Special repair to road and allied services at Mil Stn Dharamshala

Amount

M & L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm, exc 50 mm and not exc 100 mm deep & removing not exc 50 metres and tacking, complete all as specified and directed by Engr-in-Charge.

M&L for 100 mm thick cement concrete type C-2 (1:4:8) using 40mm graded aggregate crushed stone aggregate as in subbase, complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less, complete all as specified and directed by Engr-in-Charge.

Forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' for 100 mm thick pavement, complete all as specified and directed by Engr-in-Charge.

Forming contraction (Dummy ) joints 65 mm deep X 10mm wide filled with sealing compound grade A, complete all as specified and directed by Engr-in-Charge.

M & L for preparing existing black top bituminious surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with air compressor through air jet to remove all loose dirt and applying evenly a tack coat of bituminous primer using paving bitumen VG-10 at the rate of 5 Kg per 10 Sqm of road surface by sprayer operated hot pressure mechanism, providing, laying and spreading 40mm thick (consolidated thickness) of semidense ashphaltic bituminous concrete pre mixed carpet with design mix formula with 5.5% bitumen binder content by weight of total mix including heating bitumen to the required temperature, mixing bituminous concrete in automatic temperature controlled hot mixing plant, laying spreading uniformly by means of mechanical paver and rolling and consolidating to the required gradient and camber with 8 to 12 tonnes power road roller to a uniform smooth surfaces, complete all as specified and directed by Engr-in-Charge.

Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using with paving bitumen of any penetration of binder at 4% by weight of total mix, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B-1, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd as per manufactures instructions etc, complete all as specified and directed by Engr-in-Charge.

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like not exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction, complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness unreinforced (below or abv ground level), complete all as specified and directed by Engr-in-Charge.

Demolition of stone/boulder masonry built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings dressed stone work and precast concrete articles, complete all as specified and directed by Engr-in-Charge.

Cement Conrete 1:3:6 (Nominal Mix) using 40mm graded crushed stone aggregate in foundation filling and mass conrete, complete all as specified and directed by Engr-in-Charge.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:4 brought upto courses, complete all as specified and directed by Engr-in-Charge.

TMT bar 10mm dia and over, cutt length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr-in-Charge.

RCC M-20 nominal mix using 20 mm graded agg as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, complete all as specified and directed by Engr-in-Charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed by Engr-in-Charge.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, complete all as specified and directed by Engr-in-Charge.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed by Engr-in-Charge.

M&L for dismantling stone laid dry as in soling of any description or thickness, complete all as specified and directed by Engr-in-Charge.

surinder kumar jindal & bros.

M/S JUGAL KISHORE AND COMPANY