WBIW/CTU/CE(S)/e-NIT- 02 (e)/2026-27 SL 01

Supplying Jhaw / Eucalyptus bullah piles at work site, including dressing and making one end pointed. A) 15 cm av. Diameter. Note: Diameter of pile to be measured at a distance of 1.5m from the thicker end.

Labour for driving Jhaw / Eucalyptus bullah piles by monkey in all sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. A) 15 cm av. Diameter. Note: Payment to be made on the length driven into the ground. Diameter to be measured at 1.5m. from the thicker end.

Supplying, fitting and fixing with iron nails half split bullah wailing pieces and cross pieces etc. complete with cost of all materials and carriage to site. A) Width of thinner end above 10 cm.and less than 15 cm i) Jhaw / Eucalyptus.

Making sausages circular in section (any length) made with 1st class kiln burnt / 1st class picked jhama full bricks rolled inside wire net caging made of 10 S.W.G. galvanised iron wire square pattern (internal dimension of mesh will be 100 mm. x 100 mm. square) galvanised wirenet caging with proper lapping of minimum 150 mm and sewing with 12 SWG. galvanised iron wire including cost of all materials, carriage up to site, placing and laying the same after preparing the bed/trench to proper slope etc. complete as per direction of the Engineer-in-charge. (cost is excluding the cost of end pieces .) A) 1.00 metre diameter.

Supplying, fitting, fixing end pieces for rectangular / square / circular sausages at the ends, with 10 SWG / 8 SWG G I wire net of different mesh sizes tying & sewing the same maintaning a lap langth of 150 mm all around with 12 SWG G I wire complete, including the cost of supply of wire netting,fitting etc, complete as per direction of the Engineer- in - charge. A) Mesh size 100 mm x 100 mm with 10 SWG wire.

Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. A) pakur variety. [Cement : PSC / PPC/OPC 33]

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size)excluding shuttering and reinforcement, if any, inground floor as per relevant IS codes. a) Pakur Variety Grade of cement (PPC/PSC/OPC 33). A) Using concrete mixer.

Supplying, fitting and placing HYSD bar reinforcement in Sub-structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading,carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge. A) Steel materials Tor Steel rods / HYSD bars / TMT bars. (JSW/JSPL / Shyam / SRMB/SSL/ BMASL / Electrosteel) (Fe 415 /Fe 500 /Fe 500D, conforms to lS: 1786)

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). A) 25 mm to 30 mm shuttering without staging in foundation

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches