Building

Name of Work :- Annual Rate Contract for Civil Works for various Health care Facilities in Ahmedabad

City Area. (Out Side Civil Hospital Campus)

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

1 Excavation for foundation up to 1.5mt. depth including sorting out

and stacking of useful materials and disposing of the excavated Rupees One hundred Seventeen Paise

stuff up to 50 meter lead. (A) Loose or soft soil Eight Only

2 (B) Dense or hard soil Rupees One hundred Forty Nine Paise

Sixty Seven Only

3 (C) Hard Murrum Rupees Two hundred Fifty Six Paise

4 Excavation for foundation from 1.5 mt. to 3.0 mt. depth including

sorting out and stacking of useful materials and disposing of the Rupees One hundred Twenty Nine Paise

excavated stuff up to 50 meter lead. (A) Loose or soft soil Eighty One Only

5 (B) Dense or hard soil Rupees One hundred Sixty Two Paise

Thirty Eight Only

6 (C) Hard Murrum Rupees Two hundred Seventy Three

Paise Fifty Four Only

7 Excavation for foundation from 3.0 mt. to 5.0 mt. depth including

sorting out and stacking of useful materials and disposing of the Rupees One hundred Forty Two Paise

excavated stuff up to 50 meter lead. (A) Loose or soft soil Fifty Two Only

8 (B) Dense or hard soil Rupees One hundred Seventy Four

Paise Twenty Two Only

9 (C) Hard Murrum Rupees Two hundred Eighty Five Paise

Seventy Three Only

10 Extra for additional depth more than 5.0 mt for excavation for

foundation including sorting out and stacking of useful materials

cum Rupees Twenty One Paise Twelve Only

and disposing off the excavation stuff upto 50 mt lead. (A) Loose or

11 (B) Dense or hard soil.

cum Rupees Twenty One Paise Twelve Only

12 (C) Hard murrum

cum Rupees Twenty Nine Paise Four Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

13 Add extra for disposing off the excavated stuff of above items for

cum Rupees Seventeen Paise Forty Five Only

lead of (A) 50 mt to 100 mt.

14 (B) 100 mt to 200 mt. Rupees Thirty Four Paise Ninety One

cum Rupees Fifty Two Paise Thirty Six Only

16 (D) 300 mt to 400 mt. Rupees Seventy Seven Paise Fifty

17 (E) 400 mt to 500 mt. Rupees One hundred Twenty Nine Paise

Twenty Eight Only

18 Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20cm in depth Rupees One hundred Thirty Paise Thirty

consolidating each deposited layer by ramming & watering. Nine Only

19 Filling in plinth with sand under floors including watering, ramming, Rupees Four hundred Sixty Paise

consolidating and dressing etc. complete. Nineteen Only

20 Filling foundation and plinth with murrum or selected soil in layers

Rupees Two hundred Eighty Nine Paise

of 20 cm. thickness including watering, ramming and consolidation cum

21 Filling foundation and plinth with brickbats / chhara in layers of

cm. thickness including watering, ramming and consolidation etc. cum Rupees Six hundred Paise Fifty Six Only

22 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse

sand : 6 Hand broken stone aggregates 40 mm nominal size) and Rupees Three Thousand Five Paise

curing etc complete excluding cost of form work in (A) Foundation Seventy Six Only

23 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse

sand : 8 Hand broken stone aggregates 40 mm nominal size) and Rupees Two Thousand Six hundred

curing etc complete excluding cost of form work in (A) Foundation Eighty Paise Twenty One Only

24 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse

sand : 6 crushed stone aggregates 20 mm nominal size) and curing Rupees Four Thousand Forty Six Paise

etc complete including cost of form work in (A) Wall caps / copings. Twenty One Only

25 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse

Rupees Two Thousand Nine hundred

sand : 6 brickbats) and curing etc complete excluding cost of form cum

Eighty Six Paise Only

work in (A) Foundation and plinth

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

26 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse

Rupees Two Thousand Six hundred

sand : 8 graded brick bats) and curing etc complete excluding cost cum

Sixty Paise Forty Five Only

of form work in (A) Foundation and plinth

27 Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) and curing Rupees Three Thousand Six hundred

etc complete excluding cost of form work in (A) Foundation and Ninety Seven Paise Ninety One Only

28 (B) Independent pipes, columns and pillars upto floor two level.

Rupees Three Thousand Six hundred

Ninety Seven Paise Ninety One Only

29 Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) and curing

Rupees Three Thousand Nine hundred

etc complete excluding cost of form work & reinforcement for cum

Sixty Two Paise Seventy Seven Only

reinforced concrete work in (A) Foundations, footings of columns

and mass concrete.

30 (B) Slabs, landings, shelves, balconies, lintels, beams, girders and Rupees Four Thousand Fifty Two Paise

cantilever upto floor two level. Fifty Nine Only

31 (D) Columns, pillars, posts & struts upto floor two level. Rupees Four Thousand Fifty Two Paise

Fifty Nine Only

32 (E) Staircases excluding landing upto floor two level. Rupees Four Thousand Eight hundred

Thirteen Paise Twelve Only

33 (F) Vertical and horizontal fins upto floor two level.

Rupees Four Thousand Two hundred

Eighty Three Paise Fifty Six Only

34 Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) for

reinforced concrete chhajjas not exceeding 10 cm thickness upto Rupees Six Thousand Five hundred

floor two level including finishing the exposed surfaces with cement cum

Fifty One Paise Ninety Four Only

mortar 1:3 (1 cement : 3 fine sand) to give a smooth and even

surface centering and form work and curing etc complete excluding

cost of reinforcement.

35 Providing Thermo Mechanically Treated Bars (TMT Bars) FE

Rupees Seventy Six Paise Twenty One

Dreinforcement for R.C.C. work including bending, binding and kg

placing in position complete up to floor two level.

36 Extra for additional lift of concrete for all R.C.C work above floor

per floor per cum

Rupees Forty Paise Twenty Five Only

two level excluding cost of reinforcement.

37 Extra for additional lift of reinforcing steel for all R.C.C work above

per floor per kg. Rupees Paise One hundred Only

floor two level.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

38 Deduct for omitting in R.C.C work smooth finishing of the exposed

Rupees One hundred Forty One Paise

surface with cement mortar 1:3 (1 cement : 3 fine sand) sqm

Sixty Five Only

39 Providing throating or plaster drip and moulding to R.C.C chhajja.

m Rupees Forty One Paise Sixty Six Only

40 Providing upto floor two level precast cement concrete jali or grill

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm

nominal size) reinforced with 1.60 mm diameter mild steel wire Rupees Seven hundred Eight Paise

including roughening, cleaning fixing and finishing in cement mortar Twenty Six Only

1:3 and curing complete (A) 50 mm thick.

41 (B) 40 mm thick. Rupees Six hundred Forty Six Paise

42 (C) 25 mm thick. Rupees Six hundred Fourteen Paise

Ninety Four Only

43 (D) 75 mm thick. Rupees Seven hundred Sixty Six Paise

Fifty Nine Only

44 Extra for additional lift for providing and fixing in position precast

per floor per sqm Rupees Ten Paise Three Only

R.C.C units above floor two level.

45 P & L damp Proof Course 25 mm thick Cement Concret 1:2:4 (1

Rupees Three hundred Eleven Paise

Cement : 2 Course Sand : 4 Stone aggregate) and Curing Complete. sqm

Sixty Four Only

46 Extra for providing and mixing water proofing material in cement

in litere or kg per quintalRupees

concrete in mix proportion recommended by the manufactures. of cement

Forty Nine Paise Sixteen Only

47 Providing and laying controlled cement concrete M-150 and curing

complete excluding the cost of form work and reinforcement (A) Rupees Three Thousand Nine hundred

Foundations, footings, base of columns and mass concrete. Ten Paise Ten Only

48 (B) Walls from top of foundation level upto floor two level.

Rupees Four Thousand One hundred

Ninety Four Paise Seventy Six Only

49 (C) Slabs, landings, shelves, balconies, lintels, beams, girders and

Rupees Four Thousand One hundred

cantilever upto floor two level. cum

Seventy Paise Seventy One Only

50 (D) Columns, pillars, posts and struts upto floor two level.

Rupees Four Thousand Two hundred

Sixty Nine Paise Fifty Three Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

51 (E) Staircases upto floor two level.

Rupees Five Thousand One hundred

Eighty Five Paise Thirty Three Only

52 (K) Vertical and horizontal fins upto floor two level. Rupees Four Thousand Five hundred

Fifty Four Paise Fifty Only

53 Providing and laying controlled cement concrete M-200 and curing

complete excluding the cost of form work and reinforcement (A) Rupees Four Thousand Seventeen Paise

Foundations, footings, base of columns and mass concrete. Sixty Six Only

54 (B) Walls from top of foundation level upto floor two level.

Rupees Four Thousand Five hundred

Twenty Nine Paise One Only

55 (C) Slabs, landings, shelves, balconies, lintels, beams, girders and Rupees Four Thousand Five hundred

cantilever upto floor two level. Four Paise Ninety Six Only

56 (D) Columns, pillars, posts and struts upto floor two level.

Rupees Four Thousand Six hundred

Three Paise Seventy Eight Only

57 (E) Staircases upto floor two level.

Rupees Five Thousand Four hundred

Seventy Three Paise Ten Only

58 (K) Vertical and horizontal fins upto floor two level.

Rupees Four Thousand Seven hundred

Forty Eight Paise Ninety Nine Only

59 Providing and laying controlled cement concrete M-250 and curing

complete excluding the cost of form work and reinforcement (A) Rupees Four Thousand Two hundred

Foundations, footings, base of columns and mass concrete. Eighty Paise Forty Two Only

60 (B) Walls from top of foundation level upto floor two level. Rupees Four Thousand Five hundred

Sixty Five Paise Eight Only

61 (C) Slabs, landings, shelves, balconies, lintels, beams, girders and Rupees Four Thousand Five hundred

cantilever upto floor two level. Forty One Paise Three Only

62 (D) Columns, pillars, posts and struts upto floor two level.

Rupees Four Thousand Six hundred

Thirty Nine Paise Eighty Five Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

63 Providing and laying in position Ready Mixed M- 150 grade concrete

for reinforced cement conctere work , using cement content as per

approved Design Mix manufactured in fully automatic batching

plant and transported to site of work in

transit mixer for a lead up to 10 kms having continuous agitated

mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of centering Rupees Three Thousand Eight hundred

shuttering finishing and reinforcement including cost of admixtures Twenty Eight Paise Eleven Only

in recommended proportions as per IS: 9103 to accelerate/ retard

setting of concrete, improve workability without impairing strength

and durability as per direction of

the Engineer - in - charge. Without Fly Ash (Min cement level as

per latest IS 456 shall be maintained)

64 Providing and laying in position Ready Mixed M- 200 grade concrete

for reinforced cement conctere work , using cement content as per

approved Design Mix manufactured in fully automatic batching

plant and transported to site of work in

transit mixer for a lead up to 10 kms having continuous agitated

mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of centering Rupees Four Thousand Eight hundred

shuttering finishing and reinforcement including cost of admixtures Forty One Paise Three Only

in recommended proportions as per IS: 9103 to accelerate/ retard

setting of concrete, improve workability without impairing strength

and durability as per direction of

the Engineer - in - charge. Without Fly Ash (Min cement level as

per latest IS 456 shall be maintained)

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

65 Providing and laying in position Ready Mixed M- 250 grade concrete

for reinforced cement conctere work , using cement content as per

approved Design Mix manufactured in fully automatic batching

plant and transported to site of work in

transit mixer for a lead up to 10 kms having continuous agitated

mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of

centering shuttering finishing and reinforcement including cost of Rupees Four Thousand Nine hundred

admixtures in recommended proportions as per IS: 9103 to Two Paise Ten Only

accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of

the Engineer - in - charge. Without Fly Ash (Min cement level as

per latest IS 456 shall be maintained) (Cement level 450 kg )

66 Providing and laying in position Ready Mixed M- 300 grade concrete

for reinforced cement conctere work , using cement content as per

approved Design Mix manufactured in fully automatic batching

plant and transported to site of work in

transit mixer for a lead up to 10 kms having continuous agitated

mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of

centering shuttering finishing and reinforcement including cost of Rupees Five Thousand Ninety Four

admixtures in recommended proportions as per IS: 9103 to Paise Ten Only

accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of

the Engineer - in - charge. Without Fly Ash (Min cement level as

per latest IS 456 shall be maintained) (Cement level 475 kg )

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

67 Brick work using common burnt clay building bricks having crushing

strength not less than 35kg/Sqcm. in foundation and plinth. In Rupees Four Thousand Three hundred

cement mortar 1:5 (1 cement : 5 fine sand) (A) Modular Eighty Eight Paise Forty Seven Only

68 (1 cement : 5 fine sand) (B) Conventional Rupees Four Thousand Fifty One Paise

Seventy Eight Only

69 Brick work using common burnt clay building bricks having crushing

strength not less than 35kg/Sqcm. in foundation and plinth. In Rupees Four Thousand Two hundred

cement mortar 1:6 (1 cement : 6 fine sand) (A) Modular Eighty Four Paise Twelve Only

Rupees Four Thousand Twenty One

70 (B) Conventional cum

71 Extra for brickwork in superstructure above plinth level upto floor Rupees Two hundred Sixty Four Paise

per floor per cum

two level. (A) Modular Ninety Seven Only

72 (B) Conventional Rupees Two hundred Seventy Four

per floor per cum

Paise Ninety Seven Only

73 Extra for brickwork in superstructure above floor two level. (A) Rupees Forty Two Paise Eighty Four

per floor per cum

Modular Item No 6.13 Only

74 (B) Conventional Item No 6.13 per floor per cumRupees Forty Paise Nineteen Only

75 Extra for brickwork in superstructure above floor two level. (A) Rupees Forty One Paise Seventy Three

per floor per cum

Modular Item No 0.0 Only

76 (B) Conventional Item No 0.0 Rupees Thirty Eight Paise Ninety Five

per floor per cum

77 Extra for brickwork in superstructure above floor two level. (A) Rupees Forty One Paise Eighty Three

per floor per cum

Modular Item No 0.0 Only

78 (B) Conventional Item No 0.0 per floor per cumRupees Thirty Nine Paise Six Only

79 Extra for brickwork in superstructure above floor two level. (A)

per floor per cum

Rupees Forty One Paise Sixty Four Only

Modular Item No

80 (B) Conventional Item No 0.0 Rupees Twenty Nine Paise Twenty One

per floor per cum

81 Half brick masonry in common burnt clay-building bricks having

2 Rupees Five hundred Ninety Paise Fifty

crushing strength not less than 35kg/cm in cement mortar 1:4 (1 sqm

cement : 4 coarse sand) (A) Modular

82 Half brick masonry in common burnt clay-building bricks having

Rupees Five hundred Ninety Nine Paise

crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 sqm

Eighty Four Only

cement : 4 coarse sand) (B) Conventional

83 Half brick masonry in common burnt clay-building bricks having

Rupees Five hundred Eighty One Paise

crushing strength not less than 35kg/cm2 in cement mortar 1:5 (1 sqm

cement : 5 coarse sand) (A) Modular

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

84 Half brick masonry in common burnt clay-building bricks having

Rupees Five hundred Eighty Nine Paise

crushing strength not less than 35kg/cm2 in cement mortar 1:5 (1 sqm

Thirty Two Only

cement : 5 coarse sand) (B) Conventional

85 Half brick masonry in common burnt clay-building bricks having

crushing strength not less than 35kg/cm in cement mortar 1:3 (1 Rupees Six hundred Fifty One Paise

cement : 3 coarse sand) with 2 Nos of 6 mm mild steel round bars sqm

after every three course embedded in cement mortar in foundation

and plinth. (A) Modular

86 (A) Conventional Rupees Six hundred Sixty Three Paise

Twenty One Only

87 Extra for half brick masonry in superstructure above plinth two Rupees Forty Eight Paise Thirty Three

level. (A) Modular. Only

88 Extra for half brick masonry in superstructure above plinth two Rupees Fifty Three Paise Thirty Three

level. (B) Conventional. Only

89 Extra for half brick masonry in superstructure above floor two level.

sqm Rupees Five Paise Ninety One Only

90 Extra for half brick masonry in superstructure above floor two level.

sqm Rupees Five Paise One hundred Only

(B) Conventional

91 Masonary work using Aerated light weight concrete block having

crushing strength not less than 35 kg/sqcm for super structure

Rupees Four Thousand Five hundred

above plinth level upto floor two level in cement mortar 1:5 ( 1 Cmt

Twenty Eight Paise Fifty Seven Only

cement : 5 fine sand ) complete as per Technical Specification

92 Providing and laying Precast Lightweight concrete hollow core wall

with hollow core concrete unit of approved make & size of 92 mm

thick, 600 mm wide and 2400 mm / 2600 mm / 2850 mm /

mm / 3300 mm in legth made from of controlled Rupees Seven hundred Fifty Four Paise

cement concrete M20 having cube compressive strength not less Forty Seven Only

than 20 MPa jointing with high strength & tensile adhesion non-

shrink cementitious joint compound / P.U. Foam. (Plaster

93 Precast concrete block masonry (including quoin blocks, jamb

blocks, closer etc.) with solid concrete block of approved size made

of cement concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded Rupees Two Thousand Seven hundred

stone aggregates of 20 mm and down gauge) in foundation and Forty Five Paise Twenty Eight Only

plinth in cement mortar 1:6

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

94 Extra for masonry work with precast concrete block in Rupees Two hundred Seventy Four

superstructure above plinth upto floor two level. Paise Ninety Seven Only

95 Providing wood work in frames of doors windows clearstory

windows & other similar works, wrought framed and fixed in 10 Cu Dm Rupees Six hundred Eight Paise Six Only

position (A) Indiad teak wood.

