Special repair of CHC at Ladwa in Distt. Kurukshetra (Pdg. Internal EI Only).

Amount

1 :- CEILING FAN/ EXHAUST FAN Supply, erection, testing of Ceiling fans IS marked (as per IS code 374)with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge 48" (1200mm) HSR 20.71.1

2 :- Supplying, errection, testing of Exhaust fan (as per IS code 374) having a capacity of 45 cubic metre per minute complete with suitable G.I sheetducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge. HSR 20.72

3 :- COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe. Group B HSR 23.1.1.2

4 :- Wiring in MS conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin socket and 1 no 5/6 Amp switch required MS Box etc complete as required Group B HSR 23.1.4.2

5 :- Wiring in MS conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch required MS Box etc complete as required Group B HSR 23.1.5.2

6 :- Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm) HSR 23.1.6.1

:- 1 run of Size 2.50 Sqmm(1.1.80mm) HSR 23.1.6.2

:- 1 run of Size 4 Sqmm(1/2.24mm) HSR 23.1.6.3

:- 1 run of Size 10 Sqmm(1/3.50 mm) HSR 23.1.6.5

7 :- COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS Wiring only in 1.5 sqmm PVC insulated copper conductor cable for LIGHT/FAN/Call bell point in existing conduit pipe and MS boxes including cost of Bakelite cover for MS box, switch, wall socket, ceiling rose/connector etc. Group B HSR 23.5.1.2

8 :- Wiring only in existing conduit and MS box for Twin control light point with 2 nos , 2-ways, 5 amp. switch in 1.5 sqmm FRLS PVC insulated copper conductor cable . Group B HSR 23.5.2.2

9 :- Wiring in existing conduit and MS box for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin socket and 1 no 5/6 Amp switch etc complete as required Group B HSR 23.5.4.2

10 :- Wiring in existing conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch etc complete as required Group B HSR 23.5.5.2

11 :- Supply and erection of MS conduit pipe 1.6 mm thick , ISI marked surface/recessed in slab/wall/ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. MS Pipe of 20 mm dia. HSR 23.6.6.1

:- MS pipe of 25 mm dia. HSR 23.6.6.2

12 :- Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. HSR 23.7.6.2

13 :- Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Switch 5 amp. on existing sheet. HSR 23.8.1.1

:- Wall socket 5 amp on existing sheet. HSR 23.8.1.2

:- 15 amp. switch on existing sheet. HSR 23.8.1.3

:- 6 pin 15 multi socket on existing sheet HSR 23.8.1.4

:- Call bell 220/230 volts musical type HSR 23.8.1.6

:- Bell push HSR 23.8.1.9

:- Bakelite angle/straight button holder large size. HSR 23.8.1.12

:- Socket size rotary step type Electronic regulator for A.C. ceiling fan HSR 23.8.1.13

14 :- Providing and fixing outdoor duty Ply of 8 mm thick frame suitable for exhaust fan up to 450 mm sweep etc complete as required HSR 23.12

15 :- Fixing of LED Tube light/ 2*2 ft square panel fitting directly on wall /ceiling or false ceiling including making connections etc as required HSR 23.2

:- Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. TRIPLE POLE MCCB 16 to 100 amp, 25 KA HSR 23.22.1.3

16 :- MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 125 A FP HSR 23.22.2.1

17 :- Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 8 way ( 2 incoming and 6 outgoing) HSR 23.22.4.2

:- TPN DB Horizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing) HSR 23.22.4.5

18 :- Supply and erection of miniature circuit Breaker/isolator 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole HSR 23.22.5.1

:- 6 amp. to 32 amp Double POLE HSR 23.22.5.3

19 :- MS STAND, BUS BAR CHAMBER AND PANELS Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide. HSR 23.24.1

:- Load Bank 8 way 250 A HSR 23.24.4.2

:- Load Bank 8 way 400 A HSR 23.24.4.4

21 :- EARTHING AND LIGHTENING ARRESTOR Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. HSR 24.1.1

:- Extra for using salt and char coal/coke for pipe earth electrode as required. HSR 24.1.2

:- Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. HSR 24.1.3

:- Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. HSR 24.1.5

:- Supply and erection of 20mm x 3mm thick GI, tape fixed with suitable G.I. stapples of same size. HSR 24.1.14

:- Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required. HSR 24.1.7

:- Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. HSR 24.1.8

22 :- Laying of underground cable in pipe /existing open/closed trench etc as required:- 16 Sq mm to 35 sqmm 2 to 4 Core HSR 24.2.4.2

:- 50 Sq mm to 150 sqmm 2 to 4 Core HSR 24.2.4.3

23 :- Supply and erection of suitable compression type brass cable glands for underground Cable :- 25 sqmm to 50 sqmm Cable 2 to 4 Core HSR 24.2.7.3

:- 70 sqmm to 95 sqmm Cable 3 to 3½ Core HSR 24.2.7.4

24 :- Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 40 mm dia HSR 24.4.7.2

:- S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 90/75 mm outer dia/inner dia HSR 24.5.2.4

25 :- WIRING SWITCHES AND ACCESSORIES MS CLAMPS HSR EL035

26 :- MS sheet HSR EL211

27 :- Supply of 25 Sqmm 4Core Cable, Grandlay make, PVC/XLPE insulated ( Heavy Duty) Electrical Cables for working voltage upto and including 1100 Volts to IS:1554 (PART-I) with Aluminium conductor-ISI marked Power Cable - Aluminium Conductor (Make : as per approved make list). HSR NS-1

28 :- Supply of 35 Sqmm 4Core Cable, Grandlay make, PVC/XLPE insulated ( Heavy Duty) Electrical Cables for working voltage upto and including 1100 Volts to IS:1554 (PART-I) with Aluminium conductor-ISI marked Power Cable - Aluminium Conductor (Make : as per approved make list). HSR NS-2

29 :- Supply of 95 Sqmm 3.5Core Cable, Grandlay make, PVC/XLPE insulated ( Heavy Duty) Electrical Cables for working voltage upto and including 1100 Volts to IS:1554 (PART-I) with Aluminium conductor-ISI marked Power Cable - Aluminium Conductor (Make : as per approved make list). HSR NS-3

30 :- Supply & Erection of MS box of size 8”×10”×4” (20cm×25cm) and 10cm deep made one of 1.6mm thick MS covered with 5mm thick bakelite sheet for fixing of 4no. socket and switch of 6amp. And one no. sock-et and switch Of 15 amp. Including fixing of one no. fuse unit and indicator of approved make. The MS box is recessed in wall including cost of necessary cement sand & mixture required to complete the job in all respect with cost of necessary labour charges for fixing the bakelite sheet and complete then job in all respect up to the entire Satisfaction of Engineer-in-charge of work. HSR NS-4

M/s Sania Power System

Choudhary Electricals