PROVISION OF ONE CLOSED SHED FOR ECHS MED STORE AT MH TRIVANDRUM AT PANGODE MIL STN UNDER GE (ARMY) TRIVANDRUM

Amount

Excavating in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation or for erection of poles, stays, laying cables, stays etc and getting out in hard/dense soil and in road cutting all as specified and as directed.

Removing excavated material/surplus soil to a distance not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meter above starting point all as specified and directed

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in hard/dense soil all as specified and directed

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for pre-cast solid block masonry made of cement concrete 1:3:6, type C1, using 20mm graded stone aggregate exceeding 10 cm in width and setting in CM 1:6 complete all as specified and as directed.

M&L for moorum red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread levelled and rammed including watering complete all as specified and as directed.

M&L for hardcore with broken stone or boulders of guage exceeding 63 mm not exceeding 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rolled / rammed to a true surface complete all as specified and as directed

M&L for 75 mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of flooring complete all as specified and as directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection etc complete all as specified and as directed.

M&L for 40 mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate finished even and smooth as in flooring etc., complete all as specified and as directed.

M&L for provision of glass dividing strips, 3mm thick and width of 38mm and fixing to floors complete all as specified and as directed.

Supply only water proofing compound all as specified and as directed.

M&L for mild steel TMT bars 10mm bar dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item No 13 above, but 5mm dia and over upto including 10mm dia as in stirup spacers and binders complete all as specified and as directed.

M&L for mild steel TMT bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for PCC 1:2:4 type B1, using 20mm graded stone aggregate as in DPC, copings and similar work mixed with water proofing compound including necessary form work etc complete all as specified and as directed. Note:- Supply only water proofing compund shall be measured and paid separatally.

M&L for RCC 1:2:4, type B1, using 20mm graded stone aggregate as in shelves, chajjas and similar works etc., complete all as specified and as directed.

M&L for RCC 1:2:4 type B1, using 20mm graded stone aggregate as in foundation, including rafts footing , plinth beams, base for columns etc., complete all as specified and as directed.

M&L for RCC 1:2:4 type B1, using 20mm graded stone aggregate as in as in columns, pillars, etc., complete all as specified and as directed.

M&L for RCC 1:2:4 type B1, using 20mm graded stone aggregate as in as in lintel beam and similar work etc., complete all as specified and as directed.

Form work to sides of concrete foundations, footings, bases of columns, raft, and raft beaams sides and soffits of foundation and plinth beams and similar work for flat fair finished surfaces complete all as specified and as directed.

Form work to sides of pillars, posts, struts, piers, columns and stanchions etc., complete all as specified and as directed.

Form work to sides and soffit of floor or roof beams, beam haunching, lintel, beam, shelves including supports overhangs etc., complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparation of newly plastered undecorated wall surfaces and applying two coats of oil bound distemper over a coat of chalk whitning complete all as specified and as directed.

M&L for preparation of newly plastered undecorated ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for 5mm thick rendering in cement mortar 1:4 mixed with water proofing compound over 10mm thick rendering in CM 1:6 on fair faces of concrete surfaces finished fair and smooth without using extra cement for external walls complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:6, finished fair and smooth without using extra cement on fair faces of concrete surfaces for internal walls complete all as specified and as directed

M&L for 5mm thick rendering in cement mortar 1:3 finished fair and smooth without using extra cement on fair faces of concrete surfaces in ceiling complete all as specified and as directed

M&L for cement concrete 1:3:6, type C1, using 20mm graded stone aggregates as in cills incliding weathering, slightly rouded or chamfered angles and throating complete all as specified and as directed

S&F mild steel roof trusses (framed), trussed, Purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces, cleats etc. confirming to Fe 410-W (gde-E-250) quality A complete all as specified and as directed

S&F mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates etc.confirming to Fe 410-W (gde-E-250) quality A. complete all as specified and as directed

S&F mild steel framed work such as girlls grating etc. with end of bars shoulderd and or riverted or forged into spikes; framed guard bars; framed balusters; walk ways; railing frame work of water tanks and similar work conforming to Fe. 290. Gde-E-165 complete all as specified and as directed

M&L for preparing new steel surfaces of any description, not otherwise described over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat red oxide primer complete all as specified and as directed

S&F GI sections as in wind tie of size 40 mm width and 3 mm thick for roof including securing bollts, all necessary drilling, bolting or riveting etc complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheeting, 0.50 mm thick, of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheeting, 0.50 mm thick, of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed.

M&L for 3 mm thick sheet glass ordinary quality in squares not exceeding 0.50 Sqm in each pane and glazing with oil putty, complete all as specified and directed

M&L for 2nd class hardwood, plain, framed, panelled shutters, 35mm thick, (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and as directed.

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of prink primer complete all as specified and as directed

M&L for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed.

M&L for pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed.

M&L for plain cement concrete, 1:2:4, type B-0 using 12.5mm graded stone aggregates as in filling of steel chowkats or frames, complete all as specified and as directed by Engr-in-charge.

S&F steel window with top hung shutter including hinges, steel peg stay, handles complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay handles complete all as specified and directed.

S&F non asbestos decorative type fibre cement building boards 4 mm thick fixed or laid/inserted to timber/GI/Aluminium frame work with screws on ceiling complete all as specified and as directed

M&L for anodised aluminium snap grid frame work for false ceiling size 605 x605 mm complete all as specified and as directed.

S&F plain mild steel wire 2.5mm dia galvanised class 3 in detached work sutch as for mosquto nets and fixing to straining bolts, hook eye, etc., complete all as specified and as directed

S&F 150mm long aluminum anodised, barrel tower bolts of extruded section and fixed of 150mm long complete all as specified and as directed

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised,150 mm long complete all as specified and as directed

M&L for point wiring complete for one light point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded, copper conductor in and including non-metalic PVC conduit totally concealed in wall with recessed, pressed steel terminal boxes not less than 1.2 mm thick concealed etc, including 3mm thick laminated sheet cover for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as specified and as directed. NOTE:- Cost of modular metal flush boxes concealed in wall with suitable white cover plate for mounting switch/sockets, regulator, bell push, light dimmer etc and Cost of cutting chases & making good to distrubed surface with cement mortar, if required any shall be deemed to be included in the quoted rate

All as per ser item No. 51 above but for One fan point controlled by one way switch and regulator complete all as specified and as directed.

All as per ser item No. 51 above but for one 5 Amps socket outlet on independent board complete all as specified and as directed.

All as per ser item No. 51 here in above but point wiring with 2.5 Sqmm FRLS cable and 2.5 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board complete all as specified and as directed.

S&F modular switch 1 way 6A, 240 volts, 1 module complete all as specified and as directed.

S&F modular switch 1 way 16A, 240 volts, 1 module complete all as specified and as directed.

S&F modular fan step regulator, 120 W - 2 module, 240 Volts, 50 Hz, suitable for ceiling fan 1200 mm/1400 mm sweep complete all as specified and as directed.

S&F ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified and as directed.

S&F modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type complete all as specified and as directed.

S&F modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type complete all as specified and as directed.

M&L for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 8 way, 240 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc, including taking down existing unserviceable one and removing from site complete all as directed.

Supply, fixing connecting and testing MCB SP 5 to 32 Amps, 240 volt, 10 KA, C curve, complete all as specified and directed

Supply, fixing connecting and testing MCB SPN 25 to 40 Amps, 240 volt, 10 KA, C curve, complete all as specified and directed

Supply and fixing sub main wiring with 2 runs of 4 sqmm single core, multi-stranded PVC insulated, unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, 20mm bore with conduit fittings and accessories concealed in wall/ceiling/floor including one run of 4 Sqmm multistranded PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete. NOTE: Two runs of 4.0 sqmm copper cable and one run of 4.0 sq mm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length

S&F surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver for and including 1 x 18/20 watt ultra bright LED polycarbonate tubelight 1200mm, 865-CRI 80, 6500K etc including prewired with 3 core flexible cables of size 24/0.2mm with copper conductor from connector to light fittings & connecting up complete all as specified and directed. NOTE: LED tube light and LED batten fittings should be two different items.

Supply, install and testing exhaust fan, Metal body 300mm sweep heavy duty, 240 volts, single phase, 900 RPM complete fixed to wall with suitable MS bolts, grouted to wall and connecting up including provision of MS louver, cable from connector to fan with 3 core flexible cable of size 24/0.2mm with copper conductor from ceiling rose to exhaust fan including writing MES No. of 2cm height with synthetic enamel black paint complete all as specified and directed. NOTE: LED tube light and LED batten fittings should be two different items.

Cutting holes into or through brick walls built in cement morter exceeding 400 sqcm not exceeding 0.10 sqmm superficial area and making good to faceing ie., wall surface with the existing specification in cement morter 1:3 to ends or edges or cement concrete 1:2:4 type B 1 for ventilating openings complete all as specified and directed.

S&F ceiling fan, 1200mm sweep with down rod, 240 volts, white colour, ISI marked, BEE 5 star rated including capacitor 2.5 mfd, PVC canopy, rubber bush, split pin, hanging clamp, hooks, holdfasteners etc and connecting up, cable from connector to fan with 3 core of size 0.5 sqmm (16/0.2mm) from ceiling rose to fan, provision of 3mm thick circular backlite sheet cover including writing MES No. of 2cm height with synthetic enamel black paint complete all as specified and directed.

M&L for sand filling around the cable with approved quality clean dry river sand unwashed for sand cushioning of Under ground cable including spreading, levelling, watering, punning down to desired thickness complete all as specified and directed Note: Punned thickness only will be considered or payment

Supply and laying in trenches burnt clay bricks, sub class 'B' (Designation 75) of old size for cable protection over the cables complete all as specified and as directed

Supply & laying in trenches/ drawn through pipes or in road crossing/paths/drains/ducts/floors/along poles/equipments etc., of XLPE insulated, armoured with multistranded aluminium conductor cable conforming to IS-7098 Part-I (1998), heavy duty (LT UG cable) conforming to IS-1554, 1100 Volts grade of size 16 sqmm 2 core nominal cross sectional area including necessary double compression copper gland and connecting up using suitable size aluminium lugs testing and commissioning complete all as specified and directed NOTE: Excavation, earthwork, sand cushioning, brick protection & cable protection etc. will be measured and paid separately under relevant items of this schedule.

S&F double compression copper gland for fixing armoured cables of size 16 sqmm 2 core nominal cross sectional area complete all as specified and as directed.

Supply & laying GI steel tubing, light grade 40mm bore for protection of cable on poles, under road crossing etc, complete all as directed.

M&L in repair/replacement for earthing complete with galvanised iron mild steel earth plate electrode 60 cm x 60 cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below normal ground level, connected to glavanised earth lead of GI wire of size 4mm dia by means of GI Bolts, Nuts, check nuts and washers of the earth and thimbles and other end of the earth strip connected to earthing test point and protected by galvanised iron pipe light grade 40mm dia from earth plate to panel and DG set and water pipe 20mm dia GI medium grade raised upto a level of 50cm above ground level with plug at top, earthing pit in PCC (1:3:6) type C-1 RCC pre-cast (1:2:4 type B-1) cover slab of 50 mm thick using 8.00mm dia CTD bars reinforcement both ways at 140 mm centre to centre with handle, 20 mm dia GI pipe medium grade for watering pipe, wire mesh, funnel and providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/loose soil, returning, refilling and removing of surplus soil to a distance not exceeding 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed.

R.K. Builders