GEAF-33/2020-21

Amount

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified.

M&L Non skid ceramic coloured tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.06 Sqm but n.exc. 0.11 Sqm in floors etc. over 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles.

M&L glazed ceramic coloured tiles (300x200)x7mm thick in vertical surfaces over and including 10 mm thick rendering in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles.

M&L non-skid Ceramic coloured printed tiles 7-8mm thick(square/rectangular) polished, area of each tiles exceeding 0.18 sqm but n.exc 0.38sqm in floors etc over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles.

Taking down chowkats or frames (without taking off shutters) having size exc 1.5 Sqm and n. exc. 4.0 sqm each and removing from site complete all as specified.

Taking down chowkats or frames n. exc 1.5 Sqm each with shutters (without taking off shutters from the frames) all as specified

Taking down shutters n exc 1 Sqm each complete all as specified and directed by Engr-in-Charge.

S&F Plain, framed, panelled shutters of 2nd class soft wood (Kail) 35mm thick, (any number of panels), with panels of timber flat on both sides (feathers edged),or of veneers particle board medium density, wood particle board with commercial face veneers, as specified and fitted to chowkats complete all as specified & directed by Engr-in-charge.

S&F of 2nd class hard wood for plain, solid, straight chowkets and frames, wrought, framed rebated on the solids, rounded or chamfered, put together with glue painted at joints,complete all as specified.

S&F 35mm thick 2nd class soft wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) ; supplied and fitted to chowkats complete all as specified and directed directed by Engineer-in-Charge.

S&F Butt hinges 100mm long, medium weight, cold rolled mild steel complete all as specified.

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

S&F 150mm long mild steel barrel tower bolts, Chromium plated finish, with bright bolt complete all as specified and directed by Engineer-in-Charge

S&F for 200mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified.

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

Hacking out old broken glass (any thickness, size, quality or description) from metal/wooden frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in his panel and all as specified.

S&F in repair galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm dia fixed with tinned tacks of galvanised wire staples.

S&F in repairs Aluminium (die cast) Door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg.

Dismantling timber scantling under 40 Sqcm in section in any position of framed work .

Dismantling boarding, any description, fixed in any position with nails fixed with screws complete all as specified.

M&L 9mm thick pre-laminated particle board, interior grade, pre-laminated one side with decorative choice laminaton another side balancing white lamination fixed with screws to timber frame completed all as specified and directed.

M&L for 2nd class soft wood (Kail), plain, fillets, square, rectangular or triangular in section, clean sawn, secured with nails area exc13 Sqcm but not exc 25 Sqcm complete all as specified and directed by Engineer-in-Charge

All as per item No-23 here in before but moulding n exc 3 sqcm bullnosed splayed chamfered or rounded on one edge or face complete all as specified and directed by Engineer-in-Charge

Demolition of PCC Block masonry, pre cast concrete articles and pre cast conrete block walling built in cement mortar all as specified.

M&L for pre cast cement concrete 1:3:6 type C-1 (using 20 mm graded agg) as in concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, 1:6 complete all as specified.

Taking down cement plaster or lime mortar including raking out joints, hacking for key, scruving down with water etc.complete all as specified and directed by Engineer-in-Charge

M&L for 15mm thick rendering on block masonry or concrete surfaces of wall in CM (1:4), finished even and smooth without using extra cement complete all as specified.

M&L for 15mm thick rendering on block masonry or concrete surfaces of wall in CM (1:6), finished even and smooth without using extra cement complete all as specified.

M&L for 10mm thick ceiling plaster on concrete surfaces in CM (1:3), finished even and smooth without using extra cement complete all as specified.

S&F in repair Choromium plated Tubular towel rail 20mm dia, 60 CM long

S&F 10 ltr capacity PVC valve less, Syphonic action type flushing cistern. Low level white with inlet, ball valve float and handle including bracket including PVC connection fixed in repair complete all as specified.

S&F in repair flush pipe of polythene of low or high density or PVC 32mm dia for low level cistren complete all as specified.

SUPPLY and fixed in repairs Wash hand basin vitreous china white flat back size 550mm x 400mm excluding taps but including bracket, PVC connection including cutting of and pinning in ends of bracket including chromium plated brass coupling half or full threaded to the wash basin and 32mm waste pipe,complete all as specified & directed by Engr-in-Charge.

S&F in repairs rotational moulded polythene water storage tanks 500 ltrs capacity, (cylinderical vertical with closed tap) hoisted and fixed in position including 15mm bore float valve (Incluiding dismentling water tank and remove to store) complete all as specified.

Taking down 15mm dia bore galvanized steel water tubing and connections incluiding cleaning for refixing or removal to store complete all as specified.

S&F 15mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified.

Taking down 20mm dia bore galvanized steel water tubing and connections incluiding cleaning for refixing or removal to store complete all as specified & directed by the Engr-in-Charge.

S&F 20mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified & directed.

S&F in repairs 15 mm dia Bib taps, cast copper alloy Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S&F in repairs 15 mm dia Stop/angle valves, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F in repairs 15 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixe

S&F in repairs 15 mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F Stainless steel sinks with drainage board 1.0mm thick for kitchens or laboratory with plug, waste pipe, washers incluiding cantilever cast iron brackets, connecting unions to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified.

S&F plastic water closet seat, black, closed patteren with flat bottom, and cover and mild steel chromium plated or aluminised hanging device fixed in repair complete all as specified.

S&F in repairs vitreous china Wash down water closet pan (Pedestal pattern) incl Pedestal pan and trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe and Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as spd.

S&F in repairs vitreous china squatting pattern Orissa pattern Water closet, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor all as specified.

S&F PVC connection 15 mm size PTMT nuts of length 450 mm

S&F waste coupling 32 mm dia fixed in repair of CP (half or full threaded) (min wt 32 mm-45 gms)

S&F of vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing brackets, urinal pipe, grating and union for discharge pipe, pvc connection complete.

S&F in repairs for grating doom 125mm dia with waste hole of CP (min wt 40 gms) complete all as specified.

S&F in repair for soap dish any type fixed to plugs with chromium plated brass screw complete all as specified.

S&F in repairs for peg set (06 Nos Hook in each peg set) complete all as specified.

Dismantling of plain or corrugated steel sheeting any gauge any thickness incl Nainital or similar pattern coverings

S & F for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with L-type or J-type or cranked hook bolts and washer in roof, wall etc bent to curve complete all as specified.

S&F plain, 0.63mm thick galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-16

M&L for prepration of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel over a coat of red oxide primer complete all as specified.

M&L for preparation of newly plastered or un-plastered surfaces of walls, and applying two coats of cement based paint over a coat of white wash complete all as specified.

M&L for preparation of newly plastered or un-plastered surfaces of walls & applying two coats of distemper oil emulsion over a coat of chalk putty complete all as specified.

M&L for preparation of newly plastered ceiling sureface & applying three coats of white wash complete all as specified.

M&L preparation of new or previously untreated wood or wood based surfaces of any description, not otherwise described, over 10cm width or in girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed by Engr-in-charge complete all as specified.

S&F MS decorative powder coated rod for curtains, size 32 mm dia fixed in repairs complete all as specified.

S&F MS coloured powder coated phinal/end knobs fancy type suitable for curtain rod 32 mm dia fixed in repairs complete all as specified.

Supply only MS powder coated curtain Brackets suitable for 32mm dia pipe complete.

Stack clamps fixed in repairs out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 50mm dia CI vent pipes

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar all as specifed and directed.

M&L 100 mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

S&F cast iron floor trap 75mm with grating incl. jointing to waste pipe fixed in cement conc. Type B-1 (1:2:4) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings etc of any thickness below or above ground level including removal of rubbish from site all as directed by Engr-in-Charge.