96 Providing wood work in trusses, purlins, rafters, posts, post plates,

Rupees One Thousand Three hundred

wall plates and the like wrouht, framed hoisted & fixed in position 10 Cu Dm

Fifty Paise Thirty Five Only

(A) Indiad teak wood.

97 Providing wood work in frames of false ceiling, partitions etc. swan Rupees Six hundred Sixty Paise Forty

and put up in position (A) Indiad teak wood. Two Only

98 Providing and fixing 35 mm thick shutters for doors and windows &

clearstory windows including anodised alluminium butt hinges with Rupees Three Thousand Nine hundred

necessary screws. (A) Indian teak wood (I) Fully panelled. Forty One Paise Thirty Seven Only

99 (A) Indian teak wood (II) Fully glazed. Rupees Three Thousand Two hundred

Forty Four Paise Eight Only

100 (A) Indian teak wood (III) Partly panalled & partly glazed.

Rupees Three Thousand Five hundred

Ninety Two Paise Seventy Two Only

101 Providing and fixing 35 mm thick shutters for doors and windows &

clearstory windows including black enamelled butt hinges with Rupees Three Thousand Six hundred

necessary screws. (A) Indian teak wood (I) Fully panalled. Fifty Six Paise Sixty Seven Only

102 (A) Indian teak wood (II) Fully glazed.

Rupees Two Thousand Nine hundred

Fifty Nine Paise Thirty Eight Only

103 (A) Indian teak wood (III) Partly panalled & partly glazed. Rupees Three Thousand Three hundred

Eight Paise Three Only

104 Providing and fixing 25 mm thick shutters for cupboards including

Rupees Three Thousand Sixty Four

anodised alluminium butt hinges with necessary screws. (A) Indian sqm

Paise Forty Four Only

teak wood (I) Fully panelled.

105 (A) Indian teak wood (II) Fully glazed.

Rupees Two Thousand Six hundred

Twenty Paise Sixty Nine Only

106 (A) Indian teak wood (III) Partly panalled & partly glazed.

Rupees Two Thousand Eight hundred

Forty Two Paise Fifty Six Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

107 Providing and fixing 25 mm thick shutters for cupboards including

Rupees Three Thousand Thirty Six

black enamelled M.S butt hinges with necessary screws. (A) Indian sqm

Paise Eighty Two Only

teak wood (I) Fully panelled.

108 (A) Indian teak wood (II) Fully glazed.

Rupees Two Thousand Five hundred

Ninety Three Paise Five Only

109 (A) Indian teak wood (III) Partly panalled & partly glazed.

Rupees Two Thousand Eight hundred

Fourteen Paise Ninety Three Only

110 Add extra for providing & fixing 40 mm thick shutters instead of 35 Rupees Two hundred Three Paise Three

mm thick shutters. Only

111 Providing and fixing 35 mm thick shutters for doors and windows &

clearstory windows including anodised alluminium butt hinges with Rupees Two Thousand Four hundred

necessary screws. (A) Indian teak wood (A) Plywood sheet pannels. Eighty Three Paise Sixty Eight Only

112 (A) Indian teak wood (B) Particle board panels.

Rupees Three Thousand Four hundred

Ninety Nine Paise Sixteen Only

113 (A) Indian teak wood (C) Hard board panels.

Rupees Three Thousand Four hundred

Sixty Seven Paise Ninety Nine Only

114 Providing and fixing 35 mm thick shutters for doors and windows &

clearstory windows including black enamelled M.S butt hinges with Rupees Three Thousand Two hundred

necessary screws. (A) Indian teak wood (A) Plywood sheet panels. Ten Paise Sixty Seven Only

115 (A) Indian teak wood (B) Particle board panels.

Rupees Three Thousand Two hundred

Fifteen Paise Eighty Five Only

116 (A) Indian teak wood (C) Hard board panels.

Rupees Three Thousand One hundred

Eighty Four Paise Sixty Eight Only

117 Providing and fixing flush door shutters solid core construction with

frame of first class hard wood with cross band and face veneer or

plywood face panels including anodized alluminium butt hinges with Rupees One Thousand Seven hundred

necessary screws, (B) Non-decorative type & block board core Ninety Seven Paise Seventy Seven Only

anodized alluminium butt hinges in flush door shutters 35 mm. thick

118 Extra for using bright finished M.S piano hinges of (A) Nickel plated Rupees Eight hundred Ninety Two Paise

piano hinges. Two Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

119 Extra for providing vision panel not exceeding 0.10 Smt in all type Rupees Twenty Four Paise Thirty Five

sqm of door area

of flush doord (A) Rectangular or square. Only

120 Providing and fixing 30 mm. thick wire gauge shutters using

galvanised M.S. wire of I.S gauge designation 85 G. with wire of

Rupees Two Thousand Seven hundred

0.56 mm. dia. for doors, windows and clearstory windows including sqm

Six Paise Seven Only

anodised alluminium butt hinges with necessary screws. (A) Indian

121 Providing and fixing 30 mm. thick wire gauge shutters using

galvanised M.S. wire of I.S gauge designation 85 G. with wire of

0.56 mm. dia. for doors, windows and clearstory windows including Rupees One Thousand Two hundred

bright finished or/and black enamelled M.S. butt hinges with Twenty Eight Paise Two Only

necessary screws mango wood or equivalent quality.

122 Extra for providing & fixing galvanised M.S wire guage of I.S guage

designation 140 G to doors windows & clearstory windows with Rupees Twenty Nine Paise Twenty One

wire of diameter 0.71 mm instead of I.S guage designation 85 G Only

with wire of diameter 0.56 mm.

123 Providing and fixing 12 mm thick & 100 mm wide pelmet of flat

pressed 3 layer veneered particle board solid core with 25 mm

Rupees Two hundred Thirteen Paise

diameter alluminium curtain rod and brackets including fixing with m

Fifty Seven Only

25 mm x 3 mm M.S flat 10 cm long & plugs etc. complete.

124 Providing and fixing 40 mm panelled, glazed or panelled & glazed

partitions fixed to frames with iron screws etc. complete with Rupees Three Thousand Four hundred

Indian teak wood (frames to be paid separately.) Thirty Four Paise Twelve Only

125 Providing and fixing decorative plywood 4 mm thick in partition

including fixing in frames with screws etc. complete with 50 mm x Rupees Five hundred Twenty One Paise

12 mm teakwood beading. (frames to be paid separately.) Seventy Seven Only

126 Providing and fixing in partitions 4 mm thick medium hard board of

approved quality including fixing to frames with screws etc. Rupees Five hundred Twenty One Paise

complete with 50 mm x 12 mm teak wood beading. (Frames to be Seventy Seven Only

paid separately)

127 25 mm. thick wooden shelves supported on 40 x 40 x 6 mm. T or L

iron brackets fixed at suitable distances but not exceeding 75 cm. Rupees One Thousand Three hundred

apart with mango wood or equivalent quality. Nineteen Paise Sixty Eight Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

128 40 mm. thick wooden shelves supported on 40 x 40 x 6 mm. T or L

iron brackets fixed at suitable distances but not exceeding 75 cm Rupees One Thousand Seven hundred

apart with mango wood or equivalent quality. Seven Paise Ninety One Only

129 Providing and fixing M.S round or square bars wirh flats at required

Rupees Sixty Nine Paise Twenty Two

spacings in wooden frames of windows & clearstory windows. kg

130 Providing & fixing M.S. grills of required pattern to wooden frames

of windows etc. with M.S. flats at required spacing & frame around, Rupees One hundred One Paise

square or round bars with round headed bolts & nuts or by Seventeen Only

screws(A)Plain grill.

131 (B)Ornamental grill. Rupees One hundred Forty Five Paise

132 Providing and fixing fly proof galvanised M.S. wire gauge of I.S.

gauges designation 85 G. with wire of dia. 0.56 mm. to windows Rupees Six hundred Sixty Nine Paise

and clearstory windows including 60 x 20 mm. beading of Indian Ninety Four Only

133 Providing and fixing first class Indian teak wood 75 mm x 60 mm Rupees Four hundred Eighty Nine Paise

moulded hand rails in straight lengths complete. Twelve Only

134 (I) Providing & fixing glazed louvered glass windows and ventilator

Rupees Four Thousand One hundred

with teak wood frame 10 cm x 7 cm size including two coats of oil sqm

Forty Three Paise Fifty Seven Only

painting to wood work etc. complete.

135 (II) Providing & fixing glazed louvered glass windows and ventilator

with teak wood frame 10 cm x 7 cm size including two coats of oil Rupees Four Thousand Three hundred

painting to wood work etc. complete with wooden louvers plank 12 Seventy Five Paise Seventy Nine Only

136 Providing and fixing 35mm th. shutters for doors, windows & clear

storey windows including Indian teak wood frames 10 cm x 7 cm

Rupees Four Thousand Six hundred

size including anodised alluminium fixtures & fastening including sqm

Forty One Paise One Only

primer coat of approved quality and two coats of oil paint etc.

complete. (I) Fully glazed.

137 (II) Fully panalled.

Rupees Five Thousand Three hundred

Thirty Eight Paise Thirty Only

138 (III) Partly panalled & partly glazed.

Rupees Four Thousand Nine hundred

Eighty Nine Paise Sixty Five Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

139 Providing and fixing 35mm th. shutters for doors, windows & clear

storey windows including Indian teak wood frames 10 cm x 7 cm

Rupees Four Thousand Six hundred

size including black enamelled iron oxidised fixtures & fastening sqm

Forty One Paise One Only

including primer coat of approved quality and two coats of oil paint

etc. complete. (I) Fully glazed.

140 (II) Fully panalled.

Rupees Five Thousand Three hundred

Thirty Eight Paise Thirty Only

141 (III) Partly panalled & partly glazed.

Rupees Four Thousand Nine hundred

Eighty Nine Paise Sixty Five Only

142 Add extra for providing and fixing 40 mm thick shutters instead of

Rupees Two hundred Seventy Two Paise

35 mm thick shutters including oil painting etc. complete. sqm

143 Deduct for providing and fixing 25 mm thick shutters instead of 35 Rupees Four hundred Forty Four Paise

mm thick shutters including oil painting etc. complete. Twenty Two Only

144 Providing and fixing 30mm thick FACTORY MADE SOLID PANEL

PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of

19 gauge thickness and size of 19mm x 19mm for stiles and 15mm

x 15 mm for top and bottom rails. M.S. frame shall have a coat of

steel primers of approved make and manufacture, M.S. frame shall

be covered with 5 mm thick heat moulded PVC ‘C’ channel of size

30 x 50 mm forming stiles, and 5mm thick 75mm wide PVC sheets

for top rail, lock rail and bottom rail on either side, and 10mm

(5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top Rupees One Thousand One hundred

rail and bottom rail, Panelling of 5 stiles and rails with 30mm wide x Forty Six Paise Thirty Seven Only

5mm thick PVC sheet beading on eighter side, and joined together

with solvent cement adhesive,. An additional 5mm thick PVC strip

of 20mm width is to be stculk on the interior side of the ‘c’ channel

using PVC solvent cement adhesive etc. complete as per direction

of Engineer in charge, manufacture’s specification and drawing.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

Providing and fixing 30mm thick FACTORY MADE SOLID BOTH

SIDE PRELAM PANEL PVC DOOR SHUTTER consisting of frame

made out of M.S. tubes of 19 gauge thickness and size of 19mm x

19mm for stiles, top and bottom rails. M.S. frame shall have a coat

of steel primer of approved makde and manufactures. M.S frame

covered with 5mm thick heat moulded prelim PVC ‘C’ channel of siz

30mm thickness, 70 mm width of which 50mm shall be flat and

20mm shall be tapered in 45 degree Angle on either side forming

stiles, and 5mm thick, 95mm wide pream PVC sheet out of which

75mm shall be flat and 20mm shall be tapered in 45 degree on the

inner side ot form top and bottom rail and 115mm wide prelim PVc

Rupees Two Thousand Two hundred

sheet out of which 75nmm shall be flat and 20mm shall be tapered sqm

Thirty Six Paise Fourteen Only

on both side to form lock rail, Top, bottom and lock rails shall be

provided either side of the panel. 10mm (5mm x 2) thick 20mm

wide cross PVC sheet shall be provided as gap insert for top rail

and bottom rails. Panelling of 5mm thck both side prelim PVC sheet

to be fitted in the M.S. frame welded,sealed to the stiles and rails

with 7mm (5mm + 2 mm) thick x 15mm wide PVC sheet beading

on inner side, and joined togeth with solvent cement adhesive. An

additional 5mm thick PVC strip of 20mm width is to be stuck on the

interior side of the ‘C” chanel using PVC solvent adhesive etc.

complete as per direction of Engineering in charge, manufacture’s

specification and rawing.

the M.S. frame welded,sealed to the stiles and rails with 7mm

(5mm + 2 mm) thick x 15mm wide PVC sheet beading on inner

side, and joined togeth with solvent cement adhesive. An additional

5mm thick PVC strip of 20mm width is to be stuck on the interior Rupees Only

side of the ‘C” chanel using PVC solvent adhesive etc. complete as

per direction of Engineering in charge, manufacture’s specification

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

146 Providing and fixing 30mm thick FACTORY MADE SOLID SINGLE

SIDE PRELAM PANEL PVC DOOR SHUTTER consisting of frame

made out of M.S. tubes of 19 gauge thckness and size of 19mm x

19mm for stiles, and 15mm x 15mm for top and bottom rails. The

M.s. frame shall have coat of steel primers of approved makde and

manufacture. The M.S. frame shall be covered with 5mm thick heat

moulded single side prelim PVC ‘C’ channel of size 30 x 50mm to

form stiles and 5mm thick and 75mm wide single side prelim PVC

sheets shallbe for the top, bttom and lock rails. Paneling of 5mm Rupees Two Thousand Twenty Three

thick one side prelim sheet to be fitted in the M.S. frame and sqm

Paise Three Only

sealed to the front (Prelam side) stiles and rails (which should have

a 5mm 45 degree bent portion as beading) and attached to the

back (white/lvory) stiles and rails (which should have a 10mm

degree bent portion as beading) using 2 nos. 15mm wide x 5mm

thick PVC sheet beading inside the 9 degree bent beading. All

stiles, rails and beading to be joined to the panel using solvent

cement.An additional 5mm thick PVC strip of 20mm width is to be

struck on the interior side of the ‘C’ channel using PvC solvent

adhesive and 10mm thick (5mm x 20) thick 20mm width cross PVC

of 20mm width is to be struck on the interior side of the ‘C’ channel

using PvC solvent adhesive and 10mm thick (5mm x 20) thick

20mm width cross PVC sheet to be fitted as gap insert for top and Rupees Only

bottom rails, etc. complete as per direction of Engineer in charge,

manufacture’s specification and drawing.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

147 Providing and fixing 30mm thick FACTOR MADE FULLY GLAZED

SOLID PVC DOOR SHUTTER consisting of frame made out of M.S.

tube of 19m gauge thickness and size of 19mm x 19mm for styles

and 15mm x 15mm for top, lock and bottom rails M.S. frame shall

have a coat of steel primer of approved make and manufacture,

M.s. frame shall be covered with 5mm thick heat moulded PVC ‘C”

channel of size 75mm x 30mm x 50mm out of which 10mm shall be

bent at 90 degree towards inner side on front face of the door

forming stiles. For top rail and bottom rail, M.S. frame shall be

covered with 5mm thick, 100mm wide PVC sheet out of whch

10mm shall be bent of 90 degree towars inner side on front face of

the door. M.s. frame at lock rail shall be covered with 125 mm wide

PVC sheet out of which 10mm on both the edges shall be bent at

90 degre on front face of the door and 75mm wide PVC sheet shall Rupees Two Thousand Thirty Three

cover the M.S. frame at top, lock and bottom rail on side of door, Paise Thirteen Only

5mm thick 20mm wide cross PVC sheet as gap insert for tp and

bottom rail.PVC sheet beading of 15mm thck (5mm x 30 15mm

wide to be stuck, internally with solvent cement adhesive in stiles

and rails. Glass panel will be fitted exernally in the clear space

available between the stiles and rails and fixed between PVC sheet

of stiles and rails bent at 90 degree on front face and 15mm x

10mm ‘L’ shape outer beading nailed on stiles and rails at the back

side. So that the ‘L’ shape PVC beading can be removed when

required for replacement of broken glass etc. complete as per

direction of Engineer in charge and manufacture’s specification.

