Supply, Installation, Testing and Commissioning of 1no. 60 kW Dual Gun DC Fast Charging Station for Electric Vehicles at PWD Rest House, Amritsar.

Input Voltage Range : 340-480V, Current THD : < = 5%, Regulation Accuracy : < =1%, Precision of current : < =1%, Output voltage : 200-1000V DC Power Factor : > =0.99, Efficiency : > = 96% , Output Connector : CCS2 , Output Current: 150A per Gun, Output cable length : 5 meter Display : 7" TFT LCD with touch , Push Button : Emergency stop , User Authorization : Rfid + OCPPv 1.6 Status indicator : Power, Status, Charging, Fault Ambient Temperature : -20 deg C TO 55deg C , Storage Temperature : -40 deg C to 70 deg C Altitude: <= 2000m, Humidity: <95% , non condensing, Communication: Wifi, RS485, LAN/4G + OCPPv 1.6 +CMS , Metering and Billing : Available Charging Operation : 2 Nos . RFID Card / Scan QR Code / Mobile App Input /Output Protection : Over /under voltage protection, overload protection, short circuit protection, current leakage protection, Grounding protection, Surge protection, over/ under temperature Protection, Communication Failure , Plug out Protection Protection Level : IP54, Cooling : Forced Air Cooling, Mechanical Impact : IK10, Safety : CE Type Test Certification: ARAI, Pune as per IS 17017 Warranty : 1 years, PMP Compliance: MHI, Mounting: Floor mount

Providing and Installation of Charger Management system with Backend system to remotely manage chargers to view and download reports and user side application ios and android platforms for payment collection for 3 years per charger basis with following features. 1. ⁠Track all charging metrics. 2. Reports for energy consumption and utilization 3. ⁠Scan, Charge & Pay. 4. ⁠Authenticate with a mobile OTP. 5. ⁠Top up account to charge. 6. ⁠Track charging session in real-time. 7. Track Settlement dues and status. 8. Monitor and monetize occupant charging. 9. Charging summary reports. 10. Check the availability status, operation timing, estimated charging prices, charging point status. 11. Review and rate a charging station. 12. Notifications and alerts are generated at the mobile application to provide the best user experience. 13. Charging station management is done through the web-based application. 14. OTA Firmware upgrade as per requirement are carried out through the web-based application. 15. Supports OCPP 1.6, 20.1 16. Energy Management System for balancing drawing load of the charger from the grid 17. Driver groups-based tariffs assignment and report generation 18. UPI Based APP Less Charging.

SITC of Sim cards for Internet connectivity in the EV chargers for online payment and monitoring for 3 years per charger

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm GI strip on surface or in recess for connections etc. as required.

Supplying of following sizes XLPE/PVC insulated and PVC sheathed Aluminium armoured 1.1 KV grade confirming to IS 7098(Part 1) 1988 on wall surface/cable tray/ masonary trenches/ Hume/ Metal pipe complete etc. as required. 3.5C X 240 Sq.mm.

Supplying of laying of following sizes XLPE/PVC insulated and PVC sheathed Copper armoured 1.1 KV grade confirming to IS 7098(Part 1) 1988 on wall surface/cable tray/ masonary trenches/ Hume/ Metal pipe complete etc. as required. 4C X 25 Sq.mm.

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 185 sq. mm and upto 400 sq. mm

Laying of following sizes XLPE/PVC insulated and PVC sheathed Aluminium armoured 1.1 KV grade confirming to IS 7098(Part -1) 1988 on wall surface/cable tray/ masonary trenches/ Hume/ Metal pipe complete etc. as required. UPTO 35 SQ.MM.

Supplying and making end termination with brass gland and aluminium lugs for following size of XLPE/PVC insulated and PVC sheathed Aluminium Armoured cable of 1.1 KV grade as required

3.5 X 240 sq. mm (62mm)

4 X 25 sq. mm (28mm)

(EV CHARGER DISTRIBUTION PANEL) Supply, erection, testing and commissioning of 415V, 3 phase 4 wire 50 c/s , LT Panel , IP 43 , Form-3B, fabricated CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland plates i/c cleaning & finishing complete with 9 tank process for powder coating in approved shade, having required capacity extensible type FP bus bars of high conductivity, DMC / SMC bus bars of high conductivity, DMC/ SMC bus bar supports, , bottom base channel of MS section not less than 100mm x 50 mm x 6 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of bus bars, interconnection, indication lamps, Rotary switches , push buttons necessary accessories, complete with following incoming and OUTGOING switchgears with protection and metering , Control wiring with 2.5sq. mm. FRLSH insulated copper conductor , cable alleys, cable gland i/c providing following switch gears etc. complete as required -- INCOMER 1 no , 400 A FP MCCB (36 KA) with spreader and handle, Icu=Ics=Icw (1 sec), inbuilt Protection & Display - R,Y,B on, off trip indication lamp - 1 set. Multi-Function Meter C.T. 400/5A, CLASS 1.0, 15VA- 1 set. BUSBAR 400A Aluminium busbar 36 KA OUTGOING: 3 Nos 160 Amp FP MCCB 20KA Conforms to IS/IEC 60947-2 breaking capacities › ICS= 100% of ICU,

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) 8 inch from ground level

Supply of Tensile fabric mm Canopy Including mounting structure 10’*6’, tensile fabric and civil foundation complete in all respects as required as per the approval of authority

Any other item required for succesful completion for SITC + 5 years O & M cost for EV Charger.

TOTAL (In Figures)

TOTAL (In Words)

*Note - Values mentioned in Words will be used as final.

PUNJAB ENERGY DEVELOPMENT AGENCY, CHANDIGARH

E-TENDER NOTICE NO. PEDA/2026-27/17

TECHNICAL BID

Name of the Company

Type of the Company

Company Office Address

Year of Registration / Incorporation in India

Mobile Number

E- Mail Address

EMD of Rs. 25,000/- (Rupees Twenty Five Thousand Only) : Submitted / not submitted

Concerned person details of the Company submitting this e-bid

PAN No.

GST No.

Minimum Eligibility Criteria

Declaration Letter (Declaration Letter on official letter head stating the following):

NOTE : SCAN COPIES OF THE ABOVE DOCUMENTS SHOULD BE ATTACHED WITH THE BID AS PROOF