Supply, Installation, Testing, and Commissioning of Furniture for JSW School of Public Policy, New Campus, IIM, Ahmedabad

Amount

LOOSE FURNITURE WORK

Providing and installing FLAP FOLDABLE STUDENT TABLE 1400W X 600D - Table top made up of 25mm thick MDF with 1mm thick laminate finish and 2 mm thick PVC edge bidding. Modesty made up of 18mm thick MDF with 1mm thick laminate finish and 0.8 mm thick PVC edge bidding Understructure made up of 2mm thick sheet metal fabricated support welded with 25 x 25 x 1.2 mm CRCA pipe. Suitable locking mechanism fixed for folding and locking. 2mm thick MS sheet fabricated with 50 x 1.2mm dia round CRCA Vertical pipe. All frame structure is powder coated in shade to thickness of 50 microns. 60 mm castors are used for movement of tables with locking facility. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Laminate and powder-coating shade to be approved before the final production of the furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and installing Motorized Height adjustable table in Faculty Offices TABLE, 1200W x 600D mm, 25 mm thick top with Anti-collision sensors and safety control. Table top made up of 25mm thick ply with 4mm thick decorative veneer as approved having rubio monocoat finish after necessary surface preparation. 4 position table height memory settings. 3 Stage Square Legs.Height Adjustment Range: 590 – 1250mm. Speed: 36 ± 2mm/sec.Max. Load: Static – 200KGS / Dynamic - 120KGS.Input Power: 100-240 V / 50-60 Hz / 350 W Noise Level: < 50 dB. All wood exposed surfaces in the furniture to be finished using rubio monocaot polish. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Veneer and powder-coating shade to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and fixing STUDENT TABLES (curved type for 120 seater classroom as per final layout drawing) of size 635W X 450D X 740H (The equivalent product if proposed should be installed and used at the site locations for a minimum period of 5 years, to ensure the product is market tested and necessary documents to support this proposal in form of Work Order, Detail Product Brochures, Performance Certificates etc should be furnished as a part of the tender submission) Providing and fixing of table - table top made up of BWR grade plywood with 1mm thick decorative laminate finish and solid seasoned valsadi teak wooden edge beading, modesty made up of mild steel perforated panel in front. Understructure made up of mild steel powder coated frame structure with provision for cable management. Shop drawings to be approved before execution. All wood exposed surfaces in the furniture to be finished using rubio monocaot polish. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Laminate Shade and Powdercoating shade to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and fixing STUDENT TABLE (FOR SF 60-SEATER CLASSROOM) of size 3490W X 450D X 740H (The equivalent product if proposed should be installed and used at the site locations for a minimum period of 5 years, to ensure the product is market tested and necessary documents to support this proposal in form of Work Order, Detail Product Brochures, Performance Certificates etc should be furnished as a part of the tender submission) Providing and fixing of table - table top made up of BWR grade plywood with 1mm thick decorative laminate finish and solid seasoned valsadi teak wooden edge beading, modesty made up of 4mm thick decorative natural veneer on BWR grade plywood panel in front. Understructure made up of mild steel powder coated frame structure with provision for cable management. structure.Shop drawings to be approved before execution. All wood exposed surfaces in the furniture to be finished using monocaot polish. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Laminate and Veneer to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and fixing FACULTY TABLE 2000W X 850D X 740H, (The equivalent product if proposed should be installed and used at the site locations for a minimum period of 5 years, to ensure the product is market tested and necessary documents to support this proposal in form of Work Order, Detail Product Brochures, Performance Certificates etc should be furnished as a part of the tender submission) - table top made up of BWR grade plywood with 4mm thick decorative veneer finish and solid seasoned valsadi teakwood framework, 4mm thick decorative veneer modesty in front and one side(ht. 510mm). Understructure made up of mild steel powder coated frame structure.Shop drawings to be approved before execution. All wood exposed surfaces in the furniture to be finished using rubio monocaot polish. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Veneer and powder-coating shade to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and fixing PROGRAM OFFICER'S TABLE 1370W X 685D X 740H Alongwith side table of size 1050W X 400D X 740H, (The equivalent product if proposed should be installed and used at the site locations for a minimum period of 5 years, to ensure the product is market tested and necessary documents to support this proposal in form of Work Order, Detail Product Brochures, Performance Certificates etc should be furnished as a part of the tender submission) Providing and fixing of table - table top made up of BWR grade plywood with 4mm thick decorative veneer finish and solid seasoned valsadi teakwood framework, 4mm thick decorative veneer on BWR Ply and solid valsadi teak wood frame modesty in front and one side(ht. 510mm). Understructure made up of mild steel powder coated frame structure. Side table comprising of a set of two drawers on the top and a set of two shutters beneath, and finished using veneer with monocoat polish. Shop drawings to be approved before execution. All wood exposed surfaces in the furniture to be finished using monocaot polish. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Veneer and powdercoating shade to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and Fixing WORKSTATION 4X4 1200W X 1200D X 740H (The equivalent product if proposed should be installed and used at the site locations for a minimum period of 5 years, to ensure the product is market tested and necessary documents to support this proposal in form of Work Order, Detail Product Brochures, Performance Certificates etc should be furnished as a part of the tender submission) Providing and fixing of WORKSTATION - table top made up of BWR grade plywood with 4mm thick decorative veneer finish and solid seasoned valsadi teakwood edge beading. Understructure made up of mild steel powder coated frame structure with provision for cable management. Both side soft board with jute fabric with solid valsadi teakwood lipping. All wood exposed surfaces in the furniture to be finished using rubio monocaot polish. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Laminate and Powdercoating Shade to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and fixing CIRCULAR TABLE 900 DIA (The equivalent product if proposed should be installed and used at the site locations for a minimum period of 5 years, to ensure the product is market tested and necessary documents to support this proposal in form of Work Order, Detail Product Brochures, Performance Certificates etc should be furnished as a part of the tender submission) Providing and fixing of table - table top made up of BWR grade plywood with 4mm thick decorative veneer finish and solid seasoned valsadi teak wood edge beading. Understructure made up of mild steel powder coated frame structure. All wood exposed surfaces in the furniture to be finished using monocaot polish. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Veneer type and powdercoating colour to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and fixing READING TABLE 4850L X 1200W X 750H for Library (The equivalent product if proposed should be installed and used at the site locations for a minimum period of 5 years, to ensure the product is market tested and necessary documents to support this proposal in form of Work Order, Detail Product Brochures, Performance Certificates etc should be furnished as a part of the tender submission) - table top made up of BWR grade plywood with 4mm thick decorative veneer finish and solid seasoned valsadi teakwood FRAMEWORK. Understructure made up of mild steel powder coated frame structure with provision for cable management. Both side soft board with jute fabric with solid valsadi teakwood lipping. All wood exposed surfaces in the furniture to be finished using rubio monocaot polish. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Veneer Type lot and Powdercoating Shade to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and installing 4200W X 1600D X 720H Seminar Room Table Providing and fixing of table - table top made up of wood veneer that is 25mm thick and Edgeband for wood veneer surfaces shall match top finish. Legs are made of extruded aluminium 2 mm thick and section of leg 90x90 mm with supported ms bracket. has Netbox axial comfort 4 gang (UNIVERSAL Version), Understructure is slate finish with provision for cable management. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Veneer Type lot and Powdercoating Shade to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and installing 4200W X 1100D X 720H Seminar Room Tables Providing and fixing of table - table top made up of wood veneer that is 25mm thick and Edgeband for wood veneer surfaces shall match top finish. Legs are made of extruded aluminium 2 mm thick and section of leg 90x90 mm with supported ms bracket. has Netbox axial comfort 4 gang (UNIVERSAL Version), Understructure is slate finish with provision for cable management. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Veneer Type lot and Powdercoating Shade to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and installing 3500W X 1100D X 720H Seminar Room Tables Providing and fixing of table - table top made up of wood veneer that is 25mm thick and Edgeband for wood veneer surfaces shall match top finish. Legs are made of extruded aluminium 2 mm thick and section of leg 90x90 mm with supported ms bracket. has Netbox axial comfort 4 gang (UNIVERSAL Version), Understructure is slate finish with provision for cable management. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Veneer Type lot and Powdercoating Shade to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and installing 2800W X 1100D X 720H Seminar Room Tables Providing and fixing of table - table top made up of wood veneer that is 25mm thick and Edgeband for wood veneer surfaces shall match top finish. Legs are made of extruded aluminium 2 mm thick and section of leg 90x90 mm with supported ms bracket. has Netbox axial comfort 4 gang (UNIVERSAL Version), Understructure is slate finish with provision for cable management. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Veneer Type lot and Powdercoating Shade to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and installing 2800W X 1100D X 720H (ELLIPTICAL TOP) Seminar Room Table Providing and fixing of table - table top made up of wood veneer that is 25mm thick and Edgeband for wood veneer surfaces shall match top finish. Legs are made of extruded aluminium 2 mm thick and section of leg 90x90 mm with supported ms bracket. has Netbox axial comfort 4 gang (UNIVERSAL Version), Understructure is slate finish with provision for cable management. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Veneer Type lot and Powdercoating Shade to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and installing FREE STEEL LEG RECTANGULAR HIGH TABLE 1600W X 800D X 1000H Providing and fixing of table - table top Made of 25mm thick E-1 grade high pressure laminated particle board finished with 2mm ABS edge banding. Laminate tops have 3 mm edge band on all sides. Steel legs are constructed of 2-1/2mm thick formed sheet steel welded to 3mm steel tubing. The height of Worktop should be 1000 mm from ground level. Angled table legs are of painted steel. Four plastic glides are fastened to the legs to help protect flooring. Steel leg table: 5/8" glide adjustment range. Understructure is slate finish with provision for cable management. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Laminate and Powdercoating Shade to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and installing STEEL LEG RECTANGULAR HIGH TABLE 1800W X 800D X 1000H, Providing and fixing of table - table top Made of 25mm thick E-1 grade high pressure laminated particle board finished with 2mm ABS edge banding. Laminate tops have 3 mm edge band on all sides. Steel legs are constructed of 2-1/2mm thick formed sheet steel welded to 3mm steel tubing. The height of Worktop should be 1000 mm from ground level. Angled table legs are of painted steel. Four plastic glides are fastened to the legs to help protect flooring. Steel leg table: 5/8" glide adjustment range. Understructure is slate finish with provision for cable management. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Laminate and Powdercoating Shade to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and installing STEELCASE make B FREE SEATING BEAM 1600W X 350D X 720H or equivalent Providing and fixing of table - Seating frame is made up of a formed 12mm thick plywood surface with threaded inserts attached to a rigid welded assembly of aluminum tubing with srews. Bottom cover is 3mm thick hard fiber board. Urethane foam, 15mm thick and 80 kg/m3 dense, adhered to the seat surface, A thin PET film is applied before upholstery. Each leg has a soft felt glide. Bench has four angled painted aluminum legs and two painted aluminum footrests, with at least 2.0mm thick powdered metal coating. Understructure is slate finish. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Upholstery Fabric and Powdercoating Shade to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and installing FREE SEATING BEAM 1800W X 350D X 720H Providing and fixing of table - Seating frame is made up of a formed 12mm thick plywood surface with threaded inserts attached to a rigid welded assembly of aluminum tubing with srews. Bottom cover is 3mm thick hard fiber board. Urethane foam, 15mm thick and 80 kg/m3 dense, adhered to the seat surface, A thin PET film is applied before upholstery. Each leg has a soft felt glide. Bench has four angled painted aluminum legs and two painted aluminum footrests, with at least 2.0mm thick powdered metal coating. Understructure is slate finish. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Upholstery Fabric and Powdercoating Shade to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and installing ROUND SHAPE TABLE 1600 dia. x 720h, Providing and fixing of table - table top made up of wood veneer that is 25mm thick and Edgeband for wood veneer surfaces shall match top finish. Legs are made of extruded aluminium 2 mm thick and section of leg 90x90 mm with supported ms bracket. has Netbox axial comfort 4 gang (UNIVERSAL Version), Understructure is slate finish with provision for cable management. Complete with installation at site location, as per layout provided. The furniture items will have to be provided only after the mockup approval from Project Architects/Engineer. Veneer Type lot and Powdercoating Shade to be approved before final production of furniture. NOTE: Refer Annex- V for approved makes and model number