15mm thck (5mm x 30 15mm wide to be stuck, internally with

solvent cement adhesive in stiles and rails. Glass panel will be fitted

exernally in the clear space available between the stiles and rails

and fixed between PVC sheet of stiles and rails bent at 90 degree

on front face and 15mm x 10mm ‘L’ shape outer beading nailed on Rupees Only

stiles and rails at the back side. So that the ‘L’ shape PVC beading

can be removed when required for replacement of broken glass etc.

complete as per direction of Engineer in charge and manufacture’s

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

148 Providing and fixing 30mm thick factory made wire guazed solid

PVC Door shutter consisting of frame made out of M.S. tubes of

gauge thickness and size of 19mm x 19mm for stiles and 15mm x

15mm for top, lock and bottm rails, M.S. frame shall have a coat of

steel primers of approved make and manufacture, 19mm x 19mm

M.S. square tubes shall be coveed with 5mm thick head mouled

PVC ‘C’ channel of size 30mm thickness, 90mm width out of which

75mm shall be flat and 15 mm shall be bent in 90 degree angle on

either side forming stiles and 5mm thick 115mm wide PVC sheet

out of which 100mm shal be flat and 15mm shal be betn in

degree on the inner side to from top and bottom rails and 130mm

wide PVC sheet out of which 100mm shal be flat and 15mm shal be

bent in 90 degree on both side to from lock rail 10mm (5mm x 2)

Rupees One Thousand Nine hundred

thick, 20mm wide cross PVC sheet as gap insert for top rail and sqm

Eighty Seven Paise Sixty Eight Only

bottom rail, panel will be of G.I. wire gauge of 24 gauge to be

fitted in by ‘C’ channel of size 10mm x 35mm on the either side in

the stiles.The inner side ‘C’ channel is fixed by 19mm x 19mm M.S.

tube on both side with screws. The wire mesh in top, bottom and

lock rail is sealed with 15mm x 15mm tube with G.I.wire, 1mm

(5mmm x 2) thick PVC strip of 25mm width is to be stuck and

screw on both side of G.I. wire guage interior at the top, bottom

and lock rails. An additional 5mm thck PVC strip of 20mm width is

to be stuck on the interior side of the ‘C’ channel using PVC solvent

cement adhesive etc. complete as per dirction of Engineer in

charge, manufacture’s specification and drawing.

19mm x 19mm M.S. tube on both side with screws. The wire mesh

in top, bottom and lock rail is sealed with 15mm x 15mm tube with

G.I.wire, 1mm (5mmm x 2) thick PVC strip of 25mm width is to be

stuck and screw on both side of G.I. wire guage interior at the top,

bottom and lock rails. An additional 5mm thck PVC strip of 20mm Rupees Only

width is to be stuck on the interior side of the ‘C’ channel using PVC

solvent cement adhesive etc. complete as per dirction of Engineer

in charge, manufacture’s specification and drawing.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

149 Providing and fixing of fully glazed solid PVC panel PVC door along

with solid PVC door frame. 30mm thick FACTORY MADE FULLY

GLAZED SOLID PVC DOOR SHUTTER consisting of frame made out

of M.S. tube of 19 gauge thickness and size of 19mm x 19mm for

style and 15mm x 15mm for top, lock and bottom rail. M.S. frame

shall have a coat of steel primer of approved make and

manufacture. M.S. frame shall be covered with 5 mm thick heat

mouled PVC ‘C” channel of size 75mm x 30mm x 50mm out of

whch 10mm shall be bent at 90 degree towards inner side on front

face of the door. M.S. frame at lock rail shall be covered with

mm wide PVC sheet out of which 0mm on both the edges shall be

bent at 90 degree on front face of the door and 7mm wide PVC

Rupees Two Thousand One hundred

sheet shall cover the M.S. frame at top, lock and bottom rail on sqm

Fifty Two Paise Thirty One Only

back side of door, 5 mm thick 20mm wide cross PVC sheet as gap

insert for top and bottom rail. PVC sheet beading of 15mm thick

(5mm x3) 15mm wide to be stuck internally with solvent cement

adhesive in stiles and rails. Glass panel will be fittd externally in the

clear space available between the stiles and rails and fixed between

PVC sheet of stiles and rails bent at 90 degree on front face and

15mm x 10mm ‘L shape outer beading nailed on stiles and rails at

the back side. So tha the ‘L’ shape PVC beading can be removed

when required for replacement of broken glass etc. complete as per

direction of Engineer in charge and manufactuture’s specification

Glass panel will be fittd externally in the clear space available

between the stiles and rails and fixed between PVC sheet of stiles

and rails bent at 90 degree on front face and 15mm x 10mm ‘L

shape outer beading nailed on stiles and rails at the back side. So Rupees Only

tha the ‘L’ shape PVC beading can be removed when required for

replacement of broken glass etc. complete as per direction of

Engineer in charge and manufactuture’s specification

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

150 Providing and fixing complete sliding shutter solid PVC window

25mm thick factory made glazed solid PVC window shutter

consisting of frame made out of M.S. tube of 19 gauge of size 15 x

15mm for styles top, bottom rail. M.S. frame shall have a coat of

steel primer of approved make and manufacture, M.S. frame shall

be covered with 4mm thick heat mouled PVC ‘C’ channel of size

58mm x 25mm x 38 mm out of which 8mm shall be bent at

degree towards inner side on front face of the window shutter

forming stiles. For top rail and bottom rails, M>S. frame shall be

covered with 4mm thick, 58mm wide PVC sheet out of which 8mm

shall be bent at 90 degree towards inner side on front face and

Rupees Two Thousand Six hundred

38mm wide PVC sheet shall cover the M.S. frame at top and sqm

Two Paise Sixty Two Only

bottom rail on back side of window shutter, 4mm thick 15mm wide

cross PVC sheet as gap insert for top and bottom rail. PVC sheet

beading of 8mm thick (4mm x 2) to be stuck internally with solvent

cement adhesive in top and bottom rails. Glass panel will be fitted

externally in the clear space available between stiles & rails and

fixed between PVC sheet of stiles and rails bent at 90 degree on

front face 12mm x 123mm ‘L’ shape outer PVC beading nailed on

stiles and rails at the back side so that ‘L’ shape outer PVC beading

can be removed when required for replacement of broken glass etc.

complete as per direction of etc. complete as per direction of

Engineer in charge and manufactuture’s specification.

rails and fixed between PVC sheet of stiles and rails bent at

degree on front face 12mm x 123mm ‘L’ shape outer PVC beading

nailed on stiles and rails at the back side so that ‘L’ shape outer

PVC beading can be removed when required for replacement of Rupees Only

broken glass etc. complete as per direction of etc. complete as per

direction of Engineer in charge and manufactuture’s specification.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

151 Providing and fixing FRP FRAME size 125 x 65 mm and 35mm thick

FRP shutter with wood grain raised panel design finish shutter

having extra reinforcement on sides and edges and in Gel coat

finish. The core of the shutter is to be filled up with injected fire

retardant grade polyurethane foam done in situ along with Rupees Two Thousand Nineteen Paise

embedded wooden pieces for stiffening and also for taking hinges sqm

Ninety Eight Only

and fixtures. The whole FRP frame and shutter is to be water proof,

weather proof, termite proof and resistance to mld acid/Alkali,

Rates are to be inclusive of S.S. hinges with necessary screws and

alluminium fixtures and fastening.

152 Providing and fixing FRP FRAME size 100 x 50mmm and 28mm

thick FRP Degree panel shutter having extra reinforcement on sides

and edges and in Gel coat finish. The core of the shutter is to be

filled up with injectd fire retardant grade polyurethane foam done

in situ along with embedded wooden pices for stiffening and also Rupees Two Thousand Three hundred

for taking hinges and fixtures. The whole FRP frame and shutter is Seventy Seven Paise Seventy Six Only

to be water proof, weather proof, termite proof and resistance to

mild acid/Alkali, Rates are to be inclusive of S.S. hinges with

necessary screws and alluminium fixtures and fastening

153 Providing and fixing FRP FRAME size 125 x 65mm and 35mm thick

FRP shutter with wood grain raised panel design finish shutter

having extra reinforcement on sides and edges and in polish finish.

The core of the shutter is to be filled up with injected fire

extinguishing grade polyurethane foam done in situ along with Rupees Two Thousand Six hundred

embedded wooden pieces for stiffening and also for taking hinges Fifteen Paise Four Only

and fixtures. The whole FRP frame and shutter is to be water proof,

weather proof, termite proof and resistance to mild acid/Alkali.

Rates are to be inclusive of S.S. hinges with necessary scews and

brass fixtures and fastening.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

154 Providing and fixing of 28mm thick fiber glass shutter with 1.5 to

2.0 mm. thick fire exting guishing grade FRP skin in depressed

panel design having extra reinforcement on sides and edges and in

Gel coat finish. The core of the shutter is to be filled up with injectd

fire extinguishing grade polyurethane foam done in situe alongwith Rupees One Thousand Five hundred

embedded wooden pieces for stiffening and also for taking hinges Sixty Paise Thirty Three Only

and fixtures. The whole shutter is to be water proof, weather proof,

termite proof and resistance to mild acid/Alkali. Rates are to be

inclusive of SS hinges with necessary screws and alluminium

fixtures and fastening.

155 Providing and fixing Plain/Printed PVC sheet wall paneling of

thickness 5mm consisting of panels having size 1220 mm x

mm stuck on inner frame work of 50mm wide strips of 5mm thick

PVC sheet. The strips should have in their center a groove of 6mm

width and 1mm depth for sinking the head of the screw used to fix

the strips to the wall and should be placed vertically at equal Rupees Eight hundred Fifty Three Paise

intervals of 10” center to center. The PVC strips shall be fixd to the sqm

Forty Five Only

wall using 65mm long M.s. scress through the groove in the strip

by using PVC fasteners. The distance between two screws shall not

be more than 200 A groove of 2mm may be left at the joint of two

panel for aesthetic looks. The exact size of the panel and

correspondingly of the grid may vary depending on the size of the

156 Providing and fixing Prelam PVC sheet wall paneling of thickness

5mm consisting of panels having size 1220 x 2440 mm stuck on

inner frame work of 50mm wide strips of 5mm thick PVC sheet. The

strips should have in their center a grove of 6mm width asnd 1mm

depth for sinking the had of the screw using to fix the strips of the

wall and should be placed vertically at equal intervals of 10” center

to center. The PVC strips shall be fixed to the wall using 65mm long Rupees Nine hundred Fifty Three Paise

M.S. scres through the groove in the strip by using PVC fasteners. Forty Four Only

The distance between two screws shall not be more than 200 mm.

A groove of 2mm may be left at the joint of two panel for aesthetic

looks. The exact size of the panel and correspondingly of the grid

may vary depending on the size of the wall.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

157 Providing and fixing full height Prelam PVC partition system 50mm

thick consisting of 40mm sandwich PVC panel made out of 36mm

high density expanded polystyrene sheet (E.P.S. Thermocol) stuck

on both side with 2mm thick prelim PvC sheet reinforced with

frame work made from 35mm x 5mm M.S. angle. In between two

M.S. angles 4 mm with feathered edges shall be fixed on floor and

50 x 75 mm with feathered edges prelim PVC “C” channel of size

50mm x 75mm with feathered edges prelim PVC panel shall be

Rupees Two Thousand One hundred

inserted in the PVC ‘C” channel The first and last M.S. angle should sqm

be erected such that it is inside a PVC C channel of size 50 x 75mm Seventy Three Paise Fifty Two Only

In between adjoining EPS sandwiched PVC partition panel 4mm

thick x 75 mm width prelim PVC sheet feathered at edges shall be

stuck on front and back face using solvent cement etc. An

additional 4mm thick PVC strip of 40mm width is to be stuck on the

intrior side of the ‘C” channel using PVC solvent adhesive

completeas per direction of Engineer in charge. Manufacture’s

specification and drawing.

158 Providing and fixing full height Plain/colour PVC partition system

50mm thick consisting of 40mm sandwich PVC panel made out of

36mm high density expanded polystyrene sheet (E.P.S. Thermocol)

stuck on both side with 2mm thick plain PVC sheet reinforced with

frame work made from 35mm x 5mm M.S. angle. In between two

M.S. angles 4 mm thick plan heat moulded PVC ‘C’ channel of size

50mm x 100 mm with feathered edes shall be fixed on floor and

x 75 mm with feathered edges plain/printed/prelim PVC ‘C’ channel

shall be fixed in the ceiling. Sandwich PVC panel shall be inserted in

the PVC “c” channel. The first and last M.S. angle should be erected Rupees One Thousand Eight hundred

such that it is inside a PVC C channel of size 50 x 75mm. In Paise Eighty Three Only

between adjoining EPS sandwiched PVC partition panel 4mm thick

x 75mm width plain PVC sheet feathered at edges shall be stuck on

front and back face using solvent cement etc. And additional 4mm

thick PVC strip of 40mm width is to be stuck on the interior side of

the C channel using PVC solvent adhesive complete as per direction

of Engineer in charge, manufacture’s specification and drawing.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

159 Providing and fixing full height Printed PVC partition system 50mm

thick PVC partition consisting of 40mm sandwich PVC panel made

out of 36mm high density expanded polystyred shet (EPS

Thermocol) stuck on the both side with 2mm thick printed PVC

sheet reinforced with frame work made from 35mm x 5mm M.S.

angle. IN between two M.S. angles 4mm thick printed heat

moulded PVC C channel of size 50mm x 100mm with feathered,

edges shall be fixed on floor and 50 x 75 mm with feathered edges

printed PVC C channel shall be fixed in the ceiling, Sandwich PVC

panel shall be inserted in the PVC C channel. The first and last M.S. Rupees One Thousand Nine hundred

angle should be erected such that it is inside a PVC C channel of Twenty One Paise Two Only

size 50 x 75mm In between adjoining EP sandwiched PVC partition

panel 4mm thick x 75mm width printed PVC sheet feathered at

edges shall be suck on front and back face using solvent cement. If

the height of partition exceeds 8 feet; then 15mm x 30mm M.S.

tube is welded horizontally at the joint of panels in between two

vertical angels etc. An additional 4mm thick PVC strip of 40mm

width is to be stuck on the interior side of the C channel using PVC

solvent adhesive complete as per direction of Engineer in charge,

An additional 4mm thick PVC strip of 40mm width is to be stuck on

the interior side of the C channel using PVC solvent adhesive

complete as per direction of Engineer in charge, manufactures.

160 Providing and fixing PVC plain colour false ceiing with grid type with

alu frame consisting of 600 mm x 600mm 3mm thick plain PVC

sheet used as panel insert in a frame work made using anodized

alluminium T section of size 1” x 1” (25 x 25mm, 19 gauge or 1mm

thick) in square pattern of grid sizes of 2 x 2 (600 x 600mm). The

alluminium frame work is supported from the ceiling with the help Rupees Three hundred Three Paise

of G.I. hook and G.I. wire/6mm M.S. rods of required sizes to Twelve Only

maintain proper level etc. The aluminium frame work is supported

on side wall with the use of alluminium L section of size 1 x 1 (25 x

25mm) angles et. Complete as per direction of Engineer in charge.

Manufactures, specification and drawing

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

161 Providing and fixing PVC Printed pain colour false ceiling with grid

type with alluminium frame consisting of 600mm x 600mm 3mm

thick plain PVC sheet used as panel insert in a frame work made

using anodized alluminium T section of size 1 x 1 (235 x 25mm,

gauge or 1 mm thick) in square pattern of grid sizes of 2 x 2 (600 x

600mm) The alluminium frame work is supported from the cceiling Rupees Seven hundred Seventy Three

with the help of G.I. hook and G.I. wire/6mm M.S. rods of required sqm

Paise Sixty Six Only

sizes to maintain proper level etc. The aluminium frame work is

supported on side wall with the use of alluminium L section of size

1 x 1 (25 x 25mm) angles etc. complete as per direction of

Engineer in charge. Manufactures specification and drawing.

162 Providing and fixing PVC plain colour false ceiling with flush type

with alluminium frame, frame work is done with three different

sections of G.I. sheet of 24 gauge thickness named as C, U and L.

The C section is fixed with hangers at an equal distance of 36” each

and then U section is fixed perpendicular on C section with steel

screws at an equal distance of 16” each. The complete frame work

is supported by G.I. L angle 6mm rod hangers from the roof and L

sections is fixed all around the wall as shown in the diagram. 5mm Rupees Three hundred Fifty Two Paise

PVC sheet strips of size 2 wide and fixed with counter sunk steel Fifty Six Only

screw on the U section. Further 3mm PVC sheet is stuck to these

PVC strips with solvent cement such that joining lines are perfectly

matched. P.U. putty is filled, ceiling for getting fine surface finish

etc. complete as per direction of Engineer in charge, manufacturer’s

specification and drawing.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

163 Providing and fixing PVC printed false ceiling with flush type with

alluminium frame, frame work is done with three different sections

of G.I. sheet of 24 gauge thickness named as C, U and L. The C

section is fixed with hangers at an equal distance of 36” each and

then U section is fixed perpendicular on C section with steel screws

at and equal distance of 16” each. The complete frame work is

supported by G.I. L angle/6 mm rod hangers from the roof and L

Rupees Nine hundred Eleven Paise Two

sections is fixed all around the wall as shown in the diagram. 5mm sqm

PVC sheet strips of size 2 wide are fixd with counter sunk steel

screws on the U section. Further 3mm PVC sheet is stuck to these

PVC strips with solvent cement such that joining lines are perfectly

matched. P.U. putty is filled, dried and leveled and requisite coats

of primer and paint is done on the ceiling for getting fine surface

finish etc. complete as per direction of Engineering and charge

manufacturer’s specification and drawing

164 Steel work riveted, in built up sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat of

red lead paint (A) In beams and joists, channels, angles, tees, flats Rupees Five Thousand Eight hundred

with connecting plates or angle cleats as in main & cross Eighteen Paise Sixty Five Only

beamnship & jack rafters, purlins connected to common rafters and

165 (B) In trusses and trussed purlins, up to 25 mt. span & 15 mt. Rupees Six Thousand Five hundred

overall height. Ninety Five Paise Sixteen Only

166 Steel work welded, in built up sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat of

red lead paint (A) In beams and joists, channels, angles, tees, flats Rupees Eight Thousand Four hundred

with connecting plates or angle cleats as in main & cross Thirteen Paise Forty Eight Only

beamnship & jack rafters, purlins connected to common rafters and

167 (B) In trusses and trussed purlins, up to 25 mt. span & 15 mt.

Rupees Eight Thousand Four hundred

overall height. Quintal

Seventy Paise Seventy Five Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

168 Providing and fixing in position collapsible steel shutters with

vertival channels 20 mm x 10 mm x 2 mm braced with flat iron

diagonals 20 mm x 5 mm size with top & bottom rails of T iron 40 Rupees Five Thousand Four hundred

mm x 40 mm x 6 mm with 38 mm diameter steel pulleys complete sqm

Forty Five Paise Fourteen Only

with bolts, nuts, locking arrangements, stopper handles including

applying a priming coat of red lead paint.

169 Providing and fixing 1 mm thick M.S sheet sliding shutters with

frame and diagonal braces of 40 mm x 40 mm x 6 mm angle iron,

3.15 mm M.S gusset plate at junctions and corners, 25 mm Rupees Three Thousand Six hundred

diameter pulley, 40 mm x 40 mm x 6 mm angle and T iron guide sqm

Eighty Eight Paise Sixty Four Only

rail at top and bottom respectively with handles, stoppers and

locking arrangements etc. including applying a priming coat of red

170 Providing & fixing rolling shutters of approved make made of

mm. Wide M.S. laths inter locked together theit entire length and

jointed together at the end locks mounted on specially designed Rupees Three Thousand Five hundred

pipe shaft with bracket plates, guide channels and out side locking sqm

Three Paise Forty One Only

with push-pull operation excluding the cost of Hood cover and

spring etc. comp. (A) Shutters having width below 3.5 mt.

171 (B) Shutters having width 3.5 mt. and above. Rupees Four Thousand Four hundred

Ninety Five Paise Two Only

172 Providing and fixing 27.5 cm long wire spring grade No 2 of Rupees Six hundred Thirty Seven Paise

approved make for rolling shutters. Twenty Two Only

173 Providing and fixing hood cover for rolling shutters (A) Shutters Rupees One hundred Twenty One Paise

having width below 3.5 meters. Twenty Three Only

174 Providing and fixing hood cover for rolling shutters (B) Shutters Rupees One hundred Twenty Six Paise

having width 3.5 meters and above. Seventy Two Only

175 Fixing standard steel doors, windows & ventilators in walls with

x 3.15 mm logs 10 Cm. long embeded in cement concrete block

Rupees Two hundred Thirty Eight Paise

x 10 x 10 of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone sqm

aggregate of 20 mm size) cost for supply of door / window /

ventilators shall be paid separately.

176 Providing and fixing M.S fan clamps type I of 16 mm diameter M.S

bar bent to shape with hooked ends to R.C.C slabs during laying Rupees One hundred Twenty Five Paise

including painting the exposed portion of loops, all as per standard Ninety Nine Only

design complete.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

177 Extra over rate of item 11.20 for providing and fixing M.S fan

clamps type II as per standard design in R.C.C beams during laying

Cm Height Rupees One Paise Forty Four Only

towards additional height of the clamps due to beam rib.

178 Providing and fixing M.S round holding down or anchor bolts with Rupees Fifty Four Paise Seventy One

nuts and washer plates complete. Only

179 Providing and fixing EZ-7 section door/window/frame including

Rupees Seven hundred Twenty Eight

welding and fixtures fastenings including three coats of approved sqm

Paise Fifty Six Only

enamel oil paint etc. complete.

180 Providing and fixing rough cast wired glass 6 mm thick bedded in

putty and fixed with wooden beading including the cost of wooden Rupees Five hundred Sixty Four Paise

beadings of Indian teak wood and necessary cutting of glass. [C] Eighty Five Only

Wired-figure glass.

181 Providing and fixing sheet glass ordinary quality bedded in putty

and fixed with wooden beading including the cost of wooden Rupees One Thousand Ninety One

beadings of first class teak wood and necessary cutting of glass. [3] Paise Twenty Five Only

182 [4] 4 mm. thick.

Rupees One Thousand One hundred

Eleven Paise Ninety Four Only

183 Extra for using ground glass (Frosted or obscured on one side) Rupees Thirty Eight Paise Twenty Nine

instead of plain glass. Only

184 Deduct for difference in cost of material and labour involved in

Rupees Four hundred Fifty Six Paise

method of glazing if changed in item No 13.1 to (A) Front and back sqm

Fifty Five Only

puttied and sprigged or fixed with glazing pins.

185 Grinding, polishing and rounding of edges of glass or glazing sheets.

m Rupees Twenty Paise Eighty Eight Only

186 Providing and fixing precast concrete kerb stone of gray cement

based concrete block 30 cm length , 30 cm height and 15 cm thick

of M 250 grade concrete as per approved design and including Rupees Three hundred Sixty One Paise

excavation for fixing in proper line and level, filling the joint with Sixty Four Only

CM : 1:3 ( 1 cement : 3 fine sand) etc

187 Providing and fixing precast Rubber Dye inter locking conceret

block 60mm thick with grade of concrete M 300 pnumatic

Rupees Six hundred Eighty Six Paise

compressed by mechanically pressed and as per approved design sqm

including 75 mm sand layer for levelling and filling the joint with

sand in proper line and level etc

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

188 Providing and laying white glazed tiles 6 mm. thick in flooring,

treads of steps & landing on a bed of 12 mm. thick cement mortar Rupees Nine hundred Seventeen Paise

1:3 (1 cement : 3 coarse sand) finished with flush pointing in white Twenty Five Only

189 Providing and laying white glazed tiles 6 mm. thick in skirting, risers

of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : Rupees One Thousand Fifty Four Paise

3 coarse sand) & jointed with white cement slurry. Sixty Seven Only

190 Providing and layingCeramic tiles 6mm thick in skrting risers of

steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3- Rupees One Thousand Thirty Eight

coarse sand) and jointed with white cement slurry Paise Thirty Nine Only

191 Providing and laying Ceramic tiles 6mm thick in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar 1:3 Rupees Nine hundred Seventy Paise

(1-cement : 3- coarse sand ) finishing with flush pointing in white Seven Only

192 Providing and fixing 50 mm intrnal or external angles of glazed tiles.

sqm Rupees Sixty Six Paise Seven Only

193 Providing and laying marble stone slab flooring over 20 mm

(average) base of cement mortar 1:6 (1 cement : 6 coarse sand) or

Rupees Two Thousand Two hundred

L.M 1:1.5 laid and jointed with grey cement slurry including rubbing sqm

Sixteen Paise Fifty Eight Only

and polishing complete (A) Marble slab 25 mm thick.

194 Providing and laying polished kota stone slab flooring over

mm.(average) thick base of cement mortar 1:6 (1 cement :

Rupees Nine hundred Ninety Two Paise

coarse sand) or L.M. 1:1.5 laid over and jointed with gray cement sqm

slurry including rubbing & polishing etc. complete. [A] 25 mm.

195 [B] 30 mm. thick. Rupees One Thousand Ninety Six Paise

Thirty Three Only

196 Providing and laying polished kota stone slab 25 mm thick in risers

of steps, dedo and pllars laid on 10 mm thick cement mortar 1:3 (1

Rupees One Thousand One hundred

cement : 3 coarse sand) and jointed with gray cement slurry sqm

Eighty Seven Paise Seventy Nine Only

including rubbing & polishing etc. complete.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

197 Providing & laying rough chiseled dressed stone flooring over

mm.(average) thick base of cement mortar 1:5(1 cement : 5 coarse

Rupees Five hundred Forty Nine Paise

sand) or L.M. 1:1.5 including pointing with cement mortar 1:2 (1 sqm

Forty Seven Only

cement:2 stone dust) etc. complete. [A] 25 mm. thick.

198 Providing & laying cement concrete flooring 1:2:4 (1 cement :

coarse sand : 4 stone aggregate 20 mm. nominal size) laid in one Rupees Three hundred Paise Sixty Six

layer finished with a floating coat of neat cement. [A] 40 mm. thick. Only

199 [B] 50 mm. thick. Rupees Three hundred Fifty One Paise

200 Providing & laying cement concrete pavement (25 mm to 50 mm

thick) with 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 20 Rupees Four Thousand Four hundred

mm. nominal size) including finishing with a floating coat of neat Thirty Seven Paise Fifty Seven Only

201 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in

skrting risers of steps and dedo on 10mm thick cement plaster 1:3 Rupees One Thousand One hundred

(1-cement : 3- coarse sand) and jointed with white cement slurry Forty One Paise Forty Five Only

202 Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3 (1- Rupees One Thousand Five hundred

cement : 3-coarse sand) and jointed with white cement slurry Thirty Eight Paise Eighty Five Only

203 Providing corrugated G.I sheets with iron J or L hooks, bolts & nuts

8 mm. diameter with bitumen & G.I.limpet ashers.Filled with white Rupees Seven hundred Twenty Seven

lead complete excluding the cost of purlins, rafters and trusses. (I) Paise Thirteen Only

0.80 mm. thick sheet.

204 Providing ridges or hips 600 mm overall in plain G.I sheet fixed with

G.I J or L hooks, bolts and nuts 8 mm diameter, G.I limpet and Rupees Six hundred Forty One Paise

bitumen washer complete. (I) 0.80 mm thick sheet. Ninety Four Only

205 Providing valley 900 mm overall in plain 1.6 mm thick G.I sheet

Rupees One Thousand Fifty Three Paise

fixed with G.I J or L hooks, bilts and nuts 8 mm diameter G.I impet m

Twenty One Only

and bitumen washers complete.

206 Providing & fixing on wall face C.I rain water pipe including filling

the joints with spun yarn soaked in neat cement slurry and cement Rupees Two hundred Eighty Six Paise

mortar 1:2(1 cement : 2 fine sand) (A) 75 mm diameter. Forty Six Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

207 Providing and fixing M.S holder bat clamps of approved design to

C.I or S.C.I pipes embedded in and including cement concrete

blocks 10 mm x 100 mm x 100 mm size of 1:2:4 (1 cement : 2 Rupees One hundred Fifteen Paise Two

coarse sand : 4 graded stone aggregate 20 mm nominal size) & Only

cost of cutting holes and making good the wall etc. complete (A)

208 Providing, fixing & embedding sand, C.I rain water pipes in the

masinry surrounded with 12 mm thick cement mortar of the same Rupees Two hundred Ninety One Paise

mix as that of masonry. (A) 75 mm diameter pipe. Eleven Only

209 Providing and fixing for wall plugs and standard hold bat clamps

comprising of two semicircular halves of flat iron and cast iron base

Each Rupees Sixty Six Paise Thirty Five Only

screwed on wooden plugs. (B) 80 mm diameter.

210 (C) 100 mm diameter. Rupees Seventy Five Paise Seventy

211 Providing and fixing wooden planks ceiling with tounged & grooved

jointing and wood screws (frame work and cover fillets to be Rupees One Thousand Twenty Three

measured and paid separately) (A) Indian teak wood. (I) 12 mm Paise Fifty Five Only

212 (A) Indian teak wood. (II) 20 mm thick.

Rupees One Thousand Five hundred

Three Paise Eighty Nine Only

213 Providing and fixing wooden planks ceiling with tounged & grooved

jointing and wood screws (frame work and cover fillets to be Rupees One Thousand Eight hundred

measured and paid separately) (A) Indian teak wood. (III) 25 mm Ten Paise Sixty One Only

214 Deduct for butt jointing in place of touged and grooved type joint

sqm Rupees Thirty Eight Paise Three Only

215 Providing and fixing fibre insulation board lining with butt jointing

Rupees Two hundred Sixty Nine Paise

and nails (frame work and cover fillets to be measured and paid sqm

separately) (I) 12 mm thick.

216 (II) 18 mm thick. Rupees Three hundred Fifty Seven Paise

217 (III) 25 mm thick. Rupees Four hundred Thirty Eight Paise

Thirty Seven Only

218 Providing and fixing plywood lining with butt jointing and nails

Rupees Two hundred Ninety Nine Paise

(frame work and cover fillets to be measured and paid separately) sqm

Seventy Four Only

(I) 6 mm thick ply.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

219 (II) 9 mm thick ply. Rupees Four hundred Three Paise Seven

220 Providing 10 mm. thick cement plaster in single coat on

brick/concrete wall for interior plastering upto floor two level Rupees One hundred Twenty Eight

finished even and smooth in [I] Cement mortar 1:3 (1 cement : 3 Paise Eighty Six Only

221 Providing 10 mm. thick cement plaster in single coat on

brick/concrete wall for interior plastering upto floor two level Rupees One hundred Fifteen Paise

finished even and smooth in[II] Cement mortar 1:4 (1 cement : 4 Eighty One Only

222 Providing 10 mm. thick cement plaster in single coat on

brick/concrete wall for interior plastering upto floor two level Rupees One hundred Three Paise Forty

finished even and smooth in[III] Cement mortar 1:6 (1 cement : 6 Only

223 Providing 15 mm. thick cement plaster in single coat on fair side of

brick wall for interior plastering upto floor two level finished even Rupees One hundred Seventy Six Paise

and smooth in [I] Cement mortar 1:3 (1 cement : 3 fine sand) Fifty Eight Only

224 Providing 15 mm. thick cement plaster in single coat on fair side of

brick wall for interior plastering upto floor two level finished even Rupees One hundred Fifty Seven Paise

and smooth in [II] Cement mortar 1:4 (1 cement : 4 fine sand) Seventeen Only

225 Providing 15 mm. thick cement plaster in single coat on fair side of

brick wall for interior plastering upto floor two level finished even Rupees One hundred Thirty Eight Paise

and smooth in [III] Cement mortar 1:6 (1 cement : 6 fine sand) Seventy One Only

226 Providing 20 mm. thick cement plaster in single coat on single or

half brick wall for interior plastering upto floor two level finished Rupees Two hundred Seventeen Paise

even and smooth in [I] Cement mortar 1:3 (1 cement : 3 fine sand) Ninety Four Only

227 Providing 20 mm. thick cement plaster in single coat on single or

half brick wall for interior plastering upto floor two level finished Rupees One hundred Twenty Nine Paise

even and smooth in [II] Cement mortar 1:4 (1 cement : 4 fine Thirty Eight Only

228 Providing 20 mm. thick cement plaster in single coat on single or

half brick wall for interior plastering upto floor two level finished Rupees One hundred Twelve Paise Forty

even and smooth in [III] Cement mortar 1:6 (1 cement : 6 fine One Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

229 Extra over items 17.58 to 17.64 for finishing with a floating coat of Rupees Forty Eight Paise Twenty One

neat cement slurry. Only

230 (A) Extra over items 17.58 to 17.67 for providing and mixing water

proofing material in cement mortar in proportion recommended by

of 50Kg Rupees Forty Nine Paise Twenty Six

the manufactures.

231 Extra over items No 17.58 to 17.71 for plastering on ceilings anf

Rupees Twenty Four Paise Eighty Two

soffits of stairs upto floor two level instead of plstering on walls. sqm

232 Extra over items 1 to 69, 71 to 87 and 90 for interior plastering

sqm x No Rupees Twenty Three Paise Thirty

above floor two level for every additional storey height. (1) Single of storey

233 (2) Two coat plaster. sqm x No Rupees Twenty Six Paise Seventy Two

234 (3) Floating coat of neat cement. sqm x No

Rupees Four Paise Seventy Five Only

235 Extra over items 91 for plastering on ceiling and soffits of stairs Rupees Twenty One Paise Thirty Two

above floor two level for every additional storey height. Only

236 20 mm. thick sand face cement plaster on walls upto 10 meters

above ground level consisting of 12 mm. thick backing coat of C.M.

Rupees Three hundred Paise Sixty Six

1:3 (1 cement : 3 sand) and 8 mm. thick finishing coat of C.M. 1:1 sqm

(1 cement : 1 sand) etc. complete.

237 Pointing on brick work with cement mortar 1:3 (1 cement :

sqm Rupees Ninety Two Paise Eleven Only

coarse sand) (A) Flush pointing.

238 (B) Ruled pointing. Rupees Sixty Five Paise Thirty Two

239 Pointing on brick work with cement mortar 1:4 (1 cement : 4 Rupees Eighty Nine Paise Twenty Five

coarse sand) (A) Flush pointing. Only

240 (B) Ruled pointing.

sqm Rupees Ninety Two Paise Eleven Only

241 Providing cement vata (10 cm x 10 cm size) quarter round in

Rupees Twenty Three Paise Sixty Eight

cement mortar 1:1 including neat cement finishing, watering etc. sqm

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

242 White washing with lime on wall surfaces (two coats) to give an

even shade including thoroughly brooming the surface to remove sqm Rupees Twelve Paise Forty One Only

all dirt, dust, mortar drops & other foreign matter.

243 White washing with lime on wall surfaces (one coats) to give an

even shade including thoroughly brooming the surface to remove sqm Rupees Five Paise Seventy Three Only

all dirt, dust, mortar drops & other foreign matter.

244 Extra over items 11 and 12 for every subsequent coat of white

sqm Rupees Five Paise Seventy Three Only

washing with lime on wall surfaces.

245 Extra over items 11 for white washing with lime on ceiling and/or

sqm Rupees One Paise Twelve Only

slopping roofs.

246 Extra over items 12 for white washing with lime on ceiling and

sqm Rupees Paise Forty Eight Only

slopping roofs.

247 Extra over items 13 for for every subsequent coat of white washing

sqm Rupees Paise Forty Eight Only

with lime on ceiling and/or slopping roofs.

248 Colour washing with lime on wall surfaces (two coat) to give an

even shade including thoroughly brooming the surface to remove

sqm Rupees Twelve Paise Forty One Only

all dirt, dust, mortar drops & loose scales of lime wash and other

foreign matter.

249 Colour washing with lime on wall surfaces (one coat) to give an

even shade including thoroughly brooming the surface to remove

sqm Rupees Seven Paise Ninety Six Only

all dirt, dust, mortar drops & loose scales of lime wash and other

foreign matter.

250 Extra over item 17 & 18 for every subsequent coat of colour wash

sqm Rupees Seven Paise Ninety Six Only

with lime on wall surfaces.

251 Extra over item 17 for colour washing on ceiling and/or slopping

sqm Rupees Two Paise Twenty Three Only

252 Extra over item 18.19 for colour washing on ceiling and slopping

sqm Rupees Two Paise Eight Only

253 Cement washing portland cement slurry on wall surfaces (one coat)

to give an even shade including thoroughly brooming the surface to

sqm Rupees Eleven Paise Seventy Eight Only

remove all dirt, dust, mortar drops & loose scales of lime wash and

other foreign matter.

254 Extra over item no 29 for every subsequent coat of cement washing

sqm Rupees Eleven Paise Seventy Eight Only

with portlane cement slurry.

255 Removing dry or oil bound distemper by ashing and scrapping and

sand papering the wall surface smooth including necessary repairs sqm Rupees Eleven Paise Thirty Only

to scratches complete.

256 Extra over item 33 for removing dry oil bound distemper on ceiling

sqm Rupees One Paise Sixty Only

and slopping roof.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

257 Distempering with dry distemper of approved brand &

manufacture (two coats) and of required shade on wall surfaces to

Rupees Forty Seven Paise Forty One

give an even shade over & including priming coat of whiting after sqm

thoroughly brooming the surface free from mortar dropping & other

foreign matter.

258 Distempering with dry distemper of approved brand &

manufacture (one coat) and of required shade on wall surfaces to

give an even shade over & including priming coat of whiting after

sqm Rupees Fifteen Paise Twelve Only

thoroughly brushing the surface clean of all grease, dirt, loose

pieces of scales including papering the surface even and sand

papered smooth.

259 Extra over items of 38 & 39 for every subsequent coat of

distempering with dry distemper of approved brand and sqm Rupees Fourteen Paise Forty Eight Only

260 Extra over items of 38 for every subsequent coat of distempering

sqm Rupees Six Paise Fifty Three Only

with dry distemper on ceiling and sloping roofs.

261 Extra over items of 39, 40 for distempering with dry distemper on

sqm Rupees One Paise Sixty Only

ceiling and sloping roofs.

262 Distempering (two coats) with oil bound distemper of approved

brand & manufacture and of required shade on wall surfaces to

give an even shade over & including priming coat with distemper Rupees Seventy Six Paise Eighty Four

primer of approved brand after thoroughly brushing the surface sqm

free from mortar dropping & other foreign matter and also

preparing the surface even and smooth..

263 Distempering (two coats) with oil bound washable distemper of

approved brand & manufacture and of required shade on wall

surfaces to give an even shade over & including priming coat with Rupees Seventy Six Paise Eighty Four

alkali resistance primer of approved brand after thoroughly sqm

brushing the surface free from mortar dropping & other foreign

matter and also preparing the surface even and smooth..

264 Distempering (one coat) with oil bound washable distemper of

approved brand & manufacture and of required shade on wall

surfaces to give an even shade after thoroughly brushing the

sqm Rupees Thirty Paise Thirty Nine Only

surface clean of all grease, dirt, loose pieces of scales & also

including distempering with oil bound washable distemper of

preparing the surface even and smooth.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

265 Extra over items 44 to 46 for every subsequent coat of approved

sqm Rupees Thirty Paise Thirty Nine Only

brand and manufacture.

266 Extra over items 44, 45 for distempering with oil bound washable

sqm Rupees Eight Paise Twelve Only

distemper on ceiling and sloping of roofs.

267 Extra over items 46, 47 for every subsequent coat of distempering

sqm Rupees Three Paise Eighteen Only

on ceiling and sloping of roofs.

268 Finishing wall with water proofing cement paint on wall surfaces

(two coats) to give an approved brand and manufacturer &

Rupees Fifty Seven Paise Forty Four

required shape even shade after thoroughly brushing the surface to sqm

remove all dirt & remains of loose powdered materials.

269 Extra over item 51 for every subsequent coat of water proofing

sqm Rupees Thirty Two Paise Fourteen Only

cement paint of approved brand and manufacture

270 Extra over item 51 for finishing with cement paint on ceiling and

sqm Rupees Six Paise Fifty Three Only

271 Extra over item 53 for every subsequent coat of finishing with

sqm Rupees Three Paise Eighteen Only

cement paint on ceilings and sloping roofs.

272 Wall painting (two coats) with plastic emulsion paint of approved

brand & manufacture on under coated wall surface to give an even

Rupees Seventy Nine Paise Twenty

shade including thoroughly brushing the surface free from mortar sqm

droppings and other foreign matter and sand papered smooth.

273 Extra for item 57 for every subsequent coat of wall painting with

Rupees Thirty Three Paise Seventy

plastic emulsion paint of approved brand and manufacture. sqm

274 Extra for item 57 for painting with plastic emulsion paint of

approved brand and manufacture on ceilings and sloping roofs. sqm Rupees Five Paise Forty One Only

275 Extra for item 59 for every susequent coat of painting with plastic

sqm Rupees Two Paise Twenty Three Only

emulsion paint on ceilings and sloping roofs.

276 Applying priming coat over new steel and other metal surfaces after

and including preparing the surface by throughly cleaning oil,

Rupees Thirty Four Paise Sixty Eight

grease dirt and other foreign matter & scoured with brushes fine sqm

steel, wood, scrapers and sand papers with ready mixed priming

paint brushing red lead.

277 Painting two coats (excluding priming coat) over new steel and

other metal surfaces with enamel paint, brushing, interior to give Rupees Eighty Seven Paise Eighty One

an even shade including cleaning the surface of all dirt, dust and Only

other foreign matter.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

278 Painting one coats (excluding priming coat) on previously painted

steel and other metal surfaces with enamel paint, brushing, interior Rupees Fifty Four Paise Eighty Nine

to give an even shade including cleaning the surface of all dirt, dust Only

and other foreign matter.

279 Extra over item 7 and 11 for every subsequent coat of paint.

sqm Rupees Fifty Paise Ninety Only

280 Painting two coats (excluding priming coat) over new steel and

other metal surfaces with synthetic enamel paint, brushing, interior

sqm Rupees Sixty Five Paise Thirty One Only

to give an even shade including cleaning the surface of all dirt, dust

and other foreign matter.

281 Painting one coats (excluding priming coat) on previously painted

steel and other metal surfaces with synthetic enamel paint,

Rupees Forty Four Paise Twenty Three

brushing, interior to give an even shade including cleaning the sqm

surface of all dirt, dust and other foreign matter.

282 Extra over item 19 and 21 for every subsequent coat of paint.

sqm Rupees Forty Three Paise Ninety Only

283 Painting one coats (excluding priming coat) on external surfaces of

new rain water, soil, waste and vent pipes and fittings with ready

mixed bituminous paint, brushing black anti corrosive to give an

m Rupees Twenty Paise Thirty Six Only

even shade including cleaning the surface of all dirt, dust and other

foreign matter. (B) 75 mm diameter.

284 (C) 100 mm diameter.

m Rupees Twenty Five Paise Thirty Only

285 Applying priming coat over new wood and wood based surfaces

after including preparing the surface by throughly cleaning oil,

grease, dirt and other foreign matter, sand papering & knotting (B) sqm Rupees Forty Paise Fifty Seven Only

ready mixed paint, brushing wood primer pink.

286 (D) ready mixed paint, brushing priming for enamel. sqm Rupees Forty Paise Fifty Four Only

287 Extra over item 59 for every subsequent coat of priming coat (B) Rupees Thirty Six Paise Seventy Five

ready mixed paint, brushing wood primer pink. Only

288 (D) ready mixed paint, brushing priming for enamel. Rupees Thirty Six Paise Seventy Five

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

289 Painting two coats (excluding priming coat) over new wood and

wood based surfaces with enamel paint, interior to give even shade Rupees Eighty Seven Paise Ninety

including cleaning oil, grease, dirt and other foreign matter, sand Eight Only

papering & stopping.

290 Painting one coat (excluding priming coat) on previously painted

new wood and wood based surfaces with enamel paint, interior to

sqm Rupees Fifty Five Paise Sixty Eight Only

give even shade including cleaning oil, grease, dirt and other

foreign matter.

291 Extra over items 71 & 73 for every subsequent coat of paint.

sqm Rupees Fifty Two Paise Thirty Five Only

292 Painting two coats (excluding priming coat) over new wood and

wood based surfaces with ready mixed paint, interior to give even Rupees One hundred Five Paise Sixteen

shade including cleaning oil, grease, dirt and other foreign matter, Only

sand papering & stopping.

293 Polishing with french polish over new wood and wood based

surfaces to give even surface including cleaning oil, grease, dirt and Rupees One hundred Thirty Two Paise

sand papered smooth and including a coat of wood filler. Ninety Nine Only

294 Polishing with French polish on previously polished wood and wood

based surface to give an even surface including cleaning the Rupees Sixty Eight Paise Forty One

surface to remove all dirt, dust and sand papered smooth including Only

a coat of wood filler.

295 Writing letter or figures on any surface with black Japan paint

(stop, comas, hyphens and the like not to be measured andper letter per Cm height

paid Rupees Three Paise Eighteen Only

for separately) (I) Block (letters/figure)

296 (II) Indian (letters/figure) per letter per Cm height

Rupees Three Paise Fifty Only

297 Extra over item 19.119 for using thick white paint instead black

per letter per Cm height Rupees Paise Seven Only

japan paint. (I) Block (letters/figure)

298 (II) Indian (letters/figure) per letter per Cm height Rupees Paise Seven Only

299 Painting lines, dashes, arrows, letters etc on road, air fields and like

in two coats with road marking paint, brushing including cleaning Rupees One hundred Twenty Three

the surface of all dirt, dust and other foreign matter. (I) Over 10 Paise Thirteen Only

300 (II) Upto 10 Cm in width.

m Rupees Twelve Paise Twenty Six Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

301 Painting lines, dashes, arrows, letters etc on road, air fields and like

in one coat with road marking paint, brushing including cleaning

sqm Rupees Fifty Paise Ninety Only

the surface of all dirt, dust and other foreign matter. (I) Over

302 (II) Upto 10 Cm in width. m Rupees Five Paise Fifty Eight Only

303 Demolition & disposal of unserviceable materials with all lead and Rupees Five hundred Twenty Nine Paise

lift. (I) Lime concrete. Seventy Two Only

304 (II) Unreinforcement cement concrete. Rupees Six hundred Nine Paise Twenty

305 Demolition including stacking of serviceable materials and disposal

Rupees One Thousand Fifty Seven

of unserviceable materials with all lead and lift. (I) R.C.C work. cum

Paise Eighty Five Only

306 Demolition of brick work & stone masonry including stacking of

Rupees Three hundred Sixty Five Paise

serviceable materials and disposal of unserviceable materials with cum

Eighty Seven Only

all lead and lift. (II) In lime mortar.

307 (III) In cement mortar. Rupees Five hundred Fifty Paise Forty

308 Demolition of terrace including stacking of serviceable materials

Rupees Sixty Three Paise Sixty Three

and disposal of unserviceable materials with all lead and lift. (I) sqm

Brick tile covering.

309 Dismantaling tiled or stone floors laid in mortar including stacking

Rupees Forty Seven Paise Seventy

of serviceable materials and disposal of unserviceable materials sqm

with all lead and lift.

310 Dismantaling of wooden floors laid in mortar including stacking of

Rupees Seventy One Paise Fifty Nine

serviceable materials and disposal of unserviceable materials with sqm

all lead and lift.

311 Dismantaling of sheet roofing including ridges, hips, valleys, gutters

etc. stacking of serviceable materials and disposal of unserviceable Rupees Forty Seven Paise Seventy

materials with all lead and lift. (I) G.I sheet roofing Two Only

312 Dismantaling wood work, wrought framed and fixed in frame

Rupees One Thousand Seven hundred

trusses including stacking of serviceable materials with all lead and cum

Fifty Nine Paise Thirty Seven Only

313 Dismantaling expanded metal or IRC fabric with necessary battens

and beading including frame work and stacking of serviceable Sqm Rupees Fifty Five Paise Sixty Eight Only

materials with all lead and lift.

314 Dismantaling steel work including dismembering and stacking the

Kg Rupees Three Paise Sixty Seven Only

materials with all lead and lift.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

315 Dismantaling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats, architraves, holdfasts and other

Rupees One hundred Eighty Seven Paise

attachment etc. complete and stacking the materials with all lead Each

Seventy One Only

and lift. (I) Not exceeding 3 Smt in area.

316 (II) Exceeding 3 Smt in area. Rupees Two hundred Fifty One Paise

Thirty Four Only

317 Dismantaling barbed wire in fencing including making rolls and also

including dismantaling fencing posts including all earth work

concrete in base and making good the disturbed ground stacking m Rupees Sixty Six Paise Eighty One Only

useful materials as directed & disposing off the unserviceable

materials with all lead and lift.

318 Dismantaling C.I pipes, G.S.W pipes and A.C rain water pipes with

Rupees Seventy Four Paise Seventy

fittings and clamps including stacking the materials with all lead m

and lift (For any diameter of pipe)

319 Dismantling sanitary fittings like wash basin, W.C pan Indian and

Rupees Four hundred Five Paise Sixty

European type, flushing tank etc including stacking the materials Each

with all lead and lift.

320 Scraping oil paint from steel and other metal surface and making Rupees Forty Nine Paise Thirty Two

the surface even (with hand scraping) Only

321 Providing and fixing M.S fan clamps of shape and size as specified

Rupees One hundred Seventy Paise

in existing R.C.C slab including cutting chase and making good. Each

Twenty Two Only

322 Cutting out cracks of roof terrace to V-section, cleaning out,

Rupees Sixty Five Paise Twenty Three

wetting, grouting with cement and sand slurry 1:3 (1 cement : 3 m

323 Cutting out cracks of roof terrace to V-section, cleaning out and

filling solidly with a hot mixture of bitumen and clean dry sand (1:1 m Rupees Seventy Six Paise Four Only

324 Providing and fixing 1.20 meter high fencing with 2.0 meter long

M.S angle posts 40 mm x 40 mm x 6 mm and oil painting three

coats, fixed at 2.50 meter C/C with five horizontal lines and two

Rupees Three hundred Eighty Nine

diagonals of galvanised stell barbed wire weighing 9.38 Kg / 100 m

Paise Twenty Five Only

Rmt, strained and fixed to posts with G.I staples, including fixing

the posts in ground with 0.50 meter x 0.50 meter x 0.50 meter

block in C.C 1:5:10 etc complete.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

325 Constructing a sink (Chowkdi) with C.C 1:2:4, 12 cm thick over B.B

masonry in cement mortar 1:6 in front and dwarf wall 1.0 meter

high and 23 cm thick, cement plster to masonry in cement mortar Rupees Two Thousand Two hundred

1:3 and cement concrete flooring in 1:2:4 with 5 cm diameter A.C Fifty Eight Paise Two Only

drain pipe etc. complete.

326 Constructing a cooking platforms 60 cm width and 70 cm height

resting on B.B masonry walls 23 cm thick (I) Fixing of precast R.C.C

Rupees Nine hundred Forty Three Paise

8 cm thick slab with marble mosaic chips set in cement mortar m

Thirty Two Only

(Terrazo) with plastering on exposed faces of wall in cement mortar

1:4 etc. complete.

327 Carrying out timber treatment to all wood work including drilling

holes and spraying oil based chemical solution on surface of timber

work for termite control including labor and material etc.

complete. Using Chlorpyriphos20 EC as per 6313 2013 Part III

(1% concentration by mass) is recommended one litre chemical

emulsion diluted with 19 liters of kerosene. Total diluted sqm Rupees Fifty Five Paise Fifty Three Only

concentration will be 20 liters inclusive of 1 liter chemical emulsion

application in drilled holes and 0.75 / Litre chemical per one Sqmt

two coat on wood surface not protected by paint or varnish.

328 Applying general insecticide pest control treatment to floors,

cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration Rupees Eighty Nine Paise Twenty Eight

by mass) is recommended 10.5ml chemical diluted with 5 liters of Only

water application 0.5 litre chemical /Sqm of surface is

recommended as per I.S.

329 Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

Rupees One hundred Five Paise Ninety

6131_paret-II Consentration Weight one percent is recommended sqm

i.e one litre 20 EC chemical emulsion with 19 liter give 1 %

concrentration inclusive of one litre chemical emulsion appication at

the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

330 Carrying out wall treatment for termite control including spraying

with chemical solution in oil base including labour and material

Using Chlorpyriphos 20 ECAs per IS 6313 part - II (1%

concentration by mass) is recommended i.e one litre chemical Rupees Thirty Seven Paise Seventy

emulsion diluted with 19 liter oil base. Total solution will be 20 One Only

liters inclusive of one liter chemical emulsion application at the rate

of 7.5 litre chemical / Sqm of surface is recommended as per I.S.

331 Providing and fixing to wall, ceiling & floor galvanised mild steel

tubes (Medium grade) of the following nominal bore, tube fittings Rupees Two hundred Forty Six Paise

and clamps including making good the wall, ceiling and floor. [A] Fifty Seven Only

332 [B] 20 mm. Rupees Three hundred Paise Twenty

333 [C] 25 mm. Rupees Three hundred Ninety Seven

Paise Eighty Seven Only

334 [D] 32mm. Rupees Four hundred Ninety Six Paise

Forty Three Only

335 [E] 40mm. Rupees Six hundred Two Paise Seventy

336 [F] 50mm. Rupees Seven hundred Eighty Seven

Paise Forty Only

337 Providingandfixingconcealedcenterpointtowallceiling&floorCPVC(SDR

13.5)PIPEhavingNationalSanitationFoundation(NSF)sealforpotablewa

Rupees One hundred Sixty Six Paise

teroffollowingdia.nominalboretubefittingsandclampsincludingmaking Rmt

Eighty Six Only

goodthewall, ceiling and floor etc. complete.[A] 15 mm.

338 Providingandfixingconcealedcenterpointtowallceiling&floorCPVC(SDR

13.5)PIPEhavingNationalSanitationFoundation(NSF)sealforpotablewa

Rupees Two hundred Four Paise One

teroffollowingdia.nominalboretubefittingsandclampsincludingmaking Rmt

goodthewall, ceiling and floor etc. complete. [B] 20 mm.

339 Providingandfixingconcealedcenterpointtowallceiling&floorCPVC(SDR

13.5)PIPEhavingNationalSanitationFoundation(NSF)sealforpotablewa

Rupees Two hundred Forty Nine Paise

teroffollowingdia.nominalboretubefittingsandclampsincludingmaking Rmt

Seventy Two Only

goodthewall, ceiling and floor etc. complete. [C] 25 mm

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

340 Providingandfixingconcealedcenterpointtowallceiling&floorCPVC(SDR

13.5)PIPEhavingNationalSanitationFoundation(NSF)sealforpotablewa

Rupees Three hundred Thirty Three

teroffollowingdia.nominalboretubefittingsandclampsincludingmaking Rmt

Paise Sixty Six Only

goodthewall, ceiling and floor etc. complete. [D] 32mm

341 Providingandfixingconcealedcenterpointtowallceiling&floorCPVC(SDR

13.5)PIPEhavingNationalSanitationFoundation(NSF)sealforpotablewa

Rupees Four hundred Forty Two Paise

teroffollowingdia.nominalboretubefittingsandclampsincludingmaking Rmt

goodthewall, ceiling and floor etc. complete. [E] 40mm.

342 Providingandfixingconcealedcenterpointtowallceiling&floorCPVC(SDR

13.5)PIPEhavingNationalSanitationFoundation(NSF)sealforpotablewa

Rupees Six hundred Fifty Three Paise

teroffollowingdia.nominalboretubefittingsandclampsincludingmaking Rmt

Seventy Seven Only

goodthewall, ceiling and floor etc. complete. [F] 50mm.

343 Providinglayingandjointingintruelineandlevel15mmdia.U.P.V.C.Pipe(S

40)forcoldwaterincludingfittingsmakePRINCE/SUPREME/ASTRAL/FIN

OLEXorequivalentasapprovedbyEngineerInCharge.Pipeshallbefixedon Rupees Seventy Two Paise Sixty Five

thewallwiththehelpofclampateverytwometreC/Corshallbeconcelledasd Only

irectedincluding necessary fittings etc. including testing of

pipeandjointsandfixingthesamewithadhesivesolvent, including cost

of all materials.

344 Providinglayingandjointingintruelineandlevel25mmdia.U.P.V.C.Pipe(S

40)forcoldwaterincludingfittingsmakePRINCE/SUPREME/ASTRAL/FIN

OLEXorequivalentasapprovedbyEngineerInCharge.Pipeshallbefixedon Rupees Ninety One Paise Eighty Four

thewallwiththehelpofclampateverytwometreC/Corshallbeconcelledasd Only

irectedincluding necessary fittings etc. including testing of

pipeandjointsandfixingthesamewithadhesivesolvent, including cost

of all materials.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

345 Providinglayingandjointingintruelineandlevel32mmdia.U.P.V.C.Pipe(S

40)forcoldwaterincludingfittingsmakePRINCE/SUPREME/ASTRAL/FIN

OLEXorequivalentasapprovedbyEngineerInCharge.Pipeshallbefixedon Rupees One hundred Nineteen Paise

thewallwiththehelpofclampateverytwometreC/Corshallbeconcelledasd Fifteen Only

irectedincluding necessary fittings etc. including testing of

pipeandjointsandfixingthesamewithadhesivesolvent, including cost

of all materials.

346 Providinglayingandjointingintruelineandlevel40mmdia.U.P.V.C.Pipe(S

40)forcoldwaterincludingfittingsmakePRINCE/SUPREME/ASTRAL/FIN

OLEXorequivalentasapprovedbyEngineerInCharge.Pipeshallbefixedon Rupees One hundred Forty Eight Paise

thewallwiththehelpofclampateverytwometreC/Corshallbeconcelledasd Twelve Only

irectedincluding necessary fittings etc. including testing of

pipeandjointsandfixingthesamewithadhesivesolvent, including cost

of all materials.

347 Providinglayingandjointingintruelineandlevel50mmdia.U.P.V.C.Pipe(S

40)forcoldwaterincludingfittingsmakePRINCE/SUPREME/ASTRAL/FIN

OLEXorequivalentasapprovedbyEngineerInCharge.Pipeshallbefixedon Rupees One hundred Ninety Five Paise

thewallwiththehelpofclampateverytwometreC/Corshallbeconcelledasd Sixty Seven Only

irectedincluding necessary fittings etc. including testing of

pipeandjointsandfixingthesamewithadhesivesolvent, including cost

of all materials.

348 Providing,layingandjointingintruelineandlevel160diametreU.P.V.C(Ty

peB)conformingtoIS13592-

1992withoneendplainandotherendsocketedwithrubberring,&fittingsco

nformingtoISI14735-

1999ofapprovedmakefordrainagesystempipeline,pipeshallbejointedwi Rupees Eight hundred Thirty One Paise

theachotherwithrubberlubricant,pipeshallbefixedonwallusingofPVCcla Rmt

Twenty Two Only

mpofthesize160mmdiametrex210mmlengthx196mmheighatevery200

0mmcentertocenterorshallbeconcealednwallsasdirectedincludingnece

ssaryfittingssuchasbends,shoesetc.includingtestingofpipesandjointsa

ndjointedwithadhesivesolventcementincluding cost of all materials.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

349 Providing and fixing to wall ceiling and floor 6.0 KgF/Sqcm working

pressure polythelene pipes of the following outside diameter, low

density, complete with special flange compression type fittings, wall m Rupees Seventy Eight Paise Ninety Only

clips etc. making good wall ceiling and floor. [A] 20 mm diameter

350 [B] 25 mm diameter Rupees One hundred One Paise Forty

351 Providing and fixing to wall ceiling and floor 10.0 KgF/Sqcm

working pressure polythelene pipes of the following outside

Rupees One hundred Seventeen Paise

diameter, low density, complete with special flange compression m

type fittings, wall clips etc. making good wall ceiling and floor.[C]

352 Providing and fixing to wall ceiling and floor 10.0 KgF/Sqcm

working pressure polythelene pipes of the following outside

Rupees One hundred Twenty Five Paise

diameter, low density, complete with special flange compression m

Sixty Seven Only

type fittings, wall clips etc. making good wall ceiling and floor.[D]

353 Providing and fixing to wall ceiling and floor 10.0 KgF/Sqcm

working pressure polythelene pipes of the following outside

Rupees One hundred Sixty Seven Paise

diameter, low density, complete with special flange compression m

type fittings, wall clips etc. making good wall ceiling and floor.[E]

354 Providing and fixing to wall ceiling and floor 10.0 KgF/Sqcm

working pressure polythelene pipes of the following outside

Rupees Two hundred Seventy Seven

diameter, low density, complete with special flange compression m

Paise Forty Three Only

type fittings, wall clips etc. making good wall ceiling and floor.[F]

355 Providing and fixing to wall ceiling and floor 10.0 KgF/Sqcm

working pressure polythelene pipes of the following outside

Rupees Three hundred Thirty Six Paise

diameter, low density, complete with special flange compression m

Twenty Four Only

type fittings, wall clips etc. making good wall ceiling and floor.[G]

110 mm diameter

356 Providing and fixing cast iron spigot & socket soil, waste and

Rupees Seven hundred Thirty Nine Paise

ventilating pipes of the following nominal size. (B) 75 mm diameter. m

357 (C) 100 mm diameter. Rupees Eight hundred Ninety Paise

358 Providing and fixing in position cowl vent to pipes. (B) 75 mm Rupees Three hundred Eighty Nine

diameter. Paise Seventy Four Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

359 (C) 100 mm diameter. Rupees Five hundred One Paise Eighty

360 Providing and fixing cast iron (spun) Nahni trap of the following

nominal diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good the Each Rupees Six hundred Six Paise Eight Only

walls and floors 100 mm inlet and 50 mm outlet. © 100mm Dia

361 Providing and fixing water closet squatting pan (Indian type W.C

pan) size 580 mm (earthwork, bed concrte, foot rests and trap to Rupees Nine hundred Thirty Five Paise

be measured and paid for seperately) (A) Vitreous China (I) Long Thirty Six Only

pattern white colour.

362 Providing and fixing wash down water closet (European type W.C

pan) with integral P or S trap including jointing the trap with soil

Rupees One Thousand Three hundred

pipe in cement mortar 1:1 (1 cement : 1 fine sand) (seat and cover Each

Three Paise Seventy One Only

to be measured and paid for seperately) (A) Vitreous China (I)

Long pattern white colour.

363 Providing and fixing 100 mm size P or S trap for water closet

suqtting pan including jointing the trap with the pan & soil pipe in Rupees Three hundred Fourteen Paise

cement mortar 1:1 (1 cement : 1 fine sand) (A) Vitreous China. Ninety Seven Only

364 Providing and fixing in cement mortar 1:3 (1 cement : 3 coarse

Rupees One hundred Fourteen Paise

sand) a pair of white vitreous china 250 mm x 130 mm x 30 mm Pair

Sixty Eight Only

foot rest for long pattern squatting pan water closet.

365 Providing & fixing white colour china vitreous 12.5 lit. low level

flushing cistern with a pair of C.I.or mild steel brackets

etc.complete with fittings such as lead valve less syphon 15mm

nominal size brass ball valve with polythene float, C.P.Brass handle Rupees Two Thousand Three hundred

unions and couplings for connections with inlet,outlet & overflow Each

Forty Four Paise Forty Two Only

pipe 40mm dia porcelain enamelled flush bend including cutting

holes in walls & making good the same,connecting the flush bend

with cistern & closet. (Over flow pipe to be measured and paid for

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

366 Providing & fixing 12.5 lit. high level C.I flushing cistern with a pair

of C.I.or mild steel brackets complete with fittings such as syphonic

arrangement, 15mm nominal size brass ball valve with polythene

Rupees One Thousand Five hundred

float, level, G.I chain (60 cm) & pull unions and couplings for Each

Fifty Four Paise Thirty Two Only

connections with inlet,outlet & overflow pipe etc. including cutting

holes in walls & making good the same, (Over flow pipe to be

measured and paid for seperately).

367 Providing and fixing in position with clamps etc. 32 mm nominal

internal diameter galvanised steel tube flushing pipe for high level

Rupees Three hundred Forty One Paise

flushing cistern including connecting the flush pipe with cistern and m

Eighty Four Only

closet & making good the walls and floors.

368 Providing and fixing G.I inlet connection for flush pipe with W.C pan. Rupees Twenty Five Paise Seventy

369 Providing and fixing plastic seat & cover for wash down water

Rupees Two hundred Ninety One Paise

closet with C.P brass hinges and rubber buffers. (B) Black plastic Each

Thirty Three Only

370 Providing and fixing washbasin with single hole for pillar tap with

C.I.or M.S.brackets painted with including cutting holes and making

Rupees One Thousand Four hundred

good the same but excluding the fittings. (A) vitreous China (II) Each

Fourteen Paise Eighteen Only

Flat back washbasin 550 mm x 400 mm size (I) in white colour.

371 Providing and fixing kitchen sink with C.I.or M.S.brackets painted

with including cutting holes and making good the same but Rupees Two Thousand Two hundred

excluding the fittings. (A) Vitreous China (II) Flat back washbasin Eighty Paise Twenty Seven Only

600 mm x 450 mm x 150 mm size.

372 Providing and fixing C.P brass waste for wash basin or sink (A) 32 Rupees Sixty Seven Paise Ninety One

mm diameter. Only

373 (B) 40 mm diameter. Rupees Eighty Nine Paise Eighty Three

374 Providing and fixing M.I fisher union for wash basin or sink (A) 32 Rupees Seventy Eight Paise Seventy

mm diameter. Five Only

375 (B) 40 mm diameter. Rupees Eighty Eight Paise Sixty Five

376 Providing and fixing 100 mm cast iron grating for gully, floor or Rupees Thirty Six Paise Ninety Eight

Nahni trap. Only

377 Providing and fixing C.P brass shower rose with 15 mm or 20 mm Rupees Two hundred Eighty Two Paise

inlet. (A) 100 mm diameter. Sixteen Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

378 Providing and fixing Hot & Cold wall mixer with provision for

overhead shower with 115 mm long bend pipe with all accessories,

flange etc complete of approved make and Wall Mixer with

Provision For Overhead Shower with 115mm Long Bend Pipe and

Rupees Three Thousand Six hundred

Wall Flange.The work shall be carried out as per the supplier's Each

Thirty Six Only

specification, drawing or as directed by Architect or Engineer in

charge in best workmanship way at all floors, all levels and all

heights. A sample to be got approved from Architect and Engineer

in charge prior to start the work.

379 Providing and fixing 600 mm x 450 mm bevelled edge mirror of

superior glass mounted on 6 mm thick A.C sheet or plywood sheet Rupees Eight hundred Ten Paise Fifty

and fixed to wooden plugs with C.P brass screws (B) 600 mm x 20 Only

380 Providing and fixing C.P brass towel rail complete with C.P brass

Rupees Six hundred Three Paise

bracket fixed to wooden plugs with C.P brass screws. (B) 600 mm x Each

381 Providing and fixing 600 mm x 120 mm glass shelf with C.P bracket

Rupees Five hundred Sixty Six Paise

and guard rail complete, fixed to wooden plugs with C.P brass Each

Sixty Four Only

382 Providing and fixing toilet paper holder (A) C.Brass. Rupees Four hundred Eighteen Paise

Sixty Eight Only

383 Providing and fixng screw down bib taps of following size (A) Brass

Rupees One hundred Eighty Six Paise

screw down bib tap polished bright (I) 15 mm diameter. Each

Eighty Three Only

384 Providing and fixng screw down bib taps of following size(A) Brass

Rupees Two hundred Fourteen Paise

screw down bib tap polished bright (II) 20 mm diameter. Each

Eighty One Only

385 Providing and fixng screw down bib taps of following size(B) Brass

Rupees One hundred Eighty Six Paise

chromium plated screw down bib tap (I) 15 mm diameter. Each

Eighty Three Only

386 Providing and fixng screw down bib taps of following size(B) Brass

Rupees Two hundred Fourteen Paise

chromium plated screw down bib tap (II) 20 mm diameter. Each

Eighty One Only

387 Providing and fixng screw down bib taps of following size(C) Gun Rupees One hundred Fifty Eight Paise

metal screw down bib tap (I) 15 mm diameter. Eighty Six Only

388 Providing and fixng screw down bib taps of following size(C) Gun Rupees One hundred Seventy Seven

metal screw down bib tap (II) 20 mm diameter. Paise Eighty Five Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

389 Providing and fixng pillar tap, capstan head, screw down high

Rupees Three hundred Eight Paise

pressure with screws, shanks and back nuts. (I) 15 mm diameter. Each

Seventy Three Only

390 (II) 20 mm diameter. Rupees Three hundred Fifty Four Paise

Sixty Nine Only

391 Providing and fixng brass screw down stop tap (A) 15 mm diameter. Rupees Two hundred Five Paise Eighty

392 (B) 20 mm diameter. Rupees Two hundred Twenty Three

Paise Eighty One Only

393 (C) 25 mm diameter. Rupees Two hundred Twenty Paise

Eighty Two Only

394 Providing and fixng gun metal check or non-reurn full way wheel Rupees One hundred Eighty Six Paise

valve (A) 15 mm diameter. Eighty Three Only

395 (B) 20 mm diameter. Rupees Two hundred Three Paise Eighty

396 (C) 25 mm diameter. Rupees Four hundred Twenty Paise

Sixty Three Only

397 (D) 32 mm diameter. Rupees Three hundred Fourteen Paise

Seventy Three Only

398 (E) 40 mm diameter. Rupees Six hundred Sixty Three Paise

Forty Three Only

399 Providing and fixng chromium plated brass half turn flush cock of

Rupees Two hundred Fifty Four Paise

approved quality including fixing in pipe line etc. cmplete. (I) 20 Each

Seventy Eight Only

400 (II) 25 mm diameter. Rupees Two hundred Sixty Three Paise

Seventy Seven Only

401 (III) 32 mm diameter. Rupees Two hundred Seventy Five Paise

Seventy Six Only

402 Providing and fixing urinal of approved quality including connecting

the urinal with waste pipe, trap etc. complete (A) White Rupees One Thousand Thirty Six Paise

earthenware flat back or corner type size 430 mm x 260 mm x 350 Twenty Seven Only

403 Providing and fixing urinal of approved quality including connection

with trap and with integral longitudinal flush pipe (A) Squatting Rupees One Thousand Five hundred

pattern white earthenware 550 mm x 300 mm. Fifty Paise Ninety Nine Only

404 Providing and fixing rubber plug for sink or wash basin.

Each Rupees Seventeen Paise Fifteen Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

405 Providing and fixing chromium plated bottle trap with necessary Rupees Two hundred Ninety Five Paise

coupling of approved quality for washbasin. Eighty Only

406 Providing and fixing, screw down brass chromium plated two way bib

taps of approved make, on GI lines, of 15 mm. dia., with or without extension Rupees One Thousand Four hundred

piece and flange, as approved by the Architect and Engineer-in-charge etc. Fourteen Only

407 Providing and fixing ball cock of approved quality as directed. (A) Rupees One hundred Thirty Two Paise

Copper metal. (I) 25 mm diameter. Eighty Nine Only

408 (A) Copper metal. (II) 50 mm diameter. Rupees One hundred Eighty Nine Paise

Eighty Four Only

409 (B) Abonite. (I) 25 mm diameter. Rupees One hundred Two Paise Ninety

410 (B) Abonite. (I) 50 mm diameter. Rupees One hundred Thirty Seven Paise

Eighty Nine Only

411 Providing and fixing C.I manhole cover 0.60 mt x 0.45 mt size

Rupees One Thousand One hundred

having weight not less than 35 Kg. Each

Thirty Paise Sixty Four Only

412 Providing and fixing G.I rain water spout of 50 mm diameter and Rupees One hundred One Paise Ninety

30 cm length. One Only

413 Providing erecting and fixing three coated white Syntex

PVC. (ISI) water tank of required capacity each with all

Liter Rupees Twelve Paise Ninety Three Only

necessary fittings and connection etc. complete on terrace.

414 Providing and laying (To level or slopes)& joining with stiff, mixture

of cement mortar in proportion 1:1, salt glazed stoneware pipes

Rupees Two hundred Thirteen Paise

following nominal internal diameters including testing of pipes and m

joints complete. [A] 100 mm. diameter.

415 [B] 150 mm. diameter. Rupees Two hundred Ninety One Paise

416 Providing and laying cement concrete 1:5:10 (1 cement : 5 fine

sand : 10 graded stone aggregate 40 mm nominal size) bedding for

Rupees One hundred Twenty Seven

stone ware pipes of following internal diameter with necessary m

Paise Sixteen Only

formwork and curing complete. (A) 100 mm diameter (112 mm

average bed thickness)

417 (B) 150 mm diameter (166 mm average bed thickness) Rupees Two hundred Thirteen Paise

Seventy One Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

418 Extra over item 24.1 for providing alst glazed stoneware fitting. (I)

Bends of required degree (any radious) of following internal Each Rupees Fifty Six Paise Seventeen Only

diameters. (A) 100 mm diameter.

419 (I) Bends of required degree (any radious) of following internal Rupees Sixty Three Paise Seventy Nine

diameters. (B) 150 mm diameter. Only

420 (II) Tapper bends of required degree of following internal

Rupees Seven Thousand Four hundred

diameters. (A) 100 mm x 150 mm Each

Thirty Two Paise Fifty Nine Only

421 (III) Single junction of required degree of following internal Rupees Sixty Seven Paise Eighty Two

diameters. (A) 100 mm diameter. Only

422 (III) Single junction of required degree of following internal Rupees One hundred Twenty Paise

diameters. (B) 150 mm diameter. Forty Two Only

423 Providing and jointing & pointing with stiff mixture of cement

Rupees One hundred Eighty Paise

mortar 1:1 (1 cement : 1 fine sand) 150 mm internal diameter salt m

Ninety Five Only

glazed stoneware hlaf round channels.

424 Providing and fixing S.W. Gully trap with C.I. grating brick masonry

chamber & water tight C.I. cover with frame of 300 mm x 300 Rupees One Thousand Two hundred

mm.size (inside) with standard weight. [I] Square mouth trap (A) Ninety Two Paise Nineteen Only

100 mm. x 100 mm. size P-type.

425 Providing and fixing S.W. Gully trap with C.I. grating brick masonry

chamber & water tight C.I. cover with frame of 300 mm x

Rupees One Thousand Two hundred

mm.size (inside) with standard weight. [I] Square mouth trap (B) Each

Forty Six Paise Ninety Two Only

150 mm. x 100 mm. size P or R type.

426 Providing and laying (To level or slopes) and jointing reinforced

concrte loght duty Non-pressure pipes I.S Class NP2 of the

Rupees Two hundred Forty Eight Paise

following internal diameter with collars and butt ends prepared for m

Sixty Seven Only

collar joints including testing of joints complete. (B) 150 mm

427 (C) 250 mm diameter. Rupees Three hundred Forty Eight Paise

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

428 Constructing manhole with R.C.C top slab in 1:2:4 mix (1 cement :

2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

foundation concrte 1:3:6 mix (1 cement : 3 coarse sand : 6 brick

bats 40 to 50 mm nominal size) inside plastering 15 mm thick with

cement mortar 1:5 (1 cement : 5 coarse sand) finished with a

floating coat of neat cement slurry and making channels in cement

concrte 1:2:4 mix ( 1 cement : 2 coarse sand : 4 stone aggregate

20 mm nominal size) finished smooth complete including curing & Rupees Eleven Thousand Twenty Nine

testing (I) Inside size 900 mm x 1200 mm and 1.50 meter deep Paise Ninety Seven Only

including C.I cover with frame size 560 mm diameter total weight

of cover an d frame to be not less than 128 Kgs (Weight of cover

64 Kg & weight of frame 64 Kg) (A) with 230 mm thick walls of

brick masonry using bricks having crushing strength not less than

35 Kg / Sqcm in cement mortar 1:5 (1 cement : 5 coarse sand) (1)

A-type depth 0.90 meter for 150 mm diameter sewer.

429 (2) B-type depth 1.50 meter for 150 mm diameter sewer. Rupees Nineteen Thousand Three

hundred Thirty Paise Forty Six Only

430 (3) C-type depth 2.24 meter for 150 mm diameter sewer. Rupees Twenty Three Thousand Four

Each hundred Forty One Paise Seventy Four

431 Extra rate for constructing B.B masonry for every additional depth

Rupees Five hundred Twenty Two Paise

0.10 meter or part thereof over item 24.27 (I) for depth from 0.90 Each

Ninety Six Only

meter to 1.50 meter.

432 Extra rate for constructing B.B masonry for every additional depth

Rupees Three hundred Ninety Seven

0.10 meter or part thereof over item 24.27 (II) for depth from 1.50 Each

Paise Nineteen Only

meter to 2.25 meter.

433 Extra rate for constructing B.B masonry for every additional depth

Rupees Five hundred Fifty Paise Forty

0.10 meter or part thereof over item 24.27 (III) for depth from Each

2.25 meter to 3.15 meter.

434 Extra rate for constructing B.B masonry for every additional depth

Rupees Six hundred Fifty Three Paise

0.10 meter or part thereof over item 24.27 (IV) for depth above Each

435 Providing and fixing iron steps of size 500 mm x 150 mm x

Rupees One hundred Sixty Three Paise

mm and painting with two coats of anticorrosive paint etc. Each

Eighty Five Only

436 Supplying and fixing C.I cover 300 mm x 300 mm without frame for

Rupees Four hundred Ninety Six Paise

gully trap (Standard pattern) the weight of cover to be not les than Each

Seventy Two Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

437 Constructing brick masonry road gully chamber 500 mm x 450 mm

Rupees Two Thousand Seventeen Paise

x 600 mm including 500 mm x 450 mm C.I horizontal grating with Each

frame complete.

438 Constructing brick masonry road gully chamber 450 mm x 450 mm

Rupees Two Thousand Five hundred

x 775 mm with vertical grating complete. Each

Forty Five Paise Eighty Six Only

439 Constructing brick masonry road gully chamber 1100 mm x

Rupees Five Thousand One hundred

mm x 775 mm including 500 mm x 450 mm C.I horizontal grating Each

Twenty Eight Paise Fifty Eight Only

with frame & vertical grating complete.

440 Constructing brick masonry chamber for underground C.I.

inspection chamber and bends with bricks having crushing strength

not less than 35 kg./Sqcm. In C.M. 1:5 C.I. cover with frame (Light

duty) 455 mm. x 610 mm. internal dimension, total weight of cover

with frame to be not less than 38 kg. (Weight of cover 23 kg. and

weight of frame 15 kg.) R.C.C. top slab of cover 23 kg. and weight Rupees Two Thousand Nine hundred

of frame 15 kg.) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse Each.

Thirty Two Paise Ninety Three Only

sand : graded stone aggregate 20 mm. nominal size) foundation

concrete 1:5:10 inside plaster 15 mm. thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete. [I] Inside dimensions 455 mm. x

mm. & 450 mm. deep for single pipe

441 Constructing brick masonry chamber for underground C.I.

inspection chamber and bends with bricks having crushing strength

not less than 35 kg./Sqcm. In C.M. 1:5 C.I. cover with frame (Light

duty) 455 mm. x 610 mm. internal dimension, total weight of cover

with frame to be not less than 38 kg. (Weight of cover 23 kg. and

weight of frame 15 kg.) R.C.C. top slab of cover 23 kg. and weight Rupees Three Thousand Six hundred

of frame 15 kg.) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse Each.

Sixty Paise Seventy Six Only

sand : graded stone aggregate 20 mm. nominal size) foundation

concrete 1:5:10 inside plaster 15 mm. thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete[II] Inside dimensions 500 mm. x

mm. & 450 mm. deep for pipe lines one or two.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

442 Constructing brick masonry chamber for underground C.I.

inspection chamber and bends with bricks having crushing strength

not less than 35 kg./Sqcm. In C.M. 1:5 C.I. cover with frame (Light

duty) 455 mm. x 610 mm. internal dimension, total weight of cover

with frame to be not less than 38 kg. (Weight of cover 23 kg. and

weight of frame 15 kg.) R.C.C. top slab of cover 23 kg. and weight

of frame 15 kg.) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse Rupees Seven Thousand One hundred

sand : graded stone aggregate 20 mm. nominal size) foundation Eighty Paise Forty Four Only

concrete 1:5:10 inside plaster 15 mm. thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete[III] Inlets dimensions 600 mm. x

mm. & 450 mm. deep for pipe lines with three or more inlets.

443 Extra over item 24.44 for every additional depth of 0.10 meter or

Rupees Two hundred Forty Two Paise

part thereof beyond 450 mm depth for brick masonry chamber. (I) Each

Thirty Nine Only

For 455 mm x 610 mm

444 Extra over item 24.44 for every additional depth of 0.10 meter or

Rupees Two hundred Sixty Four Paise

part thereof beyond 450 mm depth for brick masonry chamber. (II) Each

Eighty Six Only

For 500 mm x 700 mm

445 Extra over item 24.44 for every additional depth of 0.10 meter or

Rupees Three hundred Twenty Five

part thereof beyond 450 mm depth for brick masonry chamber. Each

Paise Fifty Nine Only

(III) For 600 mm x 850 mm

446 (A) Providing sock pit of 2.0 Cmt volume including excavating,

filling brick bats with dry masonry work at top for 45 cm height Rupees One Thousand Three hundred

including providing vatas in cement mortar 1:3 with finishing, Forty Eight Paise Twenty Six Only

curing etc. complete.

447 Providing and fixing EZ-7 section door/window/frame including

Rupees Seven hundred Twenty Eight

welding and fixtures fastenings including three coats of approved sqm

Paise Fifty Six Only

enamel oil paint etc. complete.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

448 Provding and fixing extruded aluminum window having extruded

aluminium colour anodized section frame main outer size 127mm x

38.10 mm x 1.35 mm (of Jindal Section no. 2443, @ Wt.1.384

Kg/mt) horizontal Four track member size 122.20 mm x 31.75 mm

x 1.10 mm ( of Jindal section no :8787, @ Wt 1.205 kg/mt),

vertical member of size 122.20 mm x 31.75 mm x 1.50 mm (of Rupees Two Thousand One hundred

Jindal Section no. 8935 @wt. of 0.456 kg / mt) vertical member of Forty Paise Thirty Three Only

size 40 mm x 18 mm x 1.29 mm (of Jindal Section 8948, @Wt

0.457 kg/mt) with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminuim fittings and fixtures and

tranparent silicon sealent glass fixing to frame as per details etc

449 Providing and fixing window having extruded aluminium colour

anodized section frame main outer size 95 mm x 24 mm x

mm (of Jindal Section no. 2459 @ wt of 0.738 kg /mt) horizontal

three track member size 92 mm x 31.75 mm x 1.30 mm (of jindal

section no. 8688 , @ wt.1.07 kg/mt) vertical member of size

92mm x 31.75 mm x 1.50 mm (of Jindal section no. 8933 @ wt Rupees One Thousand Five hundred

1.06 kg/ mt) with sliding shutters of horizontal member size sqm

Eighty Three Paise Ninety Five Only

40mm x 18 mm x 1.29 mm (of Jindal section no. 8947 @ wt of

0.456 kg / mt) vertical member of size 40mm x 18 mm x 1.29mm

(of jindal section no. 8949 @ wt of 0.456 kg / mt / with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminium fittings and fixtures and transparent sealent glass fixing

