Comprehensive Maintenance of Fire Alarm System under GE ND Visakhapatnam

Amount

The Fire Alarm System / Detection System/ Internal Fire Hydrant System [Total 32 Nos. of Systems] shall comprise following mentioned control panels, Battery Chargers and allied components : [a] Microprocessor based Addressable Networking type Fire Alarm / Detection Control Panel Supply Unit, Heavy Duty Battery Charger and Allied Components – 48 Nos [b] Microprocessor based Addressable Networking type Fire Alarm / Detection Repeater Panel Supply Unit, Heavy Duty Battery Charger and Allied Components – 06 Nos [c] Microprocessor based Conventional type Fire Alarm / Detection Control Panel with Supply Unit, Heavy Duty Battery Charger and Allied Components – 35 Nos [d] Microprocessor based Conventional type Fire Alarm / Detection Repeater Panel with Supply Unit Heavy Duty Battery Charger – 02 Nos [e] Microprocessor based Networking type Fire Alarm Control / Detection and CO2 Gas Release Panel with Supply Unit, Heavy Duty Battery Charger and Allied Components – 04 Sets [f] Fire Hydrant Panel with Allied Components – 18 Nos.

Notes for Serial Item No. 1: [a] The Comprehensive Maintenance and Repairs of Microprocessor Addressable / Microprocessor Conventional type Fire Alarm System / Fire Detection System shall be carried out by Senior Technician / Senior Mechanic [Certificate holders from recognised ITI / NCT / VT in the Electrician / Fitter trade with 5 Years of relevant experience] under the guidance of the Service Engineer of the OEM for efficient operation of Fire Alarm / Fire Detection System. [b] Contractor shall provide all Spare Parts / Accessories etc. and the rate quoted is deemed to be inclusive of supply and fixing of all Major and Minor Spares viz. Mechanical / Electrical / Electronic / LED lights etc. including Cables, SCR / IGBTs / High Pressure Braided Hoses of compatible make as specified by the OEM except Spares catered vide Serial Item No. 2 to 29 of BoQ as and when required for trouble free and smooth / efficient operation of Fire Alarm / Fire Detection System complete all as directed by the Engineer-in-Charge. All the safety measures shall be ensured for serviceable condition round the clock and cost of their spares, batteries etc. shall be deemed to be included in the rate quoted. Nothing extra shall be paid extra on these accounts. Spares catered vide Serial Item No. 2 to 29 of BoQ shall be measured and paid separately as "Supply Only" wherever required and rate quoted for Serial Item No. 1 of BoQ shall be excluding the same. However, replacing, fixing, repairs and testing shall be deemed to be included in the rate quoted.

[c] The contractor shall carry out the Periodic Checks of the entire systems fortnightly in presence of user and concerned JE E/M i.e. Inspect the functionality of each system components like Smoke Detector, Sprinklers, valves, pipe lines, pumps, Manual Call Point, Beam Detector, Sounder Cum Strobe, Isolator Module, Response Indicator, Battery, Battery Charger, UV Flame Detector and other components etc. of Each Fire Alarm Panel / System and its components. Necessary Report for each Fire Alarm / Fire Detection System/ Fire Hydrant System shall be submitted to GE duly signed by the Senior Technician / Mechanic, JE, Engineer-in-Charge and User representative. [d] Complete servicing of Directional Valves, CO2 Nozzles, CO2 Cylinder Valves checking and refilling / topping up of the CO2 in the existing CO2 Fire Fighting Cylinders of 69 Litres of water capacity @ 45 KG per Cylinder complete all as specified and as directed. CO2 will be measured and paid separately as supply only under relevant items of this BoQ. However, Rate quoted is deemed to be including the cost dismantling, transportation and hydro testing of the cylinders by CCE approved gas filling agency. [e] High Pressure Braided Hoses shall be checked and replaced if found defective complete all as directed by Engineer-in-Charge.

[f] The rate quoted shall be deemed to be inclusive of testing of each Fire Alarm / Fire Detection System once in Fortnight for worthiness of the Fire Alarm / Fire Detection Systems /Fire Hydrant Systems with the qualified Service Engineer in presence of user, Engineer-in-Charge and concerned JE E/M. The Service Engineer shall have minimum experience of 5 Years in the relevant field. Necessary Test Report for each Fire Alarm / Fire Detection System /Fire Hydrant System shall be submitted to GE duly signed by the Authorised Service Engineer, JE, Engineer-in-Charge and User representative. The contractor shall be solely responsible for efficient functioning of all the Panels / Systems during the entire contract period. Contractor shall provide necessary Testing Kit, Tools and Equipments at his own expense. [g] Emergency Light and necessary tools shall be available in a tool box in the shift for smooth functioning of Fire Alarm System. [h] Conveyance and communication system like mobile phone etc. shall be provided by the contractor to all Mechanics and Helpers. [i] The contractor shall abide by the latest Labour Rules and Minimum Wages Act. [j] Wages paid by the contractor to the persons employed shall not be less than the minimum wages fixed by State / Central Government from time to time whichever is higher. The contractor shall also insure the workmen employed on the job. [k] The contractor is responsible for Insurance, EPF, ESI, Gratuity, Bonus, Labour Welfare Cess etc., as applicable and shall be paid to the Workmen as per existing Labour Rules / Acts / Regulations and rate quoted shall be deemed to be included for the same. [l] INSURANCE AND DRESS CODE: The contractor shall provide the workmen with Dark Blue Colour Uniform [Formal Pant & T-Shirt] with labels showing / printed i.e. "Name of the Firm and Designation" on Front and "GE [ND] [V]" on the back of the T-Shirt along with protective clothing / gear. The contractor shall also provide shoes to the workers and the persons shall not be allowed to enter the work site without wearing shoes.

[m] The contractor shall be responsible for all Accidents / Injuries happening to the workmen. Any accident causing Minor / Fatal Injury, Partial Disability due to any untoward incident or non-adherence to Safety and IE Regulations or fault in maintaining of Fire Alarm / Fire Detection Systems or on account of any mishandling / wrong operation / lack of knowledge of safety precautions or on account of any circumstances beyond his/their control, the contractor shall be solely responsible for settling all claims of compensation to the deceased, failing which department will have a right to recover any sum indicated / claimed by Labour Commissioner / Court authorities. No claim whatsoever will be entertained in this regard. No compensation is payable by the department on this account. Contractor shall provide first aid boxes to meet any emergency situations.

[n] The contractor shall carryout the comprehensive maintenance of the Fire Alarm / Fire Detection Systems /Fire Hydrant Systems catered under subject work through the Original Equipment Manufacturer of the Fire Alarm / Fire Detection Systems / Fire Hydrant Systems or from their accredited / authorised agencies only. The lowest bidder shall submit MoU from the Original Equipment Manufacturer of the Fire Alarm / Fire Detection Systems /Fire Hydrant Systems or from their accredited / authorised agencies to provide technical support, trained persons for maintenance & testing and spares before commencement of the work to GE. The spares shall be of the make as per existing or as per the OEM.

Supply Only Microprocessor based Addressable Networking type Fire Alarm Control Panel of two loop with supply unit Heavy Duty Battery Charger and also with complete set up of LCD Display, Mother Board, Cables, Battery, Charger all the spares etc., and testing and commissioning complete all as specified and as directed. Make: Spencer Fire / Notifier / Honeywell / Ravel

Supply Only Microprocessor based Addressable Networking type Fire Alarm Control Panel of four loop with supply unit Heavy Duty Battery Charger and also with complete set up of LCD Display, Mother Board, Cables, Battery, Charger all the spares etc., and testing and commissioning complete all as specified and as directed.

Supply only Addressable Networking type Fire Alarm Repeater Panel of Ravel / Spencer / Vertex / Siemens make, with supply unit heavy duty Battery Charger and also with complete set up of LCD Display, Cables, Battery, Charger, all the spares etc., and testing and commissioning complete all as specified and as directed.

Supply only Microprocessor based Conventional type Fire Alarm Control Panel of Ravel / Spencer / Vertex make, with supply unit Heavy Duty Battery Charger and also with complete set up of LCD display, cables, battery , charger, all the spares etc., and testing and commissioning complete all as specified and as directed.

Supply only Microprocessor conventional Network type Fire Alarm Repeater Panel of Ravel / Spencer / Vertex / Siemens make with supply unit Heavy Duty Battery Charger and including complete setup of LCD Display, Cables, Battery, Charger, all the spares etc. tested and proved functionally complete all as specified and as directed.

Supply only Batteries [12V, 07AH ] with terminals and connections complete all as specified and as directed.

Supply only Batteries [12V, 12AH] with terminals and connections complete all as specified and as directed.

Supply only Detectors complying with and type certified to EN – 45, Analog type, Multi-Sensor Detector with Heat and Smoke combination and installation, testing and commissioning complete all as specified and as directed.

Supply only UL listed Analouge addressable smoke detector with 8 digit dip switches for (1 to 254) address setting , dual LED indication for 360 degree visiblity, milky white in colour, shall be polarity insensitive, insect filter chamber, easy to install, advance detection and communication prococal and installation, testing and commissioning complete all as specified and as directed.

Supply only Manual Call Point Resettable type complete all as specified and as directed.

Supply only Glass Chamber for accommodating Manual Call Points complete all as specified and as directed.

Supply only Electronic Hooters [Buzzers / Alarm Sounders] complete all as specified and as directed.

Supply only CO2 Gas for filling in the existing CO2 Fire Fighting Cylinders complete all as specified and as directed.

Supply only PVC insulated and sheathed Multistranded, Copper Conductor, industrial cable, 1100 Volt, conforming to IS 694 of size 2 X 1.5 Sq.mm with clamps for fixing on cable tray, fixed to walls, laid in trenches / on ground with all accessories as required complete all as specified and as directed. Note: Excavation and Earthwork, Cable Protection Pipes wherever required will be measured and paid saperately under respective items of this Schedule.

Supply only Addressable Short Circuit Isolator [Fault Isolation Module] suitable for DIN Rail mounting and mounted external device shall display status of Tri-Colour with Open, Short Circuit LED Status Indication for Normal and the Device shall be suitable for Loop connectivity complete all as specified and as directed. The FIM shall be considered for every 20/22 devices as the site condition UL / FM/ CE/ LPCB certified complete all as specified and directed.

Supply only Addressable Control Module complete all as specified and as directed.

Supply only of Microprocessor based Fixed Temperature cum R.O.R GR. 1 type Heat Detector including fixing on Metal Junction of size 75x75x50 mm with Metal Glands and Gasket, UL / FM / CE / LPCB certified complete all as specified and directed.

Supply only Electronic wall mounted time delay Voltage stabilizer of 2 KVA Capacity, Automatic Operation, for input variation of 170 Volts to 250 Volts with stabilised voltage of 230 Volts with accuracy of ± 2.5% complete all as specified and as directed

Supply only DOL Starter, 415 Volts, AC, 50 Hz, suitable for Motors of Capacity 7.5 HP, in Sheet Steel Enclosure and connecting up complete all as specified and as directed.

Supply only Sluice Valve, Cast Iron body, Stainless Steel Spindle, Gun Metal Rings including Wheel for operation, Flanged and Drilled, 100 mm Dia, conforming to IS – 14846, Class PN –1.6, Long Body type including all Joints with Rubber Gasket and Jointing Materials, Bolts, Nuts, Washer complete all as specified and as directed.

Supply only Butterfly Valve, 80mm Bore, Class PN-1.6, Flanged and Drilled, Conforming to IS - 13095, Cast Iron Body, SGI [Nylon Coating] Disc, SS AISI 304 Disc Seal, CS Clamping Ring, SS AISI 410 Shaft with Hand Lever operated for manual operation including all Joints with Rubber Gasket and Jointing Materials, Bolts, Nuts, Washer complete all as specified and as directed.

Supply only Hose Reel not less than 20 mm bore and 30 m long as per IS – 884 complete with Gun Metal Nozzle including complete all as specified and as directed.

Supply only 63mm dia 15 metre long CP (Controlled Percolating) Fire Hose conforming to IS – 8423 complete with Male and Female Coupling conforming to IS – 903 including all Joints and Jointing Materials complete all as specified and as directed.

Supply only bulb type Gum Metal sprinkler head pendant type set to operate at 68 degree celcius conforming to IS – 15105 including all Joints and Jointing Materials complete all as specified and as directed.

Supply only Sprinkler glass bulb type (Standard response ) set to operate at 68 degree celcius temparature rating side wall type conforming to IS – 15106 / TAC complete all as specified and as directed.

Supply only Fire Alarm Sounders / Sirens Electronic type horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 DB to 120 DB measured at 1.5 Mtr with sound output variation of + 5 DB with a range of 1000 metres complete all as specified and as directed.

Supply only Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 50 mm bore with iron wheel head, screwed both ends for iron pipe, confirming to IS, ISI Marked complete all specified and as directed.

Supply only Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 25 mm bore with iron wheel head, screwed both ends for iron pipe, confirming to IS, ISI Marked complete all specified and as directed.

S & F in repair MS ERW Pipe, 80 mm bore, Heavy Grade, conforming to IS – 1239 including all fittings as in Riser and Sprinkler or laid in floors or fixed to walls and ceilings duly painted with two coats of synthetic enemal paint over one coat of zinc chrome primer including testing complete all as specified and as directed.

S & F in repair MS ERW Pipe, 40 mm bore, Heavy Grade, conforming to IS – 1239 including all fittings as in Riser and Sprinkler or laid in floors or fixed to walls and ceilings duly painted with two coats of synthetic enemal paint over one coat of zinc chrome primer including testing complete all as specified and as directed.

S & F Double Headed Fire Hydrant Landing Valve of Type B of size 63 mm dia conforming to IS – 5290 including all Joints and Jointing Materials complete including taking down existing Fire Hydrant of any description complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Soft / Loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.

Removal of excavated material [Soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M & L for 20mm bore dia High Density Polyethylene Pipes [HDPE] of pressure rating 6 KGf / Sq.cm laid in trenches or fixed to walls or laid in floors etc. complete all as specified

Supplying and laying GI pipe, 25mm dia, light grade for earthing lead protection etc. or fixing on wall / poles or laid in trenches / floors of any type, secured with clamps complete all as specified and as directed.

S & F Fire Hose Box / Cabinet made of 16 gauge MS Sheet 800mm X 600mm X 250mm with Double Door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red outside and brilliant white inside fixed to wall and suitable for fixing Two Hose Reel of 15 m long complete including taking down existing Fire Hose Box of any description complete all as specified and as directed.

M & L for carrying out repairs to MS Sheet fire hose box of size 800mm X 600mm X 250mm installed at any location by replacement of broken glass with new 4mm thick plain glass of suitable size and derusting, cleaning, denting, welding as required including preparation of all surfaces and painting with two coats of synthetic enemal paint over one coat of red oxide primer complete all as specified and as directed.

M & L for Point Wiring complete with 1100 Volts, FRLS Grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 drawn through and including heavy duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type and Modular Type Pressed Metal Flush Box made out of 2mm thick MS Sheet of suitable size and including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for16 amps Power Point controlled by 16 Amps One Switch including taking down existing unserviceable point wiring of any description complete all as specified.

S & F in repair Socket Outlet, 3 pin, 16 Amps and 1 pin, 5 Amps, Modular Type, Two Modules, Multipurpose, 230 Volts complete all as specified and as directed.

S & F in repair Switch Modular type, one module, Single pole, one way, 16 Amps, 230 Volts complete all as specified and as directed.

M & L for Rewinding of fire booster pump Motor of capacity upto 7.5 HP Capacity using super enamelled copper conductor of suitable gauge including insulation, varnishing, packing and testing etc., cleaning, greasing etc. and testing including replacement of nuts and bolts for foundation etc. complete all as specified and as directed.

S & F in repair Heavy duty PVC Conduit, 20 mm dia concealed in Walls / Roofs / Floors / Ceiling etc. inclusive of boxes [Junction / Terminal but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified

MVV Prasad

B5BUILDING SOLUTIONS

SAI KRISHNA ASSOCIATES