Construction of Library Building Of Nava Sudasana. Ta-Satlasana Dist-Mahesana ( Toilet Block, Plumbing, Colour Work, Building, Flooring, Paver Block, Aluminium Section, And Plaster Work )

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone

3 aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation 32.00 Cmt 2559.89

and Plinth

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

4 formwork and excluding the cost of reinforcement for reinforced concrete work in (A) Foundations, 19.00 Cmt 4347.45

footings, Base of columns and Mass concrete.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

5 formwork and excluding the cost of reinforcement for reinforced concrete work in (D) Columns, 5.00 Cmt 5000.90

PEDESTAL UPTO PLINTH LEVEL.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

formwork and excluding the cost of reinforcement for reinforced concrete work in (C) Slabs,

landing, shelves, Balconies , Lintels, Ground Beams & Plinth beam, Girders and Cantilever upto

floor two level.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in

layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.

Brick work using common burnt clay building bricks having crushing strength not less than

8 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) 13.00 Cmt 3299.58

Conventional

Providing and casting in situ ordinary cement concrete M-150 for coping, over riding returns

including formwork curing and finishing complete.

Filling in plinth with sand under floors including watering ramming, consolidating and dressing

Brick work using common burnt clay building bricks having crushing strength not less than

11 kg./Sq.Cm. in super structure in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B)Conventional for 31.00 Cmt 3567.83

Ground Floor

Brick work using common burnt clay building bricks having crushing strength not less than

12 kg./Sq.Cm. in super structure in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B)Conventional For 11.00 Cmt 3600.79

First Floor

Half brick masonry in common brunt clay building bricks having crushing strength not less than

13 Kg/Sq.Cm. in Cement mortar 1:5 (1- Cement : 5 -coarse sand ) in foundation and plinth (B) 19.00 Cmt 551.62

Conventional For Ground Floor

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

formwork and excluding the cost of reinforcement for reinforced concrete work in (D) Columns,

Pillars posts and struts, upto ground floor level.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

formwork and excluding the cost of reinforcement for reinforced concrete work in (D) Columns,

Pillars posts and struts, ground floor two first floor level.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

16 formwork and excluding the cost of reinforcement for reinforced concrete work in (D) Columns, 15.00 Cmt 6348.80

Pillars posts and struts, upto floor two level Slab beam ground floor

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

17 formwork and excluding the cost of reinforcement for reinforced concrete work in (C) 26.00 Cmt 6607.30

Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever upto floor two level. GF

Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of

18 formwork and reinforcement for reinforced concrete work in © Slabs,landing,shelves, Balconies 2.00 Cmt 4799.15

Lintels, Beams, Girders and Cantilever upto floor two level.GF

Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of

19 formwork and reinforcement for reinforced concrete work in © Slabs,landing,shelves, Balconies 2.00 Cmt 4799.15

Lintels chhajja, Beams, Girders and Cantilever upto floor two level.GF

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing TMT Bar FE500D reinforcement for R.C.C. work including bending, binding and placing

in position complete upto floor two level

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering

upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand) GF

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick

22 walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 216.00 Smt 175.98

1:3 (1-cement:3-sand) GF

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick

23 walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 49.00 Smt 198.79

1:3 (1-cement:3-sand) FF

Providing 20 mm thick sand faced cement plaster With Gutka Finishon walls for all height above

ground level consisting of 12mm thick backing coat of cement mortar 1:3 (1 cement : 3 sand) and

8mm thick finishing coat of C.M. 1:1 (1 cement : 1 sand) including making necessary cornices as

directed etc. complete.For all heights

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of

25 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white 5.00 Smt 947.02

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 mm x

26 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 27.00 Smt 1417.03

cement : 3 coarse sand) & jointed with white cement slurry. Wall Tiles

Providing and fixing Table top wash basin of Size 610x450mm (Brand Varmora or equivalent) with

C.P. brass waste for washbasin or sink. & 32mm pillar tap, Bottal trap capstan head, screw down

high pressure with screws, shanks and back nuts. (i) 32mm dia. Providing and fixing brass screw

down stop tap. (A) 32mm dia.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

Providing and fixing side hunge Single shutter Door including using I.T wood frame having size

13x7.5 cm,shutter frame of indian teakwood of 38 mm thick and pannel of both side prelaminated

29 particle board 19 mm thick of natural wood grain shed with fixing of 2x3 cm T.W. moulding on both 8.00 Smt 3434.99

side, fixing of 5 mm thick tranparent glass in top ventilator as per detail drawing including three coat

of oil paint with primer etc complete as per instruction of Engineer in charge & approved make.

