Maintenance servicing repair of 5HP 0.6 cusec 5HP 0.75 cusec 8HP 1.0 cusec and 16.5HP 1.2 cusec diesel driven dewatering pump sets at ware house DW station Jammu.

Schedule maintenance/servicing/repair to 2 Nos. 5HP/0.6 cusec diesel engine driven dewatering Mud Pump sets (no 18 & 19) by way of decoupling pumps from engines, dismantling the engine parts like head, valves, rocker assemblies, fuel pumps etc of each engine. Removing/cleaning of carbon deposits with recommended chemicals of each engine. Servicing by way of cleaning of ring sets, head gaskets, inlet and exhaust valves & guides of each engine. Adjustment to rocker and tappet assembly of each engine. Job also includes complete servicing and calibration of fuel pumps by dismantling and then cleaning of injector nozzles, plungers, springs, delivery valve, lock sets etc of each engine. Calibrating the fuel pumps on calibration bench. P/f of fuel filter, air filter, fuel pipes with banjo bolts to each engine. Draining of existing contaminated M-oil, cleaning the oil sump and then P/Filling of 3.5 ltr M-Oil for each engine. Idle testing the engines. The job involves repair to towing trolley of pumping set no-18 by way of dismantling the dewatering pump set from trolley, then shifting trolley to workshop for its repair by way of dismantling of rim along with tyres and replacing the old damaged bearings of axle by cutting and extracting it . Providing and fitting of new bearings of suitable capacity to both sides to bearing housing assembly of axel. Assembling of rim along with tyres to trolley and shifting back. Job further includes servicing to 02 nos 0.6 Cusec Pump units (18 & 19) by way of complete dismantling of pumps by extracting the shafts, bearings, and impeller. Cleaning and greasing of all parts. Reassembling the pumps by P/F of new gasket, nuts bolts, gland packing & greasing the bearings properly. Refitting the serviced pumps . Placing of dewatering pump set on trolley and then proper fitting of the same Providing and fitting of new coupling pulley sets along with nuts and bolts to each pumping unit Job includes cost of material, fuel charges for testing , rebate on old parts ,labour & fitment charges at ware house D/W station Jammu. Inclusive of all taxes. Complete job.

Schedule maintenance/servicing/repair to 3 Nos. 5HP/0.75 cusec diesel engine driven dewatering Pump sets (no 1, 3, 6) by way of decoupling pumps from engines, dismantling the engine parts like head, valves, rocker assemblies, fuel pumps etc of each engines. Removing/cleaning of carbon deposits with recommended chemicals of each engines. Adjustment to rocker and tappet assemblies of each engines. Job also includes complete servicing and calibration of fuel pumps by dismantling and then cleaning of injector nozzles, plungers, springs, delivery valve, lock sets etc of each engines. Calibrating the fuel pumps of both the engines on calibration bench. P/f of fuel filter, air filter, fuel pipes with banjo bolts to each engine. Draining of existing contaminated M-oil, cleaning the oil sump and then P/Filling of 3.5 ltr M-Oil to each engines. Idle testing the engines. Job further includes servicing to 03 nos 0.75 Cusec Pump units (1,3& 6) by way of complete dismantling of pumps by extracting the shaft, bearings, and impeller of each pumps. Cleaning of all parts. Reassembling the pumps by P/F of new gaskets, nuts bolts, gland packings & greasing the bearings properly of each pumps. Refitting the serviced pumps. Providing and fitting of new coupling sets and coupling with respective engine. and coupling with respective engine. The job involves providing and fitting of reinforced flexible suction pipe 25 feet long of 3inch dia and canvas flexible delivery pipe dia 4 inch- 30 mtr. In length to pumping unit no 1. P/F of 3inch dia foot valves, nipples to pumping unit no.1. Complete Job includes cost of material, labour, rebate on old parts ,fuel charges for testing & fitment charges at ware house D/W station Jammu. Inclusive of all taxes. Complete job.

Schedule maintenance/servicing/repair to 02 nos 8HP Engines of Diesel driven Dewatering Pump sets (no.14 and 17) by way of dismantling engines Removing/cleaning of carbon deposits with recommended chemicals. servicing to head by way of cleaning, head , inlet and exhaust valves of each engines. Adjustment to rocker assemblies and tappets of each engines. Job also includes complete calibration of fuel pumps by dismantling and then cleaning of injector nozzles, plungers, springs, delivery valves, lock sets etc of both engines. Calibrating the fuel pump on calibration bench and fitting with engines. P/f of fuel filters, air filters, fuel pipes with banjo bolts to both the engines. Providing and filling of fresh M .oil- 4ltr after draining out the old contaminated M.oil to each engines and cleaning of oil sumps. Testing the engines idle. Job further includes servicing to 02 nos 1.0 Cusec Pump unit of 8HP Diesel driven dewatering Pumps (pump no 14 &.17) by way of decoupling it from the engines and then complete dismantling of pumps by extracting the shaft, bearings, and impeller of each pump. P/F of gland packet-1set, cotter-1nos to each pump sets. Reassembling the pumps by P/F of new gaskets, nuts bolts, gland packings & greasing the bearings properly. Refitting the repaired pumps. Providing and fitting of new coupling sets to each pumping unit and couplings with respective engines. The job further involves providing and fitting of canvas flexible delivery pipe 30 mtr long of 5 inch dia to pump set ( no-17). P/F of 3inch dia foot valves, nipples to both pumping sets. Complete Job includes cost of material, rebate on old parts, carriage, fuel charges for testing &labour. Inclusive of all taxes. Complete job.

Schedule maintenance/servicing/repair to 1 Nos. 16.5HP double cylindered/1.2 cusec diesel engine driven dewatering Pump set by way of decoupling pump from engine, dismantling the engine parts like head, valves, rocker assemblies, fuel pumps etc. Removing/cleaning of carbon deposits with recommended chemicals. Adjustment to rocker and tappet assembly. Job also includes complete servicing and calibration of fuel pump by dismantling and then cleaning of injector nozzles, plungers, springs, delivery valve, lock sets etc. Calibrating the pump on calibration bench. P/f of fuel filter, air filter, fuel pipes with banjo bolts to each engine. Draining of existing contaminated M-oil, cleaning the oil sump and then P/Filling of 8 ltr M-Oil to engine. Idle testing the engine. Job further includes greasing of 1.2 Cusec Pump unit by way of dismantling bearing bracket of pump and then checking properly. Reassembling the pump bracket P/F of new gasket, nuts and bolts, gland packing & greasing the bearing properly. Providing and fitting of new coupling sets and coupling pump with engine. The job further involves providing and fitting of canvas flexible delivery pipe 30 mtr long of 5 inch dia to pump set. P/F of 4inch dia foot valves, nipples to pumping set. Complete Job includes cost of material, labour, rebate on old parts, fuel charges for testing & fitment charges at ware house D/W station Jammu. Inclusive of all taxes. Complete job.