRROX SIZE OF 2.17 X 0.75 to 1.05)

GANDHINAGAR MUNICIPAL CORPORATION

Name of Appointment of Empanelment for civil work and fabrication work as and when Required In Gandhinagar Municipal

Work: Corporation area.

SCHEDULE B (With Rate)

Item No. Item Description Unit Qty. SOR 2024-25 1% LC Amount

Providing and fixing 12 mm tk of toughned GLASS DOORS using Dorma Xl-C

Glass Door PKG EN 3(Top Patch-1, Bottom patch-1, Floor Spring-1, Corner Lock-

1); Dorma Xl-C 4003 A Patch fitting for overpanel and sidelight; Dorma Xl-C

A Connector for overpanel and Sidelight; Dorma Xl-C 4006 Central Connector;

Dorma Xl-C 4008 Side Connector; Dorma Xl-C 3000 H Type Handle 400x22 CTC

300 , AND AS PER DRAWING including all acceessories, locks,material,

silicone,labour,installation, Hole & slote charges etc. and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.SINGLE DOOR

SIZE(APRROX SIZE OF 1.20X2.45) WITH FIXED GLASS TOP

(APRROX SIZE OF 1.20 X 0.75 to 1.05)

Providing and fixing of approved ac4 - ac5 quality laminated wooden floor(WITH V-

GROOVE) including all accessories, skirting profiles , reducer profiles, corner profiles

,vapour barrier/ hitlon ,material, labour,installation etc. guranteed for 20 years and class

heavy usage oin domestic area.and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.(Basic rate of wooden floor- 125 rs/sq.ft.)BRANDS:

PARADOR , QUICK STEP , KRONO ORIGNAL GERMANY.

Providing and fixing of approved quality engineered wooden floor as per selection

including herring bone pattern , including all accessories, skirting profiles , reducer

profiles, corner profiles, vapour barrier/ hitlon ,material, labour,installation etc. and natural

612.00 wooden flooring spects : semi- solid teak flooring with 8 layers UV lacquer finish wih Sq.mtr 1.00 8599.00 85.99

aluminium Oxude (A1203) Anti - scratch coating. and complete the work satisfactorily as

per instruction of architect or Engineer-in charge.(Basic rate of wooden floor-

rs/sq.ft.)BRANDS : SYMPHONY,KAARS,MIKASA.

Providing and Making of Storages using ply of brand of brand greenply ecotech

mr,century sainik mr,srg etc,(thickness as specified)/ sag wood and finished by 1 mm

Laminate outside as per selection of brand greenlam,merinolam,formica or 6mm HDF as

per drawing, 1mm tk laminate (inside),water pu polish (as shown), drawers, shelves etc.

613.00 with all hardware, nylon leveler foot rubber, handles,hinges, locks , magnet and other Sq.mtr 1.00 12477.41 124.77

acessories with all material, installation,labour, lead and wastage,polish work as per

instructions etc. and complete the work satisfactorily as per instruction of architect or

Engineer-in charge.(Basic rate of Inside Laminate : 18 rs./sq.ft. & Outside Laminate :

I/We am/are willing to carry out the work at ________% above/below percent (should be written in figures and words) of the estimated rate mentioned above. Amount of my / our tender works out as

Estimated amount put to tender Estimated amount put to tender

Deduct____% below Add____% Above

In words In words

1 All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.

2 All columns in the Schedule should be filled in ink and the total of the entire in the last columns should be struck by the

3 Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for work

4 To be continued on additional sheets, if found necessary.

5 The Labour Cess will be deducted as per prevailing rules i.e.1% of the work done.

6 GST is applicable seperatly for all type of works by the Client (Total Tender Cost is without GST).

7 The bituminous work shall be carried out by the contractor or as under by utilizing.

8 For abnormal high or law rates payment of such items shall be regulated as per Govt. Circular letter No. Parach-102008-61-S

9 From dt. 1-7-2017 GST is applicable hence Agency should quote price accoringly. Any dispute regarding this will not be

10 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

11 GST and Income tax TDS will be deducted at a source while making payments of bills.

12 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Signature of Contractor

The Deputy Commissioner

Gandhinagar Municipal Corporation (GMC),