Providing and fixing factory made polyvinyl chioride (PVC) door frame of the size 50 x 47 mm with

a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre out of two corners

and joined with 2nos. of 150mm long brackets of 15 x 15mm M.s. Square tubes. The two vertical

door profiles are to be reinforced with 19 x 19 mm m.s. square tube of 19 gauge, EPDM rubber

gasket weather seal to be provided through out the frame. The door frame shal be fixed to the wall

using 65/100 mm long M.S. screws through the frame by using PVC fasteners. A miniumum of 4 nos.

os screws to be provided for each vertical members and minium 2 nos. for horizontal members etc.

complete as per manufactures specification and direction of Engineer in charge.

Providing and laying water proofing tretment with chaina mosaic tiles flooring over avg 40 mm C.C.

1:2:4 {1 Cement : 2 sand : 4 Kapachi / Gritt 6 to 12 mm size} bedding for maintaining slope for plain

and curve surface & 12 mm to 20 mm of broken piece of seramic / glazed tiles ( one for more color

as directed ) to be laid over cement mortar bedding of C M 1:3 (1 cement : 3 sand ) containg one Kg

of water profing materials per bag of O P C at plain or / and slops and to be tempered to bring mortar

eramic up to surface with using white cement and colour pigment including rounding of junctions and

extending them up to 15 cm along the wall and curing with bends any pattens or design as per

drawing and cleaning by using oxalic acid etc complete.

Providing erecting and fixing double coated ISI water tank of required capacity each with all

32 2000.00 Litre 3.95

necessary fittings and connection etc. complete on terrace

Applying general insecticide pest control treatment to floors, cupboards etc including labour

materials etc.complete. Using Imidacloprid 30.5 SCas Per IS 6313 part-II( (0.075% concentration by

mass) is recommended 10.5ml chemical diluted with 5 liters of water application 0.5 litre chemical

/Sqm of surface is recommended as per I.S.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

undecorated wall surface to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered smooth including.Applying two coats of

acrylic laphy (putty) & two coats of primer of approved brand and manufacture on new wall surface

to give an even shade including thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth and soffits of slab.

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and fixing 600 mm x 450 mm beveled edge mirror of superior glass mounted on 6 mm

35 thick A.C sheet or plywood sheet or PVC framing and fixed to wooden plugs with C.P. brass screw 2.00 Each 833.73

and washers.

Wall Painting two coats with weather proof acralic exterior emulsion paint of approved brand and

manufacture and of required shade on exterior wall surface to give an evev shade over and including

36 a primary coat with alkaly resistance primer of approved brand after throughly brushing the surface to 344.00 Smt 110.76

remove all dirt and remain of loose powdered materials etc complete for all height as per instruction

of Engineer in charge & approved make.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per

37 approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and 61.00 Smt 680.14

filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc.

Providing and fixing water closet squatting pan (Indian type W.C pan) size 580 mm (earthwork,

38 bed concrte, foot rests,Flush Cock and trap to be measured and including paid) (A) Vitreous China (I) 2.00 Each 1366.72

Long pattern white as directed and approved by engineer incharge..

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg.) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single pipe line..

40 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg. 3.00 Each 958.17

Providing and fixing chromium plated brass half turnflush cock including fixing in pipe line etc.

complete.(ii) 25mm dia

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working PVC pipes of the following out

42 side dia. Special density complete with special flange compression type fitting,wall clips etc. 10.00 RMT 133.32

including making good the wall ceiling and floor.(F) 75 mm dia

Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning

43 design with C.I. screaed down or higned grating including cost of cutting and making good the walls 4.00 Each 603.97

and floor 100mm inlet and 50mm outlet.(C) 100mm dia.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I.

44 cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 2.00 Each 1292.19

100mm x 100mm size P type.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

45 help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings 5.00 RMT 72.65

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

46 help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings 20.00 RMT 91.84

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

47 help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings 20.00 RMT 148.12

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

all materials.

Providing and fixing Pillar Tap, capstan head, screw down high pressure with screws, shanks and

back nuts (i)15 mm dia,

Providing and fixing to wall, ceiling and floor 10.0 Kg f/cm2 working pressure polyethylene pipes of

49 the following outside dia. Low density, complete with special flange compression type fittings wall 30.00 RMT 336.24

clamps etc. including making good the wall, ceiling and floor. (G)110 mm dia

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs

with C.P. brass scews.(B)600mm x 20mm size.

51 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. Each 2.00 Each 282.16

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

52 Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 40 mm dia. 1.00 Each 663.43

53 Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. 1.00 Each 420.63

Construction of a soak well of size 1.50 m Diameter and 2.40 m Deep. as per the approved drawing

& design etc.in all sort of soil complete as directed and approved by engineer incharge.

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats

55 at required spacings and frame alround, square or round bars with round headed bolts and nuts or by 530.00 Each 101.23

screws (A) Plain Grill.

Painting Two coats (including priming coat) on New steel & other Metal surfaces with synthetic

56 enamel Piinr brushing to give an even shade including cleaning the surface of all dirt, dust and other 27.00 Smt 122.89

foreign matter.

Construction of a septic tank of size 3.60 m X 1.15 m X 1.50 m. as per the approved drawing &

design etc.in all sort of soil complete as directed and approved by engineer incharge.

Providing and fixing window having extruded aluminum Colour anodized section frame main outer

size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track member size 122.20mm x

31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of size 122.20mm x 31.75mm x 1.50mm

58 @1.398 kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm@ 11.00 No 2140.33

0.456kg/mt ,vertical member of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc complete for window.

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm @

59 Wt. 0.643 Kg/mt with colour anodized alluminium frame for ventilation with 5 mm thick frosted 1.00 No 1175.56

glass as details etc complete for Ventilation

Providing & fixing granite stone average 18 mm thick machine-cut & machined polished stone in

treads of steps, sill, copings, parapet top, window sill, planter top, and such other locations, laid on

mm(average) thick cement mortar 1:4 (1 cement:4coarse sand) and jointed with Super flex guranted

fixing solution by kerakoll mixed with pigment to match the shades of the slabs, including rubbing

and polishing complete. The Stone used should be in one single long piece up to 3000 mm as per

drawing or as directed by Engineer-in-charge. The exposed projected edges shall be of uniform

thickness and of uniform projection including molding , chamfering, rounding, polishing complete.

(basic rate of granite- 160rs/sq.ft)

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps and

61 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with 149.00 No 1073.13

flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry

Providing and fixing Urinal or approved qality including conecting the Urinal with waste pipe , tap

etc. complete. (A) White earthenware flat back or corner type size 430mm x 260mm x 350mm.

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires,

in below type of pipe to be erected complete with earth continuity and necessary connection with

primary light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling

rose / H.D.Connector as directed. Note:- Maximum up to 6 mtrs length, excess will be considered as

Mains for Secondary Point. (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of

65 following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with 13.00 Pts. 485.81

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat.

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC

67 / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front 7.00 Pts. 257.55

plate modules erected on / in wall / ceiling with following type accessories Cat-III

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single

68 mounting base frame covered with textured / metallic/ white front plate , modules erected with

necessary connection. As desired by Engineer In charge

(1)One No. SP 6 Amp.Cat. III 23.00 Nos. 151.50

(2) One No 5 pin plug Cat. III 23.00 Nos. 151.50

(7) Blank Plate Single Cat. III 10.00 Nos. 25.25

(8) Computer RJ-45 socket Cat. III 3.00 Nos. 160.59

(9) 16 Amp. SP one way switch Cat. III 5.00 Nos. 180.79

(10) 6/16Amp. Universal socket Cat. III 5.00 Nos. 199.98

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be

69 erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with 90.00 Mtr 24.24

adhesive solution & Clamps with following dia of pipes, in approved manner as directed (a)20 mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with

sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm 75.00 Mtr 112.11

(b) 2 wire 6 sq. mm 16.00 Mtr. 147.46

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction

Providing & erecting Switch board for Computer or electric apparatus consisting of following

modular type accessories mounted with PVC / Metallic concealed/open box with single mounting

base frame covered with textured/metallic /white front plate,modules erected with necessary

74 connections as directed 3.00 Nos. 1133.22

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat-III

75 Decorative call bell Ting-tong box type 250 volts complete erected 1.00 Nos. 71.71

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

76 CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

ranges shown.)

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing

complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV Cat-III

(H) Mirror Light 9 Watts, wall mounted minimum 1 feet long 2.00 Nos 312.09

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of

3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminium housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency >

%.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of

ranges shown.) (A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (iii) above 24 to 36 watts Cat-lll

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V

78 A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 16.00 Nos. 112.11

8828/1996 with ISI Mark Cat-III

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA

79 breaking capacity & confirms to IS : 8828 in existing box having following capacity (B) 40 3.00 Nos. 295.93

Amp. Cat.III

80 Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB. 2.00 Nos. 176.75

Replacing old & U/S SIngle Phase 8 Way DB by New Providing and erecting Sheet Steel powder

coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos.

of MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43) (v) 16 way 1.00 Nos. 1680.64

providing and erecting Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on

82 single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & 1.00 Nos 2235.13

do not incorporate any electronic component. for following Max. rating erected as directed

(ii) 40Amps. DP Cat-III

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser

83 A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or clamp with 16.00 Nos. 1596.81

earthing. [Make shall be approved by Engineer in charge]

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation without leakage and earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm

85 length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected 16.00 Nos. 108.07

concealed in Ceiling with necessary finishing.

86 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. 16.00 Nos. 18.18

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS

body with inbuilt lowers & square frame. 200mm with 1350RPM Cat.II

Supplying and erecting Direct - On - Line Starter with 18 A. rating contactor and with 3.5 Amp. 18A

88 range directly operated in totally insulated elegant enclosure for single phase operation up to 3 HP as 1.00 Nos 2100.80

per IS 13947 complete erected on P.W. Block with necessary connection. Cat-lll

Providing & erecting open well type horizontal mono block pump set with stainless steel body having

89 following specification (A) 0.5 H.P. single phase open well motor pump set having discharge of 1.00 Nos 7934.56

115 LPM @ 15 mtr. head suitable for 32 mm dia. delivery pipe with control panel Cat.III

Lowering of submersible motor pump set at the depth of following ,complete with required. Nos. and

size of casing pipes erected by means of proper chain pulley block & pipe wrenches after checking of

threads of each pipe with coupling to take the load of the pump set and pipe assembly filled up with

water (D)For Open well Horizontal submersible pump set for sump well (i) 1 HP to 5 HP

Providing Water proof straight Joint in PVC insulated flat flexible copper cable by using insulating

material, water proofing material, & making the joint complete. (A) Up to 10Sq. mm

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper

cable approved make of following Size. (I) 2 Core x 2.5 Sq. mm

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour

@ an ambient temp of 45˚ C. The outlet temp. of the water should drop by 15˚ C within a hour, The

93 water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, 1.00 Nos 49559.69

water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet &

outlet connection. The body of water cooler will be made from Stainless Steel. ◦

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder

coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon filter suitable

94 buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon filter auto low & high 1.00 Nos 29187.99

pressure switches with following size of storage tank & LPH capacity & erected as directed [C]

Ltr / Hr with 150 psi 2 nos booster pump

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe

95 with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth 1.00 Nos 368.65

96 For using salt and charcoal / coke as required for pipe type earthing. 1.00 Nos 171.70

Supplying and erecting B class galvanised iron pipe 32 mm outside dia 45 cm long duly welded on

97 cm x 20 cm x 3 mm thick M.S. base plate, erected on wall or corner for mounting street light 4.00 Nos 343.40

luminaire with necessary hardware materials duly painted.

Total Tender amount

Rupees Thirty Two Lakh Eighty Seven Thousand Five Hundred Fifty Two And Paise Seventy Four Only

I/am we/are willing to carry out the work at _____% above /below _____________ percent (should be written in figures and words) of the estimated rates mentioned above. Amount of

my/our tender works out as under.

* Estimated amount put to tender

Deduct :_____ % Below Rs.________________ Add :_____ % Above Rs.________________

Net Rs. ______________________ Total Rs. ______________________

In words ___________________________ In words __________________________

1. The Contractor Shall Exhibit a board with deatiled specification and details of work as directed by the Engineer-In-Charge for which no Extra Payment shall be made.

2. The labour crss will be deducted as per prevaling Rules i.e 1% of the work done.

3. GST and Income tax TDS will be deducted at a Source while making Payments of bills.

4. In all RCC items in Rate Analysis Standard cement Consuption has been taken as per Govt.G.R: PRC -10/2017 cement consumption/16/c, Date: 11/05/2017 as

stated i. S.O.R therefore in RCC Items where there is a changed as per actual mix design the cost of diffrence of cement consumption have been deduvted from the

rate of orignal item at the rate of input rate mentioned in all the tender.

Above all items of " Schedule-B" with iem Description,Unit,Rate & Amount Have verified by me and found Order.

Deputy Executive Engineer Executive Engineer

R & B ( Pan )Sub Division R & B (Pan) Division

Kheralu Mahesana