M&L for 25mm thick PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) as in sub-floor etc complete all as specified and as directed by Engr-in-Charge

M&L for chequered cement concrete tiles 30cmx30cmx25mm thick made of grey cement pigment set and jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified

M&L for Preparation of old decorated plastered or unplastered surfaces of walls etc brooming down or steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading oil & greasy spots including concrete pilasters etc. preparing smooth surface with POP and applying two coat of white wash on walls complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of old decorated plastered or unplastered surfaces of ceiling etc brooming down or steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading oil & greasy spots etc.preparing smooth surface with POP and applying two coats of white wash on ceiling complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of old decorated plastered or unplastered surfaces of walls etc brooming down or steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading oil & greasy spots including concrete pilasters etc. preparing the disturbed surface by applying wall care putty, finishing the surface smooth with sand paper and applying one coat of oil bound distemper on walls complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of old decorated plastered or unplastered surfaces of walls etc brooming down or steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading oil & greasy spots including concrete pilasters etc. preparing the disturbed surface by applying wall care putty, finishing the surface smooth with sand paper and applying two coats of oil bound distemper on walls complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of old decorated plastered or unplastered surfaces of walls etc brooming down or steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading oil & greasy spots including concrete pilasters etc.preparing the disturbed surface by applying wall care putty, finishing the surface smooth with sand paper and applying one coat of cement base paint on walls complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered or unplastered surfaces of walls etc brooming down or steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading oil & greasy spots including concrete pilasters etc.preparing the disturbed surface by applying wall care putty, finishing the surface smooth with sand paper and applying two coats of cement base paint on walls complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted wood or wood based surfaces of any description not otherwise described,over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old treated surfaces of any description over 10cm widthor girth including staining the surface and applying one or more coat of synthetic varnish,complete all as specified & directed by Engr-in-Charge.

M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.

2mm thick prefex sheet, glazing fixed with oil putty or with beads, ISI marked including hacking out old sheets complete all as specified and directed by Engr-in-Charge

Taking down carefully copper/Aluminium point wiring (Light,fan,socket or power) complete including fitting such as switches,socket,bell pushes, ceiling roses,pendants/batten holder,call bell,regulators etc all as specified and directed by Engr-in-charge.

M&L for point wiring for one light/Fan/bell point controlled by one switch one way in & including PVC conduit or casing and capping as per site requirement using FRLS PVC unsheathed multistrand copper conductor cable 1.5 sqmm single core including 3 mm thick plastic laminated sheet cover over PVC / wooden Box and for earth continuity insulated PVC unsheathed(green colour) 1.5 sqmm copper earth wire connected to common earth dolly and making good the disturbed surfaces to match with existing complete all as specified and as directed by Engr-in-charge. Note : (a) wiring shall be done by using proper colour coding. Make of wire : Polycab/Finolex/Havells

All as per ser item No 87 here-in-above but for 5 Amp independent socket outlet

All as per srl item No 87 above but 5 Amp on same board

All as per ser item No 87 here-in-above but for 15 Amp independent socket outlet using 2.5 sqmm single core wire.

Supply and fix Switch piano, flush type 5 Amps One Way 230 volts

Supply and fix Bell push, flush type 5 Amps One Way 230 volts

Supply and fix Socket outlet 2-in-1 3 pin 5 & 15 Amps flush type 230 volts

Supply and fix Socket outlet 2-in-1 3 pin 5 Amps flush type 230 volts

Supply and fix Switch one way 15 Amps flush type 230 volts

Supply and fix Switch socket combination 15 Amps 5 pin multipurpose one way flush type 230 volts

Supply and fix Switch socket combination 2-in-1, 3 pin, 5Amps flush type 230 volts

Supply and fix Switch Socket Combination with box 15 Amps flush type 230 volts.

Supply and fix Bell ding dong AC SP 230 volts. Make Anchor/SSK/Cona

Supply and fix Holder insulated body with back plate for LED lamp.

M&L for Sub main wiring complete with FRLS PVC insulated unsheathed stranded copper conductor wire 4.0 Sq mm 02 Nos. (for Phase & Neutal) along with earth wire FRLS PVC insulated unsheathed stranded copper conductor wire of size 2.5 sq mm wire drawn through in & including PVC casing caping or PVC conduit as required on site complete all as directed by Engr-Incharge.

Supply and fix MCB SPN 32Amps 240 V -10ka all as specified and as directed by Engineer-in-charge.

Supply and fix MCB SP 5 to 32 Amps - 10KA 240 Volts all as specified and as directed by Engineer-in-charge.

Supply and fix MCB TPN 63 Amps - 10KA 430 Volts all as specified and as directed by Engineer-in-charge.

S&F sheet metal enclosure double door for DB's SPN 8 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-Incharge. Make : Havells/Standard/L&T/Schnider or equivalent

All as per Item 105 here-in-before but 4 way.

S&F sheet metal enclosure double door for DB's TPN 4 way 415 V having 200 A rated bus bar complete all as specified and directed by Engr-Incharge. Make : Havells/Standard/L&T/Schnider or equivalent

Supply and fix regal batten for LED tube of 20/18W universal batten for T5 and T8 lamps (4 ft.) wall mounted with LED tube with driver complete with accessories internally pre wired and including connecting up with twin core twisted copper conductor cable with suitable size completet all as per specified & as directed by Engineer-in-charge.

S & F LED Adore Lamp 14/15W, B22 base 6500K CDL type. Make : Crompton/Bajaj/Philips

All as per srl Item No. 109 above but 9/10W

S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with 20 Amps SPN MCB complete.

Supply only aluminium thimbles of size 35 sqmm to 70 sqmm

Supply and lay in replacement of XLPE cable of size 16 Sqmm 4 core, 1100 volt grade, insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor. Make : Havells/Gloster/Polycab

Supply & replace 400 A 4 Pole MCCB, 35 KA including necessary cable lugs & wire etc complete. Make Havells/L&T/Standard/C&S or equivalent

All as per Item 114 here-in-befor but 250 A 4 pole MCCB, 35 KA

All as per Item 114 here-in-befor but 100 A 4 pole MCCB, 25 KA

All as per Item 114 here-in-befor but 63 A 4 pole MCCB, 16 KA

Supply & replace 400A onload changeover, 4 pole including providing necessary cable lugs of adequate size & dressing of cable as required all as specified and directed. Make havells/L&T/C&S/Standard

Supply and fixing in replacement of LED outdoor driver suitable for LED street light fitting of 60 / 70 watt including taking down the LED fitting and refixing the same in its original position complete all as directed . Make : Havells/Crompton/Bajaj/Philips

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galavanised earth strip 32x6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5, connected to earthing test point all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20 mm dia GI medium grade pipe for earth lead protection, 20mm dia GI medium grade pipe for watering , water funnel, testing point etc, complete all as specified and testing on completion.

S & F in replacement of Gun-metal, globe or gate valves, 25mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), complete all as specified & directed by Engr-in-Charge.

All as per Item 121 here-in-befor but 40mm dia

All as per Item 121 here-in-befor but 50mm dia

Taking down old unsv steel water tubing, Supply and fixing in replacement steel water tubing of size 25 mm dia medium grade galvanised ( ISI marked) with all fittings( such as bends elbows, Tee, short pieces, connectors back nuts, diminishing pieces, caps and plug, unions etc) all as specified.

All as per Item 124 here-in-befor but 40mm dia

All as per Item 124 here-in-befor but 50mm dia

Supply only insulation tape, best quality (30 rolls in a box).

Supply and fix in repair GI elbow of 25mm dia complete all as specified and as directed

All as per Item 128 here-in-befor but 40mm dia

All as per Item 128 here-in-befor but 50mm dia

Supply and fix in repair GI Tee 25mm dia complete all as specified and as directed

All as per Item 131 here-in-befor but 40mm dia

All as per Item 131 here-in-befor but 50mm dia

Supply and fix in repair GI Socket 25mm dia complete all as specified and as directed

All as per Item 134 here-in-befor but 40mm dia

All as per Item 134 here-in-befor but 50mm dia

Supply and fix in repair GI Union 25mm dia complete all as specified and as directed

All as per Item 137 here-in-befor but 40mm dia

All as per Item 137 here-in-befor but 50mm dia

Supply and fix in repair GI Nipple 25mm dia complete all as specified and as directed

All as per Item 140 here-in-befor but 40mm dia

All as per Item 140 here-in-befor but 50mm dia

Note : Schedule of credit for Rs. 26,008.00 (Rupees Twenty six thousand eight only) to be deducted on acceptances of bid.

M/S LIBE & CO