Providing and installing High back Executive Revolving Chairs Featherlite/Steelcase/Herman-miller make chair certified by TUV for QMS- ISO 9001(Quality Management System), EMS -14001( Environmental Management System) and OHSAS – 18001( Occupational, Health Safety and system series) Has a plan for OHSAS 45001 Occupational Health & Safety Management System, it is the latest standard and intentionally incorporated to be compatible with the ISO 9001 (Quality) and ISO 14001(Environmental) management systems standards for easier integration of quality, environmental and occupational health & safety management systems. (Lean manufacturing or lean production,, is a systematic method for waste minimization ("Muda") within a manufacturing system without sacrificing productivity). The products are certified for BIFMA standards. (Business and Institutional Furniture Manufacturers Association (BIFMA). ANSI/BIFMA X5.1-2017- Tests - General-Purpose Office chairs. (ANSI) - American National Standard for Office Furnishings. NOTE: Refer Annex- V for approved makes and model number Specifications: • Castors : Twin Castors 50 mm dia complying to ANSI / BIFMA X 5.1 – 2017 standards. Casters material - PP. The axle pin is rust protected- Zinc pacified. The pin is designed to have push fit with lock ring. RoHS compliant casters.(RoHS stands for Restriction of Hazardous Substances.) • Base: The 660mm dia (26 inches) five pronged base is made out of Nylon 30% GF. Reinforced with bottom ribbing for additional buttress and strength. Tested prudently and rigorously as per ANSI/BIFMA X5.1-2017 General Purpose Office Chair Standards. The base shall be 690 mm pitch-centre diameter -760 mm with casters. MS ring is insert moulded for better grip in the swaged taper. The Nylon base is load tested as per the BIFMA standards- to approx 1134 Kg. Gas lift: Single swage Class 4 tested -ANSI BIFMA performance standards. The pneumatic height adjustment has an adjustment stroke of 95 -100 cm as per the seat height criteria. Designed with possibility to increase the seat height if required with Gas lift stroke- 120 -125 cm.

• Mechanism: Self Calibrate Mechanism: Distinctively and characteristically design multilock mechanism offering a very smooth and fluidic reclining motion with automatic tension adjustment feature. The main feature is the self weight capability which means that the mechanism automatically adjusts the resistance that the back offers depending upon the weight of the person sitting on the chair. The mechanism offers seat to back recline ratio of 3:7, optimal for good ergonomic back support. The multi lock mechanism is fabricated from CR Sheets, with CO2 welding process imparting uniform surface finish and tensile strength. The components are processed with high degree of precision and care so as to assemble with other parts in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out of Grade II material conforming to ISO Standards. The taper angle should match with the taper angle of the gas lift swaging- 26°, 16". The mechanism is designed with release levers for locking at various positions and adjustment of the seat height. It is equipped with 4 locking positions with back rest “Return Prevention” function. The design eliminates the need for manual tension adjustment. Arms: It will have two Way Adjustable Arms '2D' (Height & Swivel). Moulded with Material- Nylon with GF 30%. One way adjustable option is also be available. The height adjustment button – Delrin P 500. Arms Pad: Material- Polyurethane with 2 mm metal insert. PU armrest is made of black integral skin polyurethane with 50-70 shore 'A' hardness and reinforced with MS insert.

• Seat: Fabric Upholstery: Seat & Back are duly upholstered with approved fabric/mesh . Specially designed mesh with Global standards - IS 20 D- material- Polyester & Polyelastomer blend in a ratio of 54% & 46%. GSM- 340. Abrasion resistance – confirming to ISO 12945-2. Colour fastness confirming to AATCC 16:2004 standards – 4.5. Fabric : 100% polyester- 340-350 GSM grade.- Abrasion- > 50000 cycles confirming to ISO 12945-2. No flaming or progressive smouldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021(match), IS 15061-2002. Foam: Cushion with pre moulded foam of 50 - 55 density in the shape of plywood. Density -- 52 kg/m3, Hardness – 20-28 kgf at 50%- Ply wood: 12 mm thick 8-9 ply. fire retardant type exterior grade phenol formaldehyde bonded, hot pressed ply conforming to IS303. The ply wood is fitted with metal “T” nut to have metal to metal contact for the hardware used for fixing the mechanism, arms and the back. This technology ensures long and efficient and safe functioning of the chair without any shake and play in the long run. Back: The back is upholstered with PP strip by inserting into outer. Outer material – PPGF30%- injection moulded in 800 ton hydraulic machine. Higher tonnage of the machine ensures high pressure of injection which can withstand high loads. The Lumber support adjustable is made with PPGF 30%. Back : The back is offered in special mesh finish. Upholstered with IS20D - Black / Grey mesh. material- Polyester & Polyelastomer blend in a ratio of 57% & 43%. GSM- 340. Abrasion resistance – confirming to ISO 12945-2. Colour fastness confirming to ISO 105 standards – 4 to 5.

Providing and installing Medium back Executive Revolving Chairs chair certified by TUV for QMS- ISO 9001(Quality Management System), EMS -14001( Environmental Management System) and OHSAS – 18001( Occupational, Health Safety and system series) Has a plan for OHSAS 45001 Occupational Health & Safety Management System, it is the latest standard and intentionally incorporated to be compatible with the ISO 9001 (Quality) and ISO 14001(Environmental) management systems standards for easier integration of quality, environmental and occupational health & safety management systems. (Lean manufacturing or lean production,, is a systematic method for waste minimization ("Muda") within a manufacturing system without sacrificing productivity). The products are certified for BIFMA standards. (Business and Institutional Furniture Manufacturers Association (BIFMA). ANSI/BIFMA X5.1-2017- Tests - General-Purpose Office chairs. (ANSI) - American National Standard for Office Furnishings. NOTE: Refer Annex- V for approved makes and model number Specifications: • Castors : Twin Castors 50 mm dia complying to ANSI / BIFMA X 5.1 – 2017 standards. Casters material - PP. The axle pin is rust protected- Zinc pacified. The pin is designed to have push fit with lock ring. RoHS compliant casters.(RoHS stands for Restriction of Hazardous Substances.) • Base: The 660mm dia (26 inches) five pronged base is made out of Nylon 30% GF. Reinforced with bottom ribbing for additional buttress and strength. Tested prudently and rigorously as per ANSI/BIFMA X5.1-2017 General Purpose Office Chair Standards. The base shall be 690 mm pitch-centre diameter -760 mm with casters. MS ring is insert moulded for better grip in the swaged taper. The Nylon base is load tested as per the BIFMA standards- to approx 1134 Kg. Gas lift: Single swage Class 4 tested -ANSI BIFMA performance standards. The pneumatic height adjustment has an adjustment stroke of 95 -100 cm as per the seat height criteria. Designed with possibility to increase the seat height if required with Gas lift stroke- 120 -125 cm.

• Mechanism: Self Calibrate Mechanism: Distinctively and characteristically design multilock mechanism offering a very smooth and fluidic reclining motion with automatic tension adjustment feature. The main feature is the self weight capability which means that the mechanism automatically adjusts the resistance that the back offers depending upon the weight of the person sitting on the chair. The mechanism offers seat to back recline ratio of 3:7, optimal for good ergonomic back support. The multi lock mechanism is fabricated from CR Sheets, with CO2 welding process imparting uniform surface finish and tensile strength. The components are processed with high degree of precision and care so as to assemble with other parts in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out of Grade II material conforming to ISO Standards. The taper angle should match with the taper angle of the gas lift swaging- 26°, 16". The mechanism is designed with release levers for locking at various positions and adjustment of the seat height. It is equipped with 4 locking positions with back rest “Return Prevention” function. The design eliminates the need for manual tension adjustment. Arms: It will have two Way Adjustable Arms '2D' (Height & Swivel). Moulded with Material- Nylon with GF 30%. One way adjustable option is also be available. The height adjustment button – Delrin P 500. Arms Pad: Material- Polyurethane with 2 mm metal insert. PU armrest is made of black integral skin polyurethane with 50-70 shore 'A' hardness and reinforced with MS insert.

• Seat: Fabric Upholstery: Seat & Back are duly upholstered with approved fabric/mesh . Specially designed mesh with Global standards - IS 20 D- material- Polyester & Polyelastomer blend in a ratio of 54% & 46%. GSM- 340. Abrasion resistance – confirming to ISO 12945-2. Colour fastness confirming to AATCC 16:2004 standards – 4.5. Fabric : 100% polyester- 340-350 GSM grade.- Abrasion- > 50000 cycles confirming to ISO 12945-2. No flaming or progressive smouldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021(match), IS 15061-2002. Foam: Cushion with pre moulded foam of 50 - 55 density in the shape of plywood. Density -- 52 kg/m3, Hardness – 20-28 kgf at 50%- Ply wood: 12 mm thick 8-9 ply. fire retardant type exterior grade phenol formaldehyde bonded, hot pressed ply conforming to IS303. The ply wood is fitted with metal “T” nut to have metal to metal contact for the hardware used for fixing the mechanism, arms and the back. This technology ensures long and efficient and safe functioning of the chair without any shake and play in the long run. Back: The back is upholstered with PP strip by inserting into outer. Outer material – PPGF30%- injection moulded in 800 ton hydraulic machine. Higher tonnage of the machine ensures high pressure of injection which can withstand high loads. The Lumber support adjustable is made with PPGF 30%. Back : The back is offered in special mesh finish. Upholstered with IS20D - Black / Grey mesh. material- Polyester & Polyelastomer blend in a ratio of 57% & 43%. GSM- 340. Abrasion resistance – confirming to ISO 12945-2. Colour fastness confirming to ISO 105 standards – 4 to 5.

Providing and installing Chairs (without castors) Frame : The Frame will be made out of ERW tubes- 25 mm diameter with 2 mm thickness pipe conforming to IS – 4923. Frame is welded by Co2 welding process for uniform finish conforming to IS 816. The chair should have an option of fitting castors. The castors will be Twin Castors 50 mm dia complying to ANSI / BIFMA X 5.1 – 2017 standards. Castors material - PP.RoHS compliant castors.(RoHS stands for Restriction of Hazardous Substances.) The chair design should have the capability to fix Writing desk Surface finish : Frame is powder coated to provide an attractive finish. will be in the approved colour. The powder coating should undergoes 7 step rust resistance pre treatment process viz degreasing, pickling as per IS standard. After pre treatment process, the components are NANO coated and passified for better adhesion of paint as per IS 3618 - 2016. The pacified components are powder coated with epoxy polyester powder to the thickness of 50-60 microns as per IS 101 and oven baked at 180 degrees for getting the scratch resistance finish. Product undergoes the following testing process for durability and functionality, cross cut test for ensuring adhesion of powder coating as per IS standard, Salt spray test for ensuring the rust resistance. Powder coated products should be durable & reduce the risk of scratches, chipping, abrasions, corrosion, fading and other wear issues. Frame should also have the option in chrome finish coat thickness 10 to 12 microns. Seat & Back : Back is made of PPGF 25% moulded in 550 tonnage press. Seat depth - 475 mm and width 480mm. The Back width – 480 mm and height- 410 mm from seat. Seat: Fabric Upholstery: Seat is duly upholstered with approved fabric / White Rexene. The back should have the option of mesh AN-70 (black / White) and AN-75(grey). GSM for mesh will be 320. No flaming or progressive smouldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BSEN 1021 and IS 15061-2012 is optional. The seat profile is designed with water fall to provide necessary comfort in popliteal region. Fabric : 100% polyester - 340 GSM. Abrasion - > 50000 cycles. Foam : Cushion with pre moulded foam of 50 - 55 kg/m3 density in the shape of plywood. Hardness – 22 to 28 kgf at 50% deflection. Ply wood: 12 mm thick with 8 to 9 ply. With option of Fire retardant type exterior grade Urea formaldehyde bonded. It will be hot pressed ply - conforming to I S 303. The ply wood will be fitted with metal “T” nut to have metal to metal contact for the hardware used for fixing the mechanism, arms and the back. This technology should ensure long and efficient and safe functioning of the chair without any shake and play in the long run. Arms: It will be provided with U shaped fixed arms made of PP moulded in 300 tonnage press. It is fixed with PHS M8X25mm hardware. The hardware will be zinc passified for anti rusting. NOTE: Refer Annex- V for approved makes and model number

Providing and installing TDW make NSP TA/RA TABLE of overall size 5400 x 1650 x 750 mm or equivalent (The equivalent product if proposed should be installed and used at the site locations for a minimum period of 5 years, to ensure the product is market tested and necessary documents to support this proposal in form of Work Order, Detail Product Brochures, Performance Certificates etc should be furnished as a part of the tender submission) Demountable understructure and table base in 16 Gauge MS tubular sections and MS plate, finished with polyester powder coating. Table top, sides and fascia in Seasoned solid timber (Valsadi teak), BWR grade plywood and 4mm thick decorative natural teak veneer, finished with natural rubio monocoat oil finish. 3 nos. pre-cast RCC cylindrical casings of varying diameter. Provision for wire management from floor point to table top. Complete, including instalation at site location as per the final layout shared. NOTE: Refer Annex- V for approved makes and model number

Providing and installing Faculty Tables with podium for classrooms or equivalent (The equivalent product if proposed should be installed and used at the site locations for a minimum period of 5 years, to ensure the product is market tested and necessary documents to support this proposal in form of Work Order, Detail Product Brochures, Performance Certificates etc should be furnished as a part of the tender submission) Providing and fixing table with podium of overall size of 1800 x 700 x 750 mm. Table top with integrated podium, consisting of solid wood structural frame, BWR plywood panel and natural teak veneer, supported on dual motor, 3 stage, height adjustable base. Table base height adjustment from 640mm to 1290mm. Integrated podium top includes pull-out keyboard tray and provision for wire management and provision for embedding of WACOM touch display, POE switch and gooseneck microphone. Fixed modesty panel with solid wood frame, BWR ply and veneer, on front and two sides of table, integrated with fixed cabinet housing for 15U AV rack. Complete, including instalation at site location as per the final layout shared. All AV & IT equipment not be included in the costing for this item, only fixing and provisions for their installation to be considered as part of the scope NOTE: Refer Annex- V for approved makes and model number

Providing and installing EXPONENTS LECTERN OF OVERALLSIZE: 380 X 610 X 1065 mm for Forum Area. Providing and fixing Lectern with large shelf area for laptop or papers, integrated pencil stop, removable back panel, fliptop lid for access to power and data or cord storage, integrated wire management, optional power, data, and vga with audiolevel™ 2 certified, scs iaq gold certified, case and back panel: veneer, accent ribbon: veneer, 2 power/ 2 data/ 1 vga+audio, glides: nylon non-marring. Complete, including instalation at site location as per the final layout shared. NOTE: Refer Annex- V for approved makes and model number

MISCELLANEOUS WORK

Providing, Fixing, Programming and Commissioning of Three Modules Electrical Switch-board/Socket Concealed type Frames of Digital Dreams make by NCC Telecom for the Forum Area in GF, Recess Type (Frame is Flush to the surrounding stone cladding surface with uniform groove around the plate), as per the approved shop drawing submitted by the NCC telecom. Price to include providing and fixing necessary stone cladding material, civilwork, POP work, mounting framework, front frames. Complete. or the Switch socket. Complete for all heights and levels.

Providing, Fixing, Programming and Commissioning of Six Modules Electrical Switch-board/Socket Concealed type Frames of Digital Dreams make by NCC Telecom for the Forum Area in GF, Recess Type (Frame is Flush to the surrounding stone cladding surface with uniform groove around the plate), as per the approved shop drawing submitted by the NCC telecom. Price to include providing and fixing necessary stone cladding material, civilwork, POP work, mounting framework, front frames. Complete. or the Switch socket. Complete for all heights and levels.

Shri Rati Engineering