Construction of Community Centre at Bhadrehar in Tehsil Nagrota Bagwan Distt Kangra (HP) (SDP/2023/563). (SH-Construction of Civil work etc)

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m (One point five metre) in width or 10 sqm (Ten square metre) on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m (One point five metre), including getting out the excavated soil and disposal of surplus excavated soils complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government.

Supplying, filling, spreading & leveling stone boulders under floors complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts square rectangular polygonal in plan including mouldings, cornices etc; complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera; with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Lintals beams, plinth beams, cantilevers, girders complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings balconies and access platform in all height inlcuding providing trusses etcetra for smooth ply of vehicle in double lanes etcetra complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls upto any width where ever required as per Architectural drawing and the like floor etc; complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level cement concrete 1:4:8 (One cement; four sand; eight graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and curing complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (One cement : One and Half coarse sand): Three graded stone aggregate 20 mm nominal size) complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government.