Addition & alteration to Adarsh Jan Seva Kendra Pardi in Taluka Seva Sadan building @ Pardi Ta. Pardi Dist. Valsad

Name of work :-

Addition & alteration to Adarsh Jan Seva Kendra Pardi in Taluka Seva Sadan building @ Pardi, Ta. Pardi, Dist.

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

Item of work In figure

1 Dismentaling tiled of stone floors laid in mortar including stacking of 180.00 SqM 48.21

serviceable materilas and disposal of unserviceable materials with all lead

2 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 26.00 No. 251.34

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(ii) Exceeding 3 Sq.M.

3 Providing & fixing Door having colour anodised standard Aluminium 13.50 SqM 4625.80

sections of 44.50 x 101.6 x 1.65 mm size having Single shutters of

factory made and stamped IS 12823 grade-I Type-1 35 mm thicm solid

core melamine faced three layred rsin flush door fixed with SS hinges

having dacoratived lamination on both side including 4 mm thick glass on

top havaing 30 cm long stainless steelpipe handle on both side with SS

fixtures & fastenings as directed by Achitech etc complete

4 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) 180.00 SqM 1397.83

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc. complete for DARK shade

5 P & L vitrified tiles 8 to 10 mm thick, 24" x 24" in skirting risers of steps 10.00 SqM 1141.45

and dedo on 10 mm thick cement plaster 1:3 ( 1 cement: 3 coarse sand)

and jointed with white cement slurry

6 Providing and laying machine cut machine polished Granite stone 62.00 SqM 1896.78

treads and risers in Single piece Max length with 1cm projecting, nozing

rounded moulding in tread laid over 12 mm (avg.) thick bases of cement

mortar 1:6 (1-cement : 6-coarse sand) jointed with grey or colour

cement slurry including rubbing and polishing incl. making Three No.s of

grooves of size 3mm X 3mm along the length of treads etc. complete

7 Modular Partition 61.00 SqM 4393.50

Providing & Fixing Modular Partition full or low with 1.35 Mt. or more

with wide frame structure of alluminium extruded alloy section with all

section powder coated (50 micron) having overall partition thickness

mm (double skin of 9 mm MDF interior grade with imported quality

to 1.0 mm thk post form laminated on both side) flush on both side with

no screening or gluing visible where necessary 4 mm to 5 mm th. frosted

design glass of 300 mm high as per design and as directed including

rubber gasket and beading clips for glazing paneling and cleat angle, with

expansion hold fasteners including necessary filling up of gaps at

junctions including all required materials labour and equipments as per

Drawing & image , etc. complete

Electrification Details :

Providing & Fixing partition with provision for drawing cable concealed

type for electricity supply with material viz. 1) 6A One Way Switches, 2)

6A Pin Socket (MK Make), 3) LAN Cable Socket (CAT 6 Computer Jack) 4)

Telephone Jack (RJ 11), 5) 1.50 Sq. mm. Cable (Anchor, Finolex make), 6)

Telephone Cable (Delton make) for computers, printer, telephone,

internet wires etc. complete, as per drawing & image and directed by the

Architect and approved by the Engineer in Charge.

8 Aluminium Partition 114.00 SqM 3812.75

Providing & Fixing Color Anodized Alluminium Partition partly paneled,

partly glazed, partly alluminium grill using alluminium standard section of

frame size 63.50 X 38.10 X 1.95 mm of (Jindal section no: 20073, @ wt.

1.092 Kg/Rmt) Partly glazed 5mm th. Modi guard glass and partly fixed

with 12mm thick exterior grade both side prelaminated sheet and

mm thick alluminium grill including rubber gasket and beading clips for

glazing paneling and cleat angle, with alluminium door of section

47.62mm x 44.45mm x 3.00mm style and top rail, 83.50mm x 44.45mm x

3.00mm bottom rail and 150mm x 44.45 x 2.65 lock rail with 12mm thick

exterior grade pre-laminated particle board, 5mm thick glass of

approved make with all accessories, look, hinges, handle, door closer, etc.

complete with expansion hold fasteners including necessary filling up of

gaps at junctions including all required materials labour and equipments

as per detailed drawing as directed by the Architect and approved by the

Engineer in Charge as per image.

9 Glass Partition 17.00 SqM 5555.00

Providing & Fixing Toughed Glass Partation with Glass 12mm thick

exterior grade pre-laminated particle board, 5mm thick glass of

approved make with all accessories, look etc complete with expansion

hold fasteners including necessary filling up of gaps at junctions including

all required materials labour and equipments as per detailed drawing as

directed by the Architect and approved by the Engineer in Charge as per

10 Removing dry or oil bound distemper on ceilings by a washing and 833.00 SqM 12.90

scraping and sand papering the wall surface smooth including necessary

repairs to scratches complete.

11 Providing 15 mm thick cement plaster (Mala trowel finish) in single coat 131.00 SqM 260.81

on brick / concrete wall for interior plastering finished even and smooth (

i ) Cement mortar 1:3 ( 1-cement , Including two coats of Lapi putty and

two coat of primer etc complete

12 Wall painting (Three coats) with plastic emulsion paint of approved brand 770.00 SqM 80.35

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

13 Wall painting (Three coats) with plastic emulsion paint of approved brand 539.00 SqM 85.76

and manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

14 Painting two coats (including priming coat) on new steel and other metal 47.00 SqM 122.49

surfaces with enamel paint, brushing interior to give an even shade

including cleaning the surface of all dirt, dust and other foreign matter

15 Finishing wall with exterior acrylic emulsion paint on wall surface to give 1288.00 SqM 114.53

an required shape even shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered materials.etc complete

16 Providing & Supplying Curtain of Roller blinds with roller thread, with 42.00 SqM 3939.00

superior quality Vista make material & mechanism with necessary

fittings, fixtures and fastening etc. complete as per approved and as

directed by the Architect and approved by the Engineer in Charge.

17 Providing and fixing partly panneled and partly glazed powder coated 46.00 SqM 2183.62

colour aluminium single cabin door with frame of shuter having size

47.62 x 44.45 x 1.18 mm wt / mt 0.667 /rmtfor vertical styles and 47.62 x

44.45 x 1.00 mm wt per mt 0.536 per mt for top and bottom and middle

secton of size 83.50 x 44.45 x 1.54 st per mt = 1.139 kg/mt including

glazeing clits of size 19 x 17.3 x 1.27 wt per mt = 0.213 per rmt including

rubber glaket, 5mm thick tinted float glass and 12 mm thick both side

laminated partical board with necessary colour aluminium fixtrues

fasteneing and door closer etc complete as detail as directed

18 Pro. And fixing single layer water proof gypsum board 12.5 mm thick 206.00 SqM 606.95

sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm

suspended by GI suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm

center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at

mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x

mm at edges & drops incl.paper tap sand sofit cleat, anchor fastener,

scoch bolt connecting cleat,joining compound top coat on ceiling

incl.making necy.opening for light fitting,diffuser etc. comp. as per detail

drawing as directed.

19 Acrylic Signages 60.00 No. 297.95

Providing and Fixing Signages (Acrylic Name Plates) having size of 305 X

100 X 5 mm thick displaying Names of Offices having fonts, colour as per

image and directed by the Architect and approved by the Engineer in

20 Providing & Fixing File Storage Rack size 0.30 mt Depth. made out by 23.00 SqM 3989.50

M.S. Angel 40 x 40 x 4 mm @ Wt 2.4 kg.per meter with 7 partition

shelves M.S. Sheet 3.15 mm thick wt. 24.70 kg per sqm including applying

a priming coat of red lead paint and labours materials. as directed by

Engineer in charge.

21 Providing and fixing in position callapsible steel shutters with vertical 16.00 Quint 5785.56

channels 20 x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm size

with top and bottom rails of T_rin 40x 40 x 6 mm with 38mm dia, steel

pulleys complete with bolts, nuts, locking arrangements, stoppers

handles including applying a priming coat of read lead paint.

22 Modular Side Rack Providing & Installing Modular Side storage rack of 10.00 No. 12756.30

size 1200/900 X 450 X 710 mm ht., made out of 18mm thk MDF top with

0.8 mm thk post formed laminate, 18 mm thk MDF side supports, drawer

doors, sliding doors, 12mm MDF Shelf, rear support, all finished in 0.8 to

1.0mm thk post formed laminate, with necessary support buttons, all

proper with Enox make sliding channels, S. S. Handles, ball catches, of

approved make etc. complete with proper sliding mechanism as per

detail drawing & image and as directed by the Architect and approved by

the Engineer in Charge.

23 Modular Back Side Storage Rack Providing & Installing Modular Storage 12.48 SqM 9413.20

rack of size 1500 / 1200 X 450 X 710 mm ht., made out of 18mm MDF

openable doors, side/bottom supports, 12mm MDF in shelf & rear

support, all finished in 0.8 to 1.0mm thk post formed laminate, with

necessary support buttons, all proper with Enox make S. S. auto hinges, S.

S. Handles, S. S. Tower bolts, ball catches, Godrej make lock etc. complete

as per detail drawing & image and as directed by the Architect and

approved by the Engineer in Charge.

24 Providing & Fixing Handicap Accessible Bathroom Sign or Washroom Sign 10.00 No. 2020.00

of Dimensions: 2.5 x 15.2 x 22.9 cm in acralic material and letter required

and as directed by Engineer incharge

25 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 27.00 Pt. 449.45

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length , in below type of pipe

erected with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a) with

medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete Cat. III

26 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 15.00 Pt. 638.32

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step type electronic fan

regulator mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete Cat. III

27 Point wiring for on board Looped Plug with 6A Modular type switch & 5 8.00 Pt. 257.55

pin socket erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front plate modules

erected on / in wall / ceiling with following type accessories Cat. III

28 Providing following type of Modular Type Accessories mounted with PVC 8.00 Ea. 25.25

/ metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In charge. (7) Blank

Plate Single Cat.III

29 (9) 16 Amp. SP one way switch Cat.III 9.00 Ea. 180.79

30 (10) 6/16Amp. Universal socket Cat.III 15.00 Ea. 199.98

31 (14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch 6.00 Ea. 410.06

32 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 525.00 Mtr. 82.82

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (A) With medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm

33 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 150.00 Mtr. 112.11

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following

size (A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq.

34 (b) 2 wire 6 sq. mm 45.00 Mtr. 147.46

(use earth wire of 4 sq.mm )

36 Providing & erecting Switch board for Computer or electric apparatus 18.00 Ea. 1133.22

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered

with textured/metallic /white front plate,modules erected with necessary

connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III

37 Decorative call bell Ting-tong box type 250 volts complete erected 1.00 Ea. 71.71

38 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt 10.00 Ea. 535.30

to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver (v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet Cat-lll

39 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt 14.00 Ea. 1794.77

to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor more than 0.95, THD <

15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED

driver efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (B) LED Panel Light with provision

for Plane front frame with translucent cover fixed to housing

complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV Cat-III

40 Supplying and erecting led lamps with following wattage capacity of 220 1.00 Ea. 112.11

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder (ii) 5 to 8 watts Cat-III

41 Providing and erecting Miniature circuit breaker single pole 6A to 25A 20.00 Ea. 112.11

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI

42 Providing & erecting 240 V MCB double pole switch for motor & inductive 2.00 Ea. 330.27

load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity (B) 40 Amp. Cat.III

43 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 2.00 Ea. 737.30

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing

box having following capacity (c)63 Amp. Cat.III

44 Providing and erecting Sheet Steel powder coated MCB distribution 1.00 Ea. 629.23

board - flush / surface mounted fitted with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A) single phase incoming and

horizontal single phase outgoing (b) sheet steel double door (IP-43) (i)4

45 Providing and erecting Sheet Steel powder coated MCB distribution 1.00 Ea. 1492.78

board - flush / surface mounted fitted with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A) single phase incoming and

horizontal single phase outgoing (b) sheet steel double door (IP-43) (iv)12

46 Providing and erecting Sheet Steel powder coated MCB distribution 1.00 Ea. 2339.16

board - flush / surface mounted fitted with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (B) three phase incoming and

single phase horizontal type outgoing Per phase isolation type (PPI) (b)

sheet steel double door (i)4 way

47 Providing and erecting Approved make RCCBs conforming to IS: 12640 4.00 Ea. 2235.13

and having sensitivity of 30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected

as directed (ii) 40Amps. DP Cat. III

48 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 3.00 Kg. 794.87

49 Supplying & erecting earth pit of minimum bore dia.150mm size 1.00 Ea. 4591.46

approved make Earthing Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia

of 25 mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover. (A)(approved make

OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge has

to ensure the value of earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture

for long time Necessary test report must be submitted by Agency. (a)

For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

50 Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 15.00 Ea. 2629.03

Star rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent

ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium

blades, 2 nos. canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85,

Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-

2019), THD < 10%, compitible with electronic regulator unit for Speed

Control and all remaining accessories including safety pin, nut bolts,

washers, temperature rise = 75 degree C (Max.), suitable for 140 to

Voltage and rectifier circuit with surge, over current and overload

protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as

required.[ Make shall be approved by Engineer in Charge] (A) 1200 mm

51 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. 15.00 Mtr. 108.07

Pipe down rod erected duly painted for fan complete with proper

insulation without leakage and earthing.

52 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. 15.00 Ea. 98.98

Bolt & Nuts erected with necessary hook of 10 mm M.S. Round Bar.

53 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or 15.00 Ea. 18.18

54 Supplying & erecting approved make low noise decorative exhaust fan 1.00 Ea. 1366.53

having square frame ABS body with inbuilt lowers & square frame.

250mm with 1350 RPM Cat.II

55 Providing and erecting Inverter based approved make split air- 1.00 Ea. 48257.80

conditioning unit consisting of condensing unit with variable speed fan

motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit and

blower motor with its accessories by means of extra supplied proper

insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco

Friendly green gas charging and 15A plug top & Remote Control & MS

Stand) with necessary core cutting. (1)For ISEER Range (KWH/KWH)(3.1

to 3.99) (B) for 1.5 ton capacity - Premium Cat.

56 (C) for 1.7 to 2 ton capacity - Premium Cat. 5.00 Ea. 56353.96

57 Supplying and erecting insulated pair of soft copper tubing open or 30.00 Rmt. 965.56

concealed including power and control cable,necessary PVC drain pipes

for Split AC machine up to 4 TR capacity

58 Supplying and erecting approved make Single phase power conditioners 1.00 Ea. 3076.46

suitable for input voltage 180V / 280V, output voltage 220V (+ / - 10%)

AC 50 ‘Hz with electronic relays & component of housed in sheet metal

cabinet ‘with epoxy powder coated, with high - low cut-off, time delay,

voltmeter, selector switch, 5/15 A universal socket with range off (C)

60 Providing & erecting water cooler having storage capacity 150 Ltr. & 1.00 Ea. 55893.40

cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet

temp. of the water should drop by 15˚C within a hour, The water cooler

should be comprising of hermetically sealed compressor, fan motor,

condensing unit, water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with necessary inlet & outlet connection.

The body of water cooler will be made from Stainless Steel.

61 Supplying & erecting 5 stage single reverse osmosis water purification 1.00 Ea. 29187.99

system with M.S. powder coated frame, prefilter housing with 'O' ring

presediment filter GAC filter, carbon filter suitable buster DC pump

capacity 80 psi, mention with 40 psi inline type post carbon filter auto

low & high pressure switches with following size of storage tank & LPH

capacity & erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos booster

Rupees Thirty One Lakh(s) Twenty Eight Thousand Nine Hundred Fifty Five And Paise Fouty Five Only

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 3128955.45 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with

detailed specification and details of work and amount Involved at site without any payment as directed by Engineer-In-

2 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

3 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor

under his sign.

4 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work

under all condition, site, moisture/ weather etc.

5 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government

Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the

6 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by

Executive Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to

7 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other

Construction works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated

9/12/2005 notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department Letter no

8 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of

Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

9 Contractor are advised to visit site before loading tender rate.

10 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and

drainage & water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his

11 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

12 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

13 GST and Income tax TDS will be deducted at a source while making payments of bills.

14 GST will be paid extra as per Govt. amendment.

15 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender

Document of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer Executive Engineer

Ele. (R&B) Division Valsad (R&B) Division