P & F window having extruded aluminium colour anodized section

frame main outer size 63.50 x 38.10 x 1.95 mm ( of jindal section

no. 4605 @Wt 1.094 kg /Rmt) horizontal two track member size

61.85 mm x 31.75 mm x 1.20 mm (of Jindal section no. 8687 @ wt

of 0.695 kg / mt ) vertical member of size 61.85 mm x 31.75 mm x

1.30 mm ( of Jindal section no. 8758 @wt of 0.0.659 kg / mt) Rupees One Thousand Seven hundred

with sliding shutters of horizontal member size 40 mm x 18 mm x sqm

Thirteen Paise Seventy Only

1.29 mm (of Jindal Section no ; 8947 @wt of 0.456 kg/mt Section

8948 @ wt. 0.457 kg / mt) with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminium fittings and

fixtures and transparent silicon sealant glass fixing to frame as per

details etc complete for

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

451 P & F standared extruded of alluminium section of size 63.50 x

38.10 x 1.95 mm ( of Jindal section no. 4605, @ wt 1.094 kg / Rmt

with colour anodized alluminum frame with 5 mm thick transparent Rupees One Thousand Three hundred

bronze colour tinted float glass with colour anodized alluminium One Paise Eighty Two Only

frame for ventilation wiht 5 mm thick frosted glass as details etc

complete for window

452 P & F standared extruded of alluminium section of size 63x 38.10 x

1.2 mm ( of Jindal section no. 2434, @ wt 0.643 kg / Rmt with Rupees One Thousand One hundred

colour anodized alluminum frame with 5 mm thick frosted glass as Seventy Five Paise Fifty Six Only

details etc complete for ventilation

453 P & F standared extruded of alluminium section of size 63.50x

38.10 x 1.95 mm ( of Jindal section no. 4605, @ wt 1.094 kg / Rmt

Rupees One Thousand Five hundred

with colour anodized alluminum frame with 5 mm thick transparent sqm

Twenty Four Paise One hundred Only

bronze colour tinted float glass as details etc compete for Fix

454 P & F extruded aluminium window having extruded aluminium

colour powder coated section frame main outer size 127mm x

38.10 mm x 1.35 mm of ( jindal section no. 2443 @ Wt. 1.384 kg/

mt) horizontal Four track member size 122.20 mm x 31.75 mm x

1.10 mm (of Jindal section no. 8787 @ Wt. 1.205 kg / mt) vertical

member of size 122.20 mm x 31.75 mm x 1.50 mm (of jindal

section no. 8935 @ Wt.1.398 kg / mt)with sliding shutters of

horizontal member size 40 mm x 18 mm x 1.29 mm (of Jindal Rupees Two Thousand One hundred

section no.8949 @ wt of 0.456 Kg / mt) vertical member of size 40 Forty Paise Thirty Three Only

mm x 18 mm x 1.29 mm (of Jindal section no. 8947 @ Wt of

kg/mt, section 8948 @ wt. 0.457 kg / mt) with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminium fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc compete for

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

455 P & F window having extruded aluminum colour powder coated

section frame main outer size 95 mm x 24 mmx 1.17 mm ( of

Jindal section no. 2459 @ wt of 0.738 kg / mt) horizontal Three

track member size 92 mm x 31.75 mm x 1.30 mm (of Jindal

section no. 8688 @ Wt 1.07 kg/ mt) vertical member of size

mm x 31.75 mmm x 1.50 mm (of Jindal section no. 8947 @ wt of Rupees One Thousand Five hundred

0.456 kg / mt vertical member of size 40 mm x 18 mm x 1.29 mm ( Ninety One Paise Eighty Seven Only

of Jindal section no. 8949 @ wt of 0.456 kg / mt with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminium fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc complet.

456 P & F window having extruded aluminium Colour Powder Coated

section frame main outer size 95mm x 24mm x 1.17 mm ( of

Jindal Section no. 2459 @Wt. of 0.738 kg/ mt ), horizontal Three

track member size 92mm x 31.75 mm x 1.30 mm (of Jindal

Section no. 8688, @ Wt. 1.07 Kg / mt) veritcal member of size

mm x 31.75 mm x 1.50 mm (of Jindal section no. 8933 @ wt.

kg /mt) with slding shutters of horizontal member size 40mm x 18 Rupees One Thousand Seven hundred

mm x 1.29 mm ( if Jindal section no. 8947 @wt of 0.456 kg / mt ) sqm

Five Paise Sixty Seven Only

vertical member of size 40 mm x 18 mm x 1.29 mm (of Jindal

section no. 8949 @wt of 0.456 kg/mt with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminium

fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details etc compete.

457 P & F standared extruded of alluminium section of size 63.50 x

38.10 x 1.95 mm ( of Jindal section no. 4605, @ wt 1.094 kg / Rmt

with colour Powder coated alluminium bronze colour tinted float Rupees One Thousand Two hundred

glass with colour anodized alluminium frame for ventilation with 5 Ninety Paise Eighty One Only

mm thick frosted glass as details etc compete for window.

458 P & F standared extruded of alluminium section of size 63x 38.10 x

1.2 mm ( of Jindal section no. 2434, @ wt 0.643 kg / mt with

Rupees One Thousand One hundred

colour powder coated alluminium frame for ventilation with 5 mm sqm

Seventy Five Paise Fifty Six Only

thick glass as details etc complete for ventilation.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

459 P & F standered exturded of alluminium section of size 63.50x

38.10 x 1.95 mm ( of Jindal Section no. 4605 @wt 1.094 kg / Rmt

Rupees One Thousand Eight hundred

with colour powder coated alluminium frame with 5 mm thick sqm

Thirty Three Paise Twenty Nine Only

transparent bronze colour tinted float glass as details etc compete

for Fix window.

460 Supply of Water Tanker Capacity 5000 Litter Nos Rupees Eight hundred Eight Only

461 Providing and laying broken chine mosaic flooring for terrace using

12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered Rupees Seven hundred Forty Seven

to bring mortar creme out upto surface using white cement Sq.M.

Paise Twenty Nine Only

including rounding off junctions and extending them upto 15 cm

along the wall,clearing with water and oxalic acid etc. as directed.

462 Providing & laying sandwich platform comprising of a) Sandwich of

18 mm thick single side polish Granite of approved size, shade and

sample on top and 25 mm thick polished kota in bottom with 25mm

thick cement mortar (1:4) in between b) At centre vertical sandwich

supports of 25 mm thick two kota stone on sides and 20mm CM

(1:4) in between and at both end walls vertical supports of 18 mm

thick double side granite. c) 75 mm raised platform at bottom with

kota on top and 50mm CM (1:4) at bottom, kota stone skirting as Rupees Five Thousand Two hundred

per design and approved sample. The rate includes rounding, Thirty Five Paise Eighty Four Only

champhering and mirror polishing of edges, facias of granite, MS

support including necessary bonding adhesive (if required) of BASF

/ Fosroc / BAL / Laticrete / Kerakoll or equivalent as per approved

make. Rate shall be also inclusive of making holes & cutouts for SS

sink, Oval wash basin, Piller tap / Bib tap etc. as directed by

engineer in charge. (Only plan area shall be measured & paid for).

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

463 Providing & fixing in position standard extruded Aluminium

Partition with Colour anodized of 30 micron hollow section frame

(any Span Should not be wide than 0.90 mtr)of approved shade &

pivoted single shutter fabricated from alluminium standard section

for outer frame size 101 mm x 44.5 mm (of app. Wt. 1.2 kg / Rmt.)

and door styles and top rial of alluminium section size 47.5mm x

44.5 mm (of app. Wt. 1.05 kg/ Rmt.) Bottom rail & lockrail for door

of size 114mm x 44.5mm (of app. Wt 1.30 Kg./Rmt.) and Rupees Three Thousand Six hundred

providing rubber gasket and glazing chips around the glass allover Sixty One Paise Twenty Five Only

including providing heavy handle, heavy lock, Door Closer,bracket,

stoppers. 5 mm th. transparent float glass of copper/ gray tint

(Structural Glass) fixed with transparent silicon gasket and 6 mm

thick compact Sheet in bottom panel including all required

materials labours and equipments as per detailed drwg. as directed.

464 providing and fixing alluminium colour anodized single shutters

door having standared extruded alluminium colour anodized of

micronhollow sections frame of size 101 mm x 44.5 mm

(aproximate wt 1.2 kg per Rmt) and door styles and top rail of

alluminium section size 47.5 mm x 44.5 mm (approximate wt

kg per rmt) and bottom rail and lock rail per door of size 114 mm x

44.5 mm ( aproximate wt 1.3 kg per rmt) and providing rubber Rupees Three Thousand Four hundred

gasket and glazing clips around the glass all over including Thirty Five Paise One Only

providing 6 mm thick compact sheet with fixing Glasing clips 19 X

17 mm including providing heavy locks handels stopers pivots door

closers and Ground Glass 5 mm thick (Frosted or obscured on one

side) on top with fixing Glasing clips 19 X 17 mm including all

labour and equipments etc complete

465 Providing and Fixing compact sheet ISI 6 mm thick for alluminium

Rupees One Thousand Five hundred

section door includingRubber packing And labour all lead and Lift smt

Eighty Four Paise Sixty Nine Only

466 Providing & fixing 10 " long Aldrop alluminum with necessary Rupees One hundred Seventy Nine

screws etc. complete as approved by Engneer in charge Paise Seventy Eight Only

467 Providing and fixing S.S stoper 30 cm long including neccessory Rupees Three hundred Thirty One Paise

screw and labour Etc.comp Twenty Eight Only

468 Providing and fixing 4x1"x1" S.S. hinges with necessary screws Rupees One hundred Sixty One Paise

etc. complete as approved by Engineer-in-charge. Sixty Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

469 Providing & fixing S.S handles with necessary screws etc. Rupees One hundred Eighty Seven Paise

complete. 150 mm length Eighty Six Only

470 Providing & fixing hydraulic door closer capacity of 130 kg (to carry

Rupees Eight hundred Ninety Eight

a door width upto 1200mm) with screws to pivoted / hinged door each

Paise Ninety Only

of approved make & color Etc.comp..

471 Providing and fixing brass chromium plated surgical handle cock of Rupees Seven hundred Forty One Paise

approved size 15 mm dia etc complete. Thirty Four Only

472 Providing & fixing 150 mm X 150mm S.S.jali for floor or nahni

Rupees One hundred Seventeen Paise

trap.etc. complete as approved by the engineer incharge. Each

473 Providing and fixing stainless steel sink(Nirali or Equivalant), single

bowl of size not more than 610 x 460mm and depth 200mm,

comprising of: a) stainless steel sink supported on MS or CI

brackets. b) 1 no. 40 or 32mm PVC bottle-trap of approved quality

with extension piece to wall, wall flange with rubber adopter for

waste connection and one waste coupling. c) 1 no. heavy quality

CP brass angular stopcock with wall CP flange of Jaquar make Rupees Three Thousand Seven

Continental series Cat. No. 053, 15mm size. d) 1 no. 15mm NB Each hundred Ninety Four Paise Fifty Seven

heavy quality CP-brass inlet connection with unions at end e) Only

15mm NB CP brass heavy quality wall or floor mounted Sink Tap,

Swivelling type with CP wall flange of Jaquar Continental Series Cat

No. 359. including cutting and making good the walls and floors

wherever required complete as per direction of engineer-in-charge

at any height, floor and level.

474 Providing and fixing Heavy duty approved quality SFRC cover with

Frame to Existing Chambers of Size as below its including the cost

Rupees One Thousand Three hundred

of necessary touching of damage plaster and cleaning of site as per Each

Eighty Three Paise Seventy Only

instruction of Engineer incharge

475 Providing and fixing Heavy duty approved quality SFRC cover with

Frame to Existing Chambers of Size as below its including the cost

Rupees One Thousand Two hundred

of necessary touching of damage plaster and cleaning of site as per Each

Nine Paise Ninety Eight Only

instruction of Engineer incharge

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

476 Providing and fixing in true horizontal level 600 mm. X 600 mm.

false ceiling system manufactured by M/s. Armstrong World

Industries using hot dipped galvanized steel section, exposed

surface with pre-coated capping, main tee of size 24 x 32 mm.,

having 0.27 mm gauge at every 1200 mm. centre to centre

maximum and rotary stitched cross tee of size 24 x 27 mm, having

0.27 mm gauge at every 600 mm. c/c. and sub cross tee of size

x 27 mm, having 0.25 mm gauge at 1200 mm c/c. and wall angle

of size 19 x 19 mm., having 0.35 mm gauge fixed to the periphery

of the wall. The above grid is suspended at every 1200mm c/c. in

Rupees One Thousand Three hundred

both directions using 2.0 mm. thick pre-straightened GI wire laying smt

Twenty Eight Paise Fifteen Only

FINE FISSURED BUTT Edge ceiling tiles manufactured by M/s.

Armstrong World Industries, of size 600mmx600mmx15mm

having NRC 0.55, Light reflectance of >84% (WT), thermal

conductivity k = 0.052-0.057 W/m0K, Humidity Resistance of

99% , having Fire Performance CLASS O / CLASS 1 (BS 476),

surface having 3 coats of white paint with Fine Fissured, back of

the tile duly sanded and finished with a coat of protective paint

over the formed grid complete

477 Unskilled Labour Rupees Four hundred Fifty Six Paise

478 Labour Charge - Maason 1st class Rupees Seven hundred Twenty Paise

479 Labour Charge - Plumber(Fitter) Rupees Seven hundred Three Paise

Ninety Seven Only

480 Labour Charge - Plumber(Fitter) Assist Rupees Five hundred Seventy Five Paise

481 Labour Charge - Carpenter 1st Class Rupees Seven hundred Thirty Two Paise

Twenty Five Only

482 Labour Charge - Chowkidar Rupees Five hundred Nineteen Paise

483 Labour Charge - Mazddor (Male) Rupees Four hundred Ninety Seven

Paise Ninety Three Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

484 Providing fixing hydraulic floorspring with ss cover plate &

adjustable concealed casted top pivot of approved make & color

with one year guarantee like sterling or equvalent.ate shall be Rupees Two Thousand Five hundred

inclusive of cutting of floor neatly grouting the floor spring & Ninety Nine Paise Seventy Four Only

cleaning/polishing the floor & maintaining in good working

condition uptill defect liability period.

485 Providing and fixing UPVC Handle Valve of 65 mm dia. . completed

Rupees One Thousand Eight hundred

at any floor, level and height as directed by Engineer-in-charge. Each

Sixty Two Paise Forty Four Only

486 Providing and fixing UPVC Handle Valve of 50 mm dia. . completed

Rupees Eight hundred Seventeen Paise

at any floor, level and height as directed by Engineer-in-charge. Each

487 Providing and fixing UPVC Handle Valve of 40 mm dia. . completed

Rupees Six hundred Eight Paise Two

at any floor, level and height as directed by Engineer-in-charge. Each

488 Providing and fixing UPVC Handle Valve of 25 mm dia. . completed

Rupees Four hundred Sixty Eight Paise

at any floor, level and height as directed by Engineer-in-charge. Each

Sixty Four Only

489 Providing and fixing UPVC Handle Valve of 15 mm dia. . completed

Rupees Three hundred Sixty Three Paise

at any floor, level and height as directed by Engineer-in-charge. Each

490 Providing and Fixing C.P. Brass including 8 mm dia and 1.0m long

Rupees Seven hundred Eighty Six Paise

flexible tube Health Faucet and Holder including labour charge. Each

Seventy Nine Only

Scientific cleaning of Over Head tank and Under ground sump

including wall cleanning with turbolesor with high pressure and

removed sludge operation in underground water sump wet & dry

cleanning by vaccum pump disinfection with anti bacterial agent Rupees Only

and viral disinfection with U.V radiation and Mosquito distroy with

specify System etc.Complete.

491 (A) upto 5000 Ltr. Rupees Four hundred Thirty Three Paise

Fifty Four Only

492 (B) 5000 to 10000 Ltr. Rupees Six hundred Twelve Paise Six

493 (C) 10000 to 25000 Ltr. Rupees Eight hundred Sixteen Paise

494 (D) 25000 to 50000 Ltr. Rupees One Thousand Five hundred

Thirty Paise Fifteen Only

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

Rupees Two Thousand Seven hundred

Fifty Four Paise Twenty Seven Only

Rupees Four Thousand Two hundred

Eighty Four Paise Forty Two Only

497 Providing & employing JCB Machine to cater to the heavy duty

and/or rapid work needs of moving heavy material or cleaning

Rupees One Thousand One hundred

debrise areas including the cost of operator, fuel and any other Hour

Sixty One Paise Fifty Only

consumeables, to be employed at locations as dirrected by

engineer-in-charge etc. complete.

498 Repairing of gypsum, armstrong, Pvc, Falls ceiling including

Rupees Five hundred Seventy Three

neccessory ceiling material, G.i patti, wire And Labour etc.comp. Smt

Paise Sixty Eight Only

499 Providing Hiring Charge for Mud Pump Including Labour cost etc

Rupees Four hundred Thirty Three Paise

complete including devotering and suggested by executive engineer. Hour

Twenty Nine Only

500 Providing And fixing 1.8 mm F.R.P sheet on chajja or for Shed

Rupees Six hundred Eighty Nine Paise

including screw,washer ,plastic compound and labour Smt

Eighty Three Only

Etc.complete.(steel work will be paid in perticuler item)

This is certify that the rates are adopted as per S.O.R 2024-25

I / We am / are willing to carry out the work * Estimated amount put to Tender

Add / Deduct …………………….. % above / below

1 All works shall be carried out as per Public Work Department and other specification of division or as directed.

2 All the columns in schedules should be filled in ink and the total of the entires ink last column should be struck by the

3 Rates quoted include clearance of site (prior commncement of work and its close). In all respect and hold good for work

4 Servicable materials available after Demolishing / Dismentalling any item should be hand over to the concerned as per

5 To be continued on additional sheets, if found necessary.

ITEM DESCRIPTION UNIT Rate in Words Rate in Figure

Dy. Executive Engineer Executive Engineer

PIU-2 , Ahmedabad PIU-2 , Ahmedabad