Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 LAccepted-AOC | L1 | Accepted-AOC LOW | |
| 2 | L2₹3.1 L+₹14,684.02 (5.00%)Rejected-Finance | L2 | Rejected-Finance HIGH |
| Sl No | Description | Qty | Unit | NISSAR BASHEER L2 | Kunnathusseril L1 |
|---|---|---|---|---|---|
| 1.00Improvements to Anganwadi | |||||
| 1.00 | 50.12.2.2:Providing & fixing Poly carbonate multi wall plain sheet 4 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal / vertical / curved surfaces, but excluding the cost of purlins, rafters, trusses and including cutting to size and shapes where ever required. | 43.65 | sqm | 803.63 ₹35,078.45 | 765.36 ₹33,407.96 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 157.88 | kg | 196.4 ₹31,007.83 | 187.05 ₹29,531.64 Lowest |
| 1.00 | OD131413/2025-2026:Supplying and fixing Ferro cement slab 25mm thick for shelf and fixing in position, finishing
edges and all other labour charges, conveyance charges etc. complete | 15.27 | sqm | 1,343.07 ₹20,505.99 | 1,279.11 ₹19,529.45 Lowest |
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 14.94 | kg | 613.95 ₹9,169.96 | 584.7 ₹8,733.08 Lowest |
| 1.00 | OD139280/2025-2026:Providing and fixing Hylum sheet in panelling fixed in aluminium doors, windows shutters and
partition frames with C.P Brass/ stainless steel screws etc. complete as per architechtural drawings and directions of Engineer-in-Charge | 5.8 | sqm | 1,050.09 ₹6,090.52 | 1,000.19 ₹5,801.1 Lowest |
| 1.01 | 16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | 110.52 | sqm | 1,252.22 ₹1,38,392.85 | 1,192.59 ₹1,31,802.66 Lowest |
| 1.01 | 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 1,000 | Litre | 12.76 ₹12,760 | 12.15 ₹12,150 Lowest |
| 1.01 | 50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall | 50 | metre | 323.76 ₹16,188 | 308.34 ₹15,417 Lowest |
| 1.01 | 50.18.9.15.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6 Kgf/cm2 - External work - Exposed on wall | 15 | metre | 447.01 ₹6,705.15 | 425.82 ₹6,387.3 Lowest |
Tender Value
₹2.9 L
EMD Value
₹7,342
Closing Date
31 Jul 2025, 12:00 pmClosed
Mansoor T A
Office of the Assistant Engineer, LIDEW Section, Vannappuram Grama Panchayat
VANNAPPURAM GP 2025-26 Improvements to Anganwadi No 133 ward 16-VPM PRNO159/2025-26
2025_LSGD_777115_34
02/AE/LIDEW/VPM/2025-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
Vannappuram gp
Please refer Tender documents.
7 documents required · 7 mandatory
₹650
Yes
₹7,342
Yes
30 Aug 2025
22 Jul 2025
1 Aug 2025
22 Jul 2025
31 Jul 2025
22 Jul 2025
Amount
Improvements to Anganwadi
50.12.2.2:Providing & fixing Poly carbonate multi wall plain sheet 4 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal / vertical / curved surfaces, but excluding the cost of purlins, rafters, trusses and including cutting to size and shapes where ever required.
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD131413/2025-2026:Supplying and fixing Ferro cement slab 25mm thick for shelf and fixing in position, finishing edges and all other labour charges, conveyance charges etc. complete
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
OD139280/2025-2026:Providing and fixing Hylum sheet in panelling fixed in aluminium doors, windows shutters and partition frames with C.P Brass/ stainless steel screws etc. complete as per architechtural drawings and directions of Engineer-in-Charge
16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall
50.18.9.15.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6 Kgf/cm2 - External work - Exposed on wall
10.25.1:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete
NISSAR BASHEER (BID ID -2268748)
Bidder Name
Kunnathusseril
NISSAR BASHEER
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1272426.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .