Providing Flood Protection for Jawal Khad and Bagasaid Nallah Tehsil Thunag Distt Mandi HP

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/ Manual means over areas(exceeding 30cm in depth, 1.5meters in width as well as 10 sqm on plan) i/c getting out and disposal of excavated earth lead up to 50 meters and lift up to 1.50 meters as directed by Engineer-IN-Charge.

Cutting in earth work in by mechanical means (Hydraulic excavator)/Manual means over areas i/c getting out and disposal of excavated earth lead up to 50 meters and lift up to 1.50 meters as directed by Engineer-In-Charge.

Providing and laying cement concrete 1:3:6(1cement:3sand:6 crushed stone agg. 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work complete in all respects within all leads and lifts as per direction of the Engineer-in-Charge in: a) Vertical surfaces such as walls(any thickness) partions and the like including attached pillasters,buttresses plinth and string courses and the like in all leads and lifts as per entire satisfaction of Engineer-in-Charge.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm, so as to give a fair finish including centering ,shuttering, propping etc.with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plain concrete work in:-

Vertical surfaces such as walls(any thickness) partions and the like including attached pillasters,buttresses plinth and string courses and the like in all leads and lifts

Making Wire crates made of HD dip GI wire confirming to IS 280-2006 with all latest amendements with zink coating confirming to table-I of IS-4826/1979 hand woven (double twisted) filled with boulders with square cut faces against the wire(Boulder filling to be measured and paid for separately) ,GI wire 5mm thick corresponding to SWG-6 of size 15x15Cm mesh in apron and sloping pitching complete in all leads and lifts including carriage of materials and to the entire satisfaction of the Engineer-in-charge.( L.R.)

Wire crates made of GI wire filled with boulders of approved quality with square cut faces against the wire having rounded rectangular shape,weight of boulders shall be not less than 18kg.and free from salt spots crakes,cavities etc.(wire crates to be measured and paid for separately)including carriage of materials upto all leads and lifts and as per the entire satisfaction of the Engineer-in-charge.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level in all leads and lifts.

Devender Kumar

APPLEBEE SYSTEMS PVT LTD

Royal Construction Company

Lalit Pal

MOHAMMAD SALMAN

BAL CHAND WALIA

VIVEK KUMAR

Pankaj Thakur contractor

MNBN Enterprises

ABHINAV KAUSHAL GOVT CONTRACTOR