Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
9 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE (KH) Yol
GE (KH) Yol
SPECIAL REPAIR TO BLDG NO P-36 IN CORPS CAMP UNDER AGE B/R-II AT MIL STN YOL
2026_MES_798762_1
GE/Y-106/2026-27
Open Tender
Civil Works
Item Rate
180 days
YOL CANTT
Please refer tender documents
7 documents required · 7 mandatory
₹500
GE (KH) Yol
₹96,000
Yes
14 Nov 2026
14 Nov 2026
11 Dec 2026
14 Nov 2026
9 Dec 2026
2 Dec 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing in position false ceiling at all heights with GRG ( Glass Fibre Reinforced Gypsum ) having BIS 2095 Part 3 & moisture content less than 2%, humidity resistance of 99% , NRC 0.80 to 0.85 as per IS 8225:1987, Non Combustible as per BS 476 ( Part 4)-1970 and light Reflectance of 90% ( Minimum ), With 10 mm thick Fully perforated Square edge GRG panels/tiles of size 595 x 595 mm factory finished in white with square perforations arranged in a uniform grid pattern, having minimum Square perforation size varying from 5mm x 5mm to 12.2 x 12.2 mm with perforation layout designed to maintain uniform module continuity across panel joints and edge spacing coordinated to maintain uniform perforation module when adjacent panels are installed, backed with factory applied white acoustic fleece and having approximate perforation area of 10–11%, perforation layout and pattern shall be as per manufacturer’s standard design and approved sample. comprising of a frame made from especially fabricated galvanized mild steel sheet 0.50 mm thick pressed section(galvanizing @120 grams per sqm including both sides) i.e. vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastener with 10mm bolt. This same channel is then to be fixed in horizontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glass wool of 50mm thickness is then to be inserted in the slots and finally GRG non-combustible panels/tiles are to be screw fixed with self Tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing compound and fiber joint tape roll 50mm wide (90 meter) roll and two coats of primer suitable for paneling as per manufacturer’s specification as Per direction of Engineer-in-Charge all complete. (Note: All the cuttings/making holes for electrical fittings/items are considered in the mentioned rate. Contractor shall quote his rate accordingly) including dismantling of existing false ceiling of any type or size with frame all as specified. | 235 | Sqm | - | - |
| 2 | S&F wall panelling consist of heavy duty aluminium box section 50mm x 50mm @ 600mm c/c both ways horizontally and vertically. The vertical alternate frames to be fixed to the ceiling with necessary fixtures. The framing shall be finished with 12mm commercial ply and finished with 3 mm thick veneer finished with melamine polish. The shade of laminate/veneer and polishing finish to be got approved from GE/Engr in Charge. The rates shall inclusive of necessary hardware items etc and including dismantling of existing wall panelling of any type complete all as specified and directed.
Note: All the cuttings/making holes for electrical fittings/items are included in the quoted rate. Contractor shall quote his rate accordingly) | 225 | Sqm | - | - |
| 3 | Solid PVC Wall Lining consisting of 5mm thick wood grain printed sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed by Engineer in Charge. | 60 | Sqm | - | - |
| 4 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer in Charge. | 10 | Cum | - | - |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the
premises complete all as specified and directed by Engineer in Charge. | 35 | Sqm | - | - |
| 6 | M&L Cement concrete 25mm thick type B-1, 1:2:4 (20mm graded crushed stone aggregate), finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engineer in Charge. . | 350 | Sqm | - | - |
| 7 | Virified Ceramic tiles 10 mm thick (square/ rectangular) polished double charge, area of each tiles exceeding 0.42 sqm but n exc 1.00 Sqm, in floors etc. set and jointed in over and including 15mm thick screed bedding layer of cement mortar in CM 1:6 neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer in Charge. | 350 | Sqm | - | - |
| 8 | Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but n exc 1.00 Sqm, in floors etc. set and jointed in over and including 10mm thick backing of cement mortar in CM 1:4 as in vertical surfaces, skirting etc neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer in Charge. | 35 | Sqm | - | - |
| 9 | Taking down cement plaster/decayed concrete from RCC roof projections/upward parapet walls/ down ward facia/soffits and fins of RCC chajjas /beams/columns/balconies etc. Supply and fixing by means of nailing wire netting of galvanised wire 1.40 mm dia and mesh size 20 mm and brushing neat cement slurry with 3.00 kg of cement/sqm and Material & Labour for 20 mm thick cement rendering in two layers of 10 mm each (top/final layer shall be rendered after final setting of under layer) in Cm 1:3 on concrete surfaces including scaffolding at a height upto 7.00 mtrs. etc complete all as specified and directed. | 10 | Sqm | - | - |
| 10 | Demolition of stone/boulders or brick masonary built in cement mortor including all quoins, arches, pillars, etc but excluding ashlar facings, dresses stone work and precast concrete articles etc, complete all as specified. | 10 | Cum | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
Tender106.pdf
Tender Documents • 0.56 MB
BOQ_896092.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .