Construction of Interlocking tiles and Nali in shiv mandir to main road at Panchyat Shahjahanpur

Construction of embankment with approved materials obtained from borrow pits with a lift up to 1.50m,transporting to site,spreading greading to required slop and compacting to meet requirment of table-300.1 and 300.2 with a lead up to 1.0 km. As per TSC.301.5

L/o granular sub base by providing well greaded materials speading in uniform layers with motor greader / Tractor mounted appropriate equipment complete in all respects.

Providing Laying spreading and compecting stone aggregate of specific sizes 22.4 to 53 mm to WBM specification i/c spreading in uniform thick. Layer use crushable scrining to fill up the interstics of coarse aggregate watering & compacting in stages to get required density by 80-100KN three wheel static rollar as per T.S.C-405

Construction of information pillar in B/W with 1:4 cement & C.sand mix mortar 1.20m wide ,1.35 high i/c grenite stone (2*3 ft) size also include printing of latters finished with plaster complete .

Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead up to 50 m as per Technical Specification Clause 302.3

Concrete with 4cm Guage brick ballast fine sand of 1.25F:M and cement in proportion of 1:6:12 in foundation and under floors including supply of all meterials labour and T&P etc requied for proper completion of work S.I NO 273

Providing supply and fixing of 80mm thick ruber moulded vibratory Interlocking tiles by high pressure and controlled vibration machine having plain dimension 200 X (160+120mm)with minimum 5mm thick topping of O.P cement mixed with 25% marble powder the compressive strength of concrete paver blocks shall not be less than 300 mpa and 4.5 kg/ton including levelling and dressing filling joints with local sand over G.S.B and also including cost of all materials. Labour excluding cost of G.S.B and T&P etc requred for proper completion of work as per direction of engineer-in charge, and T& P ete. [as per MORD 1500]

R,C.C work in 1:2:4 (M-20) in cement coarse sand, and 20mm guage stone grit In lintels of door,window and sunshed excluding rienforcement and bending including all material, labour and T&P etc all completion of the work . [ 11.40 /Mord 800 & 1200]

Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work including bending for proper completion of work including all material, labour and T&P etc all completion of the work . [ Mord 1000]