PULIYERITHAZHE ANAGANAVADI ORAVIL ANGANAVADI RENOVATION IN ULLIYERI GP -PROJECT NO. 306

Amount

BUILDING RENOVATION WORKS

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

10.16.3:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD347244/2024-2025:Providing and fixing 0.35 mm GI trafford powder coated sheet (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

OD347250/2024-2025:Supplying and fixing square PVC gutter 160mm size. with MS Flats 25mm x 5mm size @ 40cm c/c fixing on Roof Members(Purlins or Rafter), bolts, nuts and washers etc., including making necessary connections with rain water pipes complete

OD347243/2024-2025:Providing and laying factory made chamfered edge cement concrete paver blocks in footpath , parks , lawns , drive ways , or light traffic parking etc of required strength , thickness , and size /shape made by table vibratory method using PU mould laid in required colour and pattern over 50mm thick compacted bed of 6mm metal , compacting and proper embedding/ laying of interlocking paver blocks into the metal bedding layer through vibratory compaction by using plate vibrator , filling the joints and cutting of paver blocks as per required size and pattern , finishing and sweeping extra sand complete all as per direction of engineer-in-charge 60mm thick cc paver block of M-30 grade with approved color design and pattern (16.91.2 modified) 60mm thick of CC paver block of M30 grade with approved colour , design and pattern.

PRAKASAN (BID ID -2054118)

Bidder Name

VK SAJU

PRAKASAN