Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹2,443
Closing Date
13 Oct 2026, 11:00 am6d left
Executive Engineer
JSD KAtrain
Restoration of rain damages to retrofitting of WSS Aleo Chachoga Jharang in Tehsil Manali Distt Kullu HP repair of damaged HDPE pipe of various dia at different RDs
2026_HPIPH_144892_1
5276-5310 dated 01-10-2026
Open Tender
Civil Works
Item Rate
KATRAIN
Please refer Tender documents.
2 documents required · 2 mandatory
₹350
Yes
₹2,443
Yes
3 Oct 2026
3 Oct 2026
13 Oct 2026
3 Oct 2026
13 Oct 2026
3 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundations, trenches etc., in earth work lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres to the entire staisfaction of Engineer-in-charge with in all leads and lifts. | 24.3 | Cum. | - | - |
| 2Repair of existing distribution network HDPE pipes of following dia with flange joint including pipe ends, MS flange table-5, Gasket, butt fusion joints etc. as per requirement of all accessories complete in all respects as per the entire satisfaction of engineer-in-charge. | |||||
| 2.01 | 140mm PE-80 | 5 | Joint | - | - |
| 2.02 | 110mm PE-80 | 5 | Joint | - | - |
| 2.03 | 90mm PE-80 | 5 | Joint | - | - |
| 3Repair of existing distribution network HDPE pipes of following dia with butt weld joint by generator set with all accessories complete in all respects as per the entire satisfaction of engineer-in-charge. | |||||
| 3.01 | 140mm PE-80 | 30 | Joint | - | - |
| 3.02 | 110mm PE-80 | 40 | Joint | - | - |
| 3.03 | 90mm PE-80 | 25 | Joint | - | - |
| 4Providing and fixing double flanged Cast Iron Sluice valve of follwing dia PN-1.0 of Leader/Kirloskar/Kilburn/Kartar/all approved make conforming to as per IS: 14846-2000 with MS flanges IS: 6392-1971 with hand wheel (and other accessories) with upto amendment as per class PN-1.0 to with standing nominal seat pressure of 10.00 Kg/cm2 flange table-5 including welding of MS flange in two layer i/c carriage in all leads & lifts as per direction and to the entire satisfaction of Engineer-in-Charge. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.64 MB
TC4.pdf
Tender Documents • 0.07 MB
BOQ_215599.xls
BOQ • 0.31 MB
Form6.pdf
Tender Documents • 0.55 MB
Form8.pdf
Tender Documents • 1.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .