J&K

Active

Works

Civil Works

Upgradation of Science Laboratories at GDC Sunderbani (2nd call)

Public Works Department

Nowshera | Rajouri, Jammu And Kashmir

Amount: ₹96 LCloses: 10 Oct 2026Due today

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published1 Oct 2026
Pre-Bid Meeting5 Oct 2026
Closes10 Oct 2026
Bid Opening12 Oct 2026

Tender Value

₹96 L

EMD Value

₹1.9 L

Closing Date

10 Oct 2026, 4:00 pmDue today

Tender Inviting Organisation

Name

XEN PWD Division Nowshera

Address

XEN PWD Division Nowshera

Work Description

Upgradation of Science Laboratories at GDC Sunderbani (2nd call)

Tender Information

Tender ID

2026_PWDJK_326706_1

Reference Number

enit 100 of 2026-27

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Location

Nowshera

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

3 documents required · 3 mandatory

Fee/PreQual/Technical

RequiredScanned copy of CDR (.pdf)

RequiredScanned copy of Challan (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,500

Tender Fee Payable To

XEN PWD Division Nowshera

EMD Fee Amount

₹1.9 L

Pre-Bid Meeting

Meeting Place

XEN PWD Division Nowshera

Important Dates

Last Activity

1 Oct 2026

Published

1 Oct 2026

Bid Opening

12 Oct 2026

Download Starts

1 Oct 2026

Download Ends

10 Oct 2026

Submission Starts

1 Oct 2026

Pre-Bid Meeting

5 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (56 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	‘C’ Frame System made up of 60 mm x 30 mm rectangular pipe of 2 mm thickness, with Frame having 3 projecting pipe sections of 60 mm x 30 mm with thickness of 2 mm on the back; with the leveller at the bottom. All frame work must be pre - treated with superior pure epoxy powder coating of 50 - 60 micron. L-700 mm x H - 875 mm x D -30 mm. The C - Frames should have enough strength for suspending storage cabinets capable of fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout.	150	No	5,455	₹8,18,250
2Providing & Fixing Horizontal Connecting Sets should comprise of 4 elements. One Front Connecting Beam & One Back Connecting Beam, each made up of 2 mm thick Sheet formed in a “C” section, Beams are removable. One Bottom Skirting type connecting Bar & One Centre Beam should be placed between Back Beam & Skirting Beam. Together with the C Frames & Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed & the hanging-type storage cabinets can be suspended.
2.1	Connecting Set of L-1500 mm for C Frame Structure	2	No.	9,020	₹18,040
2.2	Connecting Set of L-1350 mm for C Frame Structure	15	No.	8,064	₹1,20,960
2.3	Connecting Set of L-1200 mm for C Frame Structure	90	No.	7,536	₹6,78,240
2.4	Connecting Set of L-850 mm for C Frame Structure	3	No.	5,660	₹16,980
2.5	Connecting Set of L-750 mm for C Frame Structure	3	No.	5,030	₹15,090
2.6	Connecting Set of L-600 mm for C Frame Structure	3	No.	4,500	₹13,500
3Supply & Fixing of Storage Boxes made up 100% Epoxy Powder Coated CRCA Virgin TATA ® / MITTAL ARCELOR make Sheet, powder coating thickness of 50 - 60 microns, Sheet Thickness of 0.8 mm for All Body, Shutters & Drawers are of sandwich type. All Modules should go in Knock Down condition & assembled & fitted at site. Shutters should have exposed S.S.-304 butt hinges or Self Closing CED Coated Concealed Hinges. All joinery Hardware is to be of SS-304 Bolting system. Handles should be “D” type made up of SS-304, 8 mm thick Solid Rod, with nickel-chrome plating and further a Lacquer Coat.
3.1	Storage Size, L-600 mm x D-530 mm x H-635 mm, 1 Drawer / 2 Shutters	116	No.	22,078	₹25,61,048

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.77 MB

Work Item Documents

BOQ_1105201.xls

BOQ • 0.34 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

‘C’ Frame System made up of 60 mm x 30 mm rectangular pipe of 2 mm thickness, with Frame having 3 projecting pipe sections of 60 mm x 30 mm with thickness of 2 mm on the back; with the leveller at the bottom. All frame work must be pre - treated with superior pure epoxy powder coating of 50 - 60 micron. L-700 mm x H - 875 mm x D -30 mm. The C - Frames should have enough strength for suspending storage cabinets capable of fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout.

150

5,455

₹8,18,250

2Providing & Fixing Horizontal Connecting Sets should comprise of 4 elements. One Front Connecting Beam & One Back Connecting Beam, each made up of 2 mm thick Sheet formed in a “C” section, Beams are removable. One Bottom Skirting type connecting Bar & One Centre Beam should be placed between Back Beam & Skirting Beam. Together with the C Frames & Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed & the hanging-type storage cabinets can be suspended.

2.1

Connecting Set of L-1500 mm for C Frame Structure

No.

9,020

₹18,040

2.2

Connecting Set of L-1350 mm for C Frame Structure

No.

8,064

₹1,20,960

2.3

Connecting Set of L-1200 mm for C Frame Structure

No.

7,536

₹6,78,240

2.4

Connecting Set of L-850 mm for C Frame Structure

No.

5,660

₹16,980

2.5

Connecting Set of L-750 mm for C Frame Structure

No.

5,030

₹15,090

2.6

Connecting Set of L-600 mm for C Frame Structure

No.

4,500

₹13,500

3Supply & Fixing of Storage Boxes made up 100% Epoxy Powder Coated CRCA Virgin TATA ® / MITTAL ARCELOR make Sheet, powder coating thickness of 50 - 60 microns, Sheet Thickness of 0.8 mm for All Body, Shutters & Drawers are of sandwich type. All Modules should go in Knock Down condition & assembled & fitted at site. Shutters should have exposed S.S.-304 butt hinges or Self Closing CED Coated Concealed Hinges. All joinery Hardware is to be of SS-304 Bolting system. Handles should be “D” type made up of SS-304, 8 mm thick Solid Rod, with nickel-chrome plating and further a Lacquer Coat.

3.1

Storage Size, L-600 mm x D-530 mm x H-635 mm, 1 Drawer / 2 Shutters

116

No.

22,078

₹25,61,048