CERTAIN REPAIRS TO JOINARY FLOORING ROOF TREATMENT SANITARY FITTINGS AND OTHER BR WORKS IN CERTAIN MD ACCN OF 7A AREA AT PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for 25mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggrigate as in floor /roof surface finishing the surface even and smooth w/o extra cement complete all as specified and directed.

Supply only glass dividing strips 38mm wide and 3mm thick

M & L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement complete all as specified and directed.

M & L for Forming construction joints 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

S & F joint free coloured Non-skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

S & F non-skid joint free ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but n exc 0.18 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surface like dado/ skirting etc including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

S & F Joint free Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendring in CM 1:4 complete all as specified and directed.

S & F chequered tiles rubber moulded decorative designed cement concrete tiles 25 mm thick size of tiles as approved set, jointed and pointed in neat cement slurry with grey cement and pigments in floor ove and including 15mm thick screed bed with cm 1:6 complete all as specified and directed.

Demoliton of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base or in foundation filling and mass concrete complete all as specified and as directed.

S & F rubber moulded decorative designed coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment laid over and including 40mm thick fine sand cousion including rolling /compacting the finished surface complete all as specified and directed.

M & L for PCC 1:2:4 type B1 as coping, bed block, Haunching/ benching of drains/coving/ sides of any type of tiles etc and similar work complete all as specified and directed.

Demolition of Precast concrete block walling built in cement mortar complete all as specified and directed.

M & L for precast cement concrete Block Masonary with soilid blocks type C1 1:3:6 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L for 15 mm thick cement plaster on fair faces of brick/block work or concrete surface on wall in CM 1:4 finished fair and even complete all as specified and directed.

M & L for 15mm thick cement plaster on fair faces of brick/block work or concrete surface on wall in CM 1:6 finished fair and even complete all as specified and directed.

M & L for 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection complete all as specified and directed

M & L for applying two coat of cement base paint on new plastered surfaces of wall including prepration of surface complete all as specified and directed.

M & L for applying two coats of oil bound distemper on newly plastered surfaces of wall including preparation on new surface and by applying Birla care putty to gett smooth surface complete all as specified and directed.

M & L for three coats of white wash on walls including preparation of new plastered surface and complete all as specified.

S & F in repairs 15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor including taking down complete all as specified and directed.

S & F in repairs 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor including taking down complete all as specified and directed.

S & F in repairs 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms )complete all as specified and directed.

S & F in repair 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down, high pressure, with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repair 15mm bore fency type CP Brass Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repair 15mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repair 20mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repair CP brass wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair CP brass central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repairs vitreous china hand wash basin white exclusive quality with pedestal size 550 x 400 mm including brackets, PVC waste pipe and waste coupling fixed complete all as specified and directed.

S & F in repairs 15mm bore dia pillar tap cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs 600mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S & F in repairs Brass chromium plated Tubular towel rail , 20mm dia, D type , 60cm long between falnges complete all as specified and directed.

S & F in repairs vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests including connection to trap, and to flushing pipe, anti syphonage pipe, etc complete making good to floors and complete all as specified and as directed.

S & F in repairs viterous China wash down water closet (pedestal pattern) complete, including toilet paper holder, seat cover health faucet jet spray (excluding flushing cistern and flushing pipe) complete all as specified and as directed.

S & F in repairs 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle complete all as specified and directed.

S & F in repairs 500 liters capacity triple layer rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including connections incl taking down of old complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and n exc. 2 Sqm each and refixing in same opening complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm eachwith shutters (W/o taking off shutters from the frame) and refixing in same opening complete all as specified and directed.

Taking down chowkats or frames n.exc. 1.5 Sqm each with shutters (W/o taking off shutters from the frame) and refixing in same opening complete all as specified and directed.

S & F 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary fixing lugs, hinges , lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6, C-0(using 12.5 mm stone aggregare) complete all as specified and directed.

S & F 1.25 mm thick Pressed steel frame size 105 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125 mm long-06 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6, type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.

S & F 2nd class hard wood 35 mm thick, plain framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged ), or of veneered particle board medium density, wood particle board with commercial face veneers all as specified and directed.

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F 30mm thick IInd class hard wood glazed skelton shutters open rebated and prepaired to recive glass,guage etc (W/o sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of sutters as specified in SSR part - I section - 8, clause 8.20 (a).

S & F factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PCV ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cementsuppling & fixing in the frame at sitecomplete all as specified and as directed.

S & F 150mm aluminium anodised barrel tower bolts of extruded section all as specified

S & F 125 mm extruded aluminum alloy handles, fabricated type anodised all as specified

S & F 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S & F 100 mm Butt hinges, medium weight, cold rolled mild steel complete all as specified

S & F mild steel barrel tower bolt of size 200mm stove enamalled black with bright bolt and fixed complete all as specified and directed.

S & F Mild steel sliding door bolt of size 300mm plate type stove enamelled black with bright not lessthan 12mm dia with and including minimum of 6 bolts and nuts four on plate and two on staples plat and fixed complete all as specified and directed.

S & F mild steel pressed handle oval type stove enamalled black size-150mm complete all as specified and directed.

S & F M.S. Framed work such as grills grating etc. with ends of bars sholdered and / or riveted into spikes, framed guard bars / railings all as directed.

S & F steel window with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed welded complete all as specified and directed.

S & F steel window with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed welded complete all as specified and directed.

S & F steel ventilators with top hung shutters incl. hinges, steel handle and steel peg stay complete with glazing sash, dovetailed or welded complete all as specified and directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed.

S & F in repairs Stasinless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed.

S & F in repair 28mm dia fancy type wooden finish MS dropery rod fixed with wooden finale stop, brackets etc to wall complete as sample approved all as specified and directed.

S & F for 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m including Hacking out old broken glass (any thickness, size, quality or description) from steel frames or fixed with beads complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square nexc. 0.5 sqm in each pane all as specified

S & F 3mm thick sheet glass ground or Obscured or frosted on one side and glazing with oil putty in square nexc. 0.5 sqm in each pane complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces complete all as specified and directed.

M & L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge/thickness in roof covering etc, complete all as specified and directed

S & F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 and fixed with `J' or `L' hooks including with washers as in roof covering, wall etc. complete all as specified and directed.

Ditto all as per above item No. 74 but except CGI Sheet complete all as specified and directed.

Dismantling timber scantling 40 sqcm and over in section, framed work, in any position complete all as specified and directed.

Dismantling timber scantling framed work in filletes, rails, posts, rafters, purlins etc under 40 sqcm in section complete all as specified and directed.

M & L for Second class hard-wood in scantlings clean sawn framed and fixed complete all as specified and as directed

M & L for second class hardwood, Plain fillets, square, rectangular or triangular in section, exc 6 sqcm but n.exc 13 sqcm, clean sawn, secured with mills or brads, complete all as specified and as directed.

S & F in repairs 4mm thick Asbestos cement plain building boards, fixed in ceiling to timber framework with screws complete all as speciifed and as directed.

M & L for 14mm to 16mm thick baroda green stone slab toping table rubbed and mirror polished over and inlcuding15mm thick screed bed or bedding layer (1:4) and jointed with white cement slurry mixed pigment to match the colour incl rounded / half rounded edge as in steps, jambs, pillars, window-cills, cooking platforms and like with a hole for gas pipe in cooking platform etc complete all as speciifed and as directed.

S & F in repairs Stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Taking down eaves gutters and rain water pipes ( any size or pattern) incl all fittings , shoes, bends, swan neck etc. complete all as speciifed and as directed.

S & F 110mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F 75 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl PVC holding clamps complete all as directed.

S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl PVC holding clamps complete all as directed.

S & F in repair 110 mm bore PVC (SWR) bends any radius

S & F in repair 75 mm bore PVC (SWR) bends any radius

S & F in repair 110 mm bore PVC (SWR) junction single (Single T) equal or unequal

S & F in repair 75 mm bore PVC (SWR) junction single (Single T) equal or unequal

S & F in repair 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S & F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed

S & F in repair for CP health faucet (hand shower) with 1.5 m long , SS flexible tube and wall hook complete all as specified and directed

S & F in repairs PVC waste pipe of dia 32 mm and minimum length 600mm suitable for WHB complete all as specified and as directed

S & F in repairs SS Jet spray with flexible pvc pipe 15mm dia not less than 1.50 mtr long complete all as specified and directed.

S & F in repair CP shower rose of size 125 mm complete all as specified and directed.

S & F in repairs Bib tap standard or PTMT 15mm dia any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms) complete all as specified and directed.

M & L for cement concrete padding of 1:2:4 using 12.5mm graded stone aggregates, 25mm thick in sunken of bath / toilet / WC/ roof slabs etc with adding water proofing compound as per manufacturer's instruction complete all as specified and directed. Note: Cost of WPC shall be deemed to inclusive in quoted unit rate.

S & F in repair 40mm dia light garde GI Pipe soput in wall, floors complete all as specified and directed.

M & L for cement concrete 1:7:12 Type F-2 using 40mm graded stone/brick aggregate as in foundation filling, mass concrete or sunkun etc complete all as specified and directed.

M & L for sunken treatment of of bath / toilet / WC etc by cleaning and removing all the loose mortar, laitance, dirt, dust etc by chisel hammer wire brush and fixing APP modified polymer membrane (weight not less than 3 kg/sqm) over a coat of bitumen not below 1.2 Kg per Sqm as primer over a coat of bitumen not below than 0.3Kg per Sqm over 15mm thick plaster in CM 1:3 with Dr fixit pidilite liquid water proofing solution 200ml per 50Kg of cement at both horizontal and vertical surface complete all as specified and directed.

lohani hardware