Renewal work of Bahraich Bhinga Sirsiya Chaudharideeh SH-96 Road in Km 5 to 12 Vidhan Sabha-Bahraich

Amount

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Including Bitumen VG-30

Providing and applying tack coat with bitumen VG-10 using pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. Including Bitumen VG-10

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects Including Bitumen VG-30

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2

Finishing walls with premium Acrylic Smooth exterior paint with silicone additives or required shade new work (Two or more coats applied @ 1-43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10sqm) (apex Ultima, weather coat all quard) Asian, berger. as per PWD SH No. 13.47.1

P/L of hot applied thermo plastic compound 2.5 mm thick including reflecto rising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass breads as per IRC 35.The finished surface to be level uniform & free from streaks and hole. in edges and center line.

Same as above in item but providing Repeated bars of yellow colour thermooplastic coupound in 5 mm thickness

Supply of fixing of Pavment makers (cat eyes) type of MP-4956-04 Avery denstion/3-M (USA make) sifting of usa plastic housing fitted with lightly pavment potting compound the housing shall contain matic two glass covered prismatic refelective face to efect incident light including all taxes.

M/S RAJ BAHADUR CONSTRUCTION PVT LTD.