REPAIR AND PAINTING TO VARIOUS STEEL FURNITURE AT AF STATION JAMNAGAR UNDER GE (AF) JAMNAGAR No 1

Amount

Removing the following old and unserviceable parts / components of “ALMIRAH LARGE / MED / SMALL STEEL ” and S&F new parts / components of same size, existing pattern and same material, with appropriate welding or screw & painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1031 & 1032)

MS lock 6 levers best quality with brass levers & duplicate key (Make:- Harrison/Samrat/Lico)

Mild steel chromium plated handle 125 mm size. Make : link/Lico/MK/Man

Three way locking assembly with iron plate and two rods 10 mm dia and lock cover as per drawing.

Leg made out of 1.00 mm thick mild steel sheet size as per drawing.

Removing the existing Unserviceable plywood from Bed Hard Steel & supply and fix 12 mm thick BWR plywood, ISI marked of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6/ Map / 08 (R)

Removing the existing Unserviceable pre-laminted particle board from head rest of Bed Hard Steel, and S & F 18/19 mm pre laminated particle board of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6/ MAP/08 (R))

Removing the existing Unserviceable pre-laminted particle board from foot rest of Bed Hard Steel, and S & F 18/19 mm pre- laminated patical board of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6/ MAP / 08 (R))

Removing following old and unserviceable parts / components of “TEAPOY VARANDAH” and S&F new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-255)

Removing old unserviceable tops from teapoy verandah and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Leg fabricated with 20 mm dia mild steel conduit pipe of wall thickness 1.6 mm including bending in 'U' shape.

Conversion of Charpoy GI Pipe Nylon Newar to Charpoy GI Pipe Plywood top by removing nylon Newar and S&F of 12mm thick ply, ISI mark, BWR Grade as per IS 303 of size 1980mm X 900mm by fixing with 10Nos nut and bolt of suitable size with GI washer along with provision of 25mm x 3mm Flat iron stiffner 02 Nos at the ends to be welded with the top of long rail as directed by GE.The Flat Iron shall be painted with two coats of synthetic enamel black paint over a coat of red oxide primer.(FD-220) Make of Ply : Kitply / Centuryply / Archidply

Removing of damaged/broken long rail from charpoy GI pipe and S&F new long rail made out of GI pipe 32mm bore (ISI marked) medium grade including threading both sides all as specified in drg & directed by Engr-in-charge. (FD-220) Make: Jindal/Tata

Removing of old damaged / broken long rail from charpoy and making of short rail from unserviceable long rail retreived from ser No.4.01 above incl threading & fixing in charpoy GI pipe all as specified in drg & directed by Engr-in-charge.

Removing of old damaged / broken short rail from charpoy and making leg from u/s short rail retreived from ser No.4.02 above incl threading, S&F 3mm thick MS plate in bottom to be welded with legs & fixing in charpoy GI pipe all as specified in drg & directed by Engr-in-charge.

Removing old broken / damaged GI elbow and S&F new GI elbow 3way 32mm bore (ISI marked) to charpoy GI pipe all as specified in drg & directed by Engr-in-charge.(FD-220)

Removing old and unserviceable parts / components of CHARPOY IP HARD TOP" and S&F in replacement plywood BWR grade ISI marked 12mm thick to the top of the charpoy with suitable nuts,bolts & washers complete all as specified in drawing and directed by Engr-in-charge. Drg No.(FD/MAP-II/01)

M&L for re-canning of chair verandah using 4 mm wide half round plastic cane of pale cream / white colour of superior quality in mat design including removal of old plastic cane and including preparation of old painted surface of chair frame and applying two coats white synthetic enamel paint all as specified and shown in Drg and as directed by Engr-in-Charge. (Drg No FD - 256)

Supply and fix in repair hard rubber shoe to chair verandah / chair verandah steel.

Removing old and unserviceable parts/components of "CHAIR TUBULAR OFFICE STEEL WITH/WITHOUT ARMS" and S&F new parts / components of same size, existing pattern and with appropriate welding or screw, painting to match with existing complete all as shwon on drawing & as directed by Engineer-in- Charge. (Drg No FD-75(M)

Second class HW seat frame including black enamel painting and woven with 2.00 to 2.5mm wide white / pale cream plastic cane as per GODREJ pattern complete.

Second class HW back frame including black enamel painting and woven with 2.00 to 2.5mm wide white / pale cream plastic cane as per GODREJ pattern complete.

Second class HW hand rest including black enamel painting.

Rubber shoe with suitable screws.

Removing following old and unserviceable parts / components of “TABLE OFFICE CLERK STEEL” and S&F new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1004)

Removing old unserviceable tops from table office clk steel and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Removing of unserviceable / broken / Damaged / Rusted drawers from existing table office clk steel and S&F new drawers made out 1mm thick MS sheet all as specified in drg & directed by Eng-in-charge.

M&L for removal of existing unserviceable lock of any description in any position, S& F new lock (brass) 6levers (Make:Voltas/Bajarang/lico) with duplicate key including fixing with suitable machine screws complete all as specified and directed by Engineer-in-charge.

Replacement of rubber shoe with S &F new hard rubber shoe of superior quality completed as approved and all as shown on drawings.

Removing following old and unserviceable parts / components of “TABLE OFFICE OFFICER STEEL” and S&F new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1003)

All as per item No 8.01 above but top of Table Office Offr steel

All as per item No 8.02 above but drawers of Table Office Offr steel

All as per item No 8.03 above but lock of Table Office Offr steel

All as per item No 8.04 above but rubber shoe of Table Office Offr steel

Removing following old and unserviceable parts / components of “VARIOUS TYPES OF CHAIR REVOLVING” and S&F new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No -TP/ Godrej / Durian / HOF etc )

Removing the existing old foam & tapestry of seat and S &F new 40 density foam cushion 75 mm with tapestry as approved By GE .

All as per item No 10.01 above but Back of chair revolving.

All as per item No 10.01 above but Arm of chair revolving.

Removing the existing old unserviceable castor wheel and S&F new caster wheel.

Replacement of lever system (hydraulic) for adjustment of height including all necessary fitting etc.

Replacement of complete plate base stand assembly including all necessary fitting etc.

Removing following old and unserviceable parts / components of “CHAIR WRITING ” and S&F new parts / components of same size, existing pattern and same material, with screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No -FD/E6/MAP/12&TP)

Removing the existing old foam & tapestry of seat and S&F new 40 density foam cushion 50 mm with tapestry as approved By GE .

All as per item No 11.01 above but Back of chair writing.

Arm rest made up of polyurethane with 75-85 shore 'A' hardness.

Removing the existing rubber stopper and S&F new rubber stopper.

Removing following old and unserviceable parts / components of “LOCKER BED SIDE STEEL” and S&F new parts / components of same size, existing pattern with welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1029)

M&L for removal of existing unserviceable handle, S&F new chromium plated handle 100mm long including fixing with suitable nut/pins as specified and directed by Eng-in-charge.

M&L for continous gas welding at damaged portions/joints all as specified and directed by Eng-in-charge (each joint to be measured separately)

Removing the following old and unserviceable parts / components of “Chair School with Hand Board” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, nut, bolt, & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6 / MAP / 05)

Supply and fix in repairs PVC Seat & back one piece of chair school with hand board. (Drg No.FD/E6/MAP/05) Make:- Blowplast / Supreme / Cello / National, Amko)

Removing old unserviceable tops from Chair school with hand board and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Removing unserviceable Hard rubber shoe and S & F new same size.

Removing following old and unserviceable parts / components of “TABLE 3X3 STEEL” and S&F new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1009)

Removing old unserviceable tops from Table 3X3 steel and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Leg fabricated with 25 mm size steel square tube with 1.6 mm wall thickness.

Removing following old and unserviceable parts / components of “RACK SHOE STEEL” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, nut, bolt, & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/ 02/R)

Creedal (shelves) made of 25 mm conduit pipe & 3 mm MS wire mesh

Removing following old and unserviceable parts / components of “Table Computer” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, nut, bolt etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/03)

Removing old unserviceable tops from Table computer and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Drawer made out of 18 mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around as per manufacturer's instructions and other side French polishing with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge.

Pull out tray for mouse made all as per item No 16.02

Pull out tray for keyboard made all as per item No 16.02

Removing following old and unserviceable parts/components of "TABLE BED SIDE" and S&F new parts / components of same size, existing pattern and same texture, with necessary beading , screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-Charge (Drg No FD/E6/MAP/15(R) )

Back of 6mm thick commercial face plywood.

Side (right & left) made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) PVC edging fixed to frame 25mm projection on all three sides all as specified in drg as directed by Engineer-in-Charge.

Completed drawer made out of 12mm thick plywood of size and specification as per drawing.

M&L for spot welding of steel items of broken joints etc not exceeding 2.5 cm in length and thickness of weld 6mm, inlcuding scraping preparing surface of welded portion by grinding and buffing to match with existing.

M & L for Preparation of old painted surfaces of the following steel furniture article including removal of dent etc to get the surfaces smooth by applying of putty wherever necessary, and Painting with one coat of synthetic enamel paint with spray gun as per existing colour and all as specified and directed by Engr-In-Charge.

Almirah med steel (Drg No - FD 243 /1032)

Almirah large steel (Drg No - FD 67/1031)

Book case steel 1675 x 840 x 305 (Drg No - FD-1028)

Book Shelf Open Small Steel (Drg No - FD-69 M)

Chair writing (Drg No - FD/E6/MAP/12)

Rack 6 tier steel (Drg No - FD-1038)

Rack Shoe Steel (Drg No - FD E6 MAP 02)

Table office officers steel (Drg No - FD 84 M,1003)

Table office clerk steel (Drg No - FD 84 M,1004)

Table 900 x 600 x 760 (Drg No - FD 1007)

Table with drawer steel frame 900 x 600 x 760 mm (Drg No - FD 1008)

Table 900 x 900 x 760 Steel (Drg No - FD-1009)

Teapoy verandah (Drg No - FD 35 / 255 / 383)

Bed hard steel (Drg No - FD / E6 / MAP / 8 (R))

Charpoy IP with hard top (Drg No - FD / MAP- II /01)

Chair School Hand Board Drg No FD / E6 / MAP / 05

Locker Bed Side” (Drg No / FD - 1029)

Chair varandah Steel FD- 256

M/S Badri Electicals

S t modi

PRAFUL ENTERPRISES

M/S Super Steel Works

SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD

Bidder Name

SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD