Loading…
Loading…
Tender Value
₹35.9 Cr
EMD Value
₹35.9 L
Closing Date
22 Jun 2026, 5:00 pm
Gandhinagar Municipal Corporation (GMC), Gandhinagar
PROVIDING AND LAYING OFFTAKE LINE, CONSTRUCTION OF WATER DISTRIBUTION STATION WITH ELECTRO-MECHANICAL WORK, RISING MAIN, ESR INCLUDING O & M FOR 2 YEARS, WATER SUPPLY DISRIBUTION NETWORK IN TP-28 AND 29 PART-1 OF GMC AREA
310231
36/2026-27
Open
Civil Works - Water Works
Gandhinagar
5 documents required · 3 mandatory · 2 optional
₹28,320
Deputy Municipal commissioner Gandhinagar Municipal Corporation, Gandhinagar
₹35.9 L
1 Jun 2026
1 Jun 2026
1 Jun 2026
22 Jun 2026
1 Jun 2026
Bill of Quantities and Rates
Providing and Laying offtake line, Construction of Water Distribution Station with Electro-
Mechanical Work, Rising main, ESR including O & M for 2 years, Water Supply Disribution
Network in TP-28 and 29 Part-1 of GMC area
Providing and laying offtake line from exist. CWTM to Prop. WDS in TP-28 and 29 Part-1 Scheme
Item Qty. Unit Rate in Rs. Amount in Rs.
01 Excavation for pipe line trenches distribution network, valve
chambers for all required gradient and line including safety
provisions using site rails and stacking excavated stuff
including up to all required lead cleaning the site etc. complete
for all lifts and strata as specified.
In all sort of soils and soft murrum
1.5 to 3 mt. Depth 5.00 m3 98.00
02 Providing and supplying DI K-9 grade pipe with EPDM gasket
for following nominal bore diameter with internal cement
mortar lining including all taxes, insurance, transportation,
freight charges, octroi, inspection charges, loading, unloading,
conveyance to site, stacking etc. complete. (IS 8329-2000).
450 mm dia. DI pipe (K-9) 100.00 Rmt 6,673.00
03 Lowering, laying and jointing DI Pipes of various classes with
specials of following diameters in proper position grade and
alignment as directed by Engineer in charge.
450 mm dia. DI pipe (K-9) 100.00 Rmt 265.00
04 D.I. Specials - Manufacture, Supply,Delivery of Ductile Iron
flanged Socket Spigot Bends, tees,reducers or any other
specials as per BS-EN-545/1995 Class-A series K12 suitable
for use with D.I Pipes manufactured as per IS:8329/1994
delivery of specials to site of works any where in Gujarat
including fixing, all taxes, loading, unloading, carting,
stacking,insurance, inspection charges, octroi etc. complete.
Above 300 mm dia 266.00 Kg 151.00
05 Providing and laying cement concrete M20 for thrust block 54.00 m
and encasing including formwork but excluding the cost of
reinforcement with curing etc. complete, as directed.
06 Providing TMT Bar Fe-500/500D reinforcement bars for R. C. 2.00 MT 77,285.20
C. work including bending, binding and placing in position
complete upto floor two level.
07 Providing and laying cement concrete 1:2:4 (1 cement : 2 1.00 m
coarse Sand :4 Graded stone aggregate 20 mm nominal size)
and curing etc. complete excluding cost of form work.
Item Qty. Unit Rate in Rs. Amount in Rs.
08 Providing,supplying ,fixing ISI mark Ductile Iron D/F
manually gear operated SLUICE VALVE including taxes,
insurance, transportation, fright charges, Octroi Inspection,
charges, loading , unloading, conveyance to site stacking, etc.
complete valve with ISI mark only
PN 1.0 with hand wheel /cap operated (PD Type Short body)
09 Providing and supplying CI/DI Tamper proof /Bi Stream Air
valves with SS 304 Float gun metal nozzle of approved make
& quality of following class and diameter including all taxes,
transportation, freight charges, octroi, inspection charges,
loading, unloading, conveyance to the departmental stores,
stacking etc. complete.
With isolating sluice valve PN
10 Lowering, laying & jointing in position following air Valves
including cost of all labour, jointing material, including nut
bolts & giving satisfactory hydraulic testing, etc. complete.
With Isolating Sluice Valve PN
11 Refilling the pipeline trenches including ramming, watering, 205.00 m
consolidating disposal of surplus stuff as directed within a
radium of 3 Km.
12 Extra rate over item of excavation of earth for excavation of
asphalt pavement/RCC of thickness upto 0.30 meter including
demolishing the asphalt carpet, metal, soiling/cutting
Reinforcement etc. comp. with stacking the material as
up to 0.30 meter (By any type of Breaker Machine or R.C.C 88.00 Smt 200.00
Cutter machine including cost of operator, fuel &
transportation etc complete.
13 Reinstatement of Bituminous road including with 40 mm thick 88.00 Smt 1,945.00
Bituminous Concrete using 5.4 % Asphalt ,50 mm thick DBM
using 4.5 % Asphalt with tack coat using RS 1 emulsion @
2.5 Kg/Sqm , with Tack coat using RS 1 emulsion @
Kg/Sqm, Prime coat with SS 1 emulsion @ 7.5 kg/Sqm,250
mm thick WMM , 200 mm thick GSB V loosening and
recompacting ground as per respective MoRTH specification
and as directed by engineer in charge.
Item Qty. Unit Rate in Rs. Amount in Rs.
14 Construction of chambers in brick masonary, locally available
in C.M. 1 : 6, foundation concrete 150 mm thick in C.C. 1:4:8
of trap metal size 25 mm to 40 mm thick, inside cement plaster
in C.M. 1:3 and cement pointing outside in C. M. 1 :3 & top
cover of precast RCC slab 100 mm thick upto 1 mt. depth
from G.L. but excl. cost of excavation and refilling. With cast
in situ RCC slab in two piece with fixing FRC frame and
cover etc. complete(excluding cost of frame & cover ) with
mm thick brick masonary wall in C.M.1:6
(1) For Sluice Valve & Air Valve
a).1.3 x 1.3 mt. and 1.0 mt. deep chamber 2.00 No. 11,351.00
b) for 1 m. extra depth 2.00 Rmt. 6,084.00
15 Providing F.R.C. MH seat cover incl. carting to the work site 2.00 No. 2,380.00
etc. comp. Directed. F.R.C. Extra Heavy Duty (EHD-35)
machinehole Covers & Frames Cover: 728mmø & 100 mm
thick circular cover, 35.00MT load design,100 x 2mm MS flat
all round,16mm øplain round bar for lifting the cover & should
be fitted with plastic cups. Frame:560mm ø clear opening, -
888 x 888 x 175mm. On the upper periphery off rame 25x3
mm wide MS flat should be well embed in concrete to protect
the edges off rame. FRCE.H.D.-35 machinehole cover &
frame described as above.
16 Demolition and disposal of unserviceable materials with all
i) Unreinforcement Cement Concrete 50.00 m3 639.72
17 Demolition including stacking of serviceable materials and
disposal of unserviceable materials with all lead and lift
18 Demolition of Brick work and stone masonry including
stacking of serviceable materials and disposal of unserviceable
materials with all lead and lift
i) In Cement Mortar 50.00 m3 577.92
Construction of Water Distribution Station For TP-28 and TP-29 Part-I In GMC Area
01 'Excavation for foundation for loose and soft soil including
sorting out and stacking of useful materials and disposing of
the excavated stuff up to 50 meter lead.
02 Extra over item no. 1 above for lead from 50 m to 5 Kms. as 2303.00 m3 103.26
Item Qty. Unit Rate in Rs. Amount in Rs.
03 'Extra over item no. 1 above for lead from 5 Kms. to 10 Kms. 2303.00 m3 112.74
04 Filling with available excavated earth (excluding rock) in 2660.00 m3 136.92
trenches, plinth, sides of foundation in layers not exceeding
cm in depth consolidating each deposited layer by ramming
05 Providing and laying cement concrete 1:2:4 ( 1 cement : 190.00 m
2coarse Sand :4 Graded stone aggregate 20 mm nominal
size) and curing etc. complete including cost of form work in
Foundation and Plinth.
06 Providing and laying cement concrete 1:2:4 ( 1 cement : 2 90.00 m3 3,758.19
coarse Sand :4 Graded stone aggregate 20 mm nominal size)
and curing etc. complete excluding cost of form work in
Foundation & Plinth.
07 Providing and cast in situ C.C. in grade M-30 proportions of
ingredients as per mix design by weigh batching using granite,
quartzite trap metal of size 12 mm to 20 mm and or 6 mm to
12 mm including scaffolding centering formwork, needle
vibrated consolidation, curing and hydraulic testing etc.
complete (excluding cost of reinforcement) upto 6 meter
height / depth Av. G.L. for all water retaining structures.
Columns 410.00 m3 8,213.00
R.C.C. walls 300.00 m
R.C.C. staircase 10.00 m
Columns 190.00 m3 9,317.00
Top Slab 160.00 m
08 Providing and cast in situ C.C. in grade M-25 proportions of
ingredients as per mix design by weigh batching using granite,
quartzite trap metal of size 12 mm to 20 mm and or 6 mm to
12 mm including scaffolding centering formwork, needle
vibrated consolidation, curing and hydrulic testing etc.
complete (excluding cost of reinforcement) upto 6 meter
height / depth Av. G.L. for all water retaining structures.
R.C.C. beams, lintels and bracket for gantry or chain pully 80.00 m3 8,347.00
blocks, plinth beams, tie beams, weather shed etc.
R.C.C. slabs and platform 70.00 m3 8,077.00
R.C.C. columns 60.00 m 3 9,195.00
R.C.C. footings 50.00 m 3 8,077.00
09 'Providing TMT Bar Fe-500/500D reinforcement bars for R. 203.00 MT 77,285.20
C. C. work including bending, binding and placing in position
complete upto floor two level.
Item Qty. Unit Rate in Rs. Amount in Rs.
10 'Grouting with1:3 cement, sand mortar for anchor bolt pockets, 5.00 m3 3,628.28
machine bases, pipe sleeves, pockets holes, etc. including
roughening and cleaning of concrete surfaces, curing, etc.
11 'Supplying, cleaning, cutting, bending, welding, fabricating, 6226.00 Kg 88.38
erecting structural steel in position irrespective of locations
and levels as per drawing including handling and transport etc.
complete including applying two coats of primer red oxide and
two coats of approved quality of paint over it etc. complete as
directed for gentry girder, platform, stairs, chequered plate for
cable trench,grating etc.
12 'Filling in plinth with sand under floors including watering, 80.00 m3 481.70
ramming, consolidating and dressing etc. complete.
13 'Providing and cast in situ C.C. in grade M-20 (proportions as
per mix design or as per table of IS456 2000 in masses by
weigh batching) using granite, quartzite trap metal of size
mm to 20 mm for RCC Work including scaffolding centering
formwork, needle vibrated consolidation, curing complete up
to 6 meter depth or height (excluding cost of reinforcement
and neat finishing) with centering and shuttering/ deshuttering
etc. complete for structure other than water retaining.
b) R.C.C. footings & Raft (without form work) 20.00 m3 5,292.00
14 'Providing and applying with two coats 20 mm thick mala 1620.00 m2 298.10
inside cement plaster with water proofing agent on inside of
Sump of 12 mm thick backing coat of C. M. 1:4 (1 cement :
Coarse sand) and 8 mm thick top coat of C. M. 1:2 (1 cement:
2 coarse sand) etc. complete including necessary curing,
scaffolding required if any etc. complete.
15 'Providing and applying 15 mm thick cement plaster in single
coat on brick work with floating coat of net cement slurry for
interior plastering of wall & Ceiling upto finished even and
smooth in Cement motar 1 : 3 (1 cement : 3 sand) including
racking out joint curing, scaffolding required if any, with
necessary cement finishing etc. complete as directed.
(ii) Ceiling 380.00 m 2 262.08
16 'Interior plain faced 15 mm thick cement plaster (1:3) with 920.00 m 2 270.38
floating coat of neat cement slurry on RCC ceiling where
specified on drawings at two levels including scaffolding,
curing, etc. complete. This rate shall include moulding where
specified. The rate shall include 2% approved quality water
proofing compound (by weight) of cement.
Item Qty. Unit Rate in Rs. Amount in Rs.
17 'Providing and applying 20 mm thick sand faced cement 1350.00 m2 315.69
plaster on walls upto height 10 metres above ground level
consisting of 12 mm thick backing coat of C.M. 1:3 (1-cement
: 3-sand) and 8 mm thick finishing coat of C.M. 1:1 (1-
cement : 1 sand) etc. complete.
18 'Providing and laying cement concrete flooring 1:2:4 (1 760.00 m2 376.51
cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) including water proofing compound finishing
with a floating of neat cement slurry etc. complete laid in one
layer finished including necessary curing at bottom of sump
Average 50 mm thick
19 'Providing & fixing F.R.C. MH seat cover incl. carting to the 1.00 No. 2,380.00
work site etc. comp. Directed. 'F.R.C. Extra Heavy Duty
(EHD-35) Manhole Covers & Frames Cover: 728mmø &
mm thick circular cover, 35.00MT load design,100 x 2mm MS
flat all round,16mm øplain round bar for lifting the cover &
should be fitted with plastic cups. Frame:560mm ø clear
opening, -888 x 888 x 175mm. On the upper periphery off
rame 25x3 mm wide MS flat should be well embed in concrete
to protect the edges off rame. FRCE.H.D.-35 manhole cover &
frame described as above.
20 'Providing and fixing in position 150 mm diameter CI air 24.00 No. 1,706.00
ventilators including fixing of jali grating and cover and
painting the same. (weight 25 Kg. approx.)
21 Providing and laying one layer of bitumen kraft paper 1102.00 m2 18.00
conforming to IS : 1398 of approved make and quality.
22 'Providing & fixing in position 6.0 m high aluminium water 1.00 No. 10,651.00
level indicator made of 230 mm width and 4mm thick
aluminium sheet fixed on angle 50x50x6 mm frame and
bracing and fixing in concrete base as per specification or as
directed by Engineer-in-charge.
23 'Providing, Cement vata (10cm. X 10. cm. size) quarter round 170.00 Rmt 24.28
in cement motar 1:1 including neat cement finishing, watering
24 'Providing 100 mm x 100 mm size vata in cement concrete 420.00 Rmt 44.00
(1:2:4) including water proofing compounds, smooth finish,
curing, etc. complete for the internal side of the sump, pump
house and chlorination room.
25 'Brick masonry in cement mortar (1:6) using common burnt 210.00 m3 4,502.81
clay building bricks having crushing strength not less than
35kg/cm2 including scaffolding, curing, etc. complete for
walls, parapets, etc. at two levels.
Item Qty. Unit Rate in Rs. Amount in Rs.
26 'Brick work using common burnt clay building bricks having 20.00 m3 4,214.09
crushing strength not less than 35kg / Sq. C. M. in ramp, steps
and Foundation & Plinth in cement morter1:6 (1 cement :
coarse sand) including racking out joints, curing, scaffolding
required if any etc. complete, as directed.
27 Half brick masonry in common brunt clay building bricks 10.00 m
having crushing strength not less than 35 Kg/Sq.Cm. in
Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in
foundation and plinth (B) Conventional
28 Wall painting (two coats) with plastic emulsion paint of 1500.00 m
approved brand and manufacture on undecorated wall surface
to give an even shade including thoroughly brushing the
surface free from mortar droppings and other foreign matter
and sand prepared smooth.
29 Distempering (two coats) with oil bound distemper of 1824.00 m2 112.58
approved brand and manufacture and of required shade on
wall surface to give an even shade over and including a primer
coat with distemper primer of approved brand, and
manufacture after thoroughly brushing the surface free from
mortar dropping and other foreign matter and also inclusive of
preparing the surface even and smooth etc. complete, as
30 Applying two coats of putty & two coats of primer of 1824.00 m2 40.59
approved brand and manufacture on new wall surface to give
an even shade including thoroughly brushing the surface free
from mortar dropping and other foreign matter and sand
papered smooth.
31 'Providing and fixing iron doors including using the frames of 1680.00 Kg 88.38
channels, angles and flats and MS sheets as per drawing
including revating or welding and fixing in concrete block
including iron fixture and fastening with one coat of primer
and 3 coats of enamel paint etc. complete.
Item Qty. Unit Rate in Rs. Amount in Rs.
32 'Providing & fixing in position aluminium fully panelled doors with 17.00 m2 3,456.00
15 micron natural matt brush finish anodised as per over all size
shown on the drawings and aluminium sections of approved make
conforming to IS:733 and IS : 1285, made out of 102 mm x 45 mm x
1.90 mm thick aluminium outer frame section weighing 1.640 Kg/m.
and shutter sections with bottom / lock rail 96 mm x 45 mm x
mm, top rail 48 mmx 45 mm x 2.70 mm weighing 1.38 Kg/m.
vertical styles 48 mm x 45 mm x 1.90 mm weighing 0.976 Kg/m.
with rounded sides, fixed with rawl plugs and screws or with fixing
clips, or with expansion hold esters including necessary filling up of
gaps at junctions, at top, bottom and sides with required
PVC/neoprene felt etc. and aluminium snap beading for glazing /
panelling, C. P. brass/stainless steel screws, including standard
anodised aluminium fittings and fixtures of approved make and of
adequate size and in adequate numbers, double action floor springs
of approved make for each shutter with standard pivot panels of
mm thick pre-laminated three layer medium density, exterior grade
particle board (termite proof, water proof and fire proof) Grade
Type II conforming to IS : 12823 bounded with phenol
formaldehyde synthetic resin, of approved make including cost and
fixing of fixtures etc. complete as per detailed drawings with all lead
33 Providing and fixing window having extruded aluminium 45.00 m2 1,583.95
Colour anodized section frame main outer size 95mm x 24mm
x 1.17 mm (of Jindal Section no : 2459 @ wt. of 0.738 Kg/mt),
horizontal Three track member size 92mm x 31.75 mm x
mm (of Jindal Section no. 8688, @ Wt. 1.07 Kg/mt), vertical
member of size 92mm x 31.75mm x 1.50 mm (of Jindal
Section no. 8933, @ Wt. 1.06 Kg/mt.) with sliding shutters of
horizontal member size 40mm x 18mm x .29 mm (of Jindal
section no. 8947 @ wt. 0.456 Kg/mt.) vertical member of size
40mm x 18mm x 1.29mm (of Jindal Section no. 8949 @ wt. of
0.456 Kg/mt with 5 mm thick transparent bronze colour tinted
float glass with powder coated aluminum fittings and fixtures
and transparent silicon sealant glass fixing to frame as per
34 Providing and fixing M.S. round or square bars with M.S.flats 370.00 Kg 70.50
at required spacing in wooden frames of windows and
clerestory windows.
35 Providing and fixing standared extruded of alluminimum 13.00 m2 1,175.56
section of size 63mm x 38.10mm x 1.2mm (Jindal Section :
2434, @ Wt. 0.643 Kg/mt.) with colour powder coated
alluminium frame for ventilation with 5 mm thick frosted glass
as details etc complete for Ventilation
36 Providing upto floor two level precast cement concrete jali or 8.00 m2 678.93
grill 1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone
aggregate 6 mm nominal size) reinforced with 1.6 mm dia.
Mild steel wire including roughening,cleaning, fixing and
finishing in cement mortar 1:3 and curing complete. (B) 40mm
Item Qty. Unit Rate in Rs. Amount in Rs.
37 Providing & fixing in position aluminium grill with 15 micron 59.00 m2 1,750.00
natural matt brush finish anodised as per over all size shown
on the drawings and aluminium sections of approved make
conforming to IS:733 and IS : 1285, made out of DG -
design ( Jindal or equivivelent ) fixed with required size F
channel, rawl plugs and screws or with fixing clips, or with
expansion hold esters including necessary filling up of gaps at
junctions, at top, bottom and sides with required
PVC/neoprene felt etc. and aluminium snap beading for
glazing / panelling, C. P.brass/stainless steel screws, including
standard anodised aluminium fittings and fixtures of approved
make and of adequate size and in adequate numbers, including
cost and fixing of fixtures etc. complete as per detailed
drawings with all lead and lifts.
38 Providing and laying polished Kota stone slab 20 to 25 mm 73.00 m2 1,410.00
thick in Sills & Jambs of doors, Windows & Vent laid on
mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and
jointed with grey cement slurry including rubbing and
polishing etc. The rate Shall also include half round bullet
edge complete as directed by engineer inchage.
39 Paint on soffit of tank roof slab with 2 coats of bituminous 920.00 m2 156.00
paint including cleaning the surface by scrapping and air
blowers as directed by engineer in-charge.
40 Providing and fixing 40mm dia. GI pipe medium weight 30.00 Rmt 1,350.00
quality as openable type with angle iron support at 1.5 m c/c
using 75 x 75 x 10 mm angles, 1 m long with three rows of
pipes as railing including necessary painting with two coats of
approved quality oil paint over one coat of approved primer
including necessary welding, bolting required, if any.
41 'Painting two coats including priming coat on new steel & 100.00 m2 128.62
other metal surfaces with enamel paint, brushing, interior to
give an even shade including cleaning the surface of all dirt,
dust, other foreign matter.
42 Providing & fixing 50 cm wide MS ladder (without safety 9.00 No. 2,950.00
cage) fabricated from MS flats 10 mm x 75 mm with 20 mm
dia steel bar steps in double rows @ 30 cm C/C. The include
stays of 10 'fixed at 3 mt. C/C with welding anchoring and
coats mm x 50 mm flats anticorrsive paint.
43 Providing & fixing 50 cm wide MS ladder (with safety cage) 37.00 No. 3,285.00
fabricated from MS flats 10 mm x 75 mm with 20 mm dia
steel bar steps in double rows @ 30 cm C/C. The include stays
of 10 'fixed at 3 mt. C/C with welding anchoring and 3 coats
mm x 50 mm flats anticorrsive paint.
44 Providing and fixing PVC pipe of 6Kg./cm2 of 140 mm dia 60.00 Rmt. 349.00
for rain water with shoe.
Item Qty. Unit Rate in Rs. Amount in Rs.
45 Providing & laying white glazed tiles 6 mm thick in flooring, 15.00 m2 963.12
trade of steps and landing on a bed of 12 mm thick cement
mortar 1:3 (1 cement : 3 corse sand) finished with flush
pointing in white cement.
46 Providing & fixing in position 40 mm dia. UGWTS valve 2.00 No 6,527.00
controlling MS rod for operation of valve including T-shape
rod at Top 0.60 mt. length fix at rod centre and extra top at
bottom including 3 coats of bituminous paint and making holes
etc. completed with 1 mt. Above finish slab level of tank.
47 'Providing and laying chequered precast cement concrete tiles 110.00 m2 545.76
22mm thick with aggegate of sizes upto 6mm in floors, treads
of steps and landings on 20mm thick bed of C.M. 1:6 (1-
cement : 6-sand) or L.M. 1:1.5(1-Lime putty : 1.5 coarse sand)
joint with neat cement slurry with pigments to match the shade
48 'Providing and laying polished Kota stone slab flooring over
20 mm (average) thick base of cement mortar 1:6 (1 cement :
6 coarse sand) laid over and jointed with grey cement slurry
including rubbing and machine polishing etc. complete at
office area over plinth of HT Room and top of sump.
49 'Providing and laying polished Kota stone slab 25 mm thick in 20.00 m 2 1,226.46
riser of steps, dado & pillars, skirting, laid on 10 mm thick
cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with
grey cement slurry including rubbing and polishing etc.
complete at HT Room, LT Room, Office & PH et
50 Providing and laying broken china mosaic flooring for terrace 290.00 m2 779.70
using 12 mm to 20 mm broken pieces of glazed tiles to be laid
over cement mortar 1:3 to plain or sloe and to be tempered to
bring mortar crème out upto surface using white cement
including rounding off junctions and extending them upto
cm along the wall, clearing with water and oxalic acid etc. as
directed. (China Mosaic for pumphouse terrace & H.T., L.T.
& office room terrace)
51 Providing and fixing water tight construction or expansion 1320.00 Rmt 330.00
joints. 150 mm dia wide thin ribbed PVC.
52 Providing and laying rough chiseled dressed stone flooring 519.00 m2 576.79
over 20mm average thick base of cement mortar 1:5 (1-
Cement : 5-coarse sand) or L.M. 1:1.5 (1-Lime putty : 1.5 -
coarse sand) including pointing with cement mortar 1:2 (1-
cement : 2-stone dust) etc. complete. (A) 25mm thick
Item Qty. Unit Rate in Rs. Amount in Rs.
53 Providing and fixing 1.20 Metre high fencing with 2.0 Metre 12.00 Rmt 391.93
long M.S. Angle posts 40mm x 40 mm x6 mm and oil painting
3 coats fixed at 2.5 Mt,C/c. with five Horizontan lines and two
diagonals of galvanised steel barbed wire weighting 9.38 Kg.
per 100 Metre, strained and fixed to posts with G.I,staples
including fixing the postsin ground with0.5 M x 0.5.M x
M. block in C.C1:5:10 etc.complete
54 Providing and fixing of 50 dia and 300 mm long PVC 40.00 No 40.00
pipe/spout in RCC beams of U. G. tank roof slab and RCC
peripheral wall on slab top. Rate shall include carting / cutting
in required size and shape etc. complete as directed.
55 Providing,Fabricating and fixing WDS name board of size 1.00 No. 15,185.00
3.0m x 0.6m made from ISA 50 x 50x 5 mm MS angle with
nos. supports at back side vertical member of angle size 1.10m
height (inclu. 0.3m hold fast inserted in compound wall with
necessary dismentaling and fixing with cement concrete. The
rate shall also include 16g MS sheet of size 3.0m x 0.6m
including writing letters with GMC logo as directed by
engineer in charge the rate shall include painting board with
two coats of enamel paint over one coat of anti-corrosive
56 Providing and fixing water closet squatting pan (Indian type 1.00 No. 1,588.61
W.C. pan) size 580 mm x 450 mm white colour vitreous china
long pattern type conforming to IS : 2556 (Part III) together
with 100 mm size vitreous China 'S' trap as per IS : 2556 (Part
XIII) both of an approved make including jointing the trap
with the pan and soil pipe in C. M. 1:1 (1 cement : 1 sand)
with 32 dia. C. P. brass half turn flush cock complete
including earthwork, bed concrete of 1:4:8.
57 Providing and fixing flat back white colour vitreous china 1.00 No. 2,067.36
wash basin 550 mm x 400 mm size with CI brackets painted
white. Wash basin shall have 15 mm dia GI supply pipe,
overflow chase, 15 mm dia pillar cock and stop cock with
PVC bottle trap and PVC pipe piece upto wall plus 32 mm dia
PVC waste pipe upto floor level connected to 32 mm dia CI
pipe below floor and connected to nearby floor trap complete
with unions and plumber's white soldered joints with
necessary cleaning eye, complete. All chases cut in wall for
fixing pipes shall be made good in CM (1:4).
58 Providing laying and jointing in true line and level of
following dia. U.P.V.C Pipe(SCH-40) for cold water including
fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or
equivalent as approved by Engineer in charge. Pipe shall be
fixed on the wall with the help of clamp at every two meter
C/C or shall be concelled as directed including necessary
fitting etc. including testing of pipe and joints and fixing the
same with adhesive solvent, including cost of all materials.
Item Qty. Unit Rate in Rs. Amount in Rs.
25 mm dia. 25.00 Rmt 91.84
59 Providing & fixing gun metal check or non return full way
60 Providing and fixing brass screw down stop tap.
61 Providing and fixing screw down bib taps of following size. 2.00 No. 158.86
(C) Gun metal screw down bib tap. i) 15mm dia.
62 Providing and fixing 150 mm x 100 mm intercepting sewer 1.00 No. 750.00
trap embedded in concrete complete including excavation and
63 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- 1.00 No. 11,439.94
cement: 2-coarses and :4- graded stone aggregate 20 mm
nominal size) foundation concrete 1:3:6 mix (1-cement : 3-
coarse sand : 6-Brick bats 40+50 mm size) inside plastering
mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse
sand)finished with a floating coat of neat cement and making
channels in cement concrete 1:2:4 mix (1-Cement: 2-Coarses
and : 4-stone aggregate 20 mm nominal size) finished smooth
complete including curing and festing (i) Inside size 900mm x
1200 mm and 2.0 M. deep including C.I. cover with frame size
560mm diameter total weight of cover and frame to be not less
than 128kgs. (Wt. of cover 64Kg. and Wt. of frame 64Kg.) (A)
With 230 mm thick walls of brick msonry using brick having
crushing strength not less than 35Kg./Sq.cm. in Cement
Mortar 1:5 (1-Cement : 5-Coarse sand) (1) A type depth
Metre for 150 mm diameter sewer. (up to 5 mt. depth)
64 Constructing brick masonry chamber for under ground C.I. 1.00 No. 3,660.76
Inspection chamber and bends with bricks having crushing
strength not less than 35Kg.Cm 2in C.M. 1:5 C.I. cover with
frame (Light duty) 455mm x 610mm internal dimensions total
weight of cover with frame to be not less than 38Kg. (Wt. of
cover 23Kg.) and Wt. of frame 15Kg.) (R.C.C. top slab e with
1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate
20mm size) foundation concrete 1:5:10 inside plaster 15mm
thick with cement mortar 1:3 finished smooth with a floating
coat of neat cement on walls and bed concrete etc. complete.
(ii) Inside dimensions 500mmx700mm and 450mm deep for
pipe line with one or two inlets.
65 Providing and fixing in position PVC vent pipes of 160 mm 1.00 No. 1,289.00
dia 3 m length.
Item Qty. Unit Rate in Rs. Amount in Rs.
66 Providing and fixing cast iron (Spun) Nahni trap of the 1.00 No. 885.25
following nominal diameter of self cleaning design with C.I.
screaed down or hinged grating including cost of cutting and
making good the walls and floor 100mm inlet and 50mm
outlet. (C) 100mm dia.
67 Providing and fixing S.W. gully trap with C.I. grating brick 2.00 No. 1,246.92
masonry chamber and water tight C. I. cover with frame of
300 mm x 300 mm size (inside) with standard weight. (i)
Square mouth traps.(B) 150mm x 100mm size P or R type
68 Providing and fixing100mm size P or Strap for water closet 1.00 No. 330.71
squatting pan including jointing the trap with the pan and soil
pipe in cement Mortar1:1 (1-Cement : 1-Fine sand) (A)
Vitreous China.
69 Providing erecting and fixing double coated (ISI) water tank of 5000.00 litre 3.95
required capacity each with all necessary fittings and
connection etc. complete on terrace.
70 Providing, Supplying and fixing ISI mark G.I pipes with
coupling of following class and diameter including all taxes,
insurance, transportation, freight charges, octroi, inspection
charges, loading, unloading, conveyance to departmental
stores, stacking etc. complete (IS:1239) Medium Duty.
15 mm dia GI pipe sleeves 5.00 Rmt 113.00
25 mm dia GI pipe sleeves 5.00 Rmt 195.00
50 mm dia GI pipe sleeves 5.00 Rmt 387.00
Mechanical Work
Item Qty. Unit Rate in Rs. Amount in Rs.
1.1.1 MECHANICAL WORK: 4 Set 34,67,250.00
VT PUMP-MOTOR SET:
Supply, Installation, Testing and Commissioning (SITC) of Vertical
Turbine Pump with Maximum Two Stag of following duty
parameters & guaranteed efficiency of following MOC, having
RPM max. speed, suitable to couple with motor of specified rating
vertical flange mounted TEFC sq. cage induction motor, along with
column and bowl assembly, discharge head, base channel / Rolled
Steel Joist etc.
MOC: Impeller & sealing rings- CF8M, Bowl & suction bell of CI
FG 260, Shaft with coupling - SS 410, Column Pipe of M.S. ERW
of min. 450 mm dia. & min. 8.0 mm thickness and each piece of
/ 2.5 m long pipes and total length as per actual site requirement and
to achive min. submergence requirement, MS Base plate, Thordon
bearings, and Suction Strainer of SS-304 (size as per pump
manufacturer recommendation), sole plate, Flex. pin-bush coupling,
Hot dip galvanised (HDG) bolts, nuts & washers, gaskets etc.
complete as per IS and Specification.
SITC of approved make, energy efficient, Efficiency Class-IE3,
Vertical flange mounting, solid shaft, squirrel case, Induction motor
rating mini. 250 kW or higher as per IS 12615: 2018 and as per
pump mfg. recommendation, 3Phase, 415V, 50Hz., AC supply,
RPM max.synchronous speed and having TEFC enclosure with
Class F insulation (Temp. rise limited to Class B) with RTD sensors
for winding & bearing temperature protection.
Capacity : 1370 m3 / hr.,
Bowl Head : 42 m,
Motor Rating: min. 250 kW (or higher as per pump mfg.
recommendation)
Bowl Efficiency: min. 84 %
2.1.1 Supply, installation, testing and commissioning of Electric Actuator 4 Nos. 2,21,484.00
operated CI / DI Double Flanged, Sluice Valve with actuator,
integral starter, etc. conforming to IS 14846, PN 1.0 with SS 304 seat
rings and SS spindle with all hot dipped galvanised hardware's, bolts,
nuts & washers, gaskets, etc. as per spcifications.
Size : 450 mm NB (At delivery of VT Pump)
2.2.1 SITC of double flanged DI/CI Dual Plate Check Valve conforming 4 Nos. 91,340.00
to API 594, PN 1.0 with Cast Steel dual door, hinge pin & stop pin
of SS 304, springs of AISI 304 and seat of SS 304, along with all
required accessories, gaskets and hardwares,etc. and as per
specification and complete in all respect.
Size : 450 mm NB (At delivery of VT Pump - DMA -2, Type 1)
2.2.2 Item Description as per 2.2.1 and of following size complete in all 1 No. 3,26,619.00
Size : 700 mm NB (At Header of VT Pump)
2.3.1 Supply, installation, testing and commissioning of Electrically 1 No. 3,56,504.00
Actuator operated Horizontal shaft CI/DI DF Butterfly Valve,
conforming to IS 13095 / BS EN 593, PN 1.0 with SS
renewable seat ring , indicator, gear box with bolts, nuts & washers,
gaskets, etc. as per specifications.
Size: 700 mm NB (At common Header )
Item Qty. Unit Rate in Rs. Amount in Rs.
2.4.1 Supply, installation, testing and commissioning of Manually 3 Nos. 36,403.00
operated Horizontal shaft CI/DI DF Butterfly Valve, conforming
to IS 13095 / BS EN 593, PN 1.0 with SS 304 renewable seat ring
indicator, gear box with bolts, nuts & washers, gaskets, etc. as per
specifications.
Size: 450 mm NB (2 Nos. at each sump comp. I/L & 1 No. befeore
sump I/L Flow meter)
2.5.1 SITC of CI/ DI Tamper proof Flanged Air Valve with Isolation 1 No. 25,759.00
Sluice Valve as per IS 14845 PN-1.0 & IS-14846 PN-1.0
respectively with SS304 float, gun metal nozzle, complete
hardware's, bolts, nuts & washers, gaskets etc. as per IS and
Size: 150 mm NB - (At Header)
3.1.1 SITC of Flange ends Expansion Bellow (PN 1.0) as per EJMA 5 Nos. 18,780.00
standards and as per specs. and complete in all respect.
Size : 450 mm NB x 300 mm (L) (At delivery of VT Pump, 1 No.
befeore sump I/L Flow meter)
3.1.2 Item Description as per 3.1.1 and of following size complete in all 1 No. 37,560.00
Size : 700 mm NB x 300 mm (L) (At Header )
4.1.1 MS PIPES & SPECIALS: 1 RMT 1,465.00
Supply, Gas cutting of pipe, Fabrication, welding, Installation,
testing and commissioning of MS pipe & Specials, reducer,
expander, bend, Y-Joint, TEE etc. conforming to IS 3589 & flanges
confirming to IS 6392-PN-1.0, fabricated from MS. plate with
necessary supports & anchoring. Pipe fabricated from MS plate.
(Excluding supply of flange) as per specs. and complete in all
Size: 168.3 mm OD x min. 4.5 mm Thk (For AV)
4.1.2 Item Description as per 4.1.1 and of following size complete in all 16 RMT 6,801.17
Size : 457 mm OD X min. 8.0 mm Thk (for delivery line)
4.1.3 Item Description as per 4.1.1 and of following size complete in all 25 RMT 10,454.08
Size : 711 mm OD X min. 8.0 mm Thk (for Header )
4.2.1 Supply, Welding, Installation, Testing & Commissioning of MS flat 1 No. 1,180.00
machined faced flanges confirming to IS 6392 & drilled as per IS-
1538 with drilling off centre bolt holes and flange thickness as per
PN 1.0 including cutting & welding.
Size : 150 mm NB - Drilled (for Air Valve on Header Line)
4.2.2 Item Description as per 4.2.1 and of following size complete, 4 Nos. 4,000.00
Size : 450 mm NB (Drilled) - or actual VT pump del. Size
4.2.3 Item Description as per 4.2.1 and of following size complete, 8 Nos. 4,000.00
Size : 450 mm NB (Drilled)
4.2.4 Item Description as per 4.2.1 and of following size complete, 5 Nos. 7,450.00
Size : 700 mm NB (Drilled) - At Header
4.2.5 Item Description as per 4.2.1 and of following size complete in all 1 Nos. 13,820.00
Size : 700 mm NB- Drilled Blind
Item Qty. Unit Rate in Rs. Amount in Rs.
4.3.1 Flanged Joints of Pipes, Fittings and Specials: 4 Nos. 2,131.00
Supply, Installation, Making of Flanged CI / DI / MS / GI Pipes,
Fittings and Specials Joints with all jointing materials, rubber
packing, nut bolts, labour etc. complete the work in all respects.
Size: 450 mm dia
4.3.2 Item Description as per 4.3.1 and of following size complete in all 2 Nos. 3,988.00
Size: 700 mm dia
5.1.1 Providing, Supply of Structure Steel at site of work with freight, 2,000 kg. 64.84
loading, unloading carting, etc. including all taxes and duties
complete such as joints, channels, angles, Iron Rails,
ISA/ISMC/ISMB/MS flat, Plates, Chequered plates (min. 8mm
thickness) for cable trench etc. required for support structure of all
Electro-mechanical equipment, piping, etc. for support on floor / wall
/ beam / brackets etc. as per tender and IS.
5.1.2 Labour Charges for lowering, laying, Fixing with fabrication 2,000 kg. 11.37
various size section of MS such as joints, channels, angles, Iron
Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered plates, for cable
trench etc Complete with two coats of red oxide and two coats of
approved colour shade of epoxy paint as per relevant IS and as per
6.1.1 SITC of Single girder type E.O.T. crane with electrically operated 1 Set 5,30,250.00
hoist, class II duty, geared travelling trolly with lift as specified here
below complete with long travel rail track (40 sq.mm. bar), moving
or cross girder, all three motions electrically operated by suitable
rating motor IP54, control panel, & down pendant control block,
brake, safety device, cables from motor to starter panel & other
required accessoaries & manufactured and tested as per IS-807, IS-
3938 & IS-3177, class-II, complete as per IS & Specifications.
Capacity: min. 5 Ton, (at Pump house - For VT Pump lifting)
Lift: 12.0 m or (or as per site req.)
Span: Approx. 8.3 m (or as per site req.)
Bay length: App. 21.0 m (or as per site)
Note: Minimum as specified capacity or higher as per requirement
such that EOT crane capacity is min.1.25 times of the pump /motor
OR single heaviest component to be lifted within pump house.
Item Qty. Unit Rate in Rs. Amount in Rs.
7.1.1 SITC of Electrically Operated Chain Hoist & Electrically 1 Set 3,29,650.00
operated Trolley, suitable to operate on Mono Rail Girder having
motorised motion in vertical lifting & cross travel, manufactured as
per IS:6547-1972-Class-II & IS-3177- Class-II, complete with
electrically operated chain hoist & Electically operated geared
trolley, brake, chain-gear, motors, safety device, pendant push
button, starter panel, cables from motor to starter panel and all other
required accessories like limit switches, panel, power supply system
(Fastoon cable type), fasteners, epoxy painting, etc. tested for over
load as per IS complete as per specifications and complete in all
Capacity : 3 Ton. Min. (At Chlorination Room)
'Lift : 5.00 m as mini. or as per site req.
Bay Length : 7.00 m min. or as per site req.
(w/o MONORAIL GIRDER & MS supporting structure)
Note: (1) Minimum as specified capacity or higher as per
requirement such that ECH capacity is min.1.25 times of the
pump/motor OR single heaviest component to be lifted within pump
8.1.1 SITC of Electric Actuator operated C.I. Sluice Gate conforming 2 Set 6,61,960.00
to AWWA C 501 or IS : 13349 - 1992, Class - 1 with rising spindle,
single faced, wall thimble mounted, handwheel, flange back frame,
head stock, Spindle with supports brackets having length as specified
or to suit site condition, suitable for seating as well as unseating
water head, complete in all respect.
Size : 900 mm x 900 mm - approx. 5.75 m spindle length (At
Suction pit I/L) - Flush Bottom or suitable Closing
Item Qty. Unit Rate in Rs. Amount in Rs.
9.1.1 CHLORINATION SYSTEM 2 Plant 2,10,642.00
SITC of Wall mounted, FRP cabinet type, Vacuum operated Chlorination
plants complete in all respects with required piping, fitting, valves, safety
and testing kit, etc. Complete system combining the Two plants complete
in all respect as per IS and as per specification. (Without Chlorine
Capacity: 5 kg/hr. (Cabinet Type) for each plant.
Each plant shall include the followings:
(1) 1 No. Submersible monoblock Pump motor set with continuous Cable
from pump to starter panel without any Joint with proper conduit piping
(2) 1 No. Diffusers (3) 1 No. Ejector (4) 1 No.Chlorinator, (5) 1 No.
Vacuum Regulators (6) 1 No. Strainer (7) 1 No. NRV on solution line (8)
1 No. Non Return Valve on Booster Pump del. line (9) 1 No.Yoke clamp
(1 No. for each Tonner) (10) 1 No. Pressure Gauge with require piping
and isolation valve for booster pump (11) 1 No. Chlorine Gauge at Cl2
manifold with isolation valve (12) 1 Lot of piping, fittings, valves &
instruments (13) Total 5 nos. or higher as required Isolation valve on gas
manifold (14) Vacuum Gauge (15) MS support of 50 mm x 50 mm x
(1) Filled 900 kg. Chlorine Tonner in the scope of Client.
(2) 1 no. Gas filter shall be provided per manifold.
(3) 1- lot inter connecting piping of identical pipe size of Cl2 booster
pumps delivery line with required no. isolation valves.
(4) 1 no common 3/4" gas manifold of Carbon steel suitable for two
(5) Any other as required to complete the work in all respects.
9.1.2 AUTO SHUT OFF CHLORINE TONNER VALVE SYSTEM 1 Set 8,68,200.00
SITC of Automatic Chlorine Tonner shut off valve of 900 Kg for
single chlorine Tonner for chlorination system comprising of :
(1) 1 No. Pneumatic Auto shut off chlorine Tonner route valve with
actuator system with Air line filter, Solenoid Valve, Air motor, Yoke
clamp, etc. of required capacity, size, rating.
(2) 1 No- Air Compressor
(3) 1 No-Chlorine leak detector of 0-10 ppm capacity
(4) 1 No. Industrial Hooter
(5) 1 Lot-Air piping min. uPVC-SCH 40 for Auto Shut off valve as
(6) 1 Lot- MCC cum PLC with HMI Based Control panel consisting
of minimum 32A, 4Pole MCCB for incoming power supply, starter
for Air compressor as per type-2 cordination chart, min. 32A 4P
MCB power feeder for each booster pump, Wall /stand mounting
booster pump starters as required etc. complete in all respect.
(7) 1 Lot- Interconnecting Electrical & Instrument Power, control &
other required cables, cable tray, earthing etc with required
accessories to complete the system in all respect.
Item Qty. Unit Rate in Rs. Amount in Rs.
9.1.3 Supply of safety kit & testing as specified in the specifications. 1 Set 83,241.00
(1) 1 Set Chloroscope,
(2) 1 set. Air breathing apparatus for 45 min as per IS,
(3) 1 set. Emergency tool kit,
(4) 1 No. Amonia Torch, etc.
Electrical Work
1.1 ELECTRICAL WORKS 1 Set 1,20,663.00
11 kV SWITCHYARD / TWO POLE (DP) STRUCTURE:
Supply, Installation, Testing and Commissioning of 11 kV, 3 Phase, 50 Hz,
Two Pole Structure made of 6" X 3" 'I' section girder having min. 9mtr.
length, 4" X 2" M.S. channels, angles, clamps, nuts, bolts, stay wires
including earthing system etc. suitable for erection of following / indicated
accessories duly connected with ACSR conductor as per approved drawings
& in compliance with requirements of IS/IEC / Power Supply Co.:
(a) 11kV 200A DO (drop out) fuses with S.R.B.P. tubes carries (03 nos.)
(b) 11kV 400A G.O.D. switch complete with insulators, operating handle
with galvanized pipe, square bar etc. (01 set)
(c) 11kV lightning arrestors with clamps (03 nos.)
(d) 11kV shackle (Disc/Pin/Post) as required insulators (06 nos.)
(e) ACSR Dog Conductor (mini. 30Mt.)
(f) 11 kV fiber operating rod
(g) 20 mm dia. GI stay sets (2 sets), required foundation etc.
and to be painted with two coat of red oxide and final two coat of Aluminium
paint at site as per IS.
1.2 H.T. INDOOR SWITCH GEAR PANEL 1 Set 15,68,025.00
SITC of 11 kV, 500 MVA, 630A, Indoor, Extensible type,
Horizontal draw out, Motorised spring charging mechanism,
breaker Vacuum Circuit Breaker Panel (1 No. Incomer +
Nos.outgoing), with EC grade copper busbars along with required
Resin cast CT Dual primary & secondary, Cl: 0.5/5P10, 15VA,
Digital MFM with RS 485 with 3 Line Display, Class-0.5s and PT
(dual secondary) Cl:0.5/3P, min 200VA or higher for metering and
protection, 110V DC power pack for incoming & outgoing feeder,
Annunciator, Hooter, Indicating lamps, Numerical Protection relay
(Current & Voltage Based) with RS 485 with combined protection
for 3O/C+1E/F, S/C, Under & Over Voltage, Transformer Protection
Aux. relay etc. High speed tripping relay, Trip ckt supervision relay,
Fuse failure relay, Digital Power factor meter, Ammeter, Voltmeter
(Only I/C), A/M switch suitable for PLC/SCADA etc. complete in
all respects as per IS, Specification.
1.3 SITC of H.V. CABLES 120 Mtr. 2,615.90
SITC of 11 kV (E), 3C x 240 sq.mm., Aluminium, extruded
innersheath, Armoured, XLPE , H.V Cable as per IS 7098 (part 2)
and Tech. Specification. (DP Structure to HT Panel, HT Panel to
1.4 SITC of the Indoor Heat shrinkable Termination: 5 Nos. 4,798.00
SITC of Indoor H.T. cable end terminations Kit for 11 kV (E), 3C
x 240 sq.mm. XLPE armoured cable with all accessories as required.
1.5 SITC of the Outdoor Heat shrinkable Termination: 3 Nos. 6,763.00
SITC of Outdoor H.T. cable end terminations Kit for 11 kV (E),
3C x 240 sq.mm. XLPE armoured cable with all accessories as
Item Qty. Unit Rate in Rs. Amount in Rs.
2.1 DISTRIBUTION TRANSFORMER 2 Nos. 36,76,840.00
SITC of 800kVA, 11/0.433 kV, Outdoor Transformer continuously
rated, 3-phase, 50 Hz, OFF Load Tap Changer, OCTC, ONAN
cooled, copper double wound core type, vector group Dyn11,
Delta(HT)/Star(LT), Oil immersed winding with temperature rise in
oil / winding 40/45 deg.C above design temperature with neutral
brought out to connect to separate earthing including Terminal
arrangement bushing / cable Box on HT side and cable Box on LT
side, first fill of oil along with Fittings & accessories as per Energy
efficiency Level-2 of IS:1180 (Part-1):2021 and its latest
ammendments and as per Tender Specification.
Note: Transformer shall be suitable for parallel operation.
Minimum requirement shall be as below:
Both transformer shall have " Identical X/R ratio, phase angle shift,
polarity, phase sequence, frequency, position of tap changer. Turns
ratio & voltage ratio".
2.2 Casting of transformer new plinth / foundation including design as 2 Set 40,000.00
per transformer full total weight load capacity / Transformer vendor
recommendation / requirements. Top of transformer foundation shall
be mini. 600mm above finished ground level & two nos. padestal
foundation of size minimum 1.2m x 1.2m each or higher as per
vendor / statutory / electrical inspector requirements with situ
reinforced cement concrete in M 20 using granite, quartzite trap
metal of size 6 mm to 20 mm for RCC work including providing of
53 grade cement & Fe 415 grade TMT bars, scaffolding, centering,
form work, curing etc. complete in all respect to install new
2.3 (a) Supply and levelling of Switchyard & transformer yard using gravel, 110 Sq.m. 340.00
fine sand and other required filing material, enmarked for the
Switchyard & Transformer yard including removing of trees or
boulders etc. if any. The general level of the yard shall be at a
convenient level for movement of man and material and it should
match with FGL and as per Specification and Drg.
2.3 (b) Supply and Installation of GI Chain link fencing frames with L 50 RMt. 1,060.00
angle/Channel post around Switchyard & Transformer yard etc. as
per Specification and Drg.
2.3 (c) SITC of 3.0 mtr wide gate with GI chain link as per Specification 3 Nos. 10,660.00
Item Qty. Unit Rate in Rs. Amount in Rs.
3.1 LOW VOLTAGE (LT) PANEL BOARD (PMCC) : 1 Set 50,69,800.00
SITC of PMCC Panel (50kA), compartmentalised, floor mounted,
operating height maximum 1800/1900 mm, Extensible on both ends,
suitable for Manual & Auto operation -Local & through PLC/SCADA
operation as per site conditions complete in all respects as per Tender
SLD / Specification / IS and including following as minimum:
(1) INCOMER 1&2: FP, 1250A, 50 KA Microprocessor EDO ACB
LSIG with inbuilt RS 485 MODBUS communication with Digital
Voltmeter with VSS, Digital Ammeter with ASS, Resin Cast CT-Cl :
0.5,10VA, Digital MFM with RS 485 with 3 Line Display Cl. 0.5,
Breaker Control Switch (TNC), A/M switch, Indicating lamps, Push
bottons etc,. with electrical & mechanical interlocking between Incomers
and buscoupler.
(1.1) Surge protection device, 3P + N, Type 2 for lightning/surge
protection. Load sensing CT in Incomer & Busbar for APFC Panel, Cl.-
0.5. Constant voltage/control voltage transformer 1500VA, 415V/230V
AC, with tapping +/-5% in steps of 2.5%, 32A DP MCB & 25A Power
(2) BUS-COUPLER: FP 1250A ACB (same as per Incomer)
(2.1) 2000A TPN, EC grade AL Main busbars. (Busbars size as per
50KA fault level and Temperature rise with current density
(3) TRANSFORMER FIXED COMPENSATION FEEDER (25
KVAr): 2 Sets: Each comprising of 63A FP Thermal Magnetic MCCB,
Ind. Lamp, with Capacitor duty contactor, ON Delay timer, individual
MCCB/MCB as per Tender SLD.
(4) DG Incomer: FP, 2000A, 50 KA Microprocessor EDO ACB LSIG rate incl in above
with inbuilt RS 485 MODBUS communication with Digital Voltmeter price
with VSS, Digital Ammeter with ASS, Resin Cast CT-Cl : 0.5,10VA,
Digital MFM with RS 485 with 3 Line Display Cl. 0.5, Breaker Control
Switch (TNC), A/M switch, Indicating lamps, Push bottons etc,. with
electrical & mechanical interlocking between Mains and DG set.
(5) 260 KVAR APFC POWER FEEDER: 2 NOS:
Each feeder comprising of 630A TPN TM ACB, 50kA with with
Digital Ammeter, ASS, CT, Breaker Control Switch (TNC), A/M switch,
Indicating lamps, etc.complete in all respects.
(6) 250 KW Motor-Soft Starter Feeder(For VT pump)- 4 Nos.
Each feeder comprising of Soft Starter with Internal/External bypass
contactor for 250 kW Motor or higher as per pump manufacturer reco.
with soft starter rating minimum (479A @ 50deg C) with suitable
derating with detachable type door mounted display key pad and with
630A TPN MP MCCB (LSIG), 550A, AC3 duty Line contactor, Semi
conductor fuse, MFM with RS-485, Resin Cast CT Cl: 0.5, SPP, Cooling
fan, Space heater, Minimum Ten-channel temprature scanner with RS-
485, A/M, L/R switch, ON, OFF, TRIP Indication &(Start & E-Stop)
pushbutton etc.
Item Qty. Unit Rate in Rs. Amount in Rs.
(7) 63A TPN TM MCCB FEEDER : 6 Nos. (1 no. EOT Crane at rate incl in above
P.H. ,1 no. for PDB, 2 no. for Chlorination system & 2nos. for price
Each feeder comprising of 63A TPN Thermal Magnetic (TM)
MCCB, with indicating lamps etc.
(8) 32A TPN TM MCCB FEEDER : 2 Nos. :(2 nos. Spare)
Each feeder comprising of 32A TPN Thermal Magnetic (TM)
MCCB, with indicating lamps etc.
(9) 63A TPN TM MCCB FEEDER FOR ALL MCB
FEEDERS: 2 sets:
Incomer: 63A TPN Thermal Magnetic (TM) MCCB, with indicating
a) 6nos. 32A 'C' curve 4P MCB feeders (for 2 nos. DG charging and
sensing, 1no. for 1no ICP/PLC Panel, 1no. Indoor LDB, 2nos. for
b) 4nos. 16A 'C' curve DP MCB feeders (For 2nos. Tr. MB, 1 no.
HT Panel., 1no. Spare)
c) 1 no. 32A 'C' curve 4P MCB with Time switch,32A contactor
4P,ON lamp feeders (for Outdoor LDB)
(10) Multiplication relay as required for dry run protection of
NOTE: 1). All MCCB shall be 50KA, Ics = 100% Icu, inbuilt
protection with adj O/L and Adj.S/c (LSIG for MP
MCCB),Extended rotary handle, Terminal spreader, Auxiliary
Change over contact and trip contact as required.2) All MFM, ACB,
Soft Starter,MPR,Temp.Scanner etc shall be with inbuilt RS
Item Qty. Unit Rate in Rs. Amount in Rs.
3.2 SITC of 260 KVAR at 415V, APFC Panel,compartmentalised, 2 Sets 8,82,336.00
Floor mounted, extensible type on both sides with Horizontal bus bar
arrangement as per site requirement & complete in all respects as per
SLD / Specification / IS and including following as minimum:
1.1 630A, TPN, 50 KA TM ACB with Digital Voltmeter with VSS,
Digital Ammeter with ASS, Resin Cast CT- Cl : 1.0,10VA, A/M,
L/R switch, Indicating lamps, Push buttons etc.
1.2 Microprocessor based APFC Relay,144sq.mm, 16 STEP with RS
485 with minimum operating current 10mA.
2. OUTGOING CAPACITOR FEEDER:
Capacitor feeder of following rating comprising of TPN
MCCB/MCB with ON & TRIP Indication, Capacitor duty
contactor,Heavy duty MPP / gas filled capacitor unit, A/M Switch,
ON Delay timer,ON / OFF Push button, ON, TRIP, Auto & Manual
Indication lamp etc. as per Tender SLD& Specification
2.1 50 KVAR FEEDER: 2 NOS
2.2 25 KVAR FEEDER: 2 NOS
2.3 20 KVAR FEEDER: 4 NOS
2.4 10 KVAR FEEDER: 2 NOS
2.5 5 KVAR FEEDER: 2 NOS
2.6.Two nos. Vacant feeder suitable for 1-50KVAr and 1-25KVAr
to be provided.
NOTE: 1. cooling/exhaust fan : Heavy duty 8" Metalic Housing
and Metal Impeller / Blade / Vanes of Minimum2nos. or higher
as required at the top of the panel with canopy/hood.
2. For Capacitors of rating ≤ 5 KVAr only, All types viz.
APP/MPP/Gas Filled are acceptable.
3.3 SITC of Lighting Distribution Board (LDB) as under: 2 Nos. 8,911.23
SITC of 3 Phase 4 Wire 4P, double door Prewired LDB each for
Indoor Lighting & Outdoor Lighting Suitable to house :
Incoming: 32A FP, ELMCB (30mA)
Outgoing: 20A SP MCB (9 nos.) & 16A SP MCB (9 nos.)
3.4 SITC of Aux-Power Distribution Board (PDB) as under: 1 No. 20,275.75
3 Phase 4 Wire TPN, 12 way Pre-wired-MOG / MOV PDB for
Auxiliary accessories Load power supply (Aux. load & Rest spare)
Incoming: 63A TPN, MCCB
Outgoing: 12 nos. 32A 4P MCB 'C' Curve (4nos. For pump delivery,
1no. for header, 2nos. for sump compartment, rest spare)
3.5 SITC of LCS pushbutton station ON & OFF (E-stop) set complete 4 Nos. 3,150.00
with Enclosure, necessary mounting/ fixing arrangement on wall /
pipe support etc. to be installed near motors for remote operation, etc.
as per IS and specifications. (including structural steel) (For Pump)
Item Qty. Unit Rate in Rs. Amount in Rs.
4.1 LOW VOLTAGE (LT) CABLES 900 Mtr. 1,635.00
Supply, laying , testing and commissioning of 1.1 kV,
A2XFY(X)/2XWY(X) XLPE insulated (IS 7098) AL / Cu stranded
conductor, Extruded inner sheath cables as per specification & IS.
The cable when laid outside the building shall be laid underground in
trench with brick & sand protection/in DWC pipes as per specified
method and shall be laid in prepared trench/ on cable tray when laid
inside the building.
SITC of 3.5C x 300 sq. mm. A2XFY(X) Cable (5R for each
Transformer-1 &2 to PMCC panel Incomer-1 &2, 2R for each
PMCC panel to APFC-1 &2, 8R for DG set To AMF Panel &
AMF Panel To PMCC panel)
4.2 SITC of 3C x 300 sq. mm. A2XFY(X) Cable (2R for each PMCC 250 Mtr. 815.00
Panel to 4nos. 250kW motor)
4.3 SITC of 4C x 6 sq. mm. A2XFY (X) Cable (For 1 no. Indoor LDB, 150 Mtr. 144.43
1 no. Outdoor LDB, 1no. For PDB panel, 1 no.for EOT Crane at
4.4 SITC of 4C x 2.5 sq. mm. 2XWY(X) Cable (4 nos. MOV at pump 720 Mtr. 317.14
Delivery, 1 no. MOV on header, 1 no.for ICP, 2nos. For sump
compartmnet , 2 Nos. MOV at ESR Inlet & 12 nos.for street light)
4.5 SITC of 2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For 2 100 Mtr. 207.05
nos. Tr. Marshalling Box, 2 nos. APFC CT)
4.6 SITC of 5C x 2.5 sq.mm. 2XWY(X) Cable (For Pump-Motor LCS) 100 Mtr. 220.00
4.7 SITC of 10C x 2.5 sq.mm. 2XWY(X)Cable (2 Run Tr. to HT Panel 100 Mtr. 510.00
4.8 SITC of 12C x 1.5 sq.mm. 2XWY(X) Cable (4nos. MOV at pump 300 Mtr 370.00
Delivery, 1 no. MOV on header, 2nos. For sump compartmnet)
4.9 SITC of 10Triad x 1.0 sq.mm. individual triad and overall shielded 100 Mtr. 620.00
with aluminum mylar tape Signal Cable for RTD (winding &
Bearing ) of motor.
5.1 CABLE END TERMINATION AND CONNECTION: 60 Nos. 976.00
SITC of Double compression Ni-Plated brass cable glands and
crimping type Bimetallic lugs / sockets with necessary tools and
equipment's as specified in specifications and IS. The glands and
lugs / sockets shall be suitable for cable size and type mentioned
below & as per specifications.
1) Earthing the glands and armouring with earthing clamp and
jumper and also connecting to common earth bar.
2) The job also includes, if necessary, supply & fixing of extension
busbar of same material on MCCB or panel board terminal /
connector to connect more than one no. of parallel cables or to
connect higher size cable to lower size unit. The job also includes
earthing the glands and armour of the cable with common earth bar
or flexible copper mesh.(Cable termination qty. shall be as per site
SITC of 3.5C x 300 sq. mm. A2XFY(X) Cable (5R for each
Transformer-1 &2 to PMCC panel Incomer-1 &2, 2R for each
PMCC panel to APFC-1 &2, 8R for DG set To AMF Panel &
AMF Panel To PMCC panel)
Item Qty. Unit Rate in Rs. Amount in Rs.
5.2 3C x 300 sq. mm. A2XFY(X) Cable (2R for each PMCC Panel to 16 Nos. 960.00
4nos. 250kW motor)
5.3 4C x 6 sq. mm. A2XFY (X) Cable (For 1 no. Indoor LDB, 1 no. 8 Nos. 111.00
Outdoor LDB, 1no. For PDB panel, 1 no.for EOT Crane at Pump
5.4 4C x 2.5 sq. mm. 2XWY(X) Cable (4 nos. MOV at pump 44 Nos. 73.73
Delivery, 1 no. MOV on header, 1 no.for ICP, 2nos. For sump
compartmnet, 2 Nos. ESR Inlet & 12 nos.for street light)
5.5 2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For 2 nos. Tr. 8 Nos. 55.55
Marshalling Box, 2 nos. APFC CT)
5.6 5C x 2.5 sq.mm. 2XWY(X) Cable (For Pump-Motor LCS) 8 Nos. 180.00
5.7 10C x 2.5 sq.mm. 2XWY(X)Cable (2 Run Tr. to HT Panel control 8 Nos. 240.00
5.8 12C x 1.5 sq.mm. 2XWY(X) Cable (4nos. MOV at pump Delivery, 14 Nos. 250.00
1 no. MOV on header, 2nos. For sump compartmnet)
5.90 10Triad x 1.0 sq.mm. individual triad and overall shielded with 8 Nos. 280.00
aluminum mylar tape Signal Cable for RTD (winding & Bearing ) of
6.1 CABLE TRAY 150 Mtr. 818.10
SITC of G.I. (hot dip galvanised ) Ladder type medium duty (2mm
thick) Cable Tray with necessary bends, tees, reducers, covers and
clamps for fixing. All material shall be Hot dip galvanised. All
hardware shall be Electro-galvanized/ SS 304 complete in all
respects as per Specification. And including all accessories.
600 x 100 mm - Ladder type
6.2 300 x 100 mm - Ladder type 150 Mtr. 656.50
6.3 150 x 50 mm - Ladder type 250 Mtr. 328.25
6.4 Supply, laying and erection of 125 mm (ID) approved make 100 Mtr. 325.00
Double Walled Corrugated pipes (DWC) of polyethelene
(confirming to IS-14930 II) with necessary connecting accessoies of
same material at required depth for laying of cable below ground /
road surface for enclosing cable and back filling the same to make
ground as per original. (For HT cable).
6.5 Supply, laying and erection of 75 mm ID approved make Double 100 Mtr. 144.00
Walled Corrugated pipes (DWC) of polyethelene (confirming to IS-
14930 II) with necessary connecting accessoies of same material at
required depth for laying of cable below ground / road surface for
enclosing cable and back filling the same to make ground as per
original. (LT cable etc)
6.6 Making Trench/ excavation in soft soil of suitable width and of 100 Mtr. 54.54
depth (minimum 750mm depth (LT) & 1000mm for HT) for laying
cable/ DWC pipe and back filling the same and making the surface as
normal ground as per IS & Ternder Specification/Drg. (For laying of
Item Qty. Unit Rate in Rs. Amount in Rs.
6.7 Cable Protection/ Covering in Trench: Cable Covering with 50 Mtr. 157.56
second class bricks or cement tiles laid cover the cable (top) & also
on both side with sand bedding/cusioning of 75mm.& covering of
150mm Layer of sand above cable (16 bricks per meter.) as per IS
& Tender Drg/ Specification. (For HT/LT cable protection)
complete in all respects as instructed by EIC.
7.1 CHEMICAL EARTHING SYSTEM 14 Set 12,498.75
SITC of Maintenance free chemical earthing (copper) with earthpit
of minimum bore size dia. 225mm Safe Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec.
made of corrosion free Pipes having Outer pipe dia of 48 mm
having 250 Micron copper plating, Inner corrosion free Hot dip
galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat
strip type connection terminal 14mm dia with constant ohmic value
surrounded by highly conductive corrosion resistant chemical
compound with high charge dissipation suitable for electrical
installation & of 3Mtr. length of Pipe with two nos. 25Kg. bag of
Back filling compound.. (2nos. for each of DP structur-1 &2 LA, HT
Panel, Neutral of Tr.-1&2, 2nos. for DG set,2 nos. for ICP earthing,)
NOTE: Earthing Resistance value & date shall be painted on the
7.2 SITC of Maintenance free chemical earthing with earthpit of 16 Set 8,370.88
minimum bore size dia. 225mm Safe Earthing Electrode consisting
Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of
corrosion free Hot dip Galvanised (min 150 Microns) Pipes having
Outer pipe dia of 76 mm , Inner corrosion free Hot dip galvanised
(80 to 100 micron) pipe dia of 26 mm with copper flat strip type
connection terminal 14mm dia with constant ohmic value surrounded
by highly conductive corrosion resistant chemical compound with
high charge dissipation suitable for electrical installation & 3Mtr.
length of Pipe with two nos. 25Kg. bag of Back filling compound.
(2nos. for each for DP structur-1 &2 body, Tr.-1&2, 2nos. for DG
set, 2nos. for LT Panel & 4nos. for grid earthing & all elect.
NOTE: Earthing Resistance value & date shall be painted on the
7.3(a) SITC of 50mm(w) x 8mm(T) etc. sizes as required, HOT dip 1248 Kg. 90.90
galvanized GI Strip including supply & fixing using GI spacers,
saddles when laid inside the building and inclusive of excavation &
refilling of earth when laid outside the building & interconnection
with earth pit & all electro-mechanical equipments.
(50X8 G.I Strip wt.3.12 kg/m, 3.12x400Mt.=1248kg.)
7.3(b) SITC of 25mm(w) x 3mm(T) etc. sizes as required, HOT dip 210 Kg. 90.90
galvanized GI Strip including supply & fixing using GI spacers,
saddles when laid inside the building and inclusive of excavation &
refilling of earth when laid outside the building & interconnection
with earth pit & all electro-mechanical equipments. (25X3 G.I Strip,
Item Qty. Unit Rate in Rs. Amount in Rs.
7.3(c) SITC of 40mm(w) x 6mm(T) etc. sizes Copper Strip including 263 Kg. 937.28
supply & fixing of bolts, saddles when laid inside the building and
inclusive of excavation & refilling of earth when laid outside the
building & interconnection with earth pit & Tr. nutral. (40X6 Cu.
Strip, 1.88 Kg/m, 1.88 x 140mtr.=263.2Kg.)
Copper Bolt,Nuts ,Washers shall be used for Connecting Earth
electrode to individual eqp. Bitumen shall be used at the place of
7.3(d) SITC of 25mm(w) x 3mm(T) etc. sizes Copper Strip including 38 Kg. 601.69
supply & fixing of bolts, saddles when laid inside the building and
inclusive of excavation & refilling of earth when laid outside the
building & interconnection with earth pit & PLC Panel (25X3 Cu.
Strip, 0.761 Kg/m, 0.761 x 50 mtr.=38.05Kg.)
Copper Bolt,Nuts ,Washers shall be used for Connecting Earth
electrode to individual eqp. Bitumen shall be used at the place of
joint/welding. (For PLC Panel to Earthing)
7.3(e) SITC of HOT Dip Galvanized iron strip wire 8 SWG (For LDB, 41 Kg. 90.90
PDB, LCS,Street light pole earthing etc.)
(8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 400Mt.=41.2)
8.1 INTERNAL WIRING 150 Mtr. 90.90
SITC of Mains & outlet points wiring with 1.1 kV grade FRLS PVC
insulated ISI marked flexible stranded copper conductor wires with
medium class min. 25mm. dia. Rigid PVC pipe and accessories to be
erected concealed in / to be run on surface / wall / ceiling with
following sizes as mentioned below. The unit rate wirings shall be
with connector, PVC junction box, wires, holder, ceiling rose, angle
holder, switch, sockets, switch board, brass chromium / cadmium
plated machine screws, phase and neutral wires, green Earth
continuity wires etc. as required to complete wiring from LDB panel
to the final outlet termination points. The wiring shall be as per
IS:732, IS:4648 and as per tender specification / IS.
(a) SITC of Mains wiring with 3 wire 1.5 sq.mm.
8.2 As per above but (b), SITC of Mains wiring with 3 wire 2.5 sq.mm 250 Mtr. 113.12
as per tender specification & IS.
8.3 As per above but (c ), SITC of Mains wiring with 4 wire 1.5 sq.mm 200 Mtr. 102.01
as per tender specification & IS.
8.4 As per above but (d), SITC of Mains wiring with 4 wire 2.5 sq.mm 300 Mtr. 141.40
as per tender specification & IS.
8.5 SITC of Point wiring for Light / fan / Bell / Primary Point with 65 Nos. 387.84
2nos. 1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI
marked 1.1 kv grade FRLS PVC insulated multistrand copper wires
pipe to be erected concealed in flushed on wall / ceiling, complete
with 6A Tissino Type ISI marked flush type switch / bell push &
accessories erected on metal / PVC Box covered with 3 mm thick PC
(Polycarbonate) / Acrylic sheet with necessary lamp holder / ceiling
Rose / H. D. connector as directed with medium class Rigid PVC
pipe & accessories.
Item Qty. Unit Rate in Rs. Amount in Rs.
8.6 SITC of 6A independent Plug with 2nos. 1.5 sq.mm Cu. Mains size 6 Nos. 341.38
wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked
KV grade FRLS PVC insulated multistrand copper wires with
medium class Rigid PVC pipe and accessories to be erected on wall /
ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type
switch erected with earth continuity connection erected on Metal /
PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet.
8.7 SITC of 6/16A independent Plug with 2nos. 4 sq.mm Cu. Mains size 6 Nos. 671.65
wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked
KV grade FRLS PVC insulated multistrand copper wires with
medium class Rigid PVC pipe and accessories to be erected on wall /
ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type
switch erected with earth continuity connection erected on Metal /
PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet.
8.8 SITC of Single Phase 20A 3 Pin Matal clad Industrial Type 4 Nos. 820.00
Socket with plug top and 20A SPMCB, suitable for flush
mounting, in 16 SWG MS box of suitable size and covered with
mm thick electrical grade hylam sheet or eqivalent ISI marked
Electrical grade bakelite sheet and earthing with 2.5 sq.mm insulated
copper wire run inside the conduit including interconnections etc.
complete as required.
8.9 SITC of One 300/380 mm dia. Ex fan 16A independent Plug point 10 Nos. 671.65
near Ex. Fan with 2nos. 4 sq.mm Cu. Mains size wiring & earthwire
of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS
PVC insulated multistrand copper wires with medium class Rigid
PVC pipe and accessories to be erected on wall / ceiling, complete
with ISI marked 3Pin socket and tissino type switch erected with
earth continuity connection erected on Metal / PVC box covered
with 3 mm thick PC(Polycarbonet) / Acrylic sheet. Plug point shall
be near Ex.Fan.
8.10 SITC of 380mm sweep 1400 R.P.M exhaust fan, capacitor type, 8 Nos. 3,636.00
having double ball bearing, M.S.blades, mounting frame, forearms,
suitable to operate on 230V,50 HZ AC supply conforming to IS:
2312.Fan shall be painted with epoxy grey colour controlled by one
6 A flush type switch on board and 6A plug point near Ex. fan.
8.11 SITC of 300mm sweep 960 R.P.M exhaust fan, capacitor type, 2 Set 1,883.65
having double ball bearing, M.S.blades, mounting frame, forearms,
suitable to operate on 230V,50 HZ AC supply conforming to IS:
2312.Fan shall be painted with epoxy grey colour controlled by one
6 A flush type switch on board and 6A plug point near Ex. fan.
8.12 SITC of Sheets steel powder coated weather proof enclosure with 1 Nos. 909.00
One no. 32A, 415V 4P MCB for Motor & Inductive load (C Curve)
having 10 KA breaking capacity & confirms to IS:
Item Qty. Unit Rate in Rs. Amount in Rs.
9.1 LED LIGHT FIXTURES & LIGHTING: 30 Nos. 348.45
SITC of Indoor wall mounting 20Watt or up to 25% higher
wattage LED 4 feet Tube Light indoor fittings with LEDs of
wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with
housing used as a heat sink shall be made of thick sheet Steel
conforming to IS: 513/CRCA polyester powder coated and high
U.V. & corrosion resistance with diffuser and/or Polycarbonate
optics with company mark/name
120 to 300 V,Power Factor more than 0.9, THD < 10 %,
CCT 4000 K to 6500K, Uniformity ratio >0.7,
Luminaire efficacy> 85 lumens/watt
LED driver efficiency > 85 %
(Each fitting required LM-79 & LM-80 Certificates)
Tube Light with integral / non-integral driver, Surge-4KV,IP-
20, 4 feet, Cat-III
(20nos. for LT Room cum pump house, 3nos. HT room, 3nos. Office
room, 4nos. for chlorination room)
9.2 Item description as per Sr. No. 8.1.1 SITC of 7 watts LED Lamps 6 Nos. 131.30
integral type,cool white with PC diffuser suitable for B22 LAMP
9.3 1200mm sweep ceiling fan, capacitor type, having double ball 4 Set 1,883.65
bearing 450mm down rod, canopies, shackle, rubber bush, blades,
electronic speed regulator, suitable to operate on 230V,50Hz AC
supply conforming to IS: 374/1979.Fan shall be painted with white
9.4 SITC of 40W LED Surface / Wall mounted LED Flood Light 10 Nos. 6,127.67
fittings with High power White LEDs wattage of 1Watt and above
assembled on single MCPCB, efficiency more than 130 lm/w and
corrosion free High pressure die cast aluminum housing with smooth
finish powder coated and heat sink extruded aluminium with diffuser
and Polycarbonate optics/ lenses with company mark/name engraved
120 to 300 V,Power Factor more than 0.95, THD < 20 %, CCT
Uniformity ratio >0.45, Luminaries efficacy> 85 lumens/watt . LED
driver efficiency > 85 %.
( Each fittings required LM-79 & LM-80 certificates)
(IP-65), Surge -4KV Cat-III
For Indoor use: (Pump House)
9.5 SITC of 'B' class galvanised iron pipe 32 mm outside dia 45 cms 25 Nos. 656.50
long duly welded on 20 cms x 20 cms x 3 mm thick M.S. base plate,
erected on wall or corner for mounting luminaire with necessary
hardware materials duly painted for wall mounting indoor flood
light fixtures on Wall of Buildings & post top lantern.
Item Qty. Unit Rate in Rs. Amount in Rs.
10.1 EXTERNAL LIGHTING (Flood LIGHT): 15 Nos. 7,183.12
SITC of 70W LED Wall mounted LED Flood Light fittings with
High power White LEDs wattage of 1Watt and above assembled on
single MCPCB, efficiency more than 130 lm/w and corrosion free
High pressure die cast aluminum housing with smooth finish powder
coated and heat sink extruded aluminium with diffuser and
Polycarbonate optics/ lenses with company mark/name engraved or
120 to 300 V,Power Factor more than 0.95, THD < 20 %, CCT
Uniformity ratio >0.45, Luminaries efficacy> 85 lumens/watt . LED
driver efficiency > 85 %.
( Each fittings required LM-79 & LM-80 certificates)
(IP-65), Surge -4KV Cat-III
For Outdoor use:
11.1 EXTERNAL LIGHTING (STREET LIGHT): 12 Nos. 12,598.74
SITC of Street Light Pole, steel tubular swaged type, 7.5 meter long
with single arm & M.S.base plate with pipe cap and over hung 1.5 m
long having dia to suit the socket of 240V LED street light fixtures.
Street light pole unit rate shall be with (i) IP 65 SMC box of size
x 15 x 15 cms. with MCB & terminal strip inside the box with
hinged/sliding door (ii)50mm dia, B class GI pipe bracket
min.1.5mtr long for Incoming & outgoing cable (iii)MS Cable Clamp
of 25 x 3mm (iv)SITC of 1.5 Mtr.single Arm bracket of medium
duty MS pipe of 4.2 cms. Out side dia complete with suitable sleeve
tubing 45 cms. long of required size of pole top etc. and having
spread of 1.5.mtr. length with 110 deg.(v) Complete painted with one
coat of Red oxide / PU base primer and two coats of Aluminium / PU
paint for Pole,Arm, pipe etc.
11.2 SITC of 70W LED Street light fittings with High power White 12 Nos. 7,050.81
LEDs wattage of 1Watt and above assembled on single MCPCB,
efficiency more than 130 lm/w and corrosion free High pressure die
cast aluminum housing with smooth finish powder coated and heat
sink extruded aluminium with diffuser and Polycarbonate optics/
lenses with company mark/name engraved or embossed
120 to 300 V,Power Factor more than 0.95, THD < 20 %, CCT
Uniformity ratio >0.45, Luminaries efficacy> 85 lumens/watt . LED
driver efficiency > 85 %.
( Each fittings required LM-79 & LM-80 certificates)
Street Light (IP-65), Surge -4KV, 70 watt Cat-III
11.3 SITC of M-20 / 1:2:4 cement concrete foundation for Street light 12 Nos. 1,525.10
pole & 70 % PCC from bottom including excavation for the pole of
size 60 x 60 x 120 cms. Deep in below ground level with plinth of
cms x 45 cms(or 45 cms dia x 45 cms) high upper ground level with
necessary curing and finishing in approved manner.
Item Qty. Unit Rate in Rs. Amount in Rs.
12.1 DIESEL GENERATOR SET 1 Set 1,02,69,790.00
SITC of 1250kVA (Latest CPCB Norms) at 415 V, 50 Hz, 3 Phase,
wire Prime power rating Diesel Generating Set at design temperature at
40°C and 0.8 PF,complete with necessary controls and safety devices
confirming to relevent ISS/BSS with latest amendements. Diesel Engine
shall be suitable for continuous operation of generator set duty inclusive
of fly wheel, air cleaner, radiator. fan with guard, fuel pump, fuel filter,
Electronic governor, auto main fail electrical starting starter system, 12V
battery, off line battery charger, Advanced digital controller, voltage
regulator, instrument panel, Hospital Grade type Exhaust silencer,
suitable capacity fuel tank, protections against low lubrication oil
pressure, high water temperature.
Alternator shall be 415V, 3 phase, 50 Hz, 4 wire, 0.8 power factor,
Insulation Class-H with temperature rise limited F, self regulated,
brushless type, drip proof confirming to IS:4722 with latest amendments.
The engine and alternator shall be coupled over a sturdy common base
frame. Floor mounted,dust & vermin proof, indoor type, dry type air
filter etc. as per tender specification and complete in all respect as
12.2 SITC of AMF panel with all required metering suitable for above rating 1 Set 4,43,760.00
dg set,3 phase, 415V, AC diesel generating sets complete scope as
detailed below:
Panel shall be Floor mounted, dust & vermin proof, indoor type Panel
shall be consisting of 2000A 4P Microprocessor with LSIG EDO ACB
with Electronic AMF Logic relay (Nb2 or Equivalent) with minimum
functions as per specification i.e 3Line Display MFM, digital voltmeter,
Ammeter, Power factor, frequency, hour meter, Emergency Stop PB,
CTs, with Indication, Alarm & Trip Annunciation as per specification,
Selector switch etc.complete other accessories as per specification and
complete in all respect as required.
13.1 SAFETY ACCESSORIES 6 Nos. 10,231.30
SITC of following safety accessories complete with necessary fixing
brackets, other accessories and tools etc. as required to complete the
Supply & Erecting carbon dioxide (CO2) fire extinguisher of 6.5kg
capacity with necessary clamps made from 50 x 6 mm M.S. Flat with
nut & bolts grouted in wall complete.
13.2 Supplying of standard first AID box with antiseptic cream, medicine 5 Nos. 353.50
for use on wounds due burn, crepe bandage, guage bandage,
medicated ready to use bandage (Band-aid) adhesive tape for
medicinal user, scissors, antiseptic solution (Savlon or similar) etc.
(All above contents shall be of standard makes)
13.3 Supply & fixing of printed instruction (First Aid) Chart both in 3 Nos. 151.50
English and Gujarati and duly framed with front glasses, for
treatment of person suffering from electric shock.
13.4 Supplying & fixing of floor mounting stand for keeping four nos. of 3 Nos. 2,121.00
FIRE buckets comprising 1500 mm in length, 900 mm height frame
made out of 30mm X30 mm X 4 mm angle iron with cross supports
for legs, welded with 4 hooks and duly painted with one coat of red
lead and two coats of approved enamelled silver paint.
Item Qty. Unit Rate in Rs. Amount in Rs.
13.5 Supply and fixing of 20 W LED emergency light with maintenance 2 No. 2,670.00
free battery for 4 hours operation during mains power failure.
(1 no. for LT Room)
13.6 Supply and laying of Synthetic Insulating Mat of Class - B of min. 3 Sq.mt 3,636.00
thickness 2.5mm as per IS:15652 and with good electrical insulation r.
property for 11kV/22KV as per site requirement. (for HT Panel)
13.7 Supply and laying of Synthetic Insulating Mat of Class - A of min. 16 Sq.mt 1,212.00
thickness 2mm as per IS:15652 and with good electrical insulation r.
property for 1.1KV/3.3KV as per site requirement. (For LT Panel)
13.8 Providing pair of rubber hand gloves ISI make suitable for working 1 No. 252.50
on 22 KV supply
14.1 LIASONING CHARGES FOR OBTAINING NOC 1 Ls. 25,000.00
Power Liasoning Charges for obtaining N.O.C from Electrical
Inspector / Statutory authority for Power / Ele. Installation. (Fees
shall be paid by tenderer for obtaining N.O.C. from Electrical
Inspector / Statutory authority on behalf of client and shall be
reimbursed on submission of original receipt to Client).
Liasoning Charges shall include preparing required attested
documents & drawing for obtaining NOC on behalf of client
(Applicable Fees / deposits shall be reimbursed by Client).
Item Qty. Unit Rate in Rs. Amount in Rs.
Instrumentation Work
1.0 WATER ANALYZER 1 No. 5,72,634.00
Supply, installation, testing and commissioning of Online FRC
cum pH Analyzer with seperate analog output for FRC and pH
shall be provided at WDS complete with transmitter , sensor, sensor
cable, Sensor mounting assembly / Flow through Assembly suitable
for both sensor, Submersible sampling pump and pipe of required
size and length upto instrument / sensor and sample drain pipe back
upto sump, mounting plate ( min. 3 mm thick MSEP) for complete
instrument, 50 micron Filter and rotameter for control the flow as
recommended by vendor at inlet sampling line to FRC Sensor / flow
throgh assembly ,Weather proof enclosure with glass cutout for
transmitter for indoor/ outdoor installation with glass cutout,
accessories, hardware, consumables, mounting stand, etc. complete in
all respects as per specification to measure and monitor the Chlorine
and pH value of supply water from pumping station to distribution.
1.1 Supply, installation, testing and commissioning of Online Turbidity 1 No. 5,40,969.00
Analyzer at WDS complete with transmitter , sensor, sensor cable,
Sensor mounting assembly / Flow through Assembly, submersible
sampling pump and pipe of required size and length upto
instrument / sensor and sample drain pipe back upto sump, mounting
plate (min. 3 mm thick MSEP ) for complete instrument, Weather
proof enclosure with glass cutout for transmitter for indoor/ outdoor
installation , accessories, hardware, consumables, mounting stand,
etc. complete in all respects as per specification to measure the
Turbidity of supply water from pumping station to distribution.
2.0 PRESSURE MEASURING SYSTEM: 4 Nos. 2,213.00
Supply, installation, testing & commissioning of Bourden type
Pressure Guage glycerene filled having 150 mm dial with necessary
fittings/accessories (Manifold valve, nipples, etc. shall be in SS
only) as per specifications & complete in all respects.Pressure gauge
shall be provided on each Pump delivery side.
Range : 0 - 6 kg / sq.cm.
2.1 Supply, installation, testing and commissioning of Blind type 4 No. 45,644.00
Pressure Transmitter along with two valve manifold , required
fittings, tubing (all valves, fittings, tubings, etc. shall be in SS
only), all accessories, hardware, etc. complete in all respects as per
specifications and having following measurement ranges:
Range : 0 - 6 Kg/cm2 (at each pump discharge line )
2.2 Supply, installation, testing and commissioning of Pressure 1 No. 29,147.00
Transmitter with local display along with two valve manifold
required fittings, tubing (all valves, fittings, tubings, etc. shall be in
SS 316 only), all accessories, hardware, etc. complete in all respects
as per specifications and having following measurement ranges:
Range : 0 - 6 Kg/cm2 (at Pump header )
Item Qty. Unit Rate in Rs. Amount in Rs.
3.0 LEVEL MEASURING SYSTEM FOR SUMP 2 Nos. 59,436.00
Supply, installation, testing and commissioning of Ultrasonic type
Level Transmitter with remote type transmitter with 20 meter cable
between Sensor and Transmitter along with all required accessories,
Weather proof enclosure for transmitter for outdoor application,
mounting stand , etc. complete in all respects as per specification and
having following measurement ranges for liquid (Water) application:
The scope also includes providing 4" flanged puddle pipe
approximate 300 mm long including fixing of the same in existing
civil structure slab of Sump for mounting of sensor .The work also
include all necessary work like make hole,repair / modificationin
existing slab, etc.
Meas. Range: upto 10 m (at both compartment of sump)
3.1 Supply, installation, testing and commissioning of Float type Level 2 Nos. 12,802.00
Switch along with 10 mtr. Cable and WP Junction Box (at sump for
dry run protection of pumps through relay multiplication in PLC),
etc., complete in all respects and as per specification.The scope also
includes providing 4" flanged , puddle pipe approximate 300 mm
long including fixing of the same in existing civil structure slabe of
pump house for mounting of level switch.The work also include all
necessary work like make hole,repair / modificationin existing slab,
Meas. Range: upto 10 m (at 2 nos. suction pit of sump )
3.2 Supply, installation, testing & commissioning of Float & Board 2 Nos. 17,718.00
type level indicator along with all accessories, hardware, etc.
complete in all respects as per specifications and having following
measurement ranges:
Meas. Range: upto 7 m (at both compartment of sump)
4.0 ELECTRO MAGNETIC FLOWMETER MAINS OPERATED 1 No. 3,26,026.00
Supply, installation, testing and commissioning of Full Bore
Electromagnetic flow meter comprising of IP-68 Sensor, IP-66
remote type transmitter with 20 m cable between sensor and
transmitter along with all mounting accessories, Weather proof
enclosure for transmitter, hardware, mounting stand, etc. as per
specification and to complete the work in all respect as per site
condition necessary connection with pipe and shall have following
Meter Size : 700 mm NB (At Pump Common header)
Pipe Size : 700 mm NB
4.1 Meter Size : 450 mm NB (At Sump inlet line) 1 No. 2,26,181.00
Pipe Size : 450 mm NB
Item Qty. Unit Rate in Rs. Amount in Rs.
5.0 PLC BASED CONTROL PANEL FOR WDS 1 No. 14,49,556.00
Supply, Installation, Testing & Commissioning of PLC Based
Instrument control Panel with 32" PC Local SCADA with 15 Screen
display / equavalent tag runtime liecence, 1 no. Laptop, PLC
Programming Software licence, 100 Mbps speed Broadband
connection with Static IP ,VPN Router with suitable no. of port, A4
Laser Printer, 4G GPRS modem with (ethernet port + SIM slot),
Bulk message software 100 SMS per day limit thru gateway to client
/ end user, Etherenet switch, SIM card for remote data tranmission to
Client SCADA in future , Communication port for MFM , 1 no. Spilt
type Air Conditioner (2 Ton 5 start rating ), Instrument Control
Panel '(PLC Enclosure / Panel ) with necessary PLC based logic and
wiring , Min. 2 kVA online UPS (with 60 min backup), etc.
complete in all respects and as per specs with PLC having minimum
I/O count of 60DI /28DO / 18AI /2AO. These are the minimum IO
requirement if any other IO,s required to complete the work
contractor shall be provide the same without any extra cost.
Note : Local SCADA shall be suitable to received the data from
ESR and Distribution network PLC and Monitor and Control
the ESR and Distrubution network from Local SCADA and
transmit the Data of WDS, ESR and Dist. network to Client
SCADA in future .
6.0 INSTRUMENT CABLE & ACCESSORIES 600 MTR 146.00
'Supply, Laying, Installation, Connection, Termination, Testing & .
Commissioning of Instrument Cables as per specs.
The unit rate shall include
a) Supply, loading & unloading of the cable at site from store.
b) Shifitng of cable from site store to place of installation.
c) Fixing of cable clamps, brackets, supports, route markers etc.
where ever required to fix the cables safely.
d) Excavation, back filling and levelling of ground alongwith laying
of fine sand, protection bricks and other necessary civil material for
laying cables outside the building.
f) Testing and submission of sketches & reports of all the cables laid.
6.1 SIGNAL CABLE 800 MTR 133.00
6.2 CONTROL CABLE 500 MTR 330.00
7.0 INSTRUMENT CABLE TRAY 25 MTR 730.00
Supply and installation / erection of Perforated type cable tray of .
galvanized mild steel sheets of 2 mm thickness with required,
hardware, fitting and support structral asccessories . All material
shall be Hot dip galvanised as per IS 2629 and tray hardware shall
be in GI. Support structutre shall be of structral steel for mounting
the cable tray on wall / cable trench or as per site condition,
450 X 25 mm - Perforated type
7.1 100 X 25 mm - Perforated type MTR
7.2 50 X 25 mm - Perforated type MTR
Item Qty. Unit Rate in Rs. Amount in Rs.
8.0 CABLE END TERMINATION AND CONNECTION : 22 Nos. 160.00
'Supply, fixing, connection, testing and commissioning of double
compression brass cable glands and crimping type Bimetalic lugs /
sockets with necessary tools and equipments as specified in
specifications and IS complete in all respects. The glands and lugs /
sockets shall be suitable for cable size and type mentioned above.
The job also includes earthing the glands and armour of the cable
with common earth bar or flexible copper mesh as applicable.
8.1 SIGNAL CABLE 30 Nos. 160.00
8.2 CONTROL CABLE 26 Nos. 230.00
Distribution Network Instrumentation Work
1.0 LEVEL MEASURING SYSTEM FOR ESR ( ESR 1 & 2) 2 Nos. 71,113.00
SITC of Hydrostatic type Level Transmitter with Local Indicator
and 4-20 mA Retransmission output with 40 meter cable along with
all required accessories, Weather proof enclosure for Local indicator
for indoor / outdoor application, mounting stand, structure steel, etc.
complete in all respects with local and remote display at
HMI/SCADA, as per specification and having following
measurement ranges for liquid (water) application:
Meas. Range: upto 10 m (at new ESR)
The scope shall also includes 65mm Dia. uPVC Pipe puddle pipe
with flange including fixing in ESR slab, uPVC guide pipe min sch.
40 or higher of required size & length & fixing of the same in
existing civil structure slab / puddle flange of ESR for mounting of
Instrument . The work also include all necessary work like making
required opening, fixing of pipe & grounting / making it set right, etc.
2.0 LARGE SIZE LED DISPLAY (For ESR) 2 Nos. 20,160.00
Supply, installation, testing and commissioning LED diplay 8" size
(320 mm H X 650 mm W X 50 mm D) with 4-20 mA Input at ESR
to monitor the level of ESR from distance , all required accessories,
etc. complete in all respects as per specification.
Note: ESR Large Display shall be mount at ESR.
3.0 Supply, installation, testing and commissioning of Pressure 4 Nos. 29,147.00
Transmitter with local display along with two valve manifold
required fittings, tubing (all valves, fittings, tubings, etc. shall be in
SS 316 only), all accessories, hardware, etc. complete in all respects
as per specifications and having following measurement ranges:
Range : 0 - 2 Kg/cm2 (DMA1 Dist. netwok pipe label no. P1/033,
PI/059, DM2 Dist. network PL. P2/006, P2/055)
Item Qty. Unit Rate in Rs. Amount in Rs.
4.0 ELECTRO MAGNETIC FLOWMETER MAINS OPERATED 2 Nos. 2,63,124.00
Supply, installation, testing and commissioning of Full Bore
Electromagnetic flow meter comprising of IP-68 Sensor , IP-66
remote type transmitter with 20 m cable between sensor and
transmitter along with all mounting accessories, Weather proof
enclosure for transmitter, hardware, mounting stand, etc. as per
specification and to complete the work in all respect as per site
condition necessary connection with pipe and shall have following
ESR Inlet line Flow meter shall be installed in vertical pipe line with
proper support while D/N flow meter shall be installed in horizontal
Meter Size :500 mm (At inlet pipe of ESR1 & 2 )
Pipe Size : 500mm NB
4.1 Meter Size :150 mm (at DMA1 Dist n/w PL no. P1/033 & DM2 2 Nos. 82,972.00
Dist. n/w PL no. P2/006 )
Pipe Size : 300mm, 250 mm NB
4.2 Meter Size :100 mm (at DMA2 Dist n/w PL no. P2/055) 1 No. 65,837.00
Pipe Size : 200 mm NB
4.3 Meter Size :80 mm (at DMA1 Dist n/w PL no. P1/059) 1 No. 61,837.00
Pipe Size : 200 mm NB
5.0 PLC /RTU CONTROL PANEL FOR ESR 2 & DIST. N/W 5 Nos. 3,66,146.00
Supply, Installation, Testing & Commissioning of PLC Based
Instrument control Panel with 4G GPRS modem with (ethernet port
+ SIM slot ) for remote data tranmission to WDS SCADA,
Instrument Control Panel '(PLC Enclosure / Panel ) with necessary
wiring , Required no. of DP MCB for 3 phase Power Supply to
Motorized valve, 1 kVA UPS (with 60 min backup alongwith filter
for harmonic, suitable rating SMF batteries ), etc. complete in all
respects and as per specs PLC having minimum I/O count of 10DI /
6 DO / 4AI /2AO. For Field mounted 4 nos. FT and 4 nos. Pressure
Tx. in distribution network)
The scope shall also include providing MS section Pillar with
lockable door to enclose the PLC Panel suitable for installation in
6.0 INSTRUMENT CABLE & ACCESSORIES 150 MTR 146.00
'Supply, Laying, Installation, Connection, Termination, Testing & .
Commissioning of Instrument Cables as per specs.
The unit rate shall include
a) Supply, loading & unloading of the cable at site from store.
b) Shifitng of cable from site store to place of installation.
c) Fixing of cable clamps, brackets, supports, route markers etc.
where ever required to fix the cables safely.
d) Excavation, back filling and levelling of ground alongwith laying
of fine sand, protection bricks and other necessary civil material for
laying cables outside the building.
f) Testing and submission of sketches & reports of all the cables laid.
Item Qty. Unit Rate in Rs. Amount in Rs.
6.1 SIGNAL CABLE 200 MTR 133.00
6.2 CONTROL CABLE 50 MTR 330.00
7.0 INSTRUMENT CABLE TRAY 50 MTR 291.00
Supply and installation / erection of Perforated type cable tray of .
galvanized mild steel sheets of 2 mm thickness with required,
hardware, fitting and support structral asccessories . All material
shall be Hot dip galvanised as per IS 2629 and tray hardware shall
be in GI. Support structutre shall be of structral steel for mounting
the cable tray on wall / cable trench or as per site condition,
50 X 25 mm - Perforated type
8.0 CABLE END TERMINATION AND CONNECTION : 12 Nos. 160.00
'Supply, fixing, connection, testing and commissioning of double
compression brass cable glands and crimping type Bimetalic lugs /
sockets with necessary tools and equipments as specified in
specifications and IS complete in all respects. The glands and lugs /
sockets shall be suitable for cable size and type mentioned above.
The job also includes earthing the glands and armour of the cable
with common earth bar or flexible copper mesh as applicable.
8.1 SIGNAL CABLE 20 Nos. 160.00
8.2 CONTROL CABLE 2 Nos. 230.00
9.0 FLEXIBLE CONDUIT 60 MTR 70.00
1" Pre flexible conduit for field mounted Flow and Pressure Tx. .
10.0 CHEMICAL EARTHING SYSTEM 10 Set 10,487.29
SITC of chemical earthing with earthpit of minimum bore size dia.
225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology
as per IS-3043:1987 made of corrosion free G.I. Pipes having Outer
pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia
of 40 mm having 200-250 Micron galvanising or copper coated solid
steel road / flat strip type connection terminal 14mm dia with
constant ohmic value surrounded by highly conductive corrosion
resistant chemical compound with high charge dissipation suitable
for electrical installation covering Sensitive computer system (like
Automation, SCADA) & of 3Mtr. length of Pipe with two nos.
25Kg. bag of Back filling compound. (2nos. for each PLC Panel )
NOTE: Earthing Resistance value & date shall be painted on the
Item Qty. Unit Rate in Rs. Amount in Rs.
11.0 Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes Copper 38 Kg. 601.69
Strip including supply & fixing of bolts, saddles when laid inside the
building and inclusive of excavation & refilling of earth when laid
outside the building & interconnection with earth pit & PLC Panel
(25X3 Cu. Strip, 0.761 Kg/m, 0.761 x 500mtr.=38Kg.)
Copper Bolt,Nuts ,Washers shall be used for Connecting Earth
electrode to individual eqp. Bitumen shall be used at the place of
joint/welding. (For PLC Panel to Earthing)
12.0 Supply, Installation, Testing and Commissioning of CI/ DI D/F 2 NOS. 2,12,897.00
Butterfly Valve, extended spindle of required length with head
stock, as per IS 13095, PN 1.0 with Electrically Actuator (With 4-
20 mA O/p) Gear operated with of following sizes with SS
seat rings, SS rising spindle with all hot dipped galvanised
hardwares, bolts, nuts & washers, gaskets including all taxes,
insurance, transportation, freight charges, Inspection Charges,
loading unloading, conveyence to pump house, stacking, security etc.
complete as per IS and Specification.
Size: 500 mm NB (at inlet Pipe of ESR-1&2)
13.0 MS PIPES & SPECIALS: 3 RMT 1,465.00
Supply, Gas cutting of pipe, Fabrication of reducer & expander,
welding, Installation, testing and commissioning of MS pipe of min.
thk. given below, Specials, reducer, expander etc. conforming to IS
3589 & flanges confirming to IS 6392-PN-1.0, fabricated from MS.
plate with necessary supports & anchoring. Pipe fabricated from MS
plate. (Excluding supply of flange)
Size: 150 mm NB X 4.5 mm Thk
13.1 Size : 200 mm NB X 6.3 mm Thk 5 RMT 2,553.00
13.2 Size : 250 mm NB X 6.3 mm Thk 3 RMT 3,195.00
13.3 Size : 300 mm NB X 7.1 mm Thk 3 RMT 4,456.00
14.0 G.I. PIPES & FITTINGS: 1 RMT 716.00
Supply, installation, connection with equipments as required, testing
and commissioning of GI pipe conforming to IS-1239 , Heavy Duty
with coupling, tee, bend, union, elbow, flanges , etc as all required
fittings for connection complete with gaskets, hardware, and required
accessories as per IS & Specifications.
Size: 80 mm NB (for Flow meter)
14.1 Size : 100 mm NB (for Flow meter) 2 RMT 1,026.00
15.0 Supply, installation, testing and commissioning of double flanged 1 Nos. 4,656.00
Expansion Bellows confirming to EJMA/IS standard with PN
rating & all necessary St.St. hardware's.
Size : 150 mm x 300 mm (L) ( For Flow Meter)
15.1 Size : 500 mm x 300 mm (L) ( For MOV & Flow Meter) 4 Nos. 22,200.00
16.0 Supply, welding , Installation, testing & commissioning of MS flat 4 Nos. 690.00
machined faced flanges confirming to IS 6392 & drilled as per IS-
1538 with drilling off centre bolt holes and flange thickness as per
PN 1.0 including cutting & welding.
Size : 80 mm NB - Drilled
Item Qty. Unit Rate in Rs. Amount in Rs.
16.1 Size : 100 mm NB - Drilled 4 Nos. 800.00
16.2 Size : 150 mm NB - Drilled 8 Nos. 1,180.00
16.3 Size : 500 mm NB - Drilled 8 Nos. 4,650.00
17.0 MECHANICAL COUPLING 4 Nos. 4,311.00
Supply, installation, testing and commissioning of following flanged
ends Mechanical Joint Coupling of manufactured of DI material and
suitable for joining CI / DI /MS pipes of plain ends confirming to
applicable IS/manufacturer standard having PN 1.0 rating & with
sealing rings, sleeve of suitable lengths, tie rods, nuts with washers
and all necessary St. hardware's for providing leak tight loint.
Size : 200 mm NB (for Pipe Label no. P1/059, P2/055)
17.1 Size : 250 mm NB (for Pipe Label no. P2/006) 2 Nos. 5,199.00
17.2 Size : 300 mm NB (for Pipe Label no. P1/033) 2 Nos. 5,655.00
18.0 Flanged Joints of Pipes, Fittings and Specials: 4 Nos. 434.00
Supply, Installation, Making of Flanged CI /MS/ GI Pipes, Fittings
and Specials Joints with all jointing materials, rubber packing, nut
bolts, labour etc.for complete connection.
Size: 80 mm dia. (for Flow meter)
18.1 Size: 100 mm dia. (for Flow meter) 4 Nos. 477.00
18.2 Size: 150 mm dia. (for Flow meter) 8 Nos. 611.00
18.3 Size: 500 mm dia. (for Flow meter & MOV) 8 Nos. 2,588.00
19.0 LIASONING CHARGES FOR STATUTORY 5 Nos. 10,000.00
APPROVAL/OBTAINING POWER NOC
Liasoning Charges for obtaining power as required / N.O.C for
Electrical Installation from Electrical Inspector / Statutory authority
for LT Power ( at ESR & Dist. network)
Tools & Test Equipment
1.0 OFFICE FURNITURE 1 No 6,000.00
Office Table of size 1200 mm length X 600 mm width
1.1 Steel Office chair 3 Nos 3,000.00
1.2 Steel cupboard (6 feet H x 3.5 feet W x 1.0 feet 4 inch D) 1 No 18,000.00
2.1 Magger of range 0 -1000V 1 No 6,000.00
2.2 Clipon meter (Battery operated) satisfying the following. 1 No 8,000.00
(i)With 0.100 mA, 0-1 A and 0-200 A AC
(iii) Least five (0-100) m.Ohm,(0-1) Ohm, (0-10) Ohm, (0-100)
Ohm, (0-1000) Ohm.
(iv) The input impedence shall not be less than one maga ohms for
2.3 Single Phase Elect. Portable Air blower 1500 RPM 1 No 6,000.00
3.0 LADDER 1 No 15,000.00
Ladder shall be made out of light aluminium allow of good strength.
They shall be of step ladder, foldable, self supportig type with
sperader of metalic angles or high strength.
Item Qty. Unit Rate in Rs. Amount in Rs.
Note: Above items shall be handed over to GMC before the commencement of O&M period for proposed WDS.
PROVIDING AND LAYING RISING MAIN FROM WDS TO ESR IN TP- 28 AND 29 PART-I
SCHEME OF GMC AREA
01 Excavation for pipe line trenches distribution network, valve
chambers for all required gradient and line including safety
provisions using site rails and stacking excavated stuff
including up to all required lead cleaning the site etc. complete
for all lifts and strata as specified.
In all sort of soils and soft murrum
02 Providing and supplying DI K-9 grade pipe with EPDM gasket
for following nominal bore diameter with internal cement
mortar lining including all taxes, insurance, transportation,
freight charges, octroi, inspection charges, loading, unloading,
conveyance to site, stacking etc. complete. (IS 8329-2000).
800 mm dia. DI pipe (K-9) 785.00 Rmt 16,455.00
1000 mm dia. DI pipe (K-9) 20.00 Rmt 23,976.00
03 Lowering, laying and jointing DI Pipes of various classes with
specials of following diameters in proper position grade and
alignment as directed by Engineer in charge.
800 mm dia. DI pipe (K-9) 785.00 Rmt 635.00
1000 mm dia. DI pipe (K-9) 20.00 Rmt 914.00
04 D.I. Specials - Manufacture, Supply,Delivery of Ductile Iron
flanged Socket Spigot Bends, tees,reducers or any other
specials as per BS-EN-545/1995 Class-A series K12 suitable
for use with D.I Pipes manufactured as per IS:8329/1994
delivery of specials to site of works any where in Gujarat
including fixing, all taxes, loading, unloading, carting,
stacking,insurance, inspection charges, octroi etc. complete.
Above 300 mm dia 5324.00 Kg 151.00
05 Providing and laying cement concrete M20 for thrust block 115.00 m3 4,422.47
and encasing including formwork but excluding the cost of
reinforcement with curing etc. complete, as directed.
06 Providing TMT Bar Fe-500/500D reinforcement bars for R. C. 3.00 MT 77,285.20
C. work including bending, binding and placing in position
complete upto floor two level.
07 Providing and laying cement concrete 1:2:4 (1 cement : 2 3.00 m3 3,758.19
coarse Sand :4 Graded stone aggregate 20 mm nominal size)
and curing etc. complete excluding cost of form work.
Item Qty. Unit Rate in Rs. Amount in Rs.
08 Providing,supplying ,fixing ISI mark Ductile Iron D/F
manually gear operated SLUICE VALVE including taxes,
insurance, transportation, fright charges, Octroi Inspection,
charges, loading , unloading, conveyance to site stacking, etc.
complete valve with ISI mark only
PN 1.0 with hand wheel /cap operated (PD Type Short body)
09 Providing and supplying CI/DI Tamper proof /Bi Stream Air
valves with SS 304 Float gun metal nozzle of approved make
& quality of following class and diameter including all taxes,
transportation, freight charges, octroi, inspection charges,
loading, unloading, conveyance to the departmental stores,
stacking etc. complete.
With isolating sluice valve PN
10 Lowering, laying & jointing in position following air Valves 2.00 No. 857.00
including cost of all labour, jointing material, including nut
bolts & giving satisfactory hydraulic testing, etc. complete.
With Isolating Sluice Valve PN
11 Refilling the pipeline trenches including ramming, watering, 2567.00 m3 22.00
consolidating disposal of surplus stuff as directed within a
radium of 3 Km.
12 Extra rate over item of excavation of earth for excavation of
asphalt pavement/RCC of thickness upto 0.30 meter including
demolishing the asphalt carpet, metal, soiling/cutting
Reinforcement etc. comp. with stacking the material as
up to 0.30 meter (By any type of Breaker Machine or R.C.C 135.00 Smt 200.00
Cutter machine including cost of operator, fuel &
transportation etc complete.
13 Reinstatement of Bituminous road including with 40 mm thick 135.00 Smt 1,945.00
Bituminous Concrete using 5.4 % Asphalt ,50 mm thick DBM
using 4.5 % Asphalt with tack coat using RS 1 emulsion @
2.5 Kg/Sqm , with Tack coat using RS 1 emulsion @
Kg/Sqm, Prime coat with SS 1 emulsion @ 7.5 kg/Sqm,250
mm thick WMM , 200 mm thick GSB V loosening and
recompacting ground as per respective MoRTH specification
and as directed by engineer in charge.
Item Qty. Unit Rate in Rs. Amount in Rs.
14 Providing F.R.C. MH seat cover incl. carting to the work site 4.00 No. 2,380.00
etc. comp. Directed. F.R.C. Extra Heavy Duty (EHD-35)
machinehole Covers & Frames Cover: 728mmø & 100 mm
thick circular cover, 35.00MT load design,100 x 2mm MS flat
all round,16mm øplain round bar for lifting the cover & should
be fitted with plastic cups. Frame:560mm ø clear opening, -
888 x 888 x 175mm. On the upper periphery off rame 25x3
mm wide MS flat should be well embed in concrete to protect
the edges off rame. FRCE.H.D.-35 machinehole cover &
frame described as above.
15 Demolition and disposal of unserviceable materials with all
Unreinforcement Cement Concrete 100.00 m3 639.72
16 Demolition including stacking of serviceable materials and
disposal of unserviceable materials with all lead and lift
17 Demolition of Brick work and stone masonry including
stacking of serviceable materials and disposal of unserviceable
materials with all lead and lift
In Cement Mortar 100.00 m3 577.92
18 Construction of chambers in RCC M30 with Ordinary
Portland cement with TMT Fe-500 reinforcement, PCC150
mm thick in M 15 ,15 mm thick inside cement plaster in
C.M.1:3 and depth of chamber from G.L. to pipe invert level
including complete civil works and inclusive of the cost of of
excavation, refilling and PVC foot steps including providing
RCC Slab in one single piece with fixing of FRC (heavy duty)
manhole frame and cover or RCC 25 Precast slab in parts with
key hole etc. complete.
RC.C. Top Slab 9.00 m3 8,213.00
RC.C. Base Slab 9.00 m 3 8,213.00
TMT Fe-500 Reinforcement 5.00 MT 77,285.20
15 mm thick Inside Cement Plaster in CM 1 : 3 96.00 m2 185.41
FRC Manhole 4.00 No. 2,380.00
Refilling 71.00 m3 22.00
PVC steps 36.00 No. 87.00
Item Qty. Unit Rate in Rs. Amount in Rs.
1 RCC ESR 15 Lacs. Litre capacity 24 mt. Staging Height
Overhead Tank (ESR-1) in Exist. WDS Plot of TP-7
Designing, structurally (and aesthetically) complying Provisions of
relevant lndian standards and constructing 15 Lac litre capacity 24 mt.
staging height RCC Elevated Service Reservoir (RCC M-30 grade
concrete and reinforcement TMT Fe-500) of the below mentioned size
using latest S.B.C. of proposed site, Seismic zone-03, Wind speed Zone.
Including (1) Container shape any suitable type(or as specified). (2)
Staging consisting of column brace trestle / combination column- brace
trestle and shaft as appropriate(or as specified) and (3). This includes
excavation in all types of soil strata(induding hard rock ). casting100
mm thick P C.C. levelling course in M-10 . Refilling the pit with
proper soil and disposing of the surplus stuff at all required lead. (4)
This will also include cement plaster in CM 1:3 with approved water
proofing compound all over inside container (ie. walls, base, top
slab/dome bottom etc. all). (5) Providing and fixing of any
accessories(specified) like MS / GI ladder, Cl Manhole frame and
covers, water level indicator , lightening conductor, Gl Pipe railing
around walk way, at roof level, at gallery and around landing of inside
shaft, Adequate cowl type ventilators or lantern type ventilator with
stainless steel jali. (6) Scope of work includes constructing RCC spiral
staircase with adequate tie beams, staircase footing , ventilating shaft
and ventilators as well as door in shaft, SS grating to be provided to
outlet pipe (Inside container) for safety. (7) including providing and
applying three coats of cement paint/snowcem (as specified) to the whole
structure. (8) It also includes satisfactory water tightness test as per
relevant I.S Code and painting name of scheme & capacity on the tank
as per direction of engineer in charge. (9) It also includes satisfactory
water tightness test as per relavant IS code and painting name of scheme
& capacity on the tank as per direction of Enginner in charge.
List of Indian Standard for design of ESR :
Note : The structural design of ESR shall be in accordance
with provisions of relevant Indian Standards
I.S. 3370 part I & II 2009 or its latest revision (1:1) I.S.
Part III & IV 1965 or its latest revision
IS 456-2000 or its latest revision
IS 11682-1985 or its latest revision
IS 1893-2002 Part I to V or its latest revision
Is 13920-1993 or its latest revision
IS 875 Part I to III, 1987 or its latest revision
IS 11089-1987 or its latest revision
2 General Specifications :
The Min. concrete grade for RCC shall be M:30. Proportion
of concrete ingredients shall be as per Mix design using weigh
Item Qty. Unit Rate in Rs. Amount in Rs.
TMT Fe-500 or higher grade reinforcing bars confirming to
IS:1786/1139 or TMT bars shall be used as per detailed
In case of column -brace trestle type staging having more than
6 columns internal horizontal bracing is obligatory.
Min. size/ thickness of various components shall be provided
as per design criteria/specifications/IS Code (or as per std.
practice). Capacity of the ESR shall be considered excluding
Minimum dimensions specified for various components in
tender data /specifications should be provided.
The foundation shall be referred from latest SBC test report
or tender datasheet. During execution If poor soil strata or
ground water table is encountered, the SBC shall have to be re
ascertained and the design should be revised accordingly
Maximum spacing between horizontal bracings shall be 5 m
(storey height)
The BB Masonry cabin with MS door shall be constructed
when spiral staircase is outside the staging.
RCC Staircase/ MS Staircase shall be provided and fixed for
access to roof when height of roof from G.L. is up to 10 m. For
ESR having more than 10 m height proper RCC staircase or
suitable RCC spiral staircase shall be constructed. Railing
should be provided through out the staircase and around the
For ESR-having staging height more than 15m the spiral
staircase shall be provided inside the staging with effective
tie beams in more than one direction
Water level indictor shall be provided and fixed float type
/electronic (as specified).
The rate shall include cost of dewatering during execution
making all arrangement with any dewatering technique.
The structure shall be designed properly for uplift due to
Ground water table specified in data or GWT encountered
during execution. No extra payment shall be paid for the same.
Effective curing shall be carried out up to required period as
per specifications.
Item Qty. Unit Rate in Rs. Amount in Rs.
Agency shall engage quailfied (at least graduate)consulting
engnieer for designing the structure and he/she shall visit the
site for guidance of work at all levels (i.e.below foundation,
up to GL. above GL for all lifts up to container).
75% part rate shall be payable for Concrete, Reinforcement
and Plastering items of container until satisfactory hydraulic
testing for watertightness is performed. Or as per tender
condition. Till then the work shall be treated as incomplete.
Above conditions/ general specifications Sr. No. 1 to 16 are
part & parcel of tender (contract)
Capacity of ESRs (shell type container like cylindrical,
conical, intze, folded plates & its combination)
Cost of 15 lacs liter capacity (For Seismic zone-3) 1.00 No. 1,35,14,809.00
2 Providing and fixing flanged D.I.D.F. / Class K-9 pipes
vertically for RCC Reservoir incl. providing clamps at every
mt incl. jointing materials such as nuts, bolts, rubber packing,
hydraulic testing and necessary scaffolding etc. complete.
700 mm dia. Inlet pipes and overflow pipes 70.00 Rmt. 25,369.00
700 mm dia. Outlet pipes 40.00 Rmt. 25,369.00
300 mm dia. Washout pipes 40.00 Rmt. 7,219.00
3 Providing, supply and Delivery of Ductile Iron flanged 'ended
fittings / specials conforming to relevant IS, to 'store or site of
work including freight, loading, 'unloading, stacking all taxes,
insurance and including 'jointing with jointing materials like
'gaskets, nuts and bolts etc. as required for inlet,'outlets,
overflows, washout etc.
Duct foot bends
For 300 mm dia. 156.00 Kg. 155.00
Crippling flanges
For 300 mm dia. 110.00 Kg. 155.00
For 700 mm dia. 304.00 Kg. 158.00
For 300 mm dia. 45.00 Kg. 155.00
4 Providing and supplying of approved make of D.I. / S.G. Iron
double flanged butterfly valve of following class and diameter
confirming to IS 13095-1991 with electric actuator operating
system including all taxes, insurance, transportation, freight
charges, octroi, inspection charges, loading, unloading,
conveyance to site, stacking etc. complete. PN-1.0 with gear
operated (PD type short body)
For 500 mm dia. Inlet & Outlet (BF valve) 2.00 No. 44,652.00
For 300 mm dia. for washout (Sluice valve) 1.00 No. 20,384.00
Item Qty. Unit Rate in Rs. Amount in Rs.
5 Lowering, laying and jointing in position C.I. / D/F Butterfly
valves, Sluice valves of following dia. including cost of all
labour, jointing material, including nut, bolts and giving
satisfactory hydraulic testing etc, complete.
For 500 mm dia. Inlet & Outlet (BF valve) 2.00 No. 2,905.00
For 300 mm dia. for washout (Sluice valve) 1.00 No. 1,141.00
6 Providing and supplying CI/DI Temper proof Air valves with
SS 304 Float gun metal nozzle of approved make & quality of
following class and diameter including all taxes,
transportation, freight charges, octroi, inspection charges,
loading, unloading, conveyance to site, stacking etc.
complete.With Isolating Sluice Valve PN
With Isolating Sluice Valve PN
7 Lowering, laying & jointing in position following air Valves
including cost of all labour, jointing material, including nut
bolts & giving satisfactory hydraulic testing, etc. complete.
8 Construction of chambers in RCC M30 with TMT Fe-500
reinforcement, PCC150 mm thick in M 15 ,20 mm thick inside
cement plaster in C.M.1:3 with OPC cementand depth of
chamber from G.L. to pipe invert level including complete
civil works and inclusive of the cost of of excavation, refilling
and PVC foot steps including providing RCC Slab in one
single piece with fixing of FRC (heavy duty) manhole frame
and cover or RCC 1:2:4 Precast slab in parts with key hole etc.
RC.C. Top Slab 3.00 m3 8,213.00
RC.C. Base Slab 3.00 m 3 8,213.00
4) TMT Fe-500 Reinforcement 2.00 MT 77,285.20
5) 20 mm thick Inside Cement Plaster in CM 1 : 3 43.00 m2 180.40
6) FRC machinehole 3.00 No. 2,380.00
7) Refilling 32.00 m3 22.00
8) PVC steps 21.00 No. 87.00
Item Qty. Unit Rate in Rs. Amount in Rs.
9 RCC ESR 10 Lacs. Litre capacity 24 mt. Staging Height
Overhead Tank (ESR-2)
Designing, structurally (and aesthetically) complying Provisions of
relevant lndian standards and constructing 10 Lac litre capacity 24 mt.
staging height RCC Elevated Service Reservoir (RCC M-30 grade
concrete and reinforcement TMT Fe-500) of the below mentioned size
using latest S.B.C. of proposed site, Seismic zone-03, Wind speed Zone.
Including (1) Container shape any suitable type(or as specified). (2)
Staging consisting of column brace trestle / combination column- brace
trestle and shaft as appropriate(or as specified) and (3). This includes
excavation in all types of soil strata(induding hard rock ). casting100
mm thick P C.C. levelling course in M-10 . Refilling the pit with
proper soil and disposing of the surplus stuff at all required lead. (4)
This will also include cement plaster in CM 1:3 with approved water
proofing compound all over inside container (ie. walls, base, top
slab/dome bottom etc. all). (5) Providing and fixing of any
accessories(specified) like MS / GI ladder, Cl Manhole frame and
covers, water level indicator , lightening conductor, Gl Pipe railing
around walk way, at roof level, at gallery and around landing of inside
shaft, Adequate cowl type ventilators or lantern type ventilator with
stainless steel jali. (6) Scope of work includes constructing RCC spiral
staircase with adequate tie beams, staircase footing , ventilating shaft
and ventilators as well as door in shaft, SS grating to be provided to
outlet pipe (Inside container) for safety. (7) including providing and
applying three coats of cement paint/snowcem (as specified) to the whole
structure. (8) It also includes satisfactory water tightness test as per
relevant I.S Code and painting name of scheme & capacity on the tank
as per direction of engineer in charge. (9) It also includes satisfactory
water tightness test as per relavant IS code and painting name of scheme
& capacity on the tank as per direction of Enginner in charge.
List of Indian Standard for design of ESR :
Note : The structural design of ESR shall be in accordance
with provisions of relevant Indian Standards
I.S. 3370 part I & II 2009 or its latest revision (1:1) I.S.
Part III & IV 1965 or its latest revision
IS 456-2000 or its latest revision
IS 11682-1985 or its latest revision
IS 1893-2002 Part I to V or its latest revision
Is 13920-1993 or its latest revision
IS 875 Part I to III, 1987 or its latest revision
IS 11089-1987 or its latest revision
General Specifications :
The Min. concrete grade for RCC shall be M:30. Proportion
of concrete ingredients shall be as per Mix design using weigh
TMT Fe-500 or higher grade reinforcing bars confirming to
IS:1786/1139 or TMT bars shall be used as per detailed
Item Qty. Unit Rate in Rs. Amount in Rs.
In case of column -brace trestle type staging having more than
6 columns internal horizontal bracing is obligatory.
Min. size/ thickness of various components shall be provided
as per design criteria/specifications/IS Code (or as per std.
practice). Capacity of the ESR shall be considered excluding
Minimum dimensions specified for various components in
tender data /specifications should be provided.
The foundation shall be referred from latest SBC test report
or tender datasheet. During execution If poor soil strata or
ground water table is encountered, the SBC shall have to be re
ascertained and the design should be revised accordingly
Maximum spacing between horizontal bracings shall be 5 m
(storey height)
The BB Masonry cabin with MS door shall be constructed
when spiral staircase is outside the staging.
RCC Staircase/ MS Staircase shall be provided and fixed for
access to roof when height of roof from G.L. is up to 10 m. For
ESR having more than 10 m height proper RCC staircase or
suitable RCC spiral staircase shall be constructed. Railing
should be provided through out the staircase and around the
For ESR-having staging height more than 15m the spiral
staircase shall be provided inside the staging with effective
tie beams in more than one direction
Water level indictor shall be provided and fixed float type
/electronic (as specified).
The rate shall include cost of dewatering during execution
making all arrangement with any dewatering technique.
The structure shall be designed properly for uplift due to
Ground water table specified in data or GWT encountered
during execution. No extra payment shall be paid for the same.
Effective curing shall be carried out up to required period as
per specifications.
Agency shall engage quailfied (at least graduate)consulting
engnieer for designing the structure and he/she shall visit the
site for guidance of work at all levels (i.e.below foundation,
up to GL. above GL for all lifts up to container).
Item Qty. Unit Rate in Rs. Amount in Rs.
75% part rate shall be payable for Concrete, Reinforcement
and Plastering items of container until satisfactory hydraulic
testing for watertightness is performed. Or as per tender
condition. Till then the work shall be treated as incomplete.
Above conditions/ general specifications Sr. No. 1 to 16 are
part & parcel of tender (contract)
Capacity of ESRs (shell type container like cylindrical,
conical, intze, folded plates & its combination)
Cost of 10 lacs liter capacity (For Seismic zone-3) 1.00 No. 1,00,88,433.00
10 Providing and fixing flanged D.I.D.F. / Class K-9 pipes
vertically for RCC Reservoir incl. providing clamps at every
mt incl. jointing materials such as nuts, bolts, rubber packing,
hydraulic testing and necessary scaffolding etc. complete.
700 mm dia. Inlet pipes and overflow pipes 70.00 Rmt. 25,369.00
700 mm dia. Outlet pipes 40.00 Rmt. 25,369.00
300 mm dia. Washout pipes 40.00 Rmt. 7,219.00
11 Providing, supply and Delivery of Ductile Iron flanged 'ended
fittings / specials conforming to relevant IS, to 'store or site of
work including freight, loading, 'unloading, stacking all taxes,
insurance and including 'jointing with jointing materials like
'gaskets, nuts and bolts etc. as required for inlet,'outlets,
overflows, washout etc.
Duct foot bends
For 300 mm dia. 156.00 Kg. 155.00
Crippling flanges
For 300 mm dia. 110.00 Kg. 155.00
For 700 mm dia. 304.00 Kg. 158.00
For 300 mm dia. 45.00 Kg. 155.00
12 Providing and supplying of approved make of D.I. / S.G. Iron
double flanged butterfly valve of following class and diameter
confirming to IS 13095-1991 with electric actuator operating
system including all taxes, insurance, transportation, freight
charges, octroi, inspection charges, loading, unloading,
conveyance to site, stacking etc. complete. PN-1.0 with gear
operated (PD type short body)
For 500 mm dia. Inlet & Outlet (BF valve) 2.00 No. 44,652.00
For 300 mm dia. for washout (Sluice valve) 1.00 No. 20,384.00
13 Lowering, laying and jointing in position C.I. / D/F Butterfly
valves, Sluice valves of following dia. including cost of all
labour, jointing material, including nut, bolts and giving
satisfactory hydraulic testing etc, complete.
For 500 mm dia. Inlet & Outlet (BF valve) 2.00 No. 2,905.00
For 300 mm dia. for washout (Sluice valve) 1.00 No. 1,141.00
Item Qty. Unit Rate in Rs. Amount in Rs.
14 Providing and supplying CI/DI Temper proof Air valves with
SS 304 Float gun metal nozzle of approved make & quality of
following class and diameter including all taxes,
transportation, freight charges, octroi, inspection charges,
loading, unloading, conveyance to site, stacking etc.
complete.With Isolating Sluice Valve PN
With Isolating Sluice Valve PN
15 Lowering, laying & jointing in position following air Valves
including cost of all labour, jointing material, including nut
bolts & giving satisfactory hydraulic testing, etc. complete.
16 Construction of chambers in RCC M30 with TMT Fe-500
reinforcement, PCC150 mm thick in M 15 ,20 mm thick inside
cement plaster in C.M.1:3 with OPC cementand depth of
chamber from G.L. to pipe invert level including complete
civil works and inclusive of the cost of of excavation, refilling
and PVC foot steps including providing RCC Slab in one
single piece with fixing of FRC (heavy duty) manhole frame
and cover or RCC 1:2:4 Precast slab in parts with key hole etc.
RC.C. Top Slab 3.00 m3 8,213.00
RC.C. Base Slab 3.00 m 3 8,213.00
TMT Fe-500 Reinforcement 2.00 MT 77,285.20
20 mm thick Inside Cement Plaster in CM 1 : 3 43.00 m2 180.40
FRC machinehole 3.00 No. 2,380.00
Refilling 32.00 m3 22.00
PVC steps 21.00 No. 87.00
PROVIDING AND LAYING WATER DISTRIBUTION NETWORK IN TP- 28 AND 29 PART-I
SCHEME OF GMC AREA
01 Excavation for pipe line trenches distribution network, valve
chambers for all required gradient and line including safety
provisions using site rails and stacking excavated stuff
including up to all required lead cleaning the site etc. complete
for all lifts and strata as specified.
In all sort of soils and soft murrum
1.5 to 3 mt. Depth 60.00 m3 98.00
Item Qty. Unit Rate in Rs. Amount in Rs.
02 Providing and supplying DI K-9 grade pipe with EPDM gasket
for following nominal bore diameter with internal cement
mortar lining including all taxes, insurance, transportation,
freight charges, octroi, inspection charges, loading, unloading,
conveyance to site, stacking etc. complete. (IS 8329-2000).
100 mm dia. DI pipe (K-9) 43170.00 Rmt 1,127.00
150 mm dia. DI pipe (K-9) 310.00 Rmt 1,655.00
200 mm dia. DI pipe (K-9) 12340.00 Rmt 2,239.00
250 mm dia. DI pipe (K-9) 18565.00 Rmt 2,998.00
300 mm dia. DI pipe (K-9) 2550.00 Rmt 3,788.00
400 mm dia. DI pipe (K-9) 580.00 Rmt 5,586.00
450 mm dia. DI pipe (K-9) 215.00 Rmt 6,673.00
500 mm dia. DI pipe (K-9) 270.00 Rmt 7,909.00
Item Qty. Unit Rate in Rs. Amount in Rs.
03 Lowering, laying and jointing DI Pipes of various classes with
specials of following diameters in proper position grade and
alignment as directed by Engineer in charge.
100 mm dia. DI pipe (K-9) 43170.00 Rmt 55.00
150 mm dia. DI pipe (K-9) 310.00 Rmt 76.00
200 mm dia. DI pipe (K-9) 12340.00 Rmt 99.00
250 mm dia. DI pipe (K-9) 18565.00 Rmt 127.00
300 mm dia. DI pipe (K-9) 2550.00 Rmt 155.00
400 mm dia. DI pipe (K-9) 580.00 Rmt 225.00
450 mm dia. DI pipe (K-9) 215.00 Rmt 265.00
500 mm dia. DI pipe (K-9) 270.00 Rmt 312.00
04 D.I. Specials - Manufacture, Supply,Delivery of Ductile Iron
flanged Socket Spigot Bends, tees,reducers or any other
specials as per BS-EN-545/1995 Class-A series K12 suitable
for use with D.I Pipes manufactured as per IS:8329/1994
delivery of specials to site of works any where in Gujarat
including fixing, all taxes, loading, unloading, carting,
stacking,insurance, inspection charges, octroi etc. complete.
For 100 to 300 mm dia 57614.00 Kg 148.00
Above 300 mm dia 2706.00 Kg 151.00
05 Providing and laying cement concrete M20 for thrust block 791.00 m3 4,422.47
and encasing including formwork but excluding the cost of
reinforcement with curing etc. complete, as directed.
06 Labour charges for making hole below road surface at 200.00 Rmt. 641.35
required of required size with hand tools including refiling
after completion of laying and testing of pipe line below
mm dia. of pipe.
07 Providing TMT Bar Fe-500/500D reinforcement bars for R. C. 24.00 MT 77,285.20
C. work including bending, binding and placing in position
complete upto floor two level.
08 Providing and laying cement concrete 1:2:4 (1 cement : 2 2.00 m3 3,758.19
coarse Sand :4 Graded stone aggregate 20 mm nominal size)
and curing etc. complete excluding cost of form work.
09 Providing,supplying ,fixing ISI mark Ductile Iron D/F
manually gear operated SLUICE VALVE including taxes,
insurance, transportation, fright charges, Octroi Inspection,
charges, loading , unloading, conveyance to site stacking, etc.
complete valve with ISI mark only
PN 1.0 with hand wheel /cap operated (PD Type Short body)
Item Qty. Unit Rate in Rs. Amount in Rs.
10 Providing and supplying CI/DI Tamper proof /Bi Stream Air
valves with SS 304 Float gun metal nozzle of approved make
& quality of following class and diameter including all taxes,
transportation, freight charges, octroi, inspection charges,
loading, unloading, conveyance to the departmental stores,
stacking etc. complete.
With isolating sluice valve PN
11 Lowering, laying & jointing in position following air Valves 2.00 No. 526.00
including cost of all labour, jointing material, including nut
bolts & giving satisfactory hydraulic testing, etc. complete.
With Isolating Sluice Valve PN
12 Refilling the pipeline trenches including ramming, watering, 79073.00 m3 22.00
consolidating disposal of surplus stuff as directed within a
radium of 3 Km.
13 Extra rate over item of excavation of earth for excavation of
asphalt pavement/RCC of thickness upto 0.30 meter including
demolishing the asphalt carpet, metal, soiling/cutting
Reinforcement etc. comp. with stacking the material as
up to 0.30 meter (By any type of Breaker Machine or R.C.C 1489.00 Smt 200.00
Cutter machine including cost of operator, fuel &
transportation etc complete.
14 Reinstatement of Bituminous road including with 40 mm thick 1489.00 Smt 1,945.00
Bituminous Concrete using 5.4 % Asphalt ,50 mm thick DBM
using 4.5 % Asphalt with tack coat using RS 1 emulsion @
2.5 Kg/Sqm , with Tack coat using RS 1 emulsion @
Kg/Sqm, Prime coat with SS 1 emulsion @ 7.5 kg/Sqm,250
mm thick WMM , 200 mm thick GSB V loosening and
recompacting ground as per respective MoRTH specification
and as directed by engineer in charge.
15 Construction of chambers in brick masonary, locally available
in C.M. 1 : 6, foundation concrete 150 mm thick in C.C. 1:4:8
of trap metal size 25 mm to 40 mm thick, inside cement plaster
in C.M. 1:3 and cement pointing outside in C. M. 1 :3 & top
cover of precast RCC slab 100 mm thick upto 1 mt. depth
from G.L. but excl. cost of excavation and refilling. With cast
in situ RCC slab in two piece with fixing FRC frame and
cover etc. complete(excluding cost of frame & cover ) with
mm thick brick masonary wall in C.M.1:6
(1) For Sluice Valve & Air Valve
a).0.9 x 0.9 mt. and 1.0 mt. deep chamber 34.00 No. 7,738.00
b) for 1 m. extra depth 15.00 Rmt. 4,479.00
a).1.3 x 1.3 mt. and 1.0 mt. deep chamber 16.00 No. 11,351.00
b) for 1 m. extra depth 14.00 Rmt. 6,084.00
Item Qty. Unit Rate in Rs. Amount in Rs.
16 Providing F.R.C. MH seat cover incl. carting to the work site 52.00 No. 2,380.00
etc. comp. Directed. F.R.C. Extra Heavy Duty (EHD-35)
machinehole Covers & Frames Cover: 728mmø & 100 mm
thick circular cover, 35.00MT load design,100 x 2mm MS flat
all round,16mm øplain round bar for lifting the cover & should
be fitted with plastic cups. Frame:560mm ø clear opening, -
888 x 888 x 175mm. On the upper periphery off rame 25x3
mm wide MS flat should be well embed in concrete to protect
the edges off rame. FRCE.H.D.-35 machinehole cover &
frame described as above.
17 Demolition and disposal of unserviceable materials with all
i) Unreinforcement Cement Concrete 100.00 m3 639.72
18 Demolition including stacking of serviceable materials and
disposal of unserviceable materials with all lead and lift
19 Demolition of Brick work and stone masonry including
stacking of serviceable materials and disposal of unserviceable
materials with all lead and lift
i) In Cement Mortar 100.00 m3 577.92
20 Drilling of 900mm dia Horizontal borehole for watermain
pipeline crossing under the road incl in all strata with
required length incl fixing of 800 mm dia M.S casing pipe
with pushing etc complete for 200 & 250 mm dia. DIK-9 Pipe.
Without Water main & with M.S casing pipe 800 mm dia. 798.00 Rmt. 22,359.00
12 mm plate thickness MS Casing Pipe
CONSTRUCTION OF COMPOUND WALL AT PROPOSED WATER DISTRIBUTION
STATION IN TP-28, 29 OF GMC AREA
01 'Excavation for foundation for loose and soft soil including
sorting out and stacking of useful materials and disposing of
the excavated stuff up to 50 meter lead.
02 'Providing and laying cement concrete 1:2:4 ( 1 cement : 2 13.00Cu.m. 3,758.19
coarse Sand :4 Graded stone aggregate 20 mm nominal size)
and curing etc. complete excluding cost of form work.
Item Qty. Unit Rate in Rs. Amount in Rs.
03 Providing and casting in situ C.C. in grade M-25 (proportions)
as per mix design or as per table 9 of IS456 2000 in masses by
weigh batching) using granite, quartzite trap metal of size
mm to 20 mm for RCC and or 6 mm to 12 mm including
scaffolding centering, formwork, needle vibrated
consolidation, curing complete up to 6 meter depth or height
(excluding cost of reinforcement and neat finishing) with
centering and shuttering etc. complete for all water retaining
a) RCC Footing 16.00Cu.m. 8,077.00
b) RCC column 12.00Cu.m. 9,195.00
c) RCC coping 5.00Cu.m. 8,077.00
d) RCC Beam 13.00Cu.m. 8,347.00
04 Providing TMT Bar Fe-500/500D reinforcement bars for R. C. 6.00 MT 77,285.20
C. work including bending, binding and placing in position
complete upto floor two level.
05 Brick work using common burnt clay building bricks aving 34.00Cu.m. 4,502.81
crushing strength not less than 35 kg / Sq. Cm. in
superstructure above plinth in cement mortar 1:6 (1 cement :
coarse sand) etc. complete for walls, parapets etc. at two
06 20 mm thick sand faced cement plaster on walls upto height 176.00 m2 315.69
10 metres above ground level consisting of 12 mm thick
backing coat of C.M. 1:3 (1-cement : 3-sand) and 8 mm thick
finishing coat of C.M. 1:1 (1-cement : 1 sand) etc. complete.
07 Providing 15 mm thick cement plaster in single coat on Rough 176.00 m2 185.41
(Similar) side of single or half brick walls finished even and
smooth in (i) Cement mortar 1:3 (1-cement : 3 sand).
08 'Providing in line level plumb, fabricating and fixing three row 80.00 Rmt. 478.00
horizontal barbed wire fencing and punched tape concertina
coil of 9 turns per meter of 610 mm diameter fixed with clips
on top of the angle iron posts. The punched tape concertina
coil having sharp barbs at every 25 mm spacing shall be
mm thick and 19 mm width and weighing 13 kg/ 100 mtr.
(Average) as per manufacture's specification. the rate shall
also include providing and fixed 1.20 mt total long MS angle
40 x 40 x 6mm @ 3.00 mt c/c spacing embedded in RCC
column, angle posts shall be painted with one coats of red
oxide and two coats of enamel paint of approved quality at top
of compound wall.
09 Wall painting (two coats) with plastic emulsion paint of 352.00 m2 83.18
approved brand and manufacture on undecorated wall surface
to give an even shade including thoroughly brushing the
surface from mortar droppings and other foreign matter and
sand papered smooth.
Item Qty. Unit Rate in Rs. Amount in Rs.
10 Manufacturing, supplying, lowering, laying and jointing 150 8.00 Rmt. 364.00
mm dia RCC NP2 Pipe of 0.3 m long as per IS-458
specification for compound wall and fixing as per directed by
Engineer-in-charge.
11 Earthwork in embankment including breaking clods, dressing 1144.00 m
with all lead and lift including rolling of earthwork in layers
including filling in depression, including water of earth as
directed (from borrow area within 3 km lead).
12 Construction of 250 mm thick un-reinforced plain cement 900.00 Smt 1,870.00
concrete pavement with M - 40 grade of concrete including
provision of contraction, construction and longitudinal joints,
joint filler, , sealant primer, joint sealant, finishing to lines and
grades as per drawing as per MoRTH clause 602 over a
mm thick DLC with necessary excavation/loosening and
recompacting ground as per respective MoRTH specification
and as directed by engineerin charge
13 Fabricating and fixing in position MS structural section such
as flat, pipes, plates, hold fast, anchoring bolts / bars of
required size including fixing, welding and two coats of
approved anti corrosive paint over prime coat of red-oxide
including RCC gate column as per drawing etc. complete as
directed by Engineer-in-charge.
a) 2.2 m height and 6 m wide main and wicket gate 650 Kg. 88.38
14 Labour charges for writing of capital letter "GMC" in green 27.00 No 277.00
plaster of 30 cm height, 25 mm thick & 12 mm embossed as
per given detail in outside of compound wall as instructed by
Engineer in charge.
15 Providing and fixing pre-cast Rubber Dye / steel Dye inter 2859.00 Smt 706.90
locking concrete block 60mm thick with grade of concrete
M300 pnumatic compressed / vibrated mechanically and as
per approved design Confirming to IS 15658 : 2006 including
35 mm Sand layer for levelling and filling the joint with sand
in proper line and level as per guidlines of IRC : SP 63-2018
OPERATION & MAINTENANCE WORK
Item Qty. Unit Rate in Rs. Amount in Rs.
1.1.1 During First Year 12 Months 82,945.00
The works of this schedule comprises of the supply of all spare parts
as required including the supply of all labour (including reliever to
ensure presence of specified type and no. of manpower per shift),
materials, consumables (except electrical power), equipment, tools
and tackles and comprehensive operations and maintenance of the
WATER DISTRIBUTION STATION during the O & M period
from the date of successful commissioning.
Total staff salary for O&M period (of 24 months) for Operation,
security, repairing and maintenance for the complete O&M period
a) Pump operator cum SCADA operator (ITI-Wireman/Eletrician) (3
nos - One for each shift of 8 hrs.)
b) Instru. Techanician for WDS & Dist. Network (ITI-Instru.)
(at General shift of 8 hrs.)
1.1.2 Total of Manpower for Second Year 12 Months 91,240.00
1.2.1 Security cum helper-(10th-of age < 45 years) (3 nos. - One for each 12 Months 55,389.00
shift of 8 hrs.)
1.2.2 Total of Manpower for Second Year 12 Months 60,928.00
Comprehensive Maintenance
2.1.1 Comprehensive repairing, spares and maintenance of entire works 12 Month 24,800.00
alongwith administration & management charges including running
office, cost of lubricants, consumables, spares, tools,statutory
periodical approvals & testing of eqipments etc. required in all except
supply of ele. power and sewage during O&M period (for First Year
(Covered under Defect Liablity Period for First Year and
consumables @0.5% of EMI cost)
2.1.2 Total of Comprehensive Maintenance for Second Year (0.75% for 12 Months 68,196.58
spare + 0.5% for consumables)
3.1.1 Other Expenses
a) 100 mbps Leaseline with Static IP expense for SCADA System 24 Month 800.00
at WDS including renewal fees, license charges and any other
charges as applicable for remote data received at WDS SCADA
from distribution network.
b) Monthly charges for SIM card for data received from ESR & 24 Month 2,500.00
Distribution Network to WDS SCADA and SMS to concern
c) 900 kg Chlorine Tonners - loading, unloading, to & fro 24 Months 5,802.00
transportaiton to site etc. as applicable.
Grand Total Rs. (A+B+C+D+E+F+G+H+I+J+K+L)
Grand Total Rs. (A+B+C+D+E+F+G+H+I+J+K+L)
Item Qty. Unit Rate in Rs. Amount in Rs.
I/We am/are willing to carry out the work at ________% above/below percent (should be written in figures and words) of the
estimated rate mentioned above. Amount of my / our tender works out as under .
Estimated amount put to tender Estimated amount put to tender
Deduct____% below Add____% Above
In words In words
1 All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as
2 All columns in the Schedule should be filled in ink and the total of the entire in the last columns should be struck by
the contractor under his signature.
3 Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for
work under all conditions, site, moisture, weather etc.
4 To be continued on additional sheets, if found necessary.
5 The Labour Cess will be deducted as per prevailing rules i.e.1% of the work done.
6 GST is applicable seperatly for all type of works by the Client (Total Tender Cost is without GST).
7 The bituminous work shall be carried out by the contractor or as under by utilizing.
8 For abnormal high or law rates payment of such items shall be regulated as per Govt. Circular letter No. Parach-
102008-61-S dated 27-11-2008 attached with tender papers.
9 From dt. 1-7-2017 GST is applicable hence Agency should quote price accoringly. Any dispute regarding this will not
be considered by GMC.
10 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-
Charge for which no extra payment shall be made.
11 GST and Income tax TDS will be deducted at a source while making payments of bills.
12 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017
Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as
per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item
at the rate of input rate mentioned in SOR used for preparation of Estimate.
Signature of Contractor
The Deputy Commissioner
Gandhinagar Municipal Corporation (GMC),
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
sbd.pdf
boq.pdf
01.LAYOUT OF WDS AT TP-28-29 R1.pdf
02.GAD OF WDS TP-28-29 R1.pdf
03.Water Supply Network-TP-28-29_2024.09.03.pdf
04.Water Supply Network-TP-28-29_2024.09.03_OFFTAKE.pdf
05-Mech. GAD OF WDS TP-28-29-R0-24.02.2026.pdf
06.-11kV HT SLD-R0-01.03.2025.pdf
07.-L.T. SLD-R0-01.03.2025.pdf
08-HT and LT Cable laying details-01.03.2025.pdf
09-Typical Outdoor Lighting POLE Detail-01.03.2025.pdf
10-Typical Earthing Layout-.pdf
11.0-11 kv.pdf
Download all tender documents and submit your bid