REPAIRS TO JOINERIES PLASTER FLOOR AND WALL TILING PATH AND HARDSTANDING AT CQA SV ALKAPURI EME WKSP UNDER AGE BR EAST AT GE DEHU ROAD

Amount

M&L for Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed.

M & L for Pre - cast cement concrete 1:3:6 type C-1, (20mm graded stone aggregate) block masonry with solid blocks built in cement mortar 1:6 all as specified and as directed.

M&L for Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar.

Demolition of concrete ( unreinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level)

M&L for 75 mm thk Cement conc type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair .

M&L for PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thick as in sub base complete all as specified.

M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified.

M& L Chequered Cement Concrete Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified.

M&L 40 mm thick P.C.C 1:2:4 type B-1 using 20 mm graded aggregate in surface finish

Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement.

M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls.

M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemper on walls.

M&l Complete removal of existing treatment of painted surfaces and priming with alkali resistant priming paint & applying two coats of oil emulsion distemper on wall including preparation complete all as specified & as directed.

M & L complete removal of existing treatment of painted surfaces applying two coats of cement paint complete all as specified and directed.

M & L applying one coat of synthetic enamel paint on old painted wooden surface over 10cm of width or girth incl preparation complete

M&L One coat of synthetic enamel paint on old painted steel surfaces over 10 cm width or girth incl preparation of surfaces complete

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.

M&L for Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.

M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M & L for ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

All as per item No 11 above but on skirtings incl 10 mm th rendering in CM (1:4) complete.

M&L for vitrified coloured tiles 10mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete. complete all as specified and directed.

Ditto above item No 13 but on skirting over 10 mm th rendering in CM 1:4 complete.

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 7 mm thick as in vertical surfaces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 all as directed.

Taking up or down steel tubes and connections including cleaning for refixing or removal to stones bore of pipe 15mm.

All as per item No. 65 above but bore of pipe 20mm

M&L Supplying and laying of 20mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified

M&L Supplying and laying of 25mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified

S&F in repair stop valves fancy type cast copper alloy with capstan heads screwed down high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe.

S&F in repairs bib taps cast copper alloy with capstan headsscrewed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia pipe.

S & F in repairs pillar taps fancy type ,chromium plated with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe.

S & F in repairs Brass chromium plated with capstan headsshower rose of 125 mm dia complete all as specified.

S&F Grating round 140 mm size of PTMT (Minimum weight 50gms.)

Dismantling of PVC water tank of capacity exc 500 litre and n. exc 1000 litre and complete all as specified and directed.

Dismantling of PVC water tank of capacity exc 250 litre and n. exc 500 litre and complete all as specified and directed.

S&F rotational moulded Polythene (HDPE) double layer water tanks, cylindrical & vertical type 500 Litres capacity hoisted and fixed in position including provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes.

All as per item No. 40 above but 1000 litres.

Disconnecting existing PVC water tanks of capacity 500 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed.

Fixing only water tanks of capacity 500 Ltr incl cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipes.

Disconnecting existing PVC water tanks of capacity 1000 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed.

Fixing only water tanks of capacity 1000 Ltr incl cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipes.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store.

Ditto as above but n'exc 1.5 Sqm each.

Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thick PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S/F 30mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm.

Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement concrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measured from the face of the jamb into wall exc half brick but no exc one brick.

S&F Anodised aluminium Powder coating frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters,(three track) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, srews with powder coating of any colour (Thickness or powder coating not less than 50 micron) including stainless steel wire cloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stainless steel wire staples. and 3.0 mm th sheet glass ordinary quality plain and glazing Complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stainless steel wire staples.

S&F 3.0 mm th sheet glass ordinary quality plain and glazing with oil putty in square n'exc .5 sqm in each pane.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stainless steel wire staples.

S&F in repair 4.0 mm th sheet glass ordinary quality plain and glazing with oil putty in square n'exc .5 sqm in each pane.

S & F of 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S&F 125 mm MS, Butt hinges, medium weight cold rolled fixed with screw or welding complete.

S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S & F in repairs of 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F in repairs of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S&F in repairs 125 mm MS, Butt hinges, medium weight cold rolled fixed with screw or welding complete.

S & F in repairs of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S & F in repairs Ball brass valve high pressure with polythene float and nuts complete screwed for iron pipe or brass ferrule bore of pipe 20 mm dia complete all as specified.

Demolition & breaking up drain pipes (SWG, AC, RCC etc) set in CM int dia of pipe 100mm with all fittings .

.- ditto - all as per item No. 95 above but 75mm dia pipe with all fittings.

S/F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 110mm dia pipe

S/F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 75mm dia pipe

S&F PVC (SWR) bend 110 mm dia all as specified and directed

S&F PVC (SWR) bend 75mm dia all as specified and directed

S& F in repairs stainless steel Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified. (Note : Stainless steel sink to be provided in lieu of ground cemented washing area, hence no credit)

S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm

S&F as in repairs PVC low/high level flushing cistern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides along with PVC flush pipe 32mm dia jointed to WC and handle incl brackets fixed in repairs all as directed. (Note:- Removing existing flushing system of CI or any other quality incl brackets).

S&F in repairs plastic water closet seat, black / White closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device.

S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & flush pipe fixed in repairs .

S&F in repairs 25mm chromium plated aluminium alloy anodised curtain rails or pipes fixed to brackets complete all as specified and directed.

S&F aluminium anodised brackets for 25mm dia curtain rods complete all as directed.

M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete

S & F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

M&L For plain cement 1:2:4 type B2(using 40mm graded stone aggregate)as in Cement concrete in surface channels and drains complete all as specified.

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc.

M & L in repairs 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cup board shutters, partitions, shelves and similar work. Complete all as specified and directed.

S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails. complete all as specified and directed.

S&F, 100mm size Hasp and staple, safety type aluminium anodized stove enamelled black with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

Providing and carrying out water Proofing treatment to toilet, sunken slabs, wet areas ets, after proper surface preparation, carry out cementitious injection grouting at leakage point using cebex 100 plasticised expanding grounding admixture, application of polymer modified at slab wall junction using Nitoband SBR latex screen modifier cum bonding agent and application of two coat of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc, complete including 15mm thick cement plaster in CM 1:4 all tools and plant as per manufacturers specification including removal and refixinf of fixtures complete all as specified and directed.

M&L cement concrete type E-2 1:5:10 using 40mm, graded brick agg as in sub base.

S & F in repairs CP grating 125 mm round fixed on floor / nahani trap fixed with 1:1 CM complete

M&L PVC (SWR) floor trap with grating including jointing with solvent cement 75mm bore dia

KARPE AND SONS CONSTRUCTION

Star Construction

D J Construction

Samyak Engineers

RAMESH PATIL

PREETI ENTERPRISES

SAI TILES